FCC ID: 2BBYN-BBT2 Bikebac Tracker

TRACKER Model: BBT2 Instructions:

Works With Apple Find My How to Connect:

1. Open the Find My app on your iPhone or iPad, choose "Items" tab, tap "Add New Item" and "Other Supported Item"

2. While the Find My app is searching, press the button on your Bikebac Tracker once and you will hear a beep. 3. After setup, you can locate your Bikebac Tracker in the Find My App on your iPhone, iPad, iPod Touch, or Mac. Remove/Uninstall:

1. Navigate to the item page on the Find My app. 2. Scroll to the bottom. 3. Tap"Remove item", then "Remove". Enabling Lost Mode:

1. Navigate to the item page on the Find My app. 2. Click the name of your Bikebac Tracker to open the options. Then swipe up on the name. 3. Under Lost Mode select Enable. 4. Continue through the prompts to enter your contact details (email or phone number) to enable lost mode. How To Disable:

1. Remove screws and pry Bikebac Tracker open along the plastic seam. 2. Remove the battery. Learn More Instructions:

1. Locate the button on the bottom of the Bikebac Tracker. 2. Short press the button. A confirmation beep will sound. Specifications:

Product weight: 22g Product battery specification: CR2032 200MAH Product voltage: 3V DC Bluetooth version: REV 5.2 OS Compatibility: IOS 7.0 and above Transmission distance: 30-50 m (open and rectilinear distance) Operating temperature: -10 ~55 Product Size: 81mm x 45.25mm x 9.25mm Ingress Resistance: IP67 Regulatory & Safety Information This device complies with CE and FCC directives. This device complies with Part 15 of the FCC Rules and with Industry Canada license-ecempt RSS standard(s). Operation is subject to the following two conditions:

1. 2. This device may not cause harmful interference, and This device must accept any interference recieved, including interference that may cause undesired operation. The relevant Declaration of Conformity is available at www.bikebac.com/regulatory. Any changes or modifications not expressly approved by the party responsible for compliance may void the authorization to operate this equipment. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

1. Lappareil ne doit pas produire de brouillage;

2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. RF Exposure Information This equipment complies with the FCC and ISED radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet quipement est conforme aux limites d'exposition aux rayonnements de la FCC et de l'ISED tablies pour un environnement non contrl. Cet metteur ne doit pas tre co-

localis ou fonctionner en conjonction avec une autre antenne ou un autre metteur. Proudly Founded in Whistler, BC. All Rights Reserved. Various trademarks held by their respective owners. Apple, iPad, iPhone, iPadOS and macOS are trademarks of Apple Inc., registered in the U.S. and other countries. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Reference No.: WTX23X06133996W001 Page 1 of 9 ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the devices expected lifetime. Proposed Label Location on EUT FCC ID Label Location Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn

Gearbac Technologies Inc. 135-4800 Spearhead Drive, Whistler, BC, V8E 1G1, Canada Date: 2023-07-24 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d) (5) (i) Filing SUBJECT: FCC Application for FCC ID: 2BBYN-BBT2 To Whom It May Concern:

Gearbac Technologies Inc. certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signatory

[Brian White, Business Leader]

Gearbac Technologies Inc. 135-4800 Spearhead Drive, Whistler, BC, V8E 1G1, Canada Date: 2023-07-24 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d) (5) (ii) Filing SUBJECT: FCC Application for FCC ID: 2BBYN-BBT2 To Whom It May Concern:

Gearbac Technologies Inc. certifies that, as of the date of the filing of the application, the applicant is not i dentified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely, Signatory

[Brian White, Business Leader]

Gearbac Technologies Inc. 135-4800 Spearhead Drive, Whistler, BC, V8E 1G1, Canada Date: 2023-07-24 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2BBYN-BBT2 Confidentiality Request To whom it may concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. Block Diagram Operational Description Schematics Parts List Tune-Up Information Security Information Software Defined Radio (SDR) Information The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Internal Photos Test Setup Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. or For 180 days pursuant to KDB 726920 D01. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signatory

[Brian White, Business Leader]

Gearbac Technologies Inc. 135-4800 Spearhead Drive, Whistler, BC, V8E 1G1, Canada Date: 2023-07-24 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2BBYN-BBT2 To Whom It May Concern:

POWER OF ATTORNEY We, the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Gearbac Technologies Inc. are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Signatory

[Brian White, Business Leader]

Gearbac Technologies Inc. 135-4800 Spearhead Drive, Whistler, BC, V8E 1G1, Canada Date: 2023-07-24 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2BBYN-BBT2 US Agent Attestation Statement / Part 2.911(d)(7) Gearbac Technologies Inc certifies that, as of 2023-07-20, we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2BBYN-BBT2. Gearbac Technologies Inc, accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of Gearbac Technologies Inc for FCC ID: 2BBYN-BBT2. Designated Agent Information:

Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: Support@FCCUSAgent.com Sincerely, Company: Gearbac Technologies Inc Designated Agent: FCC US Agent, LLC Company Representative: Brian White Designated Agent Representative: Tim Payne Signature:

Signature: