FCC ID: 2ADQOMDNA18 Wi-Fi Smart Kit

NOTE:

Company will not be liable for any issues and problems caused by Internet, Wi-Fi Router and Smart Devices. Please contact the original provider to get further help. USER MANUAL OF SMART Kit CE-OSK201 20180511 IMPORTANT NOTE:

Read the manual carefully before installing or connecting your Smart kit. Make sure to save this manual for future reference. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help. Company name/address:

GD Midea Air-Conditioning Equipment Co.,Ltd Add: Midea Industrial District , Beijiao ,Shunde, Foshan, Guangdong , Peoples Republic of China Product name: Smart Kit ModelCE-OSK201 FCC ID: 2ADQOMDNA18 IC: 12575A-MDNA18 This device complies with Part 15 of the FCC Rules and RSS 247 of Industry & Science Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. CONTENTS 1 2 3 4 5 6 7 8

...................................................1 SPECIFICATION PRECAUTIONS....................................................1 DOWNLOAD AND INSTALL APP ...........................2 INSTALL THE SMART KIT .....................................3 USER REGISTRATION .........................................4 NETWORK CONFIGURATION ...............................5 HOW TO USE APP ..............................................13 SPECIAL FUNCTIONS ........................................15 DECLARATION OF CONFORMITY Hereby, we declare that this smart kit is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity may be consulted with sales agent. SPECIFICATION 1 Model: CE-OSK201 Standard: IEEE 802.11b/g/n Antenna Type: Wxternal omnidirectional Antenna Frequency:WIFI2412-2462MHz Maximum Transmitted Power: 20dBm Max Operation Temperature:0 Operation Humidity:10%~85%

Power Input: DC 5V/300mA 2 Applicable system: IOS, Android. PRECAUTIONS C~45 C/32 F~113 F. O O O O Note:

APP can not support the latest software version of Android and IOS system. Due to special situation may be occurred, we explicitly claims below: Not all of the Andriod and IOS system are compatible with APP. We will not be responsible for any issue as a result of the incompatibility. Wireless safety strategy Smart kit only support WPA-PSK/WPA2-PSK encryption and none encryption . WPA-PSK/WPA2-PSK encryption is recommended. Caution Please Check The Service Website For More Information. Smart Phone camera needs to be 5 million pixels or above to make sure scan QR code well. Due to different network situation, sometimes, request 1 time-out could happen, thus, it is necessary to do network configuration again. Due to different network situation, control process may return time-out sometimes. If this situation occurs, the display between board and App may not be the same, please do not feel confused. NOTE: Company will not be liable for any issues and problems caused by Internet, Wi-Fi Router and Smart Devices. Please contact the original provider to get further help. 3 DOWNLOAD AND INSTALL APP 4 1 INSTALL THE SMART KIT Remove the protective cap of the smart kit 2 3 Open the front panel and insert the smart kit into the reserved interface. Attach the QR code packed with SMART KIT to the side panel of the machine, ensure it is convenience to be scanned by the mobile phone. Alternatively, user can take picture of the QR Code and save in into their own phone. Insert QR Code A QR Code B Caution: QR Code A and QR Code B is only available for downloading APP. Android Phone users: scan QR Code A or go to google play, search 'Nethome Plus' app and download it. I phone Users: scan QR Code B or go to App Store, search 'Nethome Plus' app and download it. 2 WARNING:This interface is only compatible with SMART KIT provided by the manufacturer. 3 USER REGISTRATION 5 Please ensure your mobile device is connected to Wifi router. Also, the Wifi router has already connected to Internet before doing user registration and network configuration. registration account by clicking link in case you forget the password. It is better to log in your email box and active your S IM 08:42 65%

VI50828_a

(

Legal E-mail address

)

(Password : 8 numbers + one letter minimum)

(Retype password) Sign in

(Continue)

(Login with existing user) Forgot password?

(Enter First Name)

(Enter Last Name)

(Enter Mobile Phone)

(Enter City)

(Enter Number)

(Enter Street)

(Agree to terms)

(Marketing)

(Register) 6 NETWORK CONFIGURATION Caution:

It is necessary to forget any other around network and make sure the Android or IOS device just connect to the WIFI network you want to configure. Make sure the Android or IOS device WIFI function works well and can be connected back to your original WIFI network automatically. Kindly reminder:

When AC enters into AP mode, the air-conditioning remote controller can't control it. It is necessary to finish network configuration or power the AC again in order to control it. Alternatively, you need to wait 8 minutes to let the AC quit AP mode automatically.

'

'

'

'

Using Android device to do network configuration Make sure your mobile device has already been 1 connected to the wifi network which you want to use. Also, you need to forget other irrelevant wifi network in case it influences your configuration process. Disconnect the power supply of AC. 2 3 Connect the power supply of AC, and continuously press the digital display button or do not disturb button seven times in 3 minutes.

'

When the AC displays AP , it means that the AC WIFI has already entered into AP Mode. 4

'

'

'

Some type of AC do not need the step to be in AP mode 2 1 Enter E-mai Address 2 and passowrd, press continue Enter your personal information and adress, and then click Register . 4 5

(Scan QR)

(Manual QR)

(Mac Address)

(Serial number)

(Continue) 2 QR codes to be scanned: IDU QR which is pasted on IDU and Wi-Fi QR which is packed with the Wi-Fi module This is the Manual Entering QR page in case of Camera failuer Wi-Fi is connecting Choose net_ac_XXXX Type default password:

net_ac_XXXX Name the A/C and press continue 6 7 Using IOS device to do network configuration Make sure your mobile device has already been 1 connected to the wifi network which you want to use. Also, you need to forget other irrelevate wifi network in case it influences your configuration process. Disconnect the power supply of AC(some units). 2 3 Connect the power supply of AC, and continuously press the digital display button or do not disturb button seven times in 3 minutes. When the AC displays AP , it means that the AC WIFI

'

has already entered into AP Mode. 4

'

'

'

(1st QR Scan)

(2nd QR Scan)

(Manual QR)

(Manual QR) IDU and Wi-Fi QR which is packed with the Wi-Fi module Two QR codes to be scanned:

IDU QR which is pasted on IDU and Wi-Fi QR which is packed with Wi-Fi 8 This is the Manual Entering QR page in case of Camera failuer 9 No S IM 20:14 61%

No S IM 20:14 61%

Settings WLAN CHOOSE A NET WORK..... Joining net_ac_0010

"

"

.... Cancel Enter Password Join Password ASUS-5GX ASUS-2.4GX bdptest1 bdptest1-5G HIWIFI-22EF60 Midea midea_fc_6866 MideaACIOT net_ac_0010 zztest Choose net_ac_XXXX Type default password:

net_ac_XXXX and click

"Join "

Return to APP and type net_ac_XXXX Type default password:

net_ac_XXXX Name your a/c and click continue 10 11

Class II permissive change request letter Date (2020-06-16) TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL REF: Class II permissive change, pursuant to section 2.1043, for Product: Smart Kit Model: CE-OSK201 FCC ID: 2ADQOMDNA18 Dear Sir or Madam, Pursuant to section 2.1043, GD Midea Air-Conditioning Equipment Co.,Ltd Hereby submit a request for class II permissive change to our Smart Kit, model no.: CE-OSK201, FCC ID: 2ADQOMDNA18, original Grant date: 08/16/2018. Description of the change:

- Updated the memory chip from EE-SOIC8-25/8M-204-T(memory capacity is 8MB) to EE-SOIC8-

25/16M-204-T(memory capacity is 16MB). There is no change on circuit design, PCB layout and RF function. For more detailed information please check:

-Schematics

-Parts List

-Internal Photos So in this FCC C2PC application: Smart Kit, model no.: CE-OSK201, FCC ID: 2ADQOMDNA18,

-New test reports 64.790.18.01983.02 for DTS according to Part 15C was submitted in this application, and in this test report, output power and radiated spurious emission were the new test data, other test data please referred to original test report 64.790.18.01983.01, and the test data are still effective. Yours sincerely, Jim Xu Company Officer:

Telephone Number:

Email: jim_xu@midea.com.cn

+86-757- 26339413

COMPANY LETTERHEAD Date (2020-05-15) TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Confidentiality Request FCC ID:2ADQOMDNA18 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission's Rules,

(GD Midea Air-Conditioning Equipment Co.,Ltd, Adress: Lingang Road, Beijiao, Shunde FOSHAN, Guangdong 528311 China (Peoples Republic Of)) hereby requests permanent confidential treatment of information accompanying this application as outlined below:

Schematics Bill of Materials/Parts List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Company Officer: Jim Xu y m YA Telephone Number: +86-757- 26339413 Email: jim_xu@midea.com.cn