FCC ID: E5MDS-MERCODU5 Wimax Industrial Radio

 

MDS Mercury Series Secure, Long Range IP/Ethernet & Serial l i e d a u u G n a n M o i t l i a a r c e n p h O c e d T n a n o Covering Subscriber, Base, and Outdoor units (ODUs) of the Mercury 16E Series MDS 05-6302A01, Rev. B.1 OCTOBER 2011 i t a l l a t s n I Featuring W eb-B ased D evice M anager Need Quick-Start instructions for this product? Please refer to publication 05-6301A01. All GE MDS user guides are available online at www.gemds.com TABLE OF CONTENTS 1.0 PRODUCT DESCRIPTION................................................................................................... 1 1.1 Product Models .............................................................................................................................2 1.2 Key Features .................................................................................................................................2 1.3 Key Specifications .........................................................................................................................3 2.0 QUICK-START INSTRUCTIONS.......................................................................................... 4 2.1 Connecting to the Device Manager ...............................................................................................4 2.2 Configure IP Address and Identity .................................................................................................5 2.3 Basic Connectivity .........................................................................................................................7 Setup for Maximum Throughput ......................................................................................................9 3.0 FEATURE DESCRIPTIONS ................................................................................................. 9 3.1 Security Features ..........................................................................................................................9 Overview ..........................................................................................................................................9 Authentication ..................................................................................................................................9 User Authentication........................................................................................................................10 PKMv2 Device Authentication........................................................................................................10 X.509 Certificates........................................................................................................................... 11 3.2 Multiple In / Multiple Out (MIMO) Operation ................................................................................ 11 3.3 ARQ and Hybrid ARQ .................................................................................................................12 ARQ Setup.....................................................................................................................................12 HARQ Setup ..................................................................................................................................13 4.0 Performing Common Tasks................................................................................................. 14 4.1 Basic Device Management ..........................................................................................................14 USB Console .................................................................................................................................14 Using Configuration Scripts ...........................................................................................................15 Perform Firmware Upgrade ...........................................................................................................16 Instructions for Completing the Firmware Upgrade Process (Applies to all loading methods above) 17 Configuring Networking Features for VLAN...................................................................................18 Configure Serial Data Interface for TCP, UDP, MODBUS..............................................................21 Configure QOS ..............................................................................................................................25 Flow Parameters............................................................................................................................26 Quality of Service (QoS) Screen....................................................................................................27 Creating a Service Flow.................................................................................................................28 QOS Example: Low Latency..........................................................................................................28 QOS Example: Controlling Bandwidth in Video Applications.........................................................28 QOS Example: Prioritizing a Data Flow .........................................................................................29 4.2 CONFIGURE SECURITY FEATURES & INTEGRATION WITH A RADIUS SERVER ...............31 Device Management Interface Configuration.................................................................................31 MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual i User Accounts................................................................................................................................31 4.3 RADIUS Server Configuration .....................................................................................................32 Creation of X.509 Certificates ........................................................................................................33 Load X.509 Certificates..................................................................................................................33 Configure SNMPV3........................................................................................................................34 4.4 Use of the Antenna Alignment Tool .............................................................................................36 5.0 TROUBLESHOOTING........................................................................................................ 36 5.1 LED INDICATORS .......................................................................................................................36 5.2 WiMAX Statistics .........................................................................................................................37 5.3 Common Troubleshooting Scenarios ..........................................................................................37 6.0 SITE INSTALLATION GUIDE ............................................................................................. 38 6.1 General Requirements ................................................................................................................39 Mounting Considerations ...............................................................................................................40 6.2 Site Selection ..............................................................................................................................40 6.3 Equipment Grounding .................................................................................................................41 6.4 LAN Port ......................................................................................................................................41 6.5 COM1 Port ..................................................................................................................................42 6.6 Antenna & Feedline Selection .....................................................................................................42 Antennas........................................................................................................................................43 Feedlines .......................................................................................................................................43 GPS cabling & Antenna .................................................................................................................44 6.7 Conducting a Site Survey ............................................................................................................44 6.8 A Word About Radio Interference ................................................................................................45 6.9 Radio (RF) Measurements ..........................................................................................................45 Transmitter Power Output and Antenna System SWR ..................................................................46 Antenna Heading Optimization ......................................................................................................46 7.0 dBm-WATTS-VOLTS CONVERSION CHART.................................................................... 47 8.0 PERFORMANCE NOTES................................................................................................... 48 8.1 Wireless Bridge ...........................................................................................................................48 8.2 Distance-Throughput Relationship ..............................................................................................49 8.3 Data LatencyTCP versus UDP Mode ......................................................................................49 8.4 Packets-per-Second (PPS) .........................................................................................................49 8.5 Subscriber-to-Subscriber Traffic ..................................................................................................50 8.6 Interference has a Direct Correlation to Throughput ...................................................................50 8.7 Placing the Radio Behind a Firewall ............................................................................................50 9.0 INDEX OF CONFIGURATION PARAMETERS................................................................... 51 APPENDIX A3650 MHz Band Information.............................................................................. 57 Band History ..................................................................................................................................57 Technical Details ............................................................................................................................57 U.S. Map with Exclusion Zones .....................................................................................................58 ii MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A Supported SNMP MIBs..................................................................................................................58 Accessories list ..............................................................................................................................58 APPENDIX BGlossary of Terms and Abbreviations ................................................................ 59 Copyright and Trademark This manual and all software described herein is protected by Copyright: 2011 GE MDS, LLC. All rights reserved. GE MDS, LLC reserves its right to correct any errors and omissions in this publi-

cation. Modbus is a registered trademark of Schneider Electric Corporation. All other trademarks and product names are the property of their respective owners. FCC Part 15 Notice The transceiver series complies with Part 15 of the FCC Rules for a Class A digital device. Oper-

ation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any unauthorized modification or changes to this device without the express approval of GE MDS may void the users authority to operate this device. Furthermore, the Mer-

cury Series is intended to be used only when installed in accordance with the instructions outlined in this guide. Failure to comply with these instructions may void the users authority to operate the device. Industry Canada Notice Industry Canada rules (SRSP 301.7) require that the power to the antenna on an 1800-1830 MHz installation shall not exceed 2 watts in any 1 MHz channel bandwidth. RF Exposure Notices (English and French) 1800 MHz Models Professional installation required. The radio equipment described in this guide emits radio fre-

quency energy. Although the power level is low, the concentrated energy from a directional antenna may pose a health hazard. Do not allow people to come closer than 0.4 meters (15 inches) to the antenna when the transmitter is operating in indoor or outdoor environments. More informa-

tion on RF exposure is available on the Internet at www.fcc.gov/oet/info/documents/bulletins. L'nergie concentre en provenance d'une antenne directionnelle peut prsenter un danger pour la sant. Ne pas permettre aux gens de s'approcher moins de 0.4 metres l'avant de l'antenne lorsque l'metteur est en opration. On doit augmenter la distance proportionnellement si on utilise des antennes ayant un gain plus lev. Ce guide est destin tre utilis par un installateur profes-

sionnel. Plus d'informations sur l'exposition aux rayons RF peut tre consult en ligne l'adresse suivante: www.fcc.gov/oet/info/documents/bulletins 3650 MHz Models Professional installation required. The transceiver described here emits radio frequency energy. Although the power level is low, the concentrated energy from a directional antenna may pose a health hazard. Do not allow people to come closer than 25 cm (9.8 inches) to the antenna when the transmitter is operating. This calculation is based on an 18 dBi panel antenna. Additional informa-

tion on RF exposure is available on the Internet at www.fcc.gov/oet/info/documents/bulletins. MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual iii L'nergie concentre en provenance d'une antenne directionnelle peut prsenter un danger pour la sant. Ne pas permettre aux gens de s'approcher moins de 25 cm l'avant de l'antenne lorsque l'metteur est en opration. On doit augmenter la distance proportionnellement si on utilise des antennes ayant un gain plus lev. Ce guide est destin tre utilis par un installateur profes-

sionnel. Plus d'informations sur l'exposition aux rayons RF peut tre consult en ligne l'adresse suivante: www.fcc.gov/oet/info/documents/bulletins. 5800 MHz Models Professional installation required. The radio equipment described in this guide emits radio frequency energy. Although the power level is low, the concentrated energy from a directional antenna may pose a health hazard. Do not allow people to come closer than 0.2 meters (8 inches) to the antenna when the transmitter is operating in indoor or outdoor environments. More information on RF exposure is available on the Internet at www.fcc.gov/oet/info/documents/bulletins. L'nergie concentre en provenance d'une antenne directionnelle peut prsenter un danger pour lasant. Ne pas permettre aux gens de s'approcher moins de 0.2 metres l'avant de l'antenne lorsque l'metteur est en opration. On doit augmenter la distance proportionnellement si on utilise des antennes ayant un gain plus lev. Ce guide est destin tre utilis par un installateur professionnel. Plus d'informations sur l'exposition aux rayons RF peut tre consult en ligne l'adresse suivante: www.fcc.gov/oet/info/documents/bulletins FCC Co-location Requirements: To meet FCC co-location requirements for transmitting antennas, a 20 cm (7.87 inch) separation distance is required between the units Wi-Fi and funda-

mental antennas. Ethernet and Serial Cables The use of shielded Ethernet and serial cables are required to ensure EMC compliance when oper-

ating this equipment. Manual Revision and Accuracy This manual was prepared to cover a specific version of firmware code. Accordingly, some screens and features may differ from the actual unit you are working with. While every reasonable effort has been made to ensure the accuracy of this publication, product improvements may also result in minor differences between the manual and the product shipped to you. If you have additional ques-

tions or need an exact specification for a product, please contact GE MDS using the information at the back of this guide. In addition, manual updates can often be found on our web site at www.gemds.com. iv MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A Environmental Information The manufacture of this equipment has required the extraction and use of natural resources. Improper disposal may contaminate the environment and present a health risk due to hazardous substances contained within. To avoid dissemination of these substances into our environment, and to limit the demand on natural resources, we encourage you to use the appropriate recycling sys-

tems for disposal. These systems will reuse or recycle most of the materials found in this equipment in a sound way. Please contact GE MDS or your supplier for more information on the proper dis-

posal of this equipment. Battery DisposalThis product may contain a battery. Batteries must be disposed of properly, and may not be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. Batteries are marked with a symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling return the battery to your supplier or to a designated collection point. For more information see:

www.weeerohsinfo.com Product Test Data Sheets Test Data Sheets showing the original factory test results for this unit are available upon request from the GE MDS Quality Leader. Contact the factory using the information at the back of this manual. Serial numbers must be provided for each product where a Test Data Sheet is required. MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual v vi MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A 1.0 PRODUCT DESCRIPTION The GE MDS Mercury SeriesTM transceiver is an easy-to-install WiMAX solution offering extended range, secure operation, and multi-megabit performance in a compact and rugged package. Mercury is ideally suited for applications in Smart Grid Electric Utility, Oil/Gas, Water/Wastewater, and other industrial uses in fixed location environments where reliability, security, throughput, and range are paramount. Figure 1. Mercury MIMO Series Transceiver

(Top: Base Station, Bottom: Subscriber Unit) Mercury transceivers are commonly used to convey SCADA traffic, automated metering, distribution automation, command and control traffic, text documents, graphics, e-mail, video, Voice over IP (VoIP), and a variety of other application data between field devices and WAN/LAN-based entities. Based on multi-carrier Orthogonal Frequency Division Multiplexing

(OFDM), the transceiver features high speed/low latency, Quality of Service (QoS), Ethernet and serial encapsulation, and MIMO-enhanced performance. It also provides enhanced security features including 128-bit AES encryption and EAP-TLS IEEE 802.1x Device Authentication. These features make the Mercury system the best combination of security, range, and speed of any industrial wireless solution on the market today. MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 1 1.1 Product Models The Mercury transceiver is available in several different product models:

The indoor Base Station (BS) acts as the center of each point-to-multipoint network. It has two RJ-45 Ethernet ports and a DB-9 RS-232 serial port for data connections. The indoor Subscriber Unit (SU) acts as one of the multipoints in the network. It also has two RJ-45 Ethernet ports and a DB-9 RS-232 serial port for data connections. The Outdoor Subscriber Unit (ODU) is a weatherproof ver-

sion of the standard Subscriber Unit. The ODU has one RJ-45 Ethernet port and a DB-9 serial port for data connections. The key features and options for the various models are listed in Table 1 below. Table 1. Mercury Models and Interfaces Interfaces Ethernet ports Base Station 2 RJ-45 Ethernet with built-in Layer 2 switch Indoor Subscriber 2 RJ-45 Ethernet with built-in Layer 2 switch Serial port USB WiMAX GPS Antenna 1 DB-9 RS-232 1 USB host port 1 USB device port Dual TNC for MIMO Internal receiver with SMA connector External 1 DB-9 RS-232 1 USB host port 1 USB device port Dual TNC for MIMO Optional internal receiver with SMA connector External Wi-Fi

* Expected availability: Late 2011 Optional*

1.2 Key Features The Mercury transceiver supports:

Outdoor Subscriber 1 RJ-45 Ethernet. May be ordered as Power over Ethernet or AC model 1 DB-9 RS-232 1 USB host port Internal RF connections None 15 dBi panel ant. for 1800 18 dBi panel ant. for 3650 Panel antenna for 5800 Optional*

WiMAX IEEE 802.16-2005interoperability Scalable OFDM using 512 or 1024 subcarriers 2x2 MIMO on all models supporting Matrix A and Matrix B Space Time Coding, Spatial Multiplexing, Maximum Ratio Combining, and Maximum Likelihood Detection PKMv2 security including AES-CCM 128-bit encryption, EAP-TLS, and X.509 digital certificates Hybrid ARQ up to Category 4 2 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A Adaptive modulation from QPSK with 1/2-rate FEC coding to 64-QAM with 5/6-rate coding Quality of Service (QoS) including:

Unsolicited Grant Service (UGS), Real-time polling service (RTPS), Non-real-time polling service (nRTPS) Enhanced real-time polling service (eRTPS) Best Effort (BE) 1.3 Key Specifications Table 2 lists key operational specifications for the Mercury Transceiver. Primary Wireless Local Interfaces

(indoor models) Local Interfaces

(ODU models) Frequency Bands Frequency step size Bandwidth RF Power Output Transmitter Dynamic Range Antenna Table 2. Key Specifications IEEE 802.16E-2005 WiMAX Two channel WiMAX, TNC connectors Dual 10/100 Ethernet, RJ-45, auto-sense, auto-midx DB9 Serial Port USB host and device ports GPS receiver, SMA connector (Optional on Subscriber)

(1) 10/100 Ethernet, RJ-45, auto-sense, auto-midx DB-9 Serial Port USB Host 1800 to 1830 MHz (Industry Canada) 3650 to 3675 MHz (FCC, Industry Canada) 5725 to 5825 MHz 250 kHz 3.5, 5, 7, 8.75, and 10 MHz All models 30 dBm, except 3650 ODU at 23 dBm 5800: 23 dBm 60 dB, 1 dB step size 1800 Subscriber: 15 dBi panel, dual-polarized 1800 Base Station: 12 dBi sector, dual-polarized, 120o beamwidth 3650 Subscriber: 18 dBi panel, dual-polarized 3650 Base Station: 14 dBi sector, dual-polarized, 120o beamwidth 5800 Subscriber: 18 dBi panel, dual-polarized 5800 Base Station: 16 dBi sector, dual-polarized, 90o beamwidth MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 3 Table 2. Key Specifications Indoor units: 10 to 60 VDC Outdoor units:

Power over Ethernet 10 to 60 VDC 110/220 VA 3650 Indoor Base Station: 14W Average, 21W Transmit 3650 Indoor Subscriber: 5W Average, 13W Transmit 3650 ODU: 5W Average, 8W Transmit 1800 Indoor Base Station: 16W Average, 25W Transmit 1800 Indoor Subscriber: 7W Average, 18W Transmit 1800 ODU: 7W Average, 18W Transmit 5800 BS: _W Average, _W Transmit 5800 SU: _W Average, _W Transmit 5800 ODU: _W Average, _W Transmit

-30 to +70 C 4.5 x 7.75 x 2.75 inches 11.43 x 19.69 x 6.99 cm Input Power Power consumption Operating temperature Unit Dimensions

(excluding connectors) 2.0 QUICK-START INSTRUCTIONS 2.1 Connecting to the Device Manager The Mercury transceiver provides an on-board web server, known as the Device Manager, for configuration and diagnostics. Each transceiver needs to have some basic configuration parameters set before placing the unit in service. To start the Device Manager, connect an Ethernet cable from the Mercury to the PC used for configuration. The radios Ethernet interfaces have auto-sense detection allowing a straight-through or crossover cable to be used. NOTE: The PC used for radio management must be in the radios default IP Subnet for communications to take place. It can be changed once the desired IP address is chosen. To manage the radio, start a web browser and enter the units IP address. The transceiver defaults to an IP address 192.168.1.1 and netmask 255.255.255.0. The Mercury will prompt for a username and password. The default entries for both of these fields are admin. NOTE: In case of a lost password and an inability to login, see the Troubleshooting section for details on resetting the password and the unit's configuration. Once connected to the Device Manager, the summary page shown in Figure 2 is displayed. 4 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A Invisible place holder Figure 2. Mercury Summary Page Example

(Shows connection after IP address has been changed) 2.2 Configure IP Address and Identity The IP Address of the unit is configured on the Configuration - IP &

Networking page. The IP address and netmask should be set according to the network configuration defined by the system administrator. Note that if the IP address is changed, the web browser session will need to be re-started with the new configuration. MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 5 Invisible place holder Figure 3. Mercury Configuration Screen In addition to the IP address, the unit can be configured with an optional Device Name for ease of administration. The name can be set on the Configuration - Identity & Time page. Invisible place holder Figure 4. Mercury Configuration Identity & Time 6 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A 2.3 Basic Connectivity To establish basic connectivity between a Base Station and a Subscriber, start the configuration with the Base Station. The IP address and Device Name will be as set from the factory (or by the previous user). The Configuration - Radio page contains the key parameters for configuring the WiMAX interface. Invisible place holder Figure 5. Mercury ConfigurationRadio The frequency defaults to 3662.5 MHz and the bandwidth is set to 3.5 MHz. These default values are sufficient to perform benchtop testing prior to final installation. Set the frequency and bandwidth to the same values on the Base Station and Subscriber. If performing the test on a table, cable the units as shown in Figure 6. The attenuator cables should be connected to the radios TX/RX connectors. NOTE: The frequency default for the 1800 model is 1815 MHz. For the 5800 model it is 5800 MHz. MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 7 Invisible place holder Figure 6. Benchtop Test Setup Use the Maintenance & Status - Performance page on the Subscriber to monitor the establishment of the link. Invisible place holder Figure 7. Maintenance and Status Screen The Wireless Network Status will display a Connection Status of OPERATIONAL when the Subscriber is successfully linked to the Base Station. The WiMAX Radio Status pane displays the signal strength and quality. For a cabled, benchtop test, an RSSI of -70 dBm is acceptable. For a -70dBm signal, a signal-to-noise ratio (SNR) of 28 dB or greater is expected. 8 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A Setup for Maximum Throughput To demonstrate maximum throughput, several configuration changes must be made. In addition, the link needs to be cabled according to Figure 6, with a strong signal, that is, above -70dBm. If necessary, the link attenuation should be adjusted to reach the desired RSSI level. The transmit power of the Base Station should be reduced to 10 dBm to ensure that the Subscriber only receives the signal through the cables and not directly from enclosure to enclosure. With this strong signal the modulation rate downlink and uplink should be 64QAM FEC 5/6. There may need to be data flow, such as an ICMP ping, in order to have the modems shift up to this modulation rate. Both the Base Station and Subscriber need to be set for MIMO Type Matrix A/B. The Base Station should have HARQ (4) enabled and ARQ disabled. These changes are made using the Configuration - Radio page. This setup and configuration can be used with any RF bandwidth. Approximate aggregate throughput for each bandwidth is given below. Table 3. Throughput Ratings (Nominal) Bandwidth 3.5 MHz 5 MHz 7 MHz 8.75 MHz 10 MHz Aggregate Throughput 7 Mbps 10 Mbps 15 Mbps 16 Mbps 17 Mbps 3.0 FEATURE DESCRIPTIONS 3.1 Security Features Overview The Mercury transceiver employs many security features to keep the device, network, and data secure. Some of these features include WiMAX PKMv2, EAP-TLS, and AES-CCM encryption on the WiMAX interface and HTTPS, SNMPv3, and RADIUS authentication for the configuration interfaces. Authentication Authentication is the process by which one network entity verifies that another entity is who or what it claims to be and has the right to join the network and use its services. Authentication in wireless SCADA networks has two primary forms: User Authentication and Device MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 9 Authentication. User authentication allows a device to ensure that a user may access the device's configuration and services. Device authentication allows a network server to verify that a device may access the network. User Authentication The Mercury transceiver requires user login with an account and password in order to access the Device Manager. This process can be managed locally in which the device stores the user account information in its on-board non-volatile memory, or remotely in which a RADIUS server is used. The transceiver has two local accounts: operator and admin. The operator account has read-only access to configuration parameters and performance data. The admin user has read-write access to all parameters and data. NOTE: The Operator account does not have access through the web interface. An Operator account may be used with the console, Telnet, or SSH. To centralize the management of user accounts, a RADIUS server may be used. Each Mercury transceiver must be configured with the IP address, port, shared secret, and authentication protocol of a RADIUS server. When a user attempts to login, the credentials will be forwarded to the RADIUS server for validation. PKMv2 Device Authentication The IEEE 802.16-2005 WiMAX standard uses PKMv2 for securing the wireless channel. PKMv2 stands for Privacy Key Management version 2. The Privacy Key Management protocol is used to exchange keying material from the Base Station to the Subscriber. This keying material is used to encrypt data so that it is secure during transport over the air. The encryption keys are routinely rotated to ensure security. Initial keying material is obtained during the device authentication process. This occurs when a Subscriber attempts to join a Base Station. The Base Station initiates an EAP-TLS negotiation with the Subscriber to begin the device authentication process. The Subscriber is only allowed to transmit EAP messages until the authentication has finished successfully. The Base Station forwards messages to the RADIUS server where the decision to allow the Subscriber to join is made. If the Subscriber authenticates successfully and the RADIUS server allows the Subscriber to join the network, then the data encryption keying material is sent to the Base Station. The Base Station then continues the PKM protocol to further derive keying material that is used to secure transmissions between the Base Station and the Subscriber. 10 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A The Subscriber must be configured with X.509 certificates that are appropriate for the Public Key Infrastructure (PKI) in which they are deployed. These certificates are used to identify and authenticate the Subscriber to the RADIUS sever. X.509 Certificates A digital certificate, often known as an X.509 certificate, is a file that contains identification data and asymmetric key material. Each certificate contains a Common Name that identifies the user or device that owns the certificate. The primary information in the certificate is the public key for the user or device and a digital signature proving the authenticity of the certificate's contents. The Mercury transceiver uses X.509 certificates in the EAP-TLS handshake during device authentication as described in the PKMv2 section above. 3.2 Multiple In / Multiple Out (MIMO) Operation MIMO stands for Multiple In / Multiple Out. The Mercury transceiver features 2x2 MIMO on all models. This means that there are two full transmit and receive channels on each device. The use of 2x2 MIMO causes the Mercury transceiver to have higher throughput and greater range and coverage than single channel devices in the same environment. There are two operating modes that the Mercury supports. The first mode is Matrix A in which the Mercury uses Space-Time Coding (STC) on the transmitter to allow it to send the same data on each channel but coded differently in order to get transmit diversity. On the receive side, the Mercury transceiver uses Maximum Ratio Combining (MRC) to more accurately reconstruct the received signal by using both receive channels. The second mode is Matrix B in which the Mercury uses Spatial Multiplexing (SM) to send different data flows on each channel allowing it to effectively double the amount of data transmitted. The Mercury offers a Matrix A/B setting in which the transceivers determine in real time which mode, Matrix A or Matrix B, to use according to the channel conditions. This determination is made based on the SNR and Packet Error Rate (PER). GE MDS sells antennas that are dual-polarized for MIMO applications. This includes sector antennas for Base Stations and panel antennas for Subscribers. Each antenna has two feed lines, one for the vertically polarized element, and one for the horizontally polarized element. MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 11 3.3 ARQ and Hybrid ARQ Automatic Retransmission Request (ARQ) enables retransmission of erroneous or lost data packets. Hybrid ARQ (HARQ) combines forward error correction with ARQ retransmissions to improve performance at lower RF signal levels. With ARQ, the receiver discards erroneous packets and requests retransmission. With HARQ, erroneous packets are saved by the receiver and combined with the retransmitted data. Generally, HARQ provides better throughput than ARQ. While ARQ and HARQ can be enabled at the same time, it is not recommended to do so because throughput will be less than if either ARQ or HARQ was enabled on its own. ARQ and HARQ can be enabled or disabled in the ARQ/HARQ Settings table of the Configuration-Radio page on the Base Station. ARQ Setup ARQ utilizes a sliding window approach where a window of blocks can be transmitted without receiving acknowledgement from the receiver. ARQ blocks that are unacknowledged will be resent. You can specify the block and window size at the Base Station, as well as Block Lifetime, Transmitter Delay, and Receiver Delay. ARQ Block Size - The size, in bytes, of the block of data to be considered for retransmission. ARQ Window Size - The number of blocks of ARQ data that can be transmitted without receiving an acknowledgment. ARQ Block Lifetime - The maximum period, in milliseconds, that the ARQ block is considered still valid and can be retrans-

mitted. ARQ Transmitter Delay - The amount of delay time, in millisec-

onds, at the transmitter. ARQ Receiver Delay - The amount of delay time, in millisec-

onds, at the receiver. The Receiver Delay taken together with the Transmitter Delay determines the total ARQ retry timeout. Use the Configuration - Radio page to set ARQ parameters on the Base Station. ARQ/HARQ settings are located at the bottom of the page. 12 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A Invisible place holder Figure 8. ConfigurationRadio

(ARQ/HARQ Settings) HARQ Setup A HARQ Category may be set on the Subscriber. Higher category numbers provide a higher number of HARQ channels and more bursts per frame. Therefore, the greatest throughput will be obtained at HARQ category 4. For more information on HARQ categories, refer to the WiMAX Forum Protocol Implementation Conformance Statement

(PICS), or the IEEE-802.16 Standard, OFDMA Parameters. Use the Configuration - Radio page on the Subscriber to set the HARQ Category value. This value is located at the bottom of the page. MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 13 Invisible place holder Figure 9. ConfigurationRadio

(HARQ Category Setting) 4.0 Performing Common Tasks 4.1 Basic Device Management There are several ways to configure and monitor the Mercury transceiver. The most common method is to use a web browser to connect to the device's HTTP server. This can be done by opening a web browser and entering the Mercury's IP address. Another way to connect, especially if the IP address is unknown, is to use the USB interface. Simply connect a standard-A/mini-B USB cable between the Mercury transceiver and the PC or laptop. A Windows device driver needs to be installed if the USB console port is to be used. This driver is available from GE MDS. USB Console To connect a PC or laptop to the transceiver's USB port, a serial device driver needs to be installed on the PC or laptop. This can be done by downloading the gserial.zip file from the GE MDS website and extracting the contents to a temporary folder. Next, right-click on the gserial.inf file and click Install. Once this is completed, the PC is ready to be connected to the Mercury transceiver's USB device (gadget) port. Upon reboot or power-cycle of the transceiver, wait at least 60 seconds before connecting it to the PC. Connect the USB Mini-B port on the transceiver to a USB port on the PC (the USB type A connector on the Mercury will not work). Next, on the PC, run the following:

Installing the Gadget Serial Driver:

Connecting the device to a Windows PC:

14 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A Start>>Control Panel>>System>>Hardware>>Device Manager Next, expand the group labeled Ports (COM & LPT). A new COM port will appear as Gadget Serial when the device is connected. Open a new session for the newly added COM port using a terminal program such as PuTTY, HyperTerminal, ProComm, etc. Note that the baud rate will be ignored as this is not an actual serial port. Using Configuration Scripts Configuration scripts can be used to save, restore, and copy configurations from unit to unit. The script is a text file containing a simple list of parameter names and values. A snippet of a configuration file follows:

IP Address: 192.168.1.1 ; IP address of the unit IP Netmask: 255.255.0.0 ; IP netmask of the unit RF bandwidth: 3.5 ; WiMAX RF bandwidth Frequency: 3662.5 ; WiMAX operating frequency To get started with configuration files, it is easiest to have a unit generate a file. The generated file can then be saved, modified, and/or downloaded to another unit in identical fashion. The transceivers Maintenance & Status - Configuration Files page can be used to generate the file. The file can be transferred to and from the unit via TFTP, FTP, SFTP, or USB flash drive. Choose the appropriate value for the File Media parameter. If using TFTP, FTP, or SFTP, configure the Host Address parameter with the IP address of the host server. NOTE: A USB flash drive, if used, must be formatted for use by Microsoft Windows (FAT32 format). MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 15 Invisible place holder Instructions for loading firmware using FTP Figure 10. Maintenance & StatusConfiguration Files Perform Firmware Upgrade New firmware is periodically released by GE MDS to deliver new features and performance enhancements. The latest firmware can be downloaded from the GE MDS website at www.gemds.com. There are several ways to load new firmware on the Mercury transceiver. The firmware file can be transferred using FTP, SFTP, TFTP, or a USB flash drive. The selection between FTP, SFTP, or TFTP must be made according to the user's network and security environment. The process of loading firmware is essentially the same regardless of network protocol chosen. 1. Download the .mpk firmware file from GE MDS. 2. Place the .mpk firmware file on a server that has an FTP server run-

ning. Ensure that the file is placed in a folder accessible to the FTP server. 3. Follow the instructions for configuring IP network access for the Mercury transceiver (see Basic Connectivity on Page 7). 4. Navigate to the Maintenance & Status - Firmware Utilities page on the transceiver Device Manager. 5. Set the Host Address to the IP address of the server on the network. Set the Firmware Filename to the folder and filename as it appears to the FTP server. 16 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A Instructions for loading firmware using a USB flash drive 6. If the FTP server does not support an anonymous user, enter the username and password for an account on the FTP server. 7. Press the Program button and wait for the file transfer to complete. 1. Download the .mpk firmware file from GE MDS 2. Place the .mpk firmware file on USB flash drive that is formatted for use by Microsoft Windows (FAT32 format). 3. Navigate to the Maintenance & Status - Firmware Utilities page on the Mercury transceiver. 4. Set the Firmware Filename to the folder and filename as it appears on the USB flash drive. 5. Press the Program button and wait for the file transfer to complete. Instructions for Completing the Firmware Upgrade Process

(Applies to all loading methods above) Once the file transfer is complete, select the new image under the Device Reboot pane (see Figure 11) and press the Reboot button. The transceiver verifies the integrity of the new firmware image and then reboots to it. MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 17 Invisible place holder Figure 11. Maintenance & StatusFirmware Utilities Screen Configuring Networking Features for VLAN The Mercury supports IEEE 802.1Q, or VLAN tagging. VLANs, or Virtual LANs, are used to create multiple logical networks that share an existing physical network. There are a number of parameters available for configuring how the transceivers behave when VLAN is enabled and they are explained below. When VLAN is enabled, a Mercury transceiver will have two IP addresses: one for the Management VLAN and one for the Serial VLAN. The Management VLAN IP address allows administrators to manage the transceiver using the usual networked interfaces, such as Web, telnet, and SNMP. Those services are only available through the Management VLAN IP address while VLAN is enabled. The Management VLAN IP Address settings are configured under the MGMT VLAN Subnet Config Menu or the IP Address section on the web page. 18 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A The Serial VLAN IP address allows SCADA networks to connect to the Serial Terminal Server on the transceiver. The terminal server provides access to the transceiver's local COM port so IP networks can utilize serial devices. The terminal server is only available through the Serial VLAN IP address while VLAN is enabled. The Serial VLAN IP Address settings are configured under the Serial VLAN Subnet Config Menu or the Serial VLAN IP Address section on the web page. When configuring VLAN, Ids must be assigned to the Management VLAN, Serial VLAN, LAN 1 Port and LAN 2 Port. The Management VLAN Id and Serial VLAN Id cannot be the same value. The VLAN Ethport Mode parameter determines how IP frames are handled with respect to VLAN tagging. When the mode is set to Access, a VLAN tag is added to IP frames that are received on that Ethernet port. In the case of the LAN 1 port, the LAN 1 VLAN ID would be added to the frame prior to forwarding the frame over-the-air. Likewise, the tag is removed from the IP frame for traffic that is going to be transmitted out of the Ethernet port. This is the mode that is most likely to be used on Subscribers where the LAN connected to the subscriber is non-VLAN and it would be tagged before it reaches the Base Station. When the VLAN Ethport Mode is set to Trunk, IP frames received from the Ethernet port are not automatically tagged. It is assumed that the LAN that is connected to the Ethport is already tagged with VLAN Ids. This mode is most likely to be used on Base Stations where the network connected to the Base Station Ethports are VLAN aware. The last mode for VLAN Ethport Mode is Auto, where the Subscriber or Base Station can automatically determine whether or not to tag frames based on the traffic it receives. Management VLAN Mode determines whether or not VLAN tags will be applied to Management frames. When the mode is set to Tagged Mode, management frame s are expected to already have the management VLAN Id attached to them. If management frames arrive at the trunk port without a VLAN Id and the mode is Tagged Mode, then those frames will be ignored. In Native Mode, management frames do not need the VLAN tag. The frames will automatically be included in the Native VLAN, which is the management VLAN. The Default Route IF parameter determines which VLAN will be used to route traffic that does not yet have an entry in the ARP table. This parameter should be set to the VLAN that typically has the most routing to be performed since this should help route traffic quickly through that VLAN. MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 19 The following is an example configuration that has a VLAN enabled network connected to the Base Station and a non-VLAN enabled network connected to the Subscriber. This configuration would allow VLAN enabled devices in the Base Station network to communicate with non-VLAN devices in the Subscriber network. The Base Station is configured as follows:

Figure 12. Base Station Configuration Settings The Subscriber Unit is configured as follows:

20 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A Invisible place holder Overview Figure 13. Subscriber Unit Configuration Settings Configure Serial Data Interface for TCP, UDP, MODBUS The transceiver includes an embedded serial device server that provides transparent encapsulation of serial data in IP packets. In this capacity, it acts as a gateway between serial and network-based devices. Two common scenarios are PC applications using IP to communicate with remote devices, and serial PC applications communicating with remote serial device over an IP network. Note that the transceiver's serial port is configured as Data Communications Equipment (DCE). A null-modem cable is required if the serial device to be connected is also DCE. MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 21 Dual Purpose Capability TCP and UDP Encapsulation Serial Encapsulation The transceiver's COM1 serial port is able to function as a local console or in data encapsulation mode. When the Com 1 Status parameter is set to Enabled, the port operates in data encapsulation mode. It can be reverted back to console mode by entering the escape sequence +++ at the data mode baud rate. The serial data can be encapsulated in either TCP or UDP packets. TCP provides a connection-oriented link with end-to-end acknowledgement of data, but with some added overhead. UDP provides a connection-less best-effort delivery service with no acknowledgement. Most polled protocols will be best served by UDP service since many of these protocols have built-in error recovery mechanisms. UDP can provide the needed multi-drop operation by means of multicast addressing. On the other hand, TCP services are best suited for applications that do not have a recovery mechanism or error-correction but need the guaranteed delivery that TCP provides while affording the extra overhead required. Transparent encapsulation, or IP tunneling, provides a mechanism to encapsulate serial data into an IP envelope. In operation, all of the bytes received through the serial port are put into the data portion of a TCP or UDP packet. In the same manner, all data bytes received in a TCP or UDP packet are output through the serial port. When data is received by the radio through the serial port, it is buffered until the packet is received completely. There are two events that signal an end-of-packet to the transceiver: a period of time since the last byte was received, or a number of bytes that exceed the buffer size. Both of these triggers are user-configurable. One transceiver can be used for IP-to-serial encapsulation in which it communicates with another IP-based device. On the other hand, two transceivers can be used to create a serial-to-serial channel using TCP or UDP between them. TCP Client and Server modes A TCP session has a server side and a client side. You can configure the transceiver to act as a server, a client, or both. TCP servers listen and wait for requests from TCP clients to establish a session. A TCP client is an application running on a device somewhere on the network. TCP clients actively attempt to establish a connection with a TCP server. In the case of the transceiver, this happens whenever data is received on the serial port. The transceiver can also operate in Client/Server mode in which it operates in either client or server mode, depending on which event occurs first; either receiving data on the serial port, or receiving a request to open a TCP connection from a remote client. 22 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A The transceiver keeps a TCP session open until internal timers that monitor traffic expire. Once a TCP session is closed, it must be opened again before traffic can flow. The timeout period, labeled TCP Keepalive, is user-configurable and should be set to match the application data flow and balance a trade-off between responsiveness and connection overhead. TCP connection establishment can introduce a slight delay to data delivery, as it performs handshaking between the client and server. On the other hand, leaving a session open can waste bandwidth due to session management packets. IP addressing provides a way to do a limited broadcast to a specific group of devices. This is known as multicast addressing. Many IP routers and switches support this functionality. Multicast addressing requires the use of a specific set of IP addresses set apart by the Internet Assigned Numbers Authority (IANA). UDP multicast is generally used to transport polling protocols used in SCADA applications where multiple remote devices will receive and process the same poll message. As part of the multicast implementation, the radio sends IGMP membership reports, IGMP queries, and responds to membership queries. It defaults to V2 membership reports, but responds to both V1 and V2 queries. The Multicast Mode parameter on the transceiver must be set appropriately in order for the transceiver to receive multicast traffic. Setting the Multicast Mode parameter causes the transceiver to join the multicast group. The Buffer Size and Inter-packet Delay parameters are user-configurable. They work together to determine how many bytes are captured in a single packet. When a number of bytes equal to the Buffer Size are received from the serial port, those bytes are encapsulated and sent as a TCP or UDP packet. If a delay equal to the Inter-packet Delay is experienced after some number of bytes, then the bytes received up to the delay are encapsulated and sent as a TCP or UDP packet. The Serial Wizard handles configuration of the serial port. To access the Serial Wizard, navigate to the Setup Wizards link on the left sidebar. The Setup Wizard - Serial Configuration page appears. UDP Multicast Data Buffering Setup Wizard MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 23 Invisible place holder Figure 14. Setup WizardsSerial Configuration To begin the Serial Wizard, click the Begin Wizard link under the Serial Wizard table. The wizard prompts for the protocol to configure. The options are TCP, UDP, or TCP/MODBUS. Example: TCP Server The following procedure describes how to setup a TCP Server. 1. Select TCP as the IP protocol. 2. Select the desired TCP mode - client or server or client/server. 3. Next, specify the local port to use for receiving TCP data from the host. Click Continue Wizard to continue. 4. Specify the buffer size and inter-packet delay, then click Continue Wizard. 5. Choose whether to enable or disable COM1 for communication. If Enable is selected, COM1 operates as a TCP Server as soon as the Serial Wizard is complete. If Disable is selected, the settings are saved upon completion of the Serial Wizard, and COM1 may be enabled for data transfer at a later time in the Serial Configuration main page. Click Continue Wizard to continue. 24 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A 6. The current settings are shown. Click Commit Changes to apply all settings and exit the Serial Wizard. Invisible place holder Figure 15. Serial Wizard's Commit Changes Screen Configure QOS Quality of service is configured on the Base Station through the use of service flows. The service flows can be created through the web interface and through the use of QoS configuration scripts. The web interface displays the active service flows as well the user-configured flows. Depending on the desired effect, the service flows are created with different service types and parameters. For example, service flows can be created to give priority to a particular traffic flow, to allocate a specific amount of bandwidth for a traffic flow, to restrict the amount of bandwidth, or to minimize the latency experienced by a traffic flow. MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 25 Service Types Service Type Unsolicited Grant Service (UGS) Real-time Polling Service (RTPS) Non-real time polling Service

(nRTPS) Enhanced Real-time Polling Service (eRTPS) Best Effort (BE) WiMAX provides five types of service: Unsolicited Grant Service

(UGS), Real-time Polling Service (RTPS), Non-real time polling Service (nRTPS), Enhanced Real-time Polling Service (eRTPS), and Best Effort (BE). The characteristics and typical uses for service type are given in Table 4 below. Table 4. Service Types and Characteristics Characteristics Typical Uses The BS grants bandwidth to the SU without it needing to make a request. The bandwidth is always allocated. The BS provides specific bandwidth request opportunities for the SU. This is more efficient than UGS in not wasting bandwidth but is less efficient in request/grant of bandwidth. The BS polls the SU every one second or less. The SU may use the polling requests or contention requests. This is an efficient request mechanism but does not provide consistent bandwidth for data. Combination of UGS and RTPS in which the BS provides bandwidth grants as in UGS but the Subscriber can adjust the size of the grants in order to not waste bandwidth. The Subscriber uses contention request opportunities to request bandwidth for data. Bandwidth is provided on a best effort basis with no acknowledgement. Real time applications generating fixed-size packets on a periodic basis and requiring low latency and jitter, such as VoIP. Real time applications generating variable-size packets on a periodic basis, such as MPEG video. Delay-tolerant applications generating variable-size packets on a periodic basis, such as an FTP transfer. Real time applications generating variable-size packets on a periodic basis, such as VoIP with silence suppression. Non-real time, non-critical applications and data flows such as web browsing. Flow Parameters There are several parameters to be specified when creating a service flow. Table 5 shows which service flow parameters apply to each type of service. Table 5. Flow Parameters Parameter Min Reserved Rate Max Sustained Rate Priority Max Latency Grant Interval Polling Interval UGS

(Y) Y N Y Y N RTPS nRTPS eRTPS Y Y Y Y N Y Y Y Y N N Y Y Y Y Y N BE N N N N N N 26 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A Table 6 provides a description for each of the above parameters. Table 6. Parameter Descriptions Parameter Min Reserved Rate Max Sustained Rate Priority Max Latency Grant Interval Polling Interval Description The minimum rate in bits per second that must be reserved for the service flow. For UGS, the Min Reserved Rate is set to the same value as the Max Sustained Rate. The maximum rate in bits per second that the service flow will increase to. It is used as an upper bound for the flow. A value used to describe the priority between service flows that have the same characteristics and settings. The maximum time between the reception of the packet from the wire and its delivery to the other end of the link. The time period between successive grants by the Base Station for a UGS or eRTPS service flow. The time period between successive polls by the Base Station for a RTPS or nRTPS service flow. Quality of Service (QoS) Screen The transceiver's Configuration - QoS page displays the active service flows as well the user-configured flows. Figure 16. Configuration-QoS Screen MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 27 Creating a Service Flow The Add New Service Flow button allows for a new service flow to be created and configured. Pressing this button displays the following dialog box. Invisible place holder Figure 17. Configuration QoS Screen QOS Example: Low Latency To create a service flow providing consistent low latency, the UGS service type should be used. The grant interval should be set to match the desired latency. For example, if the data source produces a packet once every 20 milliseconds, then the grant interval should be 20 milliseconds (msec). QOS Example: Controlling Bandwidth in Video Applications To create a service flow that manages the bandwidth requirements of a video stream, the Real-time Polling Service should be used. The bandwidth-hungry nature of video needs to be balanced against the limited bandwidth of the wireless channel. Often, a video stream does not need to be of high quality in order to be useful. The Real-time Polling Service allows for a minimum and maximum bandwidth to be specified in order to bound the video stream. 28 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A QOS Example: Prioritizing a Data Flow In order to prioritize one traffic flow over another, the service flow priority should be used. In this example, there are two VLANs on the trunk at the Base Station. Suppose the user wants to treat traffic on VLAN 5 as higher priority than traffic on VLAN 6 in the event of heavy network traffic or congestion. To accomplish this, uplink and downlink service flows are created that classify on VLAN ID, assigning a higher priority to VLAN 5's service flows. The following dialog box shows the configuration for the VLAN 5 uplink service flow. A second service flow should be created identical to this one for the downlink. 1. Use a MAC address of FF:FF:FF:FF:FF:FF to ensure that the service flow can be used by any subscriber. (If using all Fs, a maximum of 13 entries is allowed.) 2. Set a low minimum rate to increase the chances that both service flows will be allocated bandwidth in the event of network conges-

tion. 3. Set Filter 1 to the appropriate VLAN ID to restrict each service flow to the desired VLAN. 4. Set the priority of VLAN 5's service flows to a higher priority than VLAN 6's service flows. 5. A service flow is needed for uplink and downlink traffic for each VLAN. Invisible place holder Figure 18. Edit Service Flow Screen (VLAN 5) MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 29 The dialog box in Figure 19 below shows the uplink service flow for VLAN 6. Figure 19. Edit Service Flow Screen (VLAN 6) Once configured, the list of provisioned service flows appears similar to that shown in Figure 20 below. Figure 20. Manage Provisioned Service Flows 30 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A 4.2 CONFIGURE SECURITY FEATURES &

INTEGRATION WITH A RADIUS SERVER Device Management Interface Configuration Using the Configuration - Security page, each of the device management interfaces (HTTP, SNMP, SSH, telnet) can be enabled or disabled. For secure installations, it is recommended that 1) the Telnet interface be disabled, 2) the SNMP agent run in SNMPv3 mode, 3) the web server be configured for HTTPS with MD5 digest. User Accounts Each Mercury transceiver has a set of local user accounts available via console terminal management. The local accounts are as listed in the chart below:

Username operator Default Password operator admin admin Access level Read-only access to configuration parameters and status and performance metrics and statistics. (Applies only to Console Terminal Management.) Read and write access to all configuration parameters and read access to status and performance metrics and statistics NOTE: In case of a lost password and an inability to login to the trans-

ceiver, see TROUBLESHOOTING on Page 36 for details on resetting the password. In addition to the local user accounts, the Mercury transceiver can be configured to use a RADIUS server for centralized user account management. The Configuration - Security page is used to configure the User Auth Method to RADIUS. If the User Auth Fallback parameter is set to Local, then the local user account information will be used if the RADIUS server (and secondary server if configured) is unreachable. MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 31 4.3 RADIUS Server Configuration Using the Configuration - Security page, each Mercury transceiver can be configured with one or two IP addresses for RADIUS servers. The RADIUS server is used for user authentication and device authentication. The IP address, port, shared secret, and authentication protocol can be configured for each RADIUS server. If two servers are configured, the device will use the first server for authentication processes. However, if ICMP communication fails to the first server, the Mercury transceiver will change over to the second server. 32 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A Creation of X.509 Certificates Each transceiver can be loaded with a set of X.509 digital certificates in DER format. These certificates are used in the authentication process when joining a WiMAX network. The certificates can be loaded using TFTP, FTP, or SFTP, as described below. Three certificates are supported: Root CA (Certificate Authority), the Device's public certificate, the Device's Private Key. The Common Name (CN) for the certificate must be the serial number for the Mercury transceiver. A domain name can be appended to the serial number for the Common Name, for example, 2047711.mydomain.com. Load X.509 Certificates The X.509 certificates can be loaded on the unit using TFTP, FTP, SFTP, or a USB flash drive using the Configuration - Security page. Select the appropriate File Media as TFTP, FTP, SFTP, or USB. If using one of the network protocols, specify the IP address of the server and the other necessary protocol parameters. Specify the filename of the certificate as it appears on the server or USB flash drive used. Specify the certificate type: Root CA, Public certificate, or Private Key. Once these parameters are set, begin the transfer by pressing the Retrieve Certificate button. Repeat this process for each of the three certificates. Invisible place holder Figure 21. Configuration - Security Screen MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 33 Overview SNMPV3 SUPPORT Configure SNMPV3 The Mercury transceiver supports SNMP protocol version 3. Version 3 brings a higher level of security to SNMP transactions by requiring user account name and password authentication as well as encryption of SNMP packets. The following section describes how SNMPv3 is implemented on the transceiver and how to configure it for integration with PulseNET and other network management system software. The updated SNMP Agent now supports SNMP version 3 (SNMPv3). The SNMPv3 protocol introduces Authentication (MD5/SHA-1), Encryption (DES), the USM User Table, and View-Based Access (refer to RFC2574 for full details). The SNMP Agent has limited SNMPv3 support in the following areas:

Only MD5 Authentication is supported (no SHA-1). SNMPv3 provides support for MD5 and SHA-1. Limited USM User Table Manipulation. The SNMP Agent starts with five default accounts. New accounts can be added

(SNMPv3 adds new accounts by cloning existing ones), but they will be volatile (will not survive a power-cycle). New views cannot be configured on the SNMP Agent. Views are inherited for new accounts from the account that was cloned. The SNMP Agent uses one password pair (Authentication/Pri-

vacy) for all accounts. This means that when the passwords change for one user, they change for all users. SNMPV3 Accounts The following default accounts are available for the SNMP Agent:

enc_mdsadmin-Read/write account using Authentication and Encryption. auth_mdsadmin-Read/write account using Authentication. enc_mdsviewer-Read only account using Authentication and Encryption. auth_mdsviewer-Read only account using Authentication. def_mdsviewer-Read only account with no Authentication or Encryption. Context Names The following Context Names are used (refer to RFC2574 for full details):

Admin accounts is context_a Viewer accounts is context_v. All accounts share the same default passwords:

Authentication default password is MDSAuthPwd Privacy default password is MDSPrivPwd 34 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A Passwords can be changed either locally (via the console) or from an SNMP Manager, depending on how the Agent is configured. If passwords are configured and managed locally, they are non-volatile and will survive a power-cycle. If passwords are configured from an SNMP manager, they will be reset to whatever has been stored for local management on power-cycle. This behavior was chosen based on RFC specifications. The SNMP Manager and Agent do not exchange passwords, but actually exchange keys based on passwords. If the Manager changes the Agent's password, the Agent does not know the new password. The Agent only knows the new key. In this case, only the Manager knows the new password. This could cause problems if the Manager loses the password. If that occurs, the Agent becomes unmanageable. Resetting the Agent's passwords

(and therefore keys) to what is stored in flash memory upon power-cycle prevents the serious problem of losing the Agent's passwords. If passwords are managed locally, they can be changed on the Agent (via the console). Any attempts to change the passwords for the Agent via an SNMP Manager will fail when the Agent is in this mode. Locally defined passwords will survive a power-cycle. In either case, the SNMP Manager needs to know the initial passwords being used in order to communicate to the Agent. If the Agent's passwords are configured via the Manager, they can be changed from the Manager. If the passwords are managed locally, then the Manager must be re-configured with any password changes in order to continue talking to the Agent. Password Mode Management Changes When the password management mode is changed, the active passwords used by the Agent may also change. Some common scenarios are discussed below:

Passwords are currently being handled by the Manager. The assigned passwords are Microwave (Auth), and Rochester (Priv). Configuration is changed to manage the passwords locally. The passwords stored on the radio were Fairport (Auth), and Church-

ville (Priv) (if local passwords have never been used, then MDS-

AuthPwd and MDSPrivPwd are used). These passwords will now be used by the Agent to re-generate keys. The Manager must know these passwords to communicate with the Agent. Passwords are currently managed locally. The local passwords are Fairport (Auth) and Churchville (Priv). Configuration is changed to handle the passwords from the Manager. The same passwords will continue to be used, but now the Manager can change them. Passwords are currently managed locally. The local passwords are Fairport (Auth) and Churchville (Priv). Passwords are changed to Brighton (Auth) and Perinton (Priv). The Agent will immedi-

ately generate new keys based on these passwords and start using them. The Manager will have to be re-configured to use these new passwords. MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 35 Passwords are currently managed locally. The local passwords are Fairport (Auth) and Churchville (Priv). Configuration is changed to handle the passwords from the Manager. The Man-

ager changes the passwords to Brighton (Auth) and Perinton

(Priv). The radio is then rebooted. After a power-cycle, the radio uses the passwords stored in flash memory, which are Fairport

(Auth) and Churchville (Priv). The Manager must be re-config-

ured to use these new passwords. 4.4 Use of the Antenna Alignment Tool The antenna alignment tool* is intended for use with the ODU Subscriber. The tool provides status and performance indicators and is intended for use during ODU installation and troubleshooting. The tool features indicators for Power, Device status (Operational or Alarmed), Link status, RSSI, and SNR. It is powered by the ODU over the USB connection. To get started, mount the ODU in the desired location and tighten the mounting bracket so that it is snug but can still be moved by hand. Plug the alignment tool into the ODU using the USB cable provided. All of the LED indicators on the tool will light briefly while the tool powers up. Check the Power, Device status, and Link status indicators to verify that they are lit. If the Device status indicators show that the ODU is Initializing, then wait up to 1.5 minutes for the ODU to become fully Operational. If the Link status indicator does not light, then wait for 30 seconds to give the unit time to scan for a Base Station. If the Link indicator still does not light, then the ODU may be significantly misaligned, there may be a problem with the Base Station, or there may be an incorrect configuration on the Base Station or ODU Subscriber.

*Expected availability: Late 2011 5.0 TROUBLESHOOTING 5.1 LED INDICATORS Meaning Primary power present Unit is alarmed Unit is intitializing No primary power LAN detected Ethernet traffic No LAN connected Data traffic No data traffic Activity ON Blinking Fast Blinking Slow OFF ON Blinking OFF Blinking OFF Indicator PWR LAN COM1 36 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A GPS LINK (Base Station) LINK (Subscriber) USB ON Blinking OFF ON OFF ON Blinking slow OFF ON OFF Internal GPS receiver is synchronized to satellite network Base station is synchronizing internal clock to satellite timing Internal GPS receiver is not synchronized The Base Station is operational and transmitting The Base Station is not transmitting The Subscriber is linked to a Base Station The Subscriber is scanning The Subscriber is not linked to a Base Station USB activity on Host port No USB activity NOTE: When the Subscriber boots up, the PWR LED will be on solid at first, then begin blinking sl owly while the unit initialize s. Once initialized, the LINK LED will blink slowly while the unit scans for a Base Station. Once the unit links, the LINK LED stays on solid. 5.2 WiMAX Statistics The Maintenance and Status - Performance screen on both the Base Station and Subscriber provides WiMAX Statistics. This information can be used for diagnostics and troubleshooting of the wireless link. The WiMAX Statistics pane provides packet and byte statistics for both the uplink and downlink direction. Note that the term Downlink refers to the wireless path from the Base Station to the Subscriber and the term Uplink refers to the Subscriber to Base Station path. In addition to the packet and byte statistics, each unit provides packets-per-second and kilobits-per-second metrics in real time. The Clear WiMAX Statistics button can be clicked to reset the packet and byte counters and the rate indicators. 5.3 Common Troubleshooting Scenarios Unit does not boot Primary power disconnected or power source has failed. Primary power may be below 10 Vdc. Subscriber does not link Modem at Base Station or Subscriber may be disabled. Base Station and Subscriber radio configurations may not match. Base Station transmitter power may be turned down. Base Station and Subscriber WiMAX security settings may not match. Unable to pass data end-to-end The antenna(s) may be misaligned. The Subscriber may not be linked. MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 37 An Ethernet port at the Base Station or Subscriber may be disconnected or disabled. The Base Station or Subscriber may be misconfigured in regard to VLAN and VLAN trunk port settings. The IP addressing of the source and destination devices may be mismatched. Weak or poor quality signal at Subscriber The Base Station transmit power may be set too low. Check the gain and loss in the antenna system and cabling to determine the maximum allowable transmit power. Unable to login due to lost Password The antenna(s) may be misaligned. The signal path may be too obstructed. Attempt to find a better location for the antenna. There may be too much interference on the channel or an adjacent channel. Use a spectrum analyzer to view the RF activity in the band. Move operation to a different frequency if available. The radio hardware may be damaged. Test the unit on a bench cabled directly (through an attenuator) to another known working unit. The configuration, including the user account passwords for the unit, can be reset by logging in with a special user account and entering an authorization key. The authorization key is a cryptographic key generated by GE MDS for the specific serial number of the device. The key can be obtained by contacting GE MDS Technical Services. Once the key is obtained, it can be entered in to the unit by logging in with username authcode and password authcode. When logged in, the unit will prompt for the authorization key. This process resets the configuration of the device to the defaults. This causes the username and password to be set to admin. 6.0 SITE INSTALLATION GUIDE This section provides tips for selecting an appropriate site, choosing an antenna system, and reducing the chance of harmful interference. NOTE: To prevent moisture from entering the radio, do not mount the radio with the cable connector s pointing up. Al so, dress all cables to prevent moisture from running along the cables and into the radio. 38 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A 6.1 General Requirements There are three main requirements for installing a transceiverade-

quate and stable primary power, a good antenna system, and the correct interface between the transceiver and the data device. Figure 22 shows a typical Subscriber Unit installation. NOTE: The network port supports 10BaseT connections, but does not support 100BaseT connections. This should not present a problem as most hubs/switches auto-switch between 10BaseT and 100BaseT connections. Conf irm that your hub/switch is capable of auto-switching data rates. To prevent Ethernet traffic throughput performance, place the unit in a segment, or behind routers. from degrading transceiver Invisible place holder RTU/PLC ANTENNA SYSTEM Subscriber: Directional Ant. Base Unit: Omni Ant. LOW-LOSS COAX TO DC POWER SUPPLY

(1060 Vdc) Ethernet Cable to Radio Ethernet Cable to Radio PC FOR RADIO MANAGEMENT Figure 22. Typical Installation with a Tower-Mounted Antenna

(SU shown; BS Similar) NOTE: When using Power over Ethernet (PoE), do not use data lines to carry power. Suitable power supply models are listed in the GE MDS Accessories Guide. MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 39 DIN Rail Mounting Option Mounting Considerations The unit is normally supplied with brackets for mounting to any flat sur-

face. If possible, choose a mounting location that provides easy access to the connectors on the end of the radio and an unobstructed view of the LED status indicators. The unit may also be mounted with an optional 35mm DIN Rail Mounting Bracket (Part No. 03-4022A06). Equipment cabinets and racks of recent design often employ this type of mounting. Once the DIN bracket is mounted to the transceiver case, it allows for quick installa-

tion and removal of the radio without the need for tools of any kind. Figure 23 shows how the DIN Rail bracket attaches to the back of the units case, and how the entire unit attaches to the mounting rail. Invisible place holder Release Tab Step 1: Attach the bracket using the the two screws provided. (Attach to the end opposite the connectors.) Step 2: Snap the assembly onto the DIN Rail. Removal is performed by pulling down on the release tab. Figure 23. DIN Rail Mounting of GE MDS Equipment

(Unit shown is for example only, and is not a Mercury Transceiver) 6.2 Site Selection Suitable sites should provide:

Protection from direct weather exposure A source of adequate and stable primary power Suitable entrances for antenna, interface or other required cabling Antenna location that provides as unobstructed a transmission path as possible in the direction of the associated station(s) These requirements can be quickly determined in most cases. A possible exception is the last itemverifying that an unobstructed transmission path exists. Radio signals travel primarily by line-of-sight, and obstruc-

tions between the sending and receiving stations will affect system per-

40 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A formance. If you are not familiar with the effects of terrain and other obstructions on radio transmission, the discussion below will provide helpful background. 6.3 Equipment Grounding To minimize the chance of damage to the transceiver and connected equipment, a safety ground (NEC Class 2 compliant) is recommended which bonds the antenna system, transceiver, power supply, and con-

nected data equipment to a single-point ground, keeping all ground leads as short as possible. Normally, the transceiver is adequately grounded if the supplied flat mounting brackets are used to mount the radio to a well-grounded metal surface. If the transceiver is not mounted to a grounded surface, it is rec-

ommended that a safety ground wire be attached to one of the mounting brackets or a screw on the transceivers case. The use of a lightning protector is recommended where the antenna cable enters the building; Bond the protector to the tower ground, if pos-

sible. 6.4 LAN Port The transceivers LAN Port is used to connect the radio to an Ethernet network. The transceiver provides a data link to an Internet Pro-

tocol-based (IP) network via the Access Point station. Each radio in the network must have a unique IP address for the network to function prop-

erly. To connect a PC directly to the radios LAN port, an RJ-45 to RJ-45 cross-over cable is required. To connect the radio to a Ethernet hub or bridge, use a straight-through cable. The connector uses standard Ethernet RJ-45 cables and wiring. For custom-made cables, use the pinout information in Figure 6-1 and Table 6-1. 1 2 3 4 5 6 7 8 Figure 6-1. LAN Port (RJ-45) Pinout

(Viewed from the outside of the unit) Table 6-1. LAN Port (IP/Ethernet) Pin 1 2 Functions Transmit Data (TX) Transmit Data (TX) Ref. High Low MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 41 Ref. High Table 6-1. LAN Port (IP/Ethernet) Pin 3 4 5 6 7 8 Functions Receive Data (RX) Unused Unused Receive Data (RX) Unused Unused Low 6.5 COM1 Port To connect a PC to the transceivers COM1 port use a DB-9M to DB-9F straight-through cable. These cables are available commercially, or may be constructed using the pinout information in Figure 6-1 and Table 6-1. 5 1 9 6 Figure 6-1. COM1 Port (DCE)

(Viewed from the outside of the unit.) Table 6-1. COM1 Port Pinout, DB-9F/RS-232 Interface Pin 1 2 3 4 5 69 DCE Functions Unused Receive Data (RXD) Transmit Data (TXD) >[In Unused Signal Ground (GND) Unused

<[Out 6.6 Antenna & Feedline Selection NOTE: The transceiver is a Professional Installation radio system and must be installed by trained prof essional installers, or factory trained technicians. The text that follows is designed to aid the professional installer in the proper methods of maintaining compliance with FCC limits. Par t 15 l imits the power to +36 dBm or 4 watts peak E.I.R.P limit. For WiMAX DTS radios, the maxiumum allowed ERP is 1 Watt per MHz. 42 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A Antennas The equipment can be used with a number of antennas. The exact style used depends on the physical size and layout of a system. Contact your factory representative for specific recommendations on antenna types and hardware sources. In general, a sector type antenna is used at the Base Station site. This provides equal coverage to all of the Subscriber sites. At Remote Gateway sites and units in point-to-point LANs, a directional Yagi (Figure 24) antenna is generally recommended to minimize interference to and from other users. Antennas are available from a number of manufacturers. Invisible place holder Figure 24. Typical Yagi Antenna (mounted to mast) Feedlines The choice of feedline used with the antenna should be carefully consid-

ered. Poor-quality coaxial cables should be avoided, as they will degrade system performance for both transmission and reception. The cable should be kept as short as possible to minimize signal loss. We recommend using a low-loss cable type suited for the frequency of oper-

ation, such as Heliax. Table 6-1 lists several types of popular feedlines and indicates the approximate signal losses (in dB) that result when using various lengths of cable at 1800 MHz. Note that losses will be approximately doubled for 3650 MHz and tripled for 5800 MHz. The choice of cable will depend on the required length, cost considerations, and the amount of signal loss that can be tolerated. MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 43 Table 6-1. Length vs. Loss in Coaxial Cables at 1800 MHz Cable Type RG-214 10 Feet

(3.05 m) 1.52 dB 50 Feet

(15.24 m) 7.6 dB LMR-400 0.78 dB 3.9 dB 100 Feet

(30.48 m) Unacceptable Loss 7.8 dB 1/2 inch HELIAX 0.46 dB 2.3 dB 4.58 dB 7/8 inch HELIAX 0.26 dB 1.28 dB 2.56 dB 1-1/4 inch HELIAX 1-5/8 inch HELIAX 0.20 dB 0.16 dB 0.96 dB 0.8 dB 1.9 dB 1.6 dB 500 Feet

(152.4 m) Unacceptable Loss Unacceptable Loss Unacceptable Loss Unacceptable Loss 9.5 dB 8.00 dB NOTE: The authority to operate th e transceiver may be void if antennas other than those appr oved by the applicable regula-

tory authority are used. Contact your factory representative for additional antenna information. GPS Cabling & Antenna The antenna to be used with the transceivers built-in GPS receiver should be a 16 or 26 dBi active antenna designed for the GPS satellite band. The GPS antenna connector delivers a 3 Vdc supply to power the electronics in the active antenna. 6.7 Conducting a Site Survey If you are in doubt about the suitability of the radio sites in your system, it is best to evaluate them before a permanent installation is underway. This can be done with an on-the-air test (preferred method); or indi-

rectly, using path-study software. An on-the-air test is preferred because it allows you to see firsthand the factors involved at an installation site and to directly observe the quality of system operation. Even if a computer path study was conducted ear-

lier, this test should be done to verify the predicted results. The test can be performed by first installing a radio and antenna at the proposed Base Station (BS) site (one-per-system). Then visit the Sub-

scriber site(s) with another transceiver and a hand-held antenna. (A PC with a network adapter can be connected to each radio in the network to simulate data during this test using the PING command.) With the hand-held antenna positioned near the proposed mounting spot, a technician can check for synchronization with the Base Station

(shown by a lit LINK LED on the front panel) and measure the reported 44 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A RSSI value. (See Antenna Heading Optimization on Page 46 for details.) If adequate signal strength cannot be obtained, it may be neces-

sary to mount the station antennas higher, use higher gain antennas, select a different site or consider installing a repeater station. 6.8 A Word About Radio Interference The transceiver shares the RF spectrum with other services and devices. As such, near 100% error-free communications may not be achieved in a given location, and some level of interference should be expected. However, the radios flexible design should allow adequate perfor-

mance as long as care is taken in choosing station location, configura-

tion of radio parameters and software/protocol techniques. In general, keep the following points in mind when setting up your com-

munications network. Systems installed in rural areas are least likely to encounter interfer-

ence; those in suburban and urban environments are more likely to be affected by other devices operating in the same spectrum. Use a directional antenna at remote sites whenever possible. Although these antennas may be more costly than omnidirectional types, they confine the transmission and reception pattern to a com-

paratively narrow lobe, that minimizes interference to (and from) stations located outside the pattern. If interference problems persist, try reducing the length of data streams. Groups of short data streams have a better chance of getting through in the presence of interference than do long streams. The power output of all radios in a system should be set for the low-

est level necessary for reliable communications. This lessens the chance of causing unnecessary interference to nearby systems. If you are not familiar with these interference-control techniques, con-

tact your factory representative for more information. 6.9 Radio (RF) Measurements There are several measurements that should be performed during the ini-

tial installation. These will confirm proper operation of the unit and if recorded, can serve as a benchmark for troubleshooting should difficul-

ties appear in the future. These measurements are:

Transmitter Power Output Antenna System SWR (Standing Wave Ratio) Antenna Heading Optimization (RSSI) These procedures may interrupt traffic through an established network and should only be performed by a skilled radio-technician in coopera-

tion with the network manager. MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 45 Introduction Procedure Introduction Transmitter Power Output and Antenna System SWR A proper impedance match between the transceiver and the antenna system is important. It ensures the maximum signal transfer between the radio and antenna. The impedance match can be checked indirectly by measuring the SWR (Standing Wave Ratio) of the antenna system. If the results are normal, record them for comparison for use during future routine preventative maintenance. Abnormal readings indicate a pos-

sible trouble with the antenna or the transmission line that will need to be corrected. The SWR of the antenna system should be checked before the radio is put into regular service. For accurate readings, a wattmeter suited to the frequency of operation is required. One example of such a unit is the Bird Model 43 directional wattmeter with an appropriate element installed. The reflected power should be less than 10% of the forward power

(2:1 SWR). Higher readings usually indicate problems with the antenna, feedline or coaxial connectors. If the reflected power is more than 10%, check these areas for damage. 1. Place a directional wattmeter between the radio (TX/RX connector) and the antenna system. 2. With the transmitter keyed, measure the forward and reflected power on the wattmeter. Reflected power should be no more than 10% of the forward power. Record these readings for future refer-

ence. NOTE: The transmitter has a 10-minute ti mer. When in test mo de, it of continuous operation. The will dekey after 10 minutes Radio can also be dekeyed by temporarily disconnecting the radios DC power. 3. Dekey the transmitter and disconnect the wattmeter. Reconnect the antenna feedline to the radio. End of procedure Antenna Heading Optimization The radio network integrity depends, in a large part, on stable radio signal levels being received at each end of a data link. In general, signals stronger than 80 dBm provide reliable communication that includes a fade margin for signal variances. As the distance between the Base Sta-

tion and Subscriber Unit increases, the influence of terrain, foliage and man-made obstructions become more influential and the use of direc-

tional antennas at Remote locations becomes necessary. Directional antennas usually require some fine-tuning of their bearing to optimize 46 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A Procedure the received signal strength. The transceiver has a built-in received signal strength indicator (RSSI) that can be used to tell you when the antenna is in a position that provides the optimum received signal. RSSI measurements and Wireless Packet Statistics are based on mul-

tiple samples over a period of several seconds. The average of these measurements will be displayed by the Management System. The path to the Management System menu item is shown in bold text below each step of the procedure. 1. Verify that the Subscriber is associated with the Base Unit unit by observing that the LINK LED is on or blinking). 2. View and record the Packets Dropped and Receive Errors on the LAN1/LAN2 Statistics window. This information will be used later. 3. Clear the LAN1/LAN2 Statistics. 4. Read the RSSI level at the Subscriber Unit.

(Maintenance & Status>>Performance>>RSSI) 5. Optimize RSSI (less negative indicates a stronger signal) by slowly adjusting the direction of the antenna. Watch the RSSI for several seconds after making each adjustment so that it accurately reflects any change in the link signal strength. 6. Once RSSI is optimized, view the Packets Dropped and Receive Error rates. They should be the same or lower than the previous

(recorded) readings. If the RSSI peak results in an increase in the Wireless Packets Dropped and Received Error, the antenna may be aimed at an unde-

sired signal source. Try a different antenna orientation. End of procedure. 7.0 dBm-WATTS-VOLTS CONVERSION CHART Table 7-1 is provided as a convenience for determining the equivalent voltage or wattage of an RF power expressed in dBm. Table 7-1. dBm-Watts-Volts conversionfor 50 ohm systems MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 47 Po dBm V

+53

+50

+49

+48

+47

+46

+45

+44

+43

+42

+41

+40

+39

+38

+37

+36

+35

+34

+33

+32

+31

+30

+29

+28

+27

+26

+25

+24

+23

+22

+21

+20

+19

+18

+17

+16

+15

+14

+13

+12

+11

+10

+9

+8

+7

+6

+5

+4

+3

+2

+1 100.0 200W 100W 70.7 80W 64.0 64W 58.0 50W 50.0 40W 44.5 40.0 32W 25W 32.5 20W 32.0 16W 28.0 12.5W 26.2 10W 22.5 20.0 8W 6.4W 18.0 5W 16.0 4W 14.1 3.2W 12.5 2.5W 11.5 2W 10.0 9.0 1.6W 1.25W 8.0 1.0W 7.10 800mW 6.40 640mW 5.80 500mW 5.00 4.45 400mW 320mW 4.00 250mW 3.55 200mW 3.20 160mW 2.80 125mW 2.52 2.25 100mW 80mW 2.00 64mW 1.80 50mW 1.60 40mW 1.41 32mW 1.25 1.15 25mW 20mW 1.00 16mW

.90 12.5mW

.80 10mW

.71 8mW

.64 6.4mW

.58

.500 5mW 4mW

.445 3.2mW

.400 2.5mW

.355 2.0mW

.320 1.6mW

.280

.252 1.25mW Po 1.0mW

.80mW

.64mW

.50mW

.40mW

.32mW

.25mW

.20mW

.16mW

.125mW

.10mW dBm V 0

-1

-2

-3

-4

-5

-6

-7

-8

-9

-10

-11

-12

-13

-14

-15

-16

.225

.200

.180

.160

.141

.125

.115

.100

.090

.080

.071

.064

.058

.050

.045

.040

.0355

.001mW

.01mW dBm mV Po

-17

-18

-19

-20

-21

-22

-23

-24

-25

-26

-27

-28

-29

-30

-31

-32

-33

-34

-35

-36

-37

-38

-39

-40

-41

-42

-43

-44

-45

-46

-47

-48 31.5 28.5 25.1 22.5 20.0 17.9 15.9 14.1 12.8 11.5 10.0 8.9 8.0 7.1 6.25 5.8 5.0 4.5 4.0 3.5 3.2 2.85 2.5 2.25 2.0 1.8 1.6 1.4 1.25 1.18 1.00 0.90

.1W dBm V

-98 2.9 2.51

-99 2.25

-100 2.0

-101 1.8

-102 1.6

-103

-104 1.41 1.27

-105

-106 1.18 dBm nV 1000

-107

-108 900 800

-109 710

-110 640

-111 580

-112 500

-113

-114 450 400

-115 355

-116 325

-117 285

-118 251

-119 225

-120

-121 200 180

-122 160

-123 141

-124 128

-125 117

-126

-127 100 90

-128 80

-129 71

-130 61

-131 58

-132

-133 50 45

-134 40

-135 35

-136 33

-137 29

-138

-139 25 23

-140 Po

.1pW Po

.01pW

.001pW

.1W

.01W

.01W dBm mV Po

-49

-50

-51

-52

-53

-54

-55

-56

-57

-58

-59

-60

-61

-62

-63

-64 0.80 0.71 0.64 0.57 0.50 0.45 0.40 0.351 0.32 0.286 0.251 0.225 .001W 0.200 0.180 0.160 0.141 Po

.1nW

.01nW

.001nW dBm V

-65 128 115

-66 100

-67 90

-68 80

-69 71

-70 65

-71

-72 58 50

-73 45

-74 40

-75 35

-76 32

-77

-78 29 25

-79 22.5

-80 20.0

-81 18.0

-82 16.0

-83

-84 11.1 12.9

-85 11.5

-86 10.0

-87 9.0

-88 8.0

-89

-90 7.1 6.1

-91 5.75

-92 5.0

-93 4.5

-94 4.0

-95 3.51

-96

-97 3.2 8.0 PERFORMANCE NOTES The following is a list of points that are useful for understanding the per-

formance of the radio in your installation. 8.1 Wireless Bridge The transceiver acts as a Layer 2 network bridge. If any radio in your network is connected to a large LAN, such as may be found in a large office complex, there may be undesired multicast/broadcast traffic over the air. As a bridge, the radios transmit this type of frame. The radio goes through a listening and learning period at start-up before it will send any packets over either of its ports. This is about 10 seconds after the CPUs operating system has finished its boot cycle. 48 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A The bridge in the transceiver operates and makes decisions about packet forwarding just like any other bridge. The bridge builds a list of source MAC addresses that it has seen on each of its ports. There are a few general rules that are followed when a packet is received on any port:

If the destination address is a multicast or broadcast address, forward the packet to all ports. If the destination address is not known, forward the packet to all ports. If the destination address is known, forward the packet to the port that the destination is known to be on. Spanning Tree Protocol (STP)* is used by the bridge to pre-

vent loops from being created when connecting bridges in parallel. For example, connecting two remotes to the same wired LAN could create a loop if STP was not used. Every bridge running STP sends out Bridge Protocol Data Units

(BPDUs) at regular intervals so that the spanning tree can be built and maintained. BPDUs are 60-byte multicast Ethernet frames. NOTE: STP will be available in 2012. 8.2 Distance-Throughput Relationship Distance affects throughput. Because of timers and other components of the protocol, there is a practical distance limit of 30 miles (48 km) for reliable operation. After this, although data still flows, the throughput will begin to drop and latency will increase, due to additional retries between the radios. Packets may start to be dropped. Some applications may tolerate this; others may not. Repeater stations may be used to extend the range. 8.3 Data LatencyTCP versus UDP Mode The latency of data passing through a network will depend on user data message length, the overall level of traffic on the network, and the quality of the radio path. Under ideal conditionsand without the use of QoSwith low traffic and good RF signal path, the latency for units operating in the TCP mode will typically be around 50 ms in each direction. 8.4 Packets-per-Second (PPS) The radio has a limit of approximately 800 PPS. Consider this restriction when planning your network, especially when smaller packets are MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 49 expected to make up the majority of the traffic as is the case with VoIP

(Voice over IP). 8.5 Subscriber-to-Subscriber Traffic When sending frames from an endpoint connected to one Subscriber to another endpoint with a different Subscriber, the throughput will be halved at best. This is because all frames must go through the Base Sta-

tion and thus are transmitted twice over the same radio system. There-

fore, in the previous 100-byte UDP example, the number of over-the-air bytes will be 380 bytes (190 bytes x 2) if the frame has to go sub-

scriber-to-subscriber. 8.6 Interference has a Direct Correlation to Throughput Interference could be caused by other radios at the same site, in nearby locations, or by high power transmitters such as paging systems. Such interference will have a negative effect on data throughput of the radio system. 8.7 Placing the Radio Behind a Firewall Mercury radios use the port numbers listed below. If you place the radio behind a firewall, make sure these port numbers are included in the allowed list:

SSH:

TELNET:

TFTP:

HTTP:

NTP:

SNMP:

SNMP-TRAP:

HTTPS:

SYSLOG:

22 23 69 80 123 161 162 443 514

<- Management

<- Management

<- Reprogramming

<- Management

<- Time server

<- Management

<- Event management via traps

<- Management

<- Event management via remote syslog server These well-known port numbers follow the recommendation of IANA. For more information, go to http://www.iana.org/assignments/port-numbers. 50 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A 9.0 INDEX OF CONFIGURATION PARAMETERS Table 7. Configuration Parameters Location Parameter Description Configuration Identity & Time Device Name Contact Location Description Console Baud Rate Date Format SNTP Server Date Time UTC Time Offset The Device Name is a user-configurable parameter that is used to ease configuration and monitoring. Typically this parameter is set to a label that makes it easy to identify the specific unit. The Contact parameter is used to indicate a contact in case of inquiry or problem with the unit. This parameter is used for the SNMP MIB-II object. The Location parameter is used to indicate the physical location of the device. This parameter is used for the SNMP MIB-II object. This parameter is used for the SNMP MIB-II object. This parameter controls the baud rate of the DB-9 RS-232 serial port in console mode. The date format adjusts how the current date is displayed. This parameter is used to set the address of an SNTP (Simple Network Time Protocol) server on the network. The device will get its time of day from the server. Current date. This can be set manually or through the use of GPS (if optional hardware is present) or an SNTP server. Current time. This can be set manually or through the use of GPS (if optional hardware is present) or an SNTP server. The UTC Time Offset is used to adjust the time of day to local time. For example Eastern Standard Time has a

-5 UTC offset. Default Value Possible Values

<blank>

Up to 40 characters

<blank>

Up to 40 characters

<blank>

Up to 40 characters

<blank>

Up to 40 characters 115200 bps 2400 to 115200 Generic US, EUR, Generic 0.0.0.0 n/a n/a 0

-12 to 12 MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 51 Location Parameter Description Table 7. Configuration Parameters Configuration IP

& Networking VLAN Status IP Address Mode Static IP Address Static IP Netmask Static IP Gateway Configuration -

Radio Frequency RF Bandwidth Adaptive Modulation Adaptive Modulation Estimation Margin Protection Margin Hysteresis Margin MIMO Type The VLAN Status parameter controls whether the VLAN capability of the device is enabled or not. Enabling the VLAN Status allows the configuration of trunk and access ports along with VLAN IDs and VLAN IP Addresses. The Mercury transceiver can be configured with a static IP address or it can used DHCP to obtain an IP address from a server on the network. This is the IP address that the Mercury transceiver uses for its management interfaces (web, SNMP, SSH, and telnet). This is the Netmask used in conjunction with the Static IP Address This is the IP address of a Gateway device on the network used for inter-subnet routing. This is the operating frequency of the WiMAX radio interface. Frequency range limits can be affected by bandwidth selection. This is the operating bandwidth of the WiMAX radio interface. This parameter allows the WiMAX modem to automatically choose the modulation and FEC coding rate that best matches the channel. The MIMO Type parameter controls the use of the second RF antenna port. In Matrix A/B mode, the Mercury transceiver automatically chooses the appropriate operating mode according to the packet error rate (PER) performance of the wireless channel. Default Value Possible Values Disabled Static Static or Dynamic 192.168.1.1 255.255.255.0 0.0.0.0 3662.5 or 1815 MHz 3651.75 to 3670 1800 to 1830 3.5 MHz 3.5, 5, 7, 8.75, 10 Enabled 3dB 0 to 100 3 0 to 10 3 0 to 10 None None, Matrix A, Matrix A/B 52 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A Location Parameter Description Table 7. Configuration Parameters Frame Profile The Frame Profile controls the amount of time allocated to the downlink and uplink portions of the WiMAX frame. To operate in a WiMAX compatible mode, choose one of the specific profiles for the chosen RF bandwidth. The Frame Profile can also be set to None. When set to None, the user can set a specific percentage for the downlink sub-frame. The percentage of the frame to be used for the Downlink subframe. This parameter only applies when the Frame Profile is set to None This is the Base Station parameter that enables the use of Hybrid Automatic Repeat Request. This is the Subscriber parameter that selects the type of Hybrid Automatic Repeat Request that is used. This is the Base Station parameter that enables the use of Automatic Repeat Request. The Block Size specifies the number of bytes that are placed into an ARQ block. The ARQ block is the basic unit of exchange in the ARQ protocol. The Window Size specifies the number of ARQ blocks in the ARQ Window. The ARQ Window is the number of blocks that can be outstanding at one time. The Block Lifetime specifies how long an ARQ block is considered valid after the blocks initial transmission. If the receiver does not acknowledge the block within the lifetime, the block is discarded. Downlink Percentage HARQ HARQ Category ARQ ARQ Block Size ARQ Window Size ARQ Block Lifetime ARQ Transmitter Delay ARQ Receiver Delay Default Value Possible Values None None, 3.5MHz-21-12, 5MHZ-29-18, 5MHz-30-17, 5MHz-32-15, 7MHz-21-12, 8.75MHZ-27-15, 10MHz-26-21, 10MHz-29-18, 10MHz-32-15, 10MHz-35-12 50 Enabled 3 1 to 4 Enabled 64 bytes 16 to 1024 512 blocks 1 to 1024 250 msec 0 to 655 msec 35 msec 1 to 655 msec 35 msec 1 to 655 msec MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 53 Location Parameter Description Table 7. Configuration Parameters Configuration-

Services DHCP Server Status This parameter enables the on-board DHCP server. DHCP Netmask DHCP starting address DHCP ending address DHCP DNS address DHCP WINS address SNMP Mode Configuration Security Telnet access SSH access HTTP Mode HTTP Auth Mode User Auth Method User Auth Fallback This is the netmask that the on-board server specifies to its clients. This is the first IP address in the servers pool. This is the last IP address in the servers pool. This is the DNS server IP address that the server specifies to its clients. This is the WINS server IP address that the server specifies to its clients. This parameter specifies the protocol(s) that the SNMP agent should support. This parameter allows or disallows the TELNET interface to operate. For secure installations, it is recommended that TELNET be disabled. This parameter allows or disallows the SSH interface to operate. The operation of the web server can be disabled or set to HTTP or HTTPS mode. The HTTPS mode provides a level of security. This parameter defines the authentication method when using HTTPS. Basic Auth causes the user to login with a username and password. MD5 causes the username and password to be passed over network as an MD5 hash. The username and password of a user can be validated locally against the information that the device has or it can be validated using RADIUS. The use of RADIUS requires configuration of parameters on the RADIUS configuration screen. If the User Auth Method is RADIUS but the RADIUS Server cannot be reached, this parameter determines if the local password information is used to validate the users credentials. If this parameter is set to None, then only the RADIUS server can validate the credentials. Default Value Possible Values Disabled 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 Disabled Disabled, V1-only, V2-only, V3-only, V1-V2, V1-V2-V3 Enabled Enabled HTTP Disabled, HTTP, HTTPS Basic Auth Basic Auth, MD5 Local Local, RADIUS None None, Local 54 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A Location Parameter Description Table 7. Configuration Parameters Device Auth Mode Determines if WiMAX PKMv2 security is enabled. RADIUS Server 1 Address RADIUS Server 1 Port Shared Secret 1 User Auth Mode 1 RADIUS Server 2 Address RADIUS Server 2 Port Shared Secret 2 User Auth Mode 2 Certificate Type Certificate Filename User Auth Mode 2 Certificate Type Certificate Filename Maint & Status -

Events & Alarms Syslog Server Address This is the IP address of the RADIUS server. The device can also be configured with a secondary, backup RADIUS server. The UDP port that the RADIUS server is listening on. The secret phrase shared between the RADIUS server and client. The authentication protocol used between the RADIUS server and client. This is the IP address of a second RADIUS server that will be used if the first RADIUS server is not reachable. The UDP port that the RADIUS server is listening on. The secret phrase shared between the RADIUS server and client. The authentication protocol used between the RADIUS server and client. The Certificate Type parameter indicates the specific certificate that is being transferred. This can be the Root CA (Certificate Authority), Device Public certificate, or Private Key. This is the filename of the certificate that the is to be transferred. The authentication protocol used between the RADIUS server and client The Certificate Type parameter indicates the specific certificate that is being transferred. This can be the Root CA (Certificate Authority), Device Public certificate, or Private Key. This is the filename of the certificate to be transferred. The Syslog server address is an IP address of a syslog server on the network. When configured, all events will be forwarded to the server for logging. Default Value Possible Values None None, PKMv2 0.0.0.0 1812 0-65535

<blank>

PAP PAP, CHAP 0.0.0.0 1812 0-65535

<blank>

PAP PAP, CHAP RootCA ca-cert.der PAP PAP, CHAP RootCA ca-cert.der 0.0.0.0 MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 55 Location Parameter Description Table 7. Configuration Parameters Maint & Status -

Configuration Files File Media Host Address TFTP Timeout TFTP Block Size Config Filename Maint & Status -

Firmware Utilities Firmware Filename The File Media parameter is present on several pages in which files are transferred to and/or from the Mercury transceiver. The File Media indicates the source or the destination of the file to be transferred. The media can be FTP, SFTP, TFTP, or USB Flash Drive. If using a USB Flash Drive, the drive should be formatted to standard FAT32 format (typical for Microsoft Windows). The Host Address parameter is present on several pages in which files are transferred to and/or from the Mercury transceiver. The Host Address is the IP address of the FTP, SFTP, or TFTP server to be used for the file transfer. If TFTP is used for file transfers, the TFTP Timeout is used to control the protocol timeout. If TFTP is used for file transfers, the TFTP Block Size is used to control the protocol transfer size. When transferring file over wired LAN interfaces, a block size of 4096 or 8192 will make the transfer go faster. When transferring over a lossy wireless link, the block size should be kept to 512 or 1024 to minimize packet retries. This is the name of the text file containing the configuration. This filename will be used for the file transfer. The filename of the firmware image to load on the Mercury transceiver. This file will be transferred to the device according to the File Media parameter on the Firmware Utilities page. The filename will have a .mpk extension indicating that it is a GE MDS proprietary packed format file. Default Value Possible Values TFTP 0.0.0.0 15 sec 1024 bytes cfgscript.txt mer-bkrc-x_y_z.mpk 56 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A APPENDIX-A 3650 MHz Band Information Band History Historically part of the Fixed Service Satellite (FSS) allocation FSS operators are considered grandfathered operations and are provided protection in the form of exclusion zones About 85 users remain, mostly on East and West Coasts of U.S. Over 20 states with no grandfathered operations in effect Recently, the FCC allocated 50 MHz of this spectrum (3.65 3.70 GHz) for private infrastructure and rural ISP usenot con-

sumer mass deployment 3650 MHz is considered a registered band. It is neither licensed nor unlicensed Industry Canada rules patterned after FCC rules Technical Details 50 MHz spectrum divided in two bands of 25MHz each Lower 25 MHz allows Restricted protocols, upper 25MHz allows Unrestricted all fixed point installs Operation requires registration with FCC database operators, EIRP: One watt per-MHz for fixed deployments. 40 mW per-MHz for mobile operation Industry Canada rules allow Restricted protocols across the entire 50 MHz span. MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 57 U.S. Map with Exclusion Zones Supported SNMP MIBs MIB-II GE MDS proprietary MIBs WiMAX MIBs (support to be added in 2012) Accessories list Antennas Cable USB cable, CAT5, serial DB9s RF cable 58 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A APPENDIX-B Glossary of Terms & Abbreviations If you are new to wireless IP/Ethernet systems, some of the terms used in this guide may be unfamiliar. The following glossary explains many of these terms and will prove helpful in understanding the operation of your radio network. While not all of these terms apply to every use of the transceiver, they are provided to give a more complete under-

standing of common wireless concepts. Antenna System GainA figure, normally expressed in dB, repre-

senting the power increase resulting from the use of a gain-type antenna. System losses (from the feedline and coaxial connectors, for example) are subtracted from this figure to calculate the total antenna system gain. BSSee Base Station. AssociationCondition in which the Subscriber is synchronized with the Base Station and is ready to pass traffic. Authorization KeyAlphanumeric string (code) that is used to enable additional capabilities in the transceiver. Base Station (BS)The radio in a point-to-multipoint network that acts as the center or hub station. It communicates with Subscriber Unit

(SU) stations. BitThe smallest unit of digital data, often represented by a one or a zero. Eight bits (plus start, stop, and parity bits) usually comprise a byte. Bits-per-secondSee BPS. BPDUBridge Protocol Data Units. BPSBits-per-second (bps). A measure of the information transfer rate of digital data across a communication channel. ByteA string of digital data usually made up of eight data bits and start, stop and parity bits. CSMA/CACarrier Sense Multiple Access/Collision Avoidance. CSMA/CDCarrier Sense Multiple Access/Collision Detection. MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 59 Cyclic Redundancy Check (CRC)A technique used to verify data integrity. It is based on an algorithm which generates a value derived from the number and order of bits in a data string. This value is com-

pared with a locally-generated value and a match indicates that the mes-

sage is unchanged, and therefore valid. DatagramA data string consisting of an IP header and the IP message within. dBiDecibels referenced to an ideal isotropic radiator in free space. Frequently used to express antenna gain. dBmDecibels referenced to one milliwatt. An absolute unit used to measure signal power, as in transmitter power output, or received signal strength. DCEData Circuit-terminating Equipment (or Data Communications Equipment). In data communications terminology, this is the modem side of a computer-to-modem connection. COM1 Port of the transceiver is set as DCE. Decibel (dB)A measure of the ratio between two signal levels. Fre-

quently used to express the gain (or loss) of a system. DelimiterA flag that marks the beginning and end of a data packet. DHCP (Dynamic Host Configuration Protocol)An Internet stan-

dard that allows a client (i.e. any computer or network device) to obtain an IP address from a server on the network. This allows network admin-

istrators to avoid the tedious process of manually configuring and man-

aging IP addresses for a large number of users and devices. When a network device powers on, if it is configured to use DHCP, it will con-

tact a DHCP server on the network and request an IP address. The DHCP server will provide an address from a pool of addresses allo-

cated by the network administrator. The network device may use this address on a time lease basis or indefinitely depending on the policy set by the network administrator. The DHCP server can restrict alloca-

tion of IP addresses based on security policies. An Access Point may be configured by the system administrator to act as a DHCP server if one is not available on the wired network. DTEData Terminal Equipment. A device that provides data in the form of digital signals at its output. Connects to the DCE device. EncapsulationProcess in by which, a comple te data packet, such as Modbus frame or any other polled asynchronous protocol frame, is placed in the data portion of another protocol frame (in this case IP) to be transported over a network. Typically this action is done at the receiv-

ing end, before being sent as an IP packet to a network. A similar re-

60 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A versed process is applied at the ot her end of the network extracting the data from the IP envelope, resulting in the original packet in the original protocol. EndpointIP address of data equipment connected to the ports of the radio. EqualizationThe process of reducing the effects of amplitude, fre-

quency or phase distortion with compensating networks. Fade MarginThe greatest tolerable reduction in average received signal strength that will be anticipated under most conditions. Provides an allowance for reduced signal strength due to multipath, slight antenna movement or changing atmospheric losses. A fade margin of 15 to 20 dB is usually sufficient in most systems. FragmentationA technique used for breaking a large message down into smaller parts so it can be accommodated by a less capable media. FrameA segment of data that adheres to a specific data protocol and contains definite start and end points. It provides a method of synchro-

nizing transmissions. Hardware Flow ControlA transceiver feature used to prevent data buffer overruns when handling high-speed data from the connected data communications device. When the buffer approaches overflow, the radio drops the clear-to-send (CTS) line, that instructs the connected device to delay further transmission until CTS again returns to the high state. Host ComputerThe computer installed at the master station site, that controls the collection of data from one or more remote sites. HTTPHypertext Transfer Protocol. ICMPInternet Control Message Protocol. IGMP (Internet Gateway Management Protocol)Ethernet level protocol used by routers and similar devices to manage the distribution of multicast traffic in a network. IEEEInstitute of Electrical and Electronic Engineers. Image (File)Data file that contains the operating system and other essential resources for the basic operation of the radios CPU. LANLocal Area Network. LatencyThe delay (usually expressed in milliseconds) between when data is applied at the transmit port at one radio, until it appears at the receive port at the other radio. MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 61 MACMedia Access Control. MD5A highly secure data encoding scheme. MD5 is a one-way hash algorithm that takes any length of data and produces a 128 bit finger-

print. This fingerprint is non-reversible, it is computationally infea-

sible to determine the file based on the fingerprint. For more details review RFC 1321 using an Internet search. MCUMicrocontroller Unit. MIBManagement Information Base. MIMOMultiple In / Multiple Out. Mobile StationRefers to a station that moves about while main-

taining active connections with the network. Mobility generally implies physical motion. The movement of the station is not limited to a specific network and IP subnet. In order for a station to be mobile it must estab-

lish and tear down connections with various access points as it moves through the access points' territory. MTBFMean-Time Between Failures. Multiple Address System (MAS)See Point-Multipoint System. Network-Wide DiagnosticsAn advanced method of controlling and interrogating GE MDS radios in a radio network. NTPNetwork Time Protocol. OFDMOrthogonal Frequency Division Multiplex. PacketThe basic unit of data carried on a link layer. On an IP net-

work, this refers to an entire IP datagram or a fragment thereof. ScanningScanning is a process used by Subscribers to detect Base Stations on the network to which it may connect. PINGPacket INternet Groper. Diagnostic message generally used to test reachability of a network device, either over a wired or wireless net-

work. Point-Multipoint SystemA radio communications network or system designed with a central control station that exchanges data with a number of remote locations equipped with terminal equipment. PollA request for data issued from the host computer (or master PLC) to a remote radio. PortabilityA station is considered connected when it has successfully authenticated and associated with an access point. A station is consid-

62 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A ered authenticated when it has agreed with the access point on the type of encryption that will be used for data packets traveling between them. The process of association causes a station to be bound to an access point and allows it to receive and transmit packets to and from the access point. In order for a station to be associated it must first authenticate with the access point. The authentication and association processes occur automatically without user intervention. Portability refers to the ability of a station to connect to an access point from multiple locations without the need to reconfigure the network set-

tings. For example, a remote transceiver that is connected to an access point may be turned off, moved to new site, turned back on, and, assuming the right information is entered, can immediately reconnect to the access point without user intervention. PLCProgrammable Logic Controller. A dedicated microprocessor configured for a specific application with discrete inputs and outputs. It can serve as a host or as an RTU. PuTTYA free implementation of Telnet and SSH for Win32 and Unix platforms. It is written and maintained primarily by Simon Tatham Refer to http://www.pobox.com/~anakin/ for more information. RemoteA transceiver in a network that communicates with an asso-

ciated Access Point. RFIRadio Frequency Interference. RoamingA station's ability to automatically switch its wireless con-

nection between various access points (APs) as the need arises. A station may roam from one AP to another because the signal strength or quality of the current AP has degraded below what another AP can provide. When two access points are co-located for redundancy, roaming allows the stations to switch between them to provide a robust network. Roaming may also be employed in conjunction with Portability where the station has been moved beyond the range of the original AP to which it was connected. As the station comes in range of a new AP, it will switch its connection to the stronger signal. Roaming refers to a station's logical, not necessarily physical, move between access points within a specific network and IP subnet. RSSIReceived Signal Strength Indicator. RTURemote Terminal Unit. A data collection device installed at a remote radio site. SCADASupervisory Control And Data Acquisition. An overall term for the functions commonly provided through an MAS radio system. MDS 05-6302A01, Rev. A MDS Mercury 16E Technical Manual 63 SCEPSimple Certificate Enrollment Protocol. A protocol that auto-

mates the provisioning process of creating and loading x.509 digital cer-

tificates on a device. SFTPSecure File Transfer Protocol. A networking protocol used to securely transfer files between a server and a client device. SNMPSimple Network Management Protocol. SNRSignal-to-Noise Ratio. A measurement of the desired signal to ambient noise levels.This measurement provides a relative indication of signal quality. Because this is a relative number, higher signal-to-noise ratios indicate improved performance. SNTPSimple Network Time Protocol. SSLSecure Socket Layer. SSHSecure Shell. STPSpanning Tree Protocol. Subscriber Unit (SU)A radio in a point-to-multipoint network that acts as a remote, and communicates with the Base Station (BS). SWRStanding-Wave Ratio. A parameter related to the ratio between forward transmitter power and the reflected power from the antenna system. As a general guideline, reflected power should not exceed 10%

of the forward power ( 2:1 SWR). TCPTransmission Control Protocol. TFTPTrivial File Transfer Protocol. Trap ManagerSoftware that collects SNMP traps for display or log-

ging of events. UDPUser Datagram Protocol. UTPUnshielded Twisted Pair. VLANVirtual Local Area Network. WINSWindows Internet Naming Service. Part of Microsoft Win-

dows NT and 2000 servers that manages the association of workstation names and locations with Internet Protocol addresses. It works without the user or an administrator having to be involved in each configuration change. Similar to DNS. X.509 CertificatesA standardized format for digital certificates used in security protocols and algorithms. 64 MDS Mercury 16E Technical Manual MDS 05-6302A01, Rev. A IN CASE OF DIFFICULTY... GE MDS products are designed for long life and trouble-free operation. However, this equipment, as with all electronic equipment, may have an occasional component failure. The following information will assist you in the event that servicing becomes necessary. TECHNICAL ASSISTANCE Technical assistance for GE MDS products is available from our Technical Support Department during business hours (8:30 A.M.6:00 P.M. Eastern Time). When calling, please give the complete model number of the radio, along with a description of the trouble/symptom(s) that you are experiencing. In many cases, problems can be resolved over the telephone, without the need for returning the unit to the factory. Please use one of the following means for product assistance:

Phone: 585 241-5510 FAX: 585 242-8369 E-Mail: gemds.techsupport@ge.com Web: www.gemds.com FACTORY SERVICE Component level repair of this equipment is not recommended in the field. Many components are installed using surface mount technology, which requires specialized training and equipment for proper servicing. For this reason, the equipment should be returned to the factory for any PC board repairs. The factory is best equipped to diagnose, repair and align your radio to its proper operating specifications. If return of the equipment is necessary, you must obtain a Service Request Order (SRO) number. This number helps expedite the repair so that the equipment can be repaired and returned to you as quickly as possible. Please be sure to include the SRO number on the outside of the shipping box, and on any corre-

spondence relating to the repair. No equipment will be accepted for repair without an SRO number. SRO numbers are issued online at www.gemds.com/support/product/sro/. Your number will be issued immediately after the required information is entered. Please be sure to have the model number(s), serial number(s), detailed reason for return, ship to address, bill to address, and contact name, phone number, and fax number available when requesting an SRO number. A purchase order number or pre-payment will be required for any units that are out of warranty, or for product conversion. If you prefer, you may contact our Product Services department to obtain an SRO number:

Phone Number: 585-241-5540 Fax Number: 585-242-8400 E-mail Address: gemds.productservices@ge.com The radio must be properly packed for return to the factory. The original shipping container and packaging materials should be used whenever possible. All factory returns should be addressed to:

GE MDS, LLC Product Services Department

(SRO No. XXXX) 175 Science Parkway Rochester, NY 14620 USA When repairs have been completed, the equipment will be returned to you by the same shipping method used to send it to the factory. Please specify if you wish to make different shipping arrangements. To inquire about an in-process repair, you may contact our Product Services Group using the telephone, Fax, or E-mail information given above. GE MDS, LLC 175 Science Parkway Rochester, NY 14620 FAX: +1 585 242-9620 Telephone: +1 585 242-9600 www.gemds.com