Cinterion ALAS66A Hardware Interface Overview Version:
DocId:
01.000a ALAS66A_HIO_v01.000a GEMALTO.COM/M2M Cinterion ALAS66A Hardware Interface Overview Page 2 of 51 2 Document Name: Cinterion ALAS66A Hardware Interface Overview Version:
Date:
DocId:
Status:
01.000a 2019-02-26 ALAS66A_HIO_v01.000a Confidential / Released GENERAL NOTE THE USE OF THE PRODUCT INCLUDING THE SOFTWARE AND DOCUMENTATION (THE "PROD-
UCT") IS SUBJECT TO THE RELEASE NOTE PROVIDED TOGETHER WITH PRODUCT. IN ANY EVENT THE PROVISIONS OF THE RELEASE NOTE SHALL PREVAIL. THIS DOCUMENT CONTAINS INFORMATION ON GEMALTO M2M PRODUCTS. THE SPECIFICATIONS IN THIS DOCUMENT ARE SUBJECT TO CHANGE AT GEMALTO M2M'S DISCRETION. GEMALTO M2M GMBH GRANTS A NON-
EXCLUSIVE RIGHT TO USE THE PRODUCT. THE RECIPIENT SHALL NOT TRANSFER, COPY, MODIFY, TRANSLATE, REVERSE ENGINEER, CREATE DERIVATIVE WORKS; DISASSEMBLE OR DECOMPILE THE PRODUCT OR OTHERWISE USE THE PRODUCT EXCEPT AS SPECIFICALLY AUTHORIZED. THE PRODUCT AND THIS DOCUMENT ARE PROVIDED ON AN "AS IS" BASIS ONLY AND MAY CONTAIN DEFICIENCIES OR INADEQUACIES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, GEMALTO M2M GMBH DISCLAIMS ALL WARRANTIES AND LIABILITIES. THE RECIPIENT UNDERTAKES FOR AN UNLIMITED PERIOD OF TIME TO OBSERVE SECRECY REGARDING ANY INFORMATION AND DATA PROVIDED TO HIM IN THE CONTEXT OF THE DELIV-
ERY OF THE PRODUCT. THIS GENERAL NOTE SHALL BE GOVERNED AND CONSTRUED ACCORDING TO GERMAN LAW. Copyright Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its con-
tents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. Copyright 2019, Gemalto M2M GmbH, a Gemalto Company Trademark Notice Gemalto, the Gemalto logo, are trademarks and service marks of Gemalto and are registered in certain countries. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corpora-
tion in the United States and/or other countries. All other registered trademarks or trademarks mentioned in this document are property of their respective owners. ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview Contents 51 Page 3 of 51 Contents 1 Introduction ................................................................................................................. 6 Product Variants ................................................................................................ 6 1.1 Key Features at a Glance .................................................................................. 7 1.2 1.2.1 Supported Frequency Bands .............................................................. 11 1.2.2 Supported CA Configurations ............................................................. 12 System Overview ............................................................................................. 16 1.3 2 3 4 5 6 7 Interface Characteristics .......................................................................................... 17 2.1 Application Interface ........................................................................................ 17 2.1.1 USB Interface...................................................................................... 17 Serial Interface ASC0 ......................................................................... 18 2.1.2 2.1.3 Serial Interface ASC1 ......................................................................... 19 I2C Interface ........................................................................................ 20 2.1.4 2.1.5 UICC/SIM/USIM Interface................................................................... 21 2.1.6 Digital Audio Interface......................................................................... 23 Inter IC Sound Interface (I2S).............................................. 23 2.1.6.1 2.1.7 Analog-to-Digital Converter (ADC)...................................................... 23 2.1.8 GPIO Interface .................................................................................... 23 2.1.9 eMMC Interface .................................................................................. 23 GSM/UMTS/LTE Antenna Interface................................................................. 24 2.2.1 Antenna Installation ............................................................................ 25 2.2.2 RF Line Routing Design...................................................................... 26 2.2.2.1 Line Arrangement Instructions ............................................ 26 2.2.2.2 Routing Examples ............................................................... 28 GNSS Antenna Interface ................................................................................. 29 Sample Application .......................................................................................... 31 2.3 2.4 2.2 GNSS Interface.......................................................................................................... 33 Mechanical Dimensions and Mounting................................................................... 34 4.1 Mechanical Dimensions of ALAS66A .............................................................. 34 Regulatory and Type Approval Information ........................................................... 36 Directives and Standards................................................................................. 36 5.1 SAR requirements specific to portable mobiles ............................................... 39 5.2 Reference Equipment for Type Approval......................................................... 40 5.3 5.4 Compliance with FCC and ISED Rules and Regulations................................. 41 Document Information.............................................................................................. 44 6.1 Revision History ............................................................................................... 44 Related Documents ......................................................................................... 45 6.2 Terms and Abbreviations ................................................................................. 45 6.3 6.4 Safety Precaution Notes .................................................................................. 48 Appendix.................................................................................................................... 49 7.1 List of Parts and Accessories........................................................................... 49 ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview Tables 51 Page 4 of 51 Tables Table 1:
Table 2:
Table 3:
Table 4:
Table 5:
Table 6:
Table 7:
Table 8:
Table 9:
Table 10:
Table 11:
Table 12:
Table 13:
Table 14:
Table 15:
Supported frequency bands for each ALAS66A variant................................. 11 Supported CA configurations ......................................................................... 12 Signals of the SIM interface (SMT application interface) ............................... 21 Return loss in the active band........................................................................ 24 Directives ....................................................................................................... 36 Standards of North American type approval .................................................. 36 Standards of European type approval............................................................ 36 Requirements of quality ................................................................................. 37 Standards of the Ministry of Information Industry of the Peoples Republic of China............................................................................ 37 Toxic or hazardous substances or elements with defined concentration limits............................................................................................................... 38 Antenna gain limits for FCC for ALAS66A-W................................................. 41 Antenna gain limits for FCC and ISED for ALAS66A-US............................... 41 List of parts and accessories.......................................................................... 49 Molex sales contacts (subject to change) ...................................................... 50 Hirose sales contacts (subject to change) ..................................................... 50 ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview Figures 51 Page 5 of 51 Figures Figure 1:
Figure 2:
Figure 3:
Figure 4:
Figure 5:
Figure 6:
Figure 7:
Figure 8:
Figure 9:
Figure 10:
Figure 11:
Figure 12:
Figure 13:
Figure 14:
Figure 15:
Figure 16:
ALAS66A system overview............................................................................ 16 USB circuit ..................................................................................................... 17 Serial interface ASC0..................................................................................... 18 Serial interface ASC1..................................................................................... 19 I2C interface connected to VEXT ................................................................... 20 First UICC/SIM/USIM interface ...................................................................... 22 Embedded Stripline line arrangement............................................................ 26 Micro-Stripline line arrangement samples...................................................... 27 Routing to applications RF connector ........................................................... 28 Routing detail ................................................................................................. 28 Supply voltage for active GNSS antenna....................................................... 29 ESD protection for passive GNSS antenna ................................................... 30 ALAS66A sample application......................................................................... 32 ALAS66A top and bottom view ................................................................... 34 Dimensions of ALAS66A (all dimensions in mm)........................................... 35 Reference equipment for type approval......................................................... 40 ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 1 Introduction 16 1 Introduction Page 6 of 51 This document1 describes the hardware of the Cinterion ALAS66A products listed in Section 1.1. It helps you quickly retrieve interface specifications, electrical and mechanical details and information on the requirements to be considered for integrating further components. 1.1 Product Variants This document applies to the following Gemalto M2M modules:
Cinterion ALAS66A-W Cinterion ALAS66A-CN Cinterion ALAS66A-E Cinterion ALAS66A-US Cinterion ALAS66A-J Cinterion ALAS66A-K Where necessary a note is made to differentiate between the various product variants and re-
leases. 1. The document is effective only if listed in the appropriate Release Notes as part of the technical docu-
mentation delivered with your Gemalto M2M product. ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 1.2 Key Features at a Glance 16 1.2 Key Features at a Glance Page 7 of 51 Feature General Frequency bands Implementation Note: Not all of the frequency bands (and 3GPP technologies) mentioned throughout this document are supported by every ALAS66A products vari-
ant. Please refer to Section 1.2.1 for an overview of the frequency bands supported by each ALAS66A product variant. GSM class Small MS Output power
(according to Release 99) GSM/GPRS/UMTS:
Class 4 (+33dBm 2dB) for EGSM850 and EGSM900 Class 1 (+30dBm 2dB) for GSM1800 and GSM1900 Class E2 (+27dBm 3dB) for GSM 850 8-PSK and GSM 900 8-PSK Class E2 (+26dBm +3 /-4dB) for GSM 1800 8-PSK and GSM 1900 8-PSK Class 3 (+24dBm +1/-3dB) for all supported WCDMA FDD bands Output power
(according to Release 4) TD-SCDMA:
Class 2 (+24dBm +1/-3dB) for TD-SCDMA 1900, TD-SCDMA Bd39 and TD-SCDMA 2000, TD-SCDMA Bd34 Output power
(according to Release 8) LTE (FDD):
Class 3 (+23dBm +-2dB) for all supported LTE FDD bands LTE (TDD):
Class 3 (+23dBm +-2dB) for all supported LTE TDD bands Power supply Operating temperature
(board temperature) Physical RoHS 3.3V < VBATT+ < 4.2V Normal operation: -30C to +85C Restricted operation: -40C to +95C Dimensions: 48mm x 36mm x 3mm Weight: approx. 10.5g All hardware components fully compliant with EU RoHS Directive ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 1.2 Key Features at a Glance 16 Page 8 of 51 Feature LTE features LTE Advanced up to 3GPP Release 11 LTE Advanced Pro up to 3GPP Release 12, 13 Implementation Downlink carrier aggregation (CA) to increase bandwidth, and thereby increase bitrate:
Maximum aggregated bandwidth: 80MHz Maximum number of component carriers: 3 Inter-band FDD, TDD Intra-band FDD, TDD, contiguous, non-contiguous Supported inter- and intra-band CA configurations: See Section 1.2.2. If 4x4 MIMO is supported by the mobile network:
Downlink:
Up to 1Gbps CAT 16 with 4x4 MIMO 2 CA DL + 4(2)x2 MIMO 1 CA DL or up to 800Mbps CAT 15 with 4x4 MIMO 2 CA DL Uplink:
Up to 150Mbps CAT 13 with 2 CA UL If 4(2)x2 MIMO is supported by the mobile network:
Downlink:
Up to 800Mbps CAT 15 with 4 CA DL Uplink:
Up to 150Mbps CAT 13 with 2 CA UL HSPA features 3GPP Release 8 UE CAT. 14, 24 DC-HSPA+ DL 42Mbps HSUPA UL 5.76Mbps Compressed mode (CM) supported according to 3GPP TS25.212 UMTS features 3GPP Release 8 TD-SCDMA features 3GPP Release 4 GSM / GPRS / EGPRS features Data transfer PS data rate 384 kbps DL / 384 kbps UL 2.8 Mbps DL / 2.2Mbps UL EDGE E2 power class for 8 PSK GPRS:
Multislot Class 12 Mobile Station Class B Coding Scheme 1 4 EGPRS:
Multislot Class 12 Downlink coding schemes CS 1-4, MCS 1-9 Uplink coding schemes CS 1-4, MCS 1-9 NACC, extended UL TBF Mobile Station Class B Point-to-point MT and MO, Cell broadcast, Text and PDU mode SRB loopback and test mode B 8-bit, 11-bit RACH 1 phase/2 phase access procedures Link adaptation and IR SMS ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 1.2 Key Features at a Glance 16 Page 9 of 51 Feature Software Embedded Linux platform Embedded Linux with API (ARC, RIL). Implementation SIM Application Toolkit Firmware update GNSS Features Protocol Modes General Interfaces Module interface Antenna USB Serial interface Memory space available for Linux applications is 4GB in the flash file sys-
tem, and 2GB RAM. SAT Release 99, letter classes b, c, e with BIP and RunAT support Linux controlled firmware update. NMEA Standalone GNSS (GPS, GLONASS, Beidou, Galileo) Integrated gpsOne 9HT support (GPS, GLONASS, Beidou, Galileo) QZSS and SBAS support Power saving modes DC feed bridge and control of power supply for active antenna via GPIO Surface mount device with solderable connection pads (SMT application interface). Land grid array (LGA) technology ensures high solder joint reliability and provides the possibility to use an optional module mounting socket. For more information on how to integrate SMT modules see also [2]. This application note comprises chapters on module mounting and application layout issues as well as on additional SMT application development equip-
ment. 50. 2 GSM/UMTS/LTE main antennas, 2 LTE Diversity/MIMO antennas,
(active/passive) GNSS antenna USB 2.0 High Speed (480Mbit/s) device interface or USB 3.0 Super Speed (5Gbit/s) device interface for debugging purposes Linux controlled:
ASC0:
4-wire (8-wire prepared) (plus GND line) interface unbalanced, asyn-
chronous Fixed baud rates from 115,200 to 921,600bps Supports RTS0/CTS0 hardware flow control 4-wire, unbalanced asynchronous interface Fixed baud rates: 115,200bps to 921,60bps Supports RTS1/CTS1 hardware flow control ASC1:
ASC2:
2-wire, unbalanced asynchronous interface at GPIO9 (RXD2) and GPIO10 (TXD2) lines used for debugging purposes (optional) UICC interface I2C interfaces Audio Power on/off, Reset Power on/off Emergency-off Supported chip cards: UICC/SIM/USIM 2.85V, 1.8V Linux controlled:
2 I2C interfaces 1 digital interface (I2S) Switch-on by hardware signal IGT Automatic switch-off in case of critical temperature or voltage conditions Emergency-off by hardware signal EMERG_OFF ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 1.2 Key Features at a Glance 16 Page 10 of 51 Feature Special Features Antenna GPIO External antenna switch Implementation SAIC (Single Antenna Interference Cancellation) / DARP (Downlink Advanced Receiver Performance) Rx Diversity (receiver type 3i - 64-QAM) / MIMO HORxD (Higher Order Receive Diversity) with up to 4 antennas Linux controlled:
18 I/O pins of the application interface programmable as GPIO. 3 GPIOs permanently configured as optional external antenna switch inter-
face. Emergency call handling EU eCall 3GPP Release 10 compliant (modem and GNSS) ADC inputs JTAG eMMC PCIe Evaluation kit Evaluation module ERA compliant (modem and GNSS) Linux controlled:
Analog-to-Digital Converter with unbalanced analog inputs for example for
(external) antenna diagnosis JTAG interface for debug purposes Linux controlled:
Embedded Multi-Media Card interface Linux controlled:
PCIe interface ALAS66A module soldered onto a dedicated PCB. ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 1.2 Key Features at a Glance 16 1.2.1 Supported Frequency Bands Page 11 of 51 The following table lists the supported frequency bands for each of the ALAS66A product vari-
ants mentioned in Section 1.1. x x x x x x x x x x
-E x x
-W
-CN x x x x x x x x Table 1: Supported frequency bands for each ALAS66A variant Band GSM/GPRS/EDGE 850MHz 900MHz 1800MHz 1900MHz UMTS/HSPA Bd.I (2100MHz) Bd.II (1900MHz) Bd.III (1800MHz) Bd.IV (1700MHz) Bd.V (850MHz) Bd.VI (850MHz) Bd.VIII (900MHz) Bd.XIX (850MHz) TD-SCDMA Bd.34 (2000MHz) Bd.39 (1900MHz) LTE-FDD Bd.1 (2100MHz) Bd.2 (1900MHz) Bd.3 (1800MHz) Bd.4 (1700MHz) Bd.5 (850MHz) Bd.7 (2600MHz) Bd.8 (900MHz) Bd.12 (700MHz) Bd.13 (700MHz) Bd.18 (850MHz) Bd.19 (850MHz) Bd.20 (800MHz) Bd.26 (850MHz) Bd.28 (700MHz) x x x x x x x x x x x x x x x x x x x x x x
-US
-J
-K x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 1.2 Key Features at a Glance 16 Page 12 of 51
-E
-W
-CN Table 1: Supported frequency bands for each ALAS66A variant Band Bd.29 (700MHz)
<supplementary downlink>
Bd.30 (2300MHz)1
<supplementary downlink only acc. FCC regulation>
Bd.32 (1500MHz)
<supplementary downlink>
Bd.66 (1700MHz)2 LTE-TDD Bd.34 (2000MHz) Bd.38 (2600MHz) Bd.39 (1900MHz) Bd.40 (2300MHz) Bd.41 (2600MHz)3 x x x x x x x x x x x x x
-US
-J
-K x x x x x x x x x x x x x x x 1. Band 30 support is disabled by means of software due to AT&T advice. 2. With the Band 66 support, the frequency ranges 1755-1780 MHz and 2155-2180 MHz derived from pair-
ing the 1710-1780 and 2110-2180 MHz frequency bands are compliant with 27.5(h) and 27.75. 3. Note: Out of the 3GPP specified frequency range for LTE Band 41, only that part which is used in China and Japan (2545MHz to 2655MHz) is supported by ALAS66A. Therefore, support for Band 41 is dis-
abled by means of software in ALAS66A-W and ALAS66A-K variants. Supported CA Configurations 1.2.2 The following table lists the supported CA configurations for each of the ALAS66A product vari-
ants mentioned in Section 1.1. Table 2: Supported CA configurations Downlink CA Uplink CA Intra-band continuous CA_1C CA_2C CA_3C CA_5B CA_7B CA_7C CA_8B CA_12B CA_38C CA_40C CA_40D
-
-
CA_3C
-
-
CA_7C
-
-
CA_38C CA_40C
-
Bandwidth combination set Product variants
(ALAS66A-...) 0,1 0 0 0,1 0 0, 1, 2 0 0 0 0, 1 0,1 E, W, CN, J, K US E, W, CN, J, K US, W, J, K E, US, W, CN, J, K E, US, W, CN, J, K E, W, CN, J, K US E, W, CN, J, K W, CN, J, K W, CN, J, K ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 1.2 Key Features at a Glance 16 Page 13 of 51 Table 2: Supported CA configurations Downlink CA Uplink CA
-
-
-
CA_41C CA_41C
-
-
CA_41C CA_41D CA_66B CA_66C Intra-band non-continuous CA_2A-2A CA_4A-4A CA_66A-66A Inter-band (two bands) CA_1A-3A CA_1A-3C CA_1A-5A CA_1A-7A CA_1A-8A CA_1A-18A CA_1A-19A CA_1A-20A CA_1A-26A CA_1A-28A CA_2A-2A-4A CA_2A-2A-4A-4A CA_2A-2A-5A CA_2A-2A-12A CA_2A-2A-13A CA_2A-2A-66A CA_2A-4A CA_2A-4A-4A CA_2A-5A CA_2A-12A CA_2A-12B CA_2A-13A CA_2A-28A CA_2A-29A CA_2A-66A CA_2A-66A-66A CA_2C-5A CA_2C-12A CA_2C-29A CA_3A-3A-8A CA_3A-5A CA_3A-7A CA_3A-7B
-
CA_3C CA_1A-5A
-
CA_1A-8A CA_1A-18A
-
-
CA_1A-26A CA_1A-28A
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
CA_7C CA_3A-8A
-
CA_3A-20A Bandwidth combination set 0,1,2,3 0 0 0 Product variants
(ALAS66A-...) CN, J CN, J US US 0 0,1 0 0,1 0 0, 1 0 0, 1, 2 0, 1 0 0 0, 1 0, 1 0 0 0 0 0 0 0, 1, 2 0 0, 1 0, 1, 2 0 0, 1 0 0, 1, 2 0,1,2 0 0 0 0 0, 1 0, 1, 2, 3,4 0, 1 0 US US US E, W, CN, J, K E, W, CN, J, K W E, W, CN, J, K E, W, CN, J, K W, J, K W, J, K E, W, J, K W, J, K E, W, J, K US US US US US US US US US US US US US US US US US US US E, W, CN, J, K W, J, K E, W, CN, J, K E, W, CN, J, K ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 1.2 Key Features at a Glance 16 Page 14 of 51 Table 2: Supported CA configurations Downlink CA Uplink CA CA_3A-7C CA_3A-8A CA_3A-19A CA_3A-20A CA_3A-26A CA_3A-28A CA_3C-5A CA_3C-7A CA_3C-7C CA_3C-8A CA_3C-20A CA_3C-28A CA_4A-4A-5A CA_4A-4A-7A CA_4A-4A-12A CA_4A-4A-13A CA_4A-5A CA_4A-7A CA_4A-12A CA_4A-12B CA_4A-13A CA_4A-28A CA_4A-29A CA_5A-7A CA_5A-12A CA_5A-66A CA_5A-66A-66A CA_7A-8A CA_7A-12A CA_7A-20A CA_7A-28A CA_7B-28A CA_7C-28A CA_8A-20A CA_12A-66A CA_12A-66A-66A CA_13A-66A CA_13A-66A-66A CA_18A-28A CA_20A-32A CA_39A-41A CA_39A-41C CA_39C-41A
-
-
-
CA_3C
-
CA_3A-20A
-
-
-
CA_3C-8A, CA_3C
-
-
-
-
-
-
-
-
-
-
-
-
-
CA_5A-7A
-
-
-
-
-
CA_7A-20A
-
-
CA_7C
-
-
-
-
-
-
-
-
CA_41C CA_39C Bandwidth combination set 0, 1 0, 1, 2, 3 0 0, 1 0, 1 0,1 0 0 0,1 0 0 0 0 0, 1 0 0 0, 1 0, 1 0,1,2,3,4,5 0 0, 1 0 0, 1, 2 0, 1 0 0 0 0, 1,2 0 0, 1 0, 1 0 0 0, 1 0,1,2,3,4,5 0 0 0 0 0,1 0 0 0 Product variants
(ALAS66A-...) E, W, CN, J, K E, W, CN, J, K W, J, K E, W, J, K W, J, K E, W, J, K W, J, K E, W, CN, J, K E, W, J, K W, J, K E, W, J, K E, W, J, K US US US US US US US US US US US US, W, J, K US US US E, W, CN, J, K US E, W, J, K E, US, W, J, K E, US, W, J, K E, US, W, J, K E, W, J, K US US US US W, J, K E, W, J, K CN CN CN ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 1.2 Key Features at a Glance 16 Page 15 of 51 Table 2: Supported CA configurations Downlink CA Uplink CA Bandwidth combination set Product variants
(ALAS66A-...) Inter-band (three bands) CA_1A-3A-5A CA_1A-3A-8A CA_1A-3A-19A CA_1A-3A-20A CA_1A-3A-26A CA_1A-3A-28A CA_1A-5A-7A CA_1A-7A-8A CA_1A-7A-20A CA_1A-7A-28A CA_1A-18A-28A CA_1A-19A-28A CA_2A-2A-4A-12A CA_2A-2A-12A-66A CA_2A-4A-4A-12A CA_2A-4A-5A CA_2A-4A-12A CA_2A-4A-13A CA_2A-4A-29A CA_2A-5A-66A CA_2A-12A-66A CA_2A-12A-66A-66A CA_2A-13A-66A CA_3A-7A-8A CA_3A-7A-28A CA_3A-7C-28A CA_4A-7A-12A 0 0 0 0 CA_1A-5A, CA_3A-5A 0, 1 CA_1A-8A, CA_3A-8A 0,1,2,3
-
CA_3A-20A
-
-
CA_1A-5A, CA_5A-7A 0, 1
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
CA_3A-8A
-
-
-
0 0,1 0,1,2 0, 1 0 0 0 0 0 0 0 0 0 0 0 0 0, 1,2 0 0 0, 1 E, W, J, K E, W, CN, J, K W, J, K E, W, J, K W, J, K E, W, J, K E, W, J, K E, W, CN, J, K E, W, J, K E, W, J, K W, J, K W, J, K US US US US US US US US US US US E, W, CN, J, K E, W, J, K E, W, J, K US Note: Carrier aggregation (CA) is planned, and will be supported in a future version. ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 1.3 System Overview 16 1.3 System Overview Page 16 of 51 GNSS TRX1 TRX2 RX3 RX4 Application Power Supply Antenna-
diagnostic External Antenna Switch (optional) Antenna-
diagnostic GNSS GSM/UMTS/LTE 3 x ANT_SW GPIO 4 x ADC ALAS66A USB 2.0/3.0 PCIe ASC0 ASC1 I2C Digital Audio GPIO eMMC IGT EMERG_OFF Digital Audio I2C SIM Card USIM Power Supply B S U e I C P e c a f r e t n I l a i r e S e c a f r e t n I l a i r e S e c a f r e t n I C M M e C 2 I S 2 I I O P G Application Interfaces S 2 I C 2 I T X E V D N I _ R W P Codec Power Supply Application Figure 1: ALAS66A system overview ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 2 Interface Characteristics 33 2 Interface Characteristics Page 17 of 51 ALAS66A is equipped with an SMT application interface that connects to the external applica-
tion. The SMT application interface incorporates the various application interfaces as well as the RF antenna interface. 2.1 Application Interface 2.1.1 USB Interface ALAS66A supports a USB 3.0 Super Speed (5Gbps) device interface, and alternatively a USB 2.0 device interface that is High Speed compatible. The USB interface is primarily intended for use as debugging interface. The USB host is responsible for supplying the VUSB_IN line. This line is for voltage detection only. The USB part (driver and transceiver) is supplied by means of BATT+. This is because ALAS66A is designed as a self-powered device compliant with the Universal Serial Bus Spec-
ification Revision 3.01. Module USB parta) 2.0 USB_HS _PHY USB 2.0 Controller 2.0 USB 3.0 Controller 3.0 USB_SS _PHY VBUS SMT lin. reg. 100nF 100nF Detection only 1F BATT+
GND USB_DPc) USB_DNc) USB_SSRX_Nc) USB_SSRX_Pc) USB_SSTX_Nc) USB_SSTX_Pc) VUSB_INb) a) All serial (including R S) and pull-up resistors for data lines are implemented . b) Since VUSB_IN is used for detection only it is recommended not to add any further blocking capacitors on the VUSB_IN line. c) If the USB interface is operated with super or high speeds, it is recommended to take special care routing the data lines. Application layout should implement a differential impedance of 90 ohms for proper signal integrity . To properly connect the module's USB interface to the external application, a USB 3.0 or 2.0 compatible connector and cable or hardware design is required. Furthermore, the USB driver distributed with ALAS66A needs to be installed. Figure 2: USB circuit 1. The specification is ready for download on http://www.usb.org/developers/docs/
ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 2.1 Application Interface 33 2.1.2 Serial Interface ASC0 Page 18 of 51 ALAS66A offers a 4-wire (8-wire prepared) (plus GND) unbalanced, asynchronous interface ASC0 conforming to ITU-T V.24 protocol DCE signaling. The electrical characteristics do not comply with ITU-T V.28. The significant levels are 0V (for low data bit or active state) and 1.8V
(for high data bit or inactive state). ALAS66A is designed for use as a DCE. Based on the conventions for DCE-DTE connections it communicates with the customer application (DTE) using the following signals:
Port TXD @ application sends data to the modules TXD0 signal line Port RXD @ application receives data from the modules RXD0 signal line Figure 3: Serial interface ASC0 Features:
Includes the data lines TXD0 and RXD0, the status lines RTS0 and CTS0. The modem con-
trol lines DTR0, DSR0, DCD0 and RING0 are not yet implemented. The RING0 signal serves to indicate incoming calls and other types of URCs (Unsolicited Result Code). It can also be used to send pulses to the host application, for example to wake up the application from power saving state. Not yet implemented. Configured for 8 data bits, no parity and 1 stop bit. ASC0 can be operated at fixed bit rates from 115,200 to 921,600bps. Supports RTS0/CTS0 hardware flow control. Note: If the ASC0 serial interface is the applications only interface, it is suggested to connect test points on the USB signal lines as a potential tracing possibility. ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 2.1 Application Interface 33 2.1.3 Serial Interface ASC1 Page 19 of 51 Four ALAS66A lines can be configured as ASC1 interface signals to provide a 4-wire unbal-
anced, asynchronous interface ASC1 conforming to ITU-T V.24 protocol DCE signaling. The electrical characteristics do not comply with ITU-T V.28. The significant levels are 0V (for low data bit or active state) and 1.8V (for high data bit or inactive state). ALAS66A is designed for use as a DCE. Based on the conventions for DCE-DTE connections it communicates with the customer application (DTE) using the following signals:
Port TXD @ application sends data to modules TXD1 signal line Port RXD @ application receives data from the modules RXD1 signal line Figure 4: Serial interface ASC1 Features Includes only the data lines TXD1 and RXD1 plus RTS1 and CTS1 for hardware hand-
shake. On ASC1 no RING line is available. Configured for 8 data bits, no parity and 1 or 2 stop bits. ASC1 can be operated at fixed bit rates from 115,200 bps to 921,600 bps. Supports RTS1/CTS1 hardware flow. ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 2.1 Application Interface 33 Page 20 of 51 I2C Interface 2.1.4 ALAS66A provides two I2C interfaces. I2C is a serial, 8-bit oriented data transfer bus for bit rates up to 400kbps in Fast mode. It consists of two lines, the serial data line I2CDAT and the serial clock line I2CCLK. The module acts as a single master device, e.g. the clock I2CCLK is driven by the module. I2CDAT is a bi-directional line. Each device connected to the bus is software addressable by a unique 7-bit address, and simple master/slave relationships exist at all times. The module operates as master-transmitter or as master-receiver. The customer application transmits or receives data only on request of the module. The applications I2C interface can be powered via the VEXT line of ALAS66A. If connected to the VEXT line, the I2C interface will properly shut down when the module enters the Power Down mode. In the application I2CDATx and I2CCLKx lines need to be connected to a positive supply volt-
age (e.g., VEXT) via a pull-up resistor. Module VEXT I2CCLK I2CDAT GND Application p u l l u p R p u l l u p R I2CCLK I2CDAT GND Figure 5: I2C interface connected to VEXT Note: Good care should be taken when creating the PCB layout of the host application: The traces of I2CCLK and I2CDAT should be equal in length and as short as possible. ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 2.1 Application Interface 33 2.1.5 UICC/SIM/USIM Interface Page 21 of 51 ALAS66A has a UICC/SIM/USIM interface compatible with the 3GPP 31.102 and ETSI 102 221. It is wired to the host interface in order to be connected to an external SIM card holder. Five pads on the SMT application interface are reserved for the SIM interface. The UICC/SIM/USIM interface supports 2.85V and 1.8V SIM cards. The CCIN signal serves to detect whether a tray (with SIM card) is present in the card holder. Using the CCIN signal is mandatory for compliance with the GSM 11.11 recommendation if the mechanical design of the host application allows the user to remove the SIM card during oper-
ation. To take advantage of this feature, an appropriate SIM card detect switch is required on the card holder. For example, this is true for the model supplied by Molex, which has been test-
ed to operate with ALAS66A and is part of the Gemalto M2M reference equipment submitted for type approval. See Chapter 7 for Molex ordering numbers. Table 3: Signals of the SIM interface (SMT application interface) Signal GND Description Ground connection for SIM interfaces. Optionally a separate SIM ground line may be used to improve EMC. Chipcard clock line for SIM interface. CCCLK CCVCC SIM supply voltage line for SIM interface. CCIO CCRST CCIN Serial data line for SIM interface, input and output. Chipcard reset line SIM interface. Input on the baseband processor for detecting a SIM card tray in the holder. If the SIM is removed during operation the SIM interface is shut down immediately to prevent destruc-
tion of the SIM. The CCIN signal is active low. The CCIN signal is mandatory for applications that allow the user to remove the SIM card during operation. The CCIN signal is solely intended for use with a SIM card. It must not be used for any other purposes. Failure to comply with this requirement may invalidate the type approval of ALAS66A. Note: No guarantee can be given, nor any liability accepted, if loss of data is encountered after removing the SIM card during operation. Also, no guarantee can be given for properly initializ-
ing any SIM card that the user inserts after having removed the SIM card during operation. In this case, the application must restart ALAS66A. ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 2.1 Application Interface 33 Page 22 of 51 open: Card removed closed: Card inserted 1n SIM /
UICC CCIN CCRST CCCLK GND CCIO e c a f r e t n i n o i t a c i l p p a T M S Module CCVCC 220n Figure 6: First UICC/SIM/USIM interface The total cable length between the SMT application interface pads on ALAS66A and the pads of the external SIM card holder must not exceed 100mm in order to meet the specifications of 3GPP TS 51.010-1 and to satisfy the requirements of EMC compliance. To avoid possible cross-talk from the CCCLK signal to the CCIO signal be careful that both lines are not placed closely next to each other. A useful approach is using the GND line to shield the CCIO line from the CCCLK line. ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 2.1 Application Interface 33 2.1.6 Digital Audio Interface Page 23 of 51 ALAS66A supports one digital audio interface that can be employed as inter IC sound (I2S) in-
terface. Inter IC Sound Interface (I2S) 2.1.6.1 The I2S Interface is a standardized bidirectional I2S ("Inter-IC Sound Interface") based digital audio interface for transmission of mono voice signals for telephony services. The I2S properties and capabilities comply with the requirements layed out in the Phillips I2S Bus Specifications, revised June 5, 1996. 2.1.7 Analog-to-Digital Converter (ADC) ALAS66A provides four unbalanced ADC input lines: ADC[1-2...4-5]_IN. They can be used to measure four independent, externally connected DC voltages in the range of 0.1V to 1.7V. 2.1.8 GPIO Interface ALAS66A has 18 GPIOs for external hardware devices. Each GPIO can be configured for use as input or output. eMMC Interface 2.1.9 ALAS66A has an eMMC interface that can be used for test purposes, e.g., to write crash dumps from the modules FFS to eMMC. ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 2.2 GSM/UMTS/LTE Antenna Interface 33 2.2 GSM/UMTS/LTE Antenna Interface Page 24 of 51 The ALAS66A GSM/UMTS/LTE antenna interface comprises two GSM/UMTS/LTE main an-
tennas as well as two UMTS/LTE Rx diversity/MIMO antennas to improve signal reliability and quality1. The interface has an impedance of 50. ALAS66A is capable of sustaining a total mis-
match at the antenna interface without any damage, even when transmitting at maximum RF power. The external antennas must be matched properly to achieve best performance regarding radi-
ated power, modulation accuracy and harmonic suppression. Matching networks are not in-
cluded on the ALAS66A PCB and should be placed in the host application, if the antenna does not have an impedance of 50. Regarding the return loss ALAS66A provides the following values in the active band:
Table 4: Return loss in the active band State of module Receive Transmit Return loss of module
> 8dB Undefined mismatch Recommended return loss of application
> 12dB
> 12dB 1. By delivery default the UMTS/LTE Rx diversity/MIMO antennas are configured as available for the mod-
ule since its usage is mandatory for LTE. Please refer to [1] for details on how to configure antenna set-
tings. ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 2.2 GSM/UMTS/LTE Antenna Interface 33 2.2.1 Antenna Installation Page 25 of 51 The antennas are connected by soldering the antenna pads (ANT_TRX1, ANT_TRX2, ANT_RX3, ANT_RX4; ANT_GNSS) and their neighboring ground pads directly to the applica-
tions PCB. The distance between the antenna pads and their neighboring GND pads has been optimized for best possible impedance. To prevent mismatch, special attention should be paid to these pads on the application PCB. The wiring of the antenna connection, starting from the antenna pad to the applications anten-
na must result in a 50 line impedance. Line width and distance to the GND plane need to be optimized with regard to the PCBs layer stack. To prevent receiver desensitization due to interferences generated by fast transients like high speed clocks on the external application PCB, it is recommended to realize the antenna con-
nection line using embedded Stripline rather than Micro-Stripline technology. Please see Sec-
tion 2.2.2 for instructions of how to design the antenna connection in order to achieve the required 50 line impedance. For type approval purposes(i.e., FCC KDB 996369 related to modular approval requirements), an external application must connect the RF signal in one of the following ways:
Via 50 coaxial antenna connector (common connectors are U-FL or SMA) placed as close as possible to the module's antenna pad. By soldering the antenna to the antenna connection line on the applications PCB (without the use of any connector) as close as possible to the modules antenna pad. By routing the application PCBs antenna to the modules antenna pad in the shortest pos-
sible way. ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 2.2 GSM/UMTS/LTE Antenna Interface 33 2.2.2 RF Line Routing Design Page 26 of 51 Line Arrangement Instructions 2.2.2.1 Several dedicated tools are available to calculate line arrangements for specific applications and PCB materials - for example from http://www.polarinstruments.com/ (commercial software) or from http://web.awrcorp.com/Usa/Products/Optional-Products/TX-Line/ (free software). Embedded Stripline This below figure shows line arrangement examples for embedded stripline. Figure 7: Embedded Stripline line arrangement ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 2.2 GSM/UMTS/LTE Antenna Interface 33 Page 27 of 51 Micro-Stripline This section gives two line arrangement examples for micro-stripline. Figure 8: Micro-Stripline line arrangement samples ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 2.2 GSM/UMTS/LTE Antenna Interface 33 Page 28 of 51 Routing Examples 2.2.2.2 Interface to RF Connector Figure 9 and Figure 10 show a sample connection of a modules antenna pad at the bottom layer of the module PCB with an application PCBs coaxial antenna connector. Line impedance depends on line width, but also on other PCB characteristics like dielectric, height and layer gap. The sample stripline width of 0.50mm/0.75mm and the spaces of 0.35mm/0.3mm are only recommended for an application with a PCB layer stack resembling the one of the ALAS66A evaluation board, and with layer 2 as well as layer 3 cut clear. For different layer stacks the stripline width will have to follow stripline routing rules, avoiding 90 degree corners and using the shortest distance to the PCBs coaxial antenna connector. G N D e.g. ANT_ TRX1 G N D G N D G N D Stripline (50 ohms) on top layer of evaluation board from antenna pad to module edge Width = 0.50 mm Ground connection Edge of module PCB 50 ohms microstrip line E.g., U.FL antenna connector Figure 9: Routing to applications RF connector RF track under module:
Line/space: 500/350m Module RF track outside module:
Line/space: 750/300m Figure 10: Routing detail ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 2.3 GNSS Antenna Interface 33 2.3 GNSS Antenna Interface Page 29 of 51 In addition to the RF antenna interface ALAS66A also has a GNSS antenna interface. The GNSS pads shape is the same as for the RF antenna interface (see Section 2.2.1). It is possible to connect active or passive GNSS antennas. In either case they must have 50 impedance. The simultaneous operation of GSM/UMTS/LTE and GNSS is implemented. ALAS66A provides the signal GNSS_EN to enable an active GNSS antenna power supply. Fig-
ure 11 shows the flexibility in realizing the power supply for an active GNSS antenna by giving a sample circuit realizing the supply voltage for an active GNSS antenna. Module Application:
GNSS Receiver Antenna Matching ANT_GNSS RF DC DC LNA Active GNSS Antenna ANT_GNSS_DC BATT+
VGNSS
(3.2V) GNSS_EN IN OUT LDO EN LP3985IM5-3.2 ADCx_IN Rs 1R0 Rv 100 Is Io
-
+
Current Sensor FAN4010 Si1023X_1 10k 1u ESD Protection Si1023X_2 10k Ug Io Rg 3k3 Figure 11: Supply voltage for active GNSS antenna ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 2.3 GNSS Antenna Interface 33 Page 30 of 51 Figure 12 shows a sample circuit realizing ESD protection for a passive GNSS antenna. Con-
necting the input ANT_GNSS_DC to GND prevents ESD from coupling into the module. Module SMT interface GNSS_EN Not used 100nF ANT_GNSS_DC 10nH ANT_GNSS To GNSS receiver
(Optional) ESD protection 0R Passive GNSS antenna Figure 12: ESD protection for passive GNSS antenna ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 2.4 Sample Application 33 2.4 Sample Application Page 31 of 51 Figure 13 shows a typical example of how to integrate an ALAS66A module with an application. The PWR_IND line is an open collector that needs an external pull-up resistor which connects to the voltage supply VCC C of the microcontroller. Low state of the open collector pulls the PWR_IND signal low and indicates that the ALAS66A module is active, high level notifies the Power Down mode. If the module is in Power Down mode avoid current flowing from any other source into the mod-
ule circuit, for example reverse current from high state external control lines. Therefore, the controlling application must be designed to prevent reverse flow. While developing SMT applications it is strongly recommended to provide test points for certain signals, i.e., lines to and from the module - for debug and/or test purposes. The SMT application should allow for an easy access to these signals. For details on how to implement test points see [2]. The EMC measures are best practice recommendations. In fact, an adequate EMC strategy for an individual application is very much determined by the overall layout and, especially, the po-
sition of components. Some LGA pads are connected to clocks or high speed data streams that might interfere with the modules antenna. The RF receiver would then be blocked at certain frequencies (self in-
terference). The external applications PCB tracks connected to these pads should therefore be well shielded or kept away from the antenna. This applies especially to the USB and UICC/
SIM interfaces. Depending on the micro controller used by an external application ALAS66As digital input and output lines may require level conversion. Disclaimer:
No warranty, either stated or implied, is provided on the sample schematic diagram shown in Figure 13 and the information detailed in this section. As functionality and compliance with na-
tional regulations depend to a great amount on the used electronic components and the indi-
vidual application layout manufacturers are required to ensure adequate design and operating safeguards for their products using ALAS66A modules. ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 2.4 Sample Application 33 Page 32 of 51 47k 47k 100k OE VCCB Level Controller PCM interface lines Serial interface ASC0 VCC C VDD
(1.8V) VCC C VCCA 4 USB 2.0 HS Mode Or Mode USB 3.0 SS 4 8 2 4 Optional low capacitance ESD protection**
SIM 220nF 1nF All SIM components should be close to card holder. Keep SIM wires low capacitive. GSM/UMTS/LTE GSM/UMTS/LTE UMTS/LTE UMTS/LTE GNSS IGT EMERG_OFF PWR_IND VEXT (1.8V) GND ANT_TRX1 GND GND ANT_TRX2 GND GND ANT_RX3 GND GND ANT_RX4 GND GND ANT_GNSS GND Module PCM2_... BATT+
BATT+_RF 2 2 47F Ultra low ESR 4 x 47F Ultra low ESR RXD0, TXD0, ... VUSB_IN USB_DP, USB_DN USB_SS... CCIN CCVCC CCRST CCIO CCCLK GND Rechargeable Lithium battery
+
NTC Figure 13: ALAS66A sample application ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 3 GNSS Interface 33 3 GNSS Interface Page 33 of 51 ALAS66A integrates a GNSS receiver that offers the full performance of GPS/GLONASS tech-
nology. The GNSS receiver is able to continuously track all satellites in view, thus providing ac-
curate satellite position data. The integrated GNSS receiver supports the NMEA protocol via USB or ASC0 interface. NMEA is a combined electrical and data specification for communication between various (marine) electronic devices including GNSS receivers. It has been defined and controlled by the US based National Marine Electronics Association. For more information on the NMEA Standard please refer to http://www.nmea.org. Depending on the receivers knowledge of last position, current time and ephemeris data, the receivers startup time (i.e., TTFF = Time-To-First-Fix) may vary: If the receiver has no knowl-
edge of its last position or time, a startup takes considerably longer than if the receiver has still knowledge of its last position, time and almanac or has still access to valid ephemeris data and the precise time. By default, the GNSS receiver is switched off. It has to be switched on and configured. Dead Reckoning Sync Line:
Dead reckoning solutions are used in (automotive) platforms to determine the (vehicles) loca-
tion even when there is no GNSS signal available (e.g. in tunnels, basement garages or even between high buildings in cities). In addition to dead reckoning related NMEA sentences, ALAS66A provides a dead reckoning synchronization line (DR_SYNC line) to be employed in external dead reckoning applications. DR_SYNC is derived from the GNSS signal clock as 1 pulse per second (1PPS) signal. The DR_SYNC signal is provided as long as synchronized with the GNSS satellite clock, and con-
tinues after GNSS signal loss. ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 4 Mechanical Dimensions and Mounting 35 Page 34 of 51 4 Mechanical Dimensions and Mounting Mechanical Dimensions of ALAS66A 4.1 Figure 14 shows a 3D view1 of ALAS66A and provides an overview of the board's mechanical dimensions2. For further details see Figure 15. Length:
Width:
Height:
48mm 36mm 3mm Top view Bottom view Figure 14: ALAS66A top and bottom view 1. The coloring of the 3D view does not reflect the modules real color. 2. Note: The holes in the shielding (top view) are significantly smaller than the radiated wavelength from the module. Gemalto guarantees that there will be no emissions outside the limits from these. The RF circuitry of the module is fully shielded. ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 4.1 Mechanical Dimensions of ALAS66A 35
Page 35 of 51
Figure 15: Dimensions of ALAS66A (all dimensions in mm) ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 5 Regulatory and Type Approval Information 43 Page 36 of 51 5 5.1 Regulatory and Type Approval Information Directives and Standards ALAS66A has been designed to comply with the directives and standards listed below. It is the responsibility of the application manufacturer to ensure compliance of the final product with all provisions of the applicable directives and standards as well as with the technical spec-
ifications provided in the "ALAS66A Hardware Interface Description".1 Table 5: Directives 2014/53/EU Directive of the European Parliament and of the council of 16 April 2014 on the harmonization of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/
05/EC. 2002/95/EC (RoHS 1) 2011/65/EC (RoHS 2) The product is labeled with the CE conformity mark. Directive of the European Parliament and of the Council of 27 January 2003 (and revised on 8 June 2011) on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) Table 6: Standards of North American type approval1 CFR Title 47 Code of Federal Regulations, Part 22, Part 24, Part 27, and Part 90; US Equipment Authorization FCC Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields Product Safety Certification (Safety requirements) Overview of PCS Type certification review board Mobile Equipment Type Certification and IMEI control PCS Type Certification Review board (PTCRB) Canadian Standard OET Bulletin 65
(Edition 97-01) UL 60 950-1 NAPRD.03 V5.352 RSS132, RSS133, RSS139 1. Standards apply to ALAS66A-W and ALAS66A-US only. 2. ALAS66A-US complies with NAPRD.03 V5.38. Table 7: Standards of European type approval 3GPP TS 51.010-1 ETSI EN 301 511 V12.5.1 GCF-CC V3.701 Digital cellular telecommunications system (Release 7); Mobile Station
(MS) conformance specification;
Global System for Mobile communications (GSM); Mobile Stations (MS) equipment; Harmonized Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU Global Certification Forum - Certification Criteria 1. Manufacturers of applications which can be used in the US shall ensure that their applications have a PTCRB approval. For this purpose they can refer to the PTCRB approval of the respective module. ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 5.1 Directives and Standards 43 Page 37 of 51 Table 7: Standards of European type approval ETSI EN 301 489-01 V2.1.1 Electromagnetic Compatibility (EMC) standard for radio equipment and ser-
vices; Part 1: Common technical requirements; Harmonized Standard cov-
ering the essential requirements of article 3.1(b) of Directive 2014/53/EU and the essential requirements of article 6 of Directive 2014/30/EU Electromagnetic Compatibility (EMC) standard for radio equipment and ser-
vices; Part 19: Specific conditions for Receive Only Mobile Earth Stations
(ROMES) operating in the 1,5 GHz band providing data communications and GNSS receivers operating in the RNSS band (ROGNSS) providing positioning, navigation, and timing data; Harmonized Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU Electromagnetic Compatibility (EMC) standard for radio equipment and ser-
vices; Part 52: Specific conditions for Cellular Communication Mobile and portable (UE) radio and ancillary equipment; Harmonized Standard cover-
ing the essential requirements of article 3.1(b) of Directive 2014/53/EU IMT cellular networks; Harmonized Standard covering the essential require-
ments of article 3.2 of the Directive 2014/53/EU; Part 1: Introduction and common requirements IMT cellular networks; Harmonized Standard covering the essential require-
ments of article 3.2 of the Directive 2014/53/EU; Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE) IMT cellular networks; Harmonized Standard covering the essential require-
ments of article 3.2 of the Directive 2014/53/EU; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE) Safety of information technology equipment Draft ETSI EN 301 489-19 V2.1.0 Draft ETSI EN 301 489-52 V1.1.0 ETSI EN 301 908-01 V11.1.1 ETSI EN 301 908-02 V11.1.2 ETSI EN 301 908-13 V11.1.2 EN 60950-1:2006/
A11:2009+A1:2010+A1 2:2011+A2:2013 1. ALAS66A-US complies with GCF-CC V3.72. Table 8: Requirements of quality IEC 60068 DIN EN 60529 Environmental testing IP codes Table 9: Standards of the Ministry of Information Industry of the Peoples Republic of China SJ/T 11363-2006 Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products (2006-06). Marking for Control of Pollution Caused by Electronic Information Products (2006-06). SJ/T 11364-2006 According to the Chinese Administration on the Control of Pollution caused by Electronic Information Products
(ACPEIP) the EPUP, i.e., Environmental Protection Use Period, of this product is 20 years as per the symbol shown here, unless otherwise marked. The EPUP is valid only as long as the product is operated within the operating limits described in the Hardware Interface Description. Please see Table 10 for an overview of toxic or hazardous substances or elements that might be contained in product parts in concentrations above the limits defined by SJ/T 11363-2006. ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 5.1 Directives and Standards 43 Page 38 of 51 Table 10: Toxic or hazardous substances or elements with defined concentration limits ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 5.2 SAR requirements specific to portable mobiles 43 Page 39 of 51 5.2 SAR requirements specific to portable mobiles Mobile phones, PDAs or other portable transmitters and receivers incorporating a GSM module must be in accordance with the guidelines for human exposure to radio frequency energy. This requires the Specific Absorption Rate (SAR) of portable ALAS66A based applications to be evaluated and approved for compliance with national and/or international regulations. Since the SAR value varies significantly with the individual product design manufacturers are advised to submit their product for approval if designed for portable use. For US and European markets the relevant directives are mentioned below. It is the responsibility of the manufacturer of the final product to verify whether or not further standards, recommendations or directives are in force outside these areas. Products intended for sale on US markets ES 59005/ANSI C95.1 Considerations for evaluation of human exposure to electromagnetic fields (EMFs) from mobile telecommunication equipment (MTE) in the frequency range 30MHz - 6GHz Products intended for sale on European markets EN 50360 EN 62311:2008 Product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic fields (300MHz - 3GHz) Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz) IMPORTANT:
Manufacturers of portable applications based on ALAS66A modules are required to have their final product certified and apply for their own FCC Grant and ISED Certificate related to the specific portable mobile. ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 5.3 Reference Equipment for Type Approval 43 5.3 Reference Equipment for Type Approval Page 40 of 51 The Gemalto M2M general reference setup submitted to type approve ALAS66A is shown in the figure below: Figure 16 illustrates the setup for general tests and evaluation purposes. The evaluation module can be plugged directly onto an Audio Adapter. The GSM/UMTS/LTE/
GNSS test equipment is still connected via SMA connectors on the evaluation module. The PC is connected via USB interface on the evaluation module, and the audio test equipment via au-
dio jack on the Audio Adapter. TRX 1 TRX 2 A LA S66A r o t i c a p a C k n a B S NS G i o d u A A udio Testequipm ent 2 . 0 / 3 . 0 B S U R X 3 RX4 PC T estequipm ent 4.0V Power Supply GN SS Testequipm ent GSM /W CDM A /LTE T estequipm ent Figure 16: Reference equipment for type approval Please note that for EMC and RF performance tests, slightly different reference equipment con-
figurations are used. If necessary, please contact Gemalto for further details. ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 5.4 Compliance with FCC and ISED Rules and Regulations 43 Page 41 of 51 5.4 Compliance with FCC and ISED Rules and Regulations The Equipment Authorization Certification for the Gemalto M2M modules reference application described in Section 5.3 will be registered under the following identifiers:
ALAS66A-W:
FCC Identifier QIPALAS66A-W Granted to Gemalto M2M GmbH ALAS66A-US:
FCC Identifier QIPALAS66A-US ISED Certification Number: 7830A-ALAS66AUS Granted to Gemalto M2M GmbH Manufacturers of mobile or fixed devices incorporating ALAS66A-W modules are authorized to use the FCC Grants and ISED Certificates of the ALAS66A-W modules for their own final prod-
ucts according to the conditions referenced in these documents. In this case, the FCC label of the module shall be visible from the outside, or the host device shall bear a second label stating
"Contains FCC ID: QIPALAS66A-W"or "Contains FCC ID: QIPALAS66A-US", and accordingly Contains IC: 7830A-ALAS66AUS. The integration is limited to fixed or mobile categorized host devices, where a separation distance between the antenna and any person of min. 20cm can be assured during normal operating conditions. For mobile and fixed operation configurations the antenna gain, including cable loss, must not exceed the limits listed in the following Table 11 and Table 12 for FCC and/or ISED. Table 11: Antenna gain limits for FCC for ALAS66A-W Maximum gain in operating band 850MHz (GSM) 1900MHZ (GSM) Band V (UMTS) Band 5 (LTE-FDD) Band 7 (LTE-FDD) Band 26 (LTE-FDD) FCC limit 2.5 8.0 8.5 9.4 12.0 9.8 Table 12: Antenna gain limits for FCC and ISED for ALAS66A-US Maximum gain in operating band 850MHz (GSM) 1900MHZ (GSM) Band II (UMTS) Band IV (UMTS) Band V (UMTS) Band 2 (LTE-FDD) Band 4 (LTE-FDD) Band 5 (LTE-FDD) FCC limit 3.4 2.0 7.5 4.7 8.4 9.1 6.5 9.4 Unit dBi dBi dBi dBi dBi dBi Unit dBi dBi dBi dBi dBi dBi dBi dBi ISED limit 0.1 2.0 7.5 4.7 5.1 8.5 6.5 6.1 ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 5.4 Compliance with FCC and ISED Rules and Regulations 43 Table 12: Antenna gain limits for FCC and ISED for ALAS66A-US Maximum gain in operating band Band 7 (LTE-FDD) Band 12 (LTE-FDD) Band 13 (LTE-FDD) Band 66(LTE-FDD) FCC limit 6.5 9.2 8.7 6.4 Page 42 of 51 ISED limit 6.5 5.9 5.6 6.4 Unit dBi dBi dBi dBi IMPORTANT:
Manufacturers of portable applications incorporating ALAS66A-W/-US modules are required to have their final product certified and apply for their own FCC Grant and/or ISED Certificate re-
lated to the specific portable mobile. This is mandatory to meet the SAR requirements for por-
table mobiles (see Section 5.2 for detail). Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules and with ISED license-exempt RSS standard(s). These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off and on, the user is en-
couraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver Increase the separation between the equipment and receiver. is connected. Consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 5.4 Compliance with FCC and ISED Rules and Regulations 43 Page 43 of 51 If Canadian approval is requested for devices incorporating ALAS66A modules the above note will have to be provided in the English and French language in the final user documentation. Manufacturers/OEM Integrators must ensure that the final user documentation does not con-
tain any information on how to install or remove the module from the final product. Notes (ISED):
(EN) This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Opera-
tion is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
(FR) Cet appareil numrique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer d'interfrence et (2) cet appareil doit accepter toute interfrence, notamment les interfrences qui peuvent affecter son fonctionnement.
(EN) Radio frequency (RF) Exposure Information The radiated output power of the Wireless Device is below the Industry Canada (IC) radio fre-
quency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This device has also been evaluated and shown compliant with the IC RF Exposure limits un-
der mobile exposure conditions. (antennas are greater than 20cm from a persons body).
(FR) Informations concernant l'exposltion aux frquences radio (RF) La puissance de sortie mise par l'appareil de sans fiI est infrieure la limite d'exposition aux frquences radio dIndustry Canada (IC). Utilisez l'appareil de sans fil de faon minimiser les contacts humains lors du fonctionnement normal. Ce priphrique a galement t valu et dmontr conforme aux limites d'exposition aux RF d'IC dans des conditions d'exposition des appareils mobiles (les antennes se situent moins de 20cm du corps d'une personne). ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 6 Document Information 48 6 Document Information Page 44 of 51 Revision History 6.1 Preceding document: "Cinterion ALAS66A Hardware Interface Overview" v00.001 New document: "Cinterion ALAS66A Hardware Interface Overview" v01.000a Chapter 1.2.1 1.2.2 4.1 5.4 What is new Revised support for LTE-FDD Band 41. Added LTE-FDD Band 30. Added note for LTE-FDD Band 66. Added note that carrier aggregation is planned, and will be supported in a future version. Added note to Figure 14. Revised section and added antenna gain limits. New document: "Cinterion ALAS66A Hardware Interface Overview" v00.001 Chapter
--
What is new Initial document setup. ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Page 45 of 51 Cinterion ALAS66A Hardware Interface Overview 6.2 Related Documents 48 6.2 Related Documents
[1] ALAS66A Release Note
[2] Application Note 48: SMT Module Integration
[3] Universal Serial Bus Specification Revision 3.0
[4] Universal Serial Bus Specification Revision 2.0 6.3 Terms and Abbreviations Abbreviation ANSI ARP CA CE CS CS CSD DL dnu DRX DSB DTX EDGE EGSM EMC ESD ETS ETSI FDD GPRS GSM HiZ HSDPA I/O IMEI ISED ISO Description American National Standards Institute Antenna Reference Point Carrier Aggregation Conformit Europene (European Conformity) Coding Scheme Circuit Switched Circuit Switched Data Download Do not use Discontinuous Reception Development Support Board Discontinuous Transmission Enhanced Data rates for GSM Evolution Extended GSM Electromagnetic Compatibility Electrostatic Discharge European Telecommunication Standard European Telecommunications Standards Institute Frequency Division Duplex General Packet Radio Service Global Standard for Mobile Communications High Impedance High Speed Downlink Packet Access Input/Output International Mobile Equipment Identity Innovation, Science and Economic Development Canada International Standards Organization ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 6.3 Terms and Abbreviations 48 Page 46 of 51 Abbreviation ITU kbps LED LGA LTE MBB Mbps MCS MIMO MLCC eMMC MO MS MSL MT nc NTC PCB PCIe PCL PCS PD PDU PS PSK PU QAM R&TTE RF rfu ROPR RTC Rx SAR SELV SIM Description International Telecommunications Union kbits per second Light Emitting Diode Land Grid Array Long term evolution Moisture barrier bag Mbits per second Modulation and Coding Scheme Multiple Input Multiple Output Multi Layer Ceramic Capacitor Embedded MultiMediaCard Mobile Originated Mobile Station, also referred to as TE Moisture Sensitivity Level Mobile Terminated Not connected Negative Temperature Coefficient Printed Circuit Board Peripheral Component Interconnect Express Power Control Level Personal Communication System, also referred to as GSM 1900 Pull Down resistor Protocol Data Unit Packet Switched Phase Shift Keying Pull Up resistor Quadrature Amplitude Modulation Radio and Telecommunication Terminal Equipment Radio Frequency Reserved for future use Radio Output Power Reduction Real Time Clock Receive Direction Specific Absorption Rate Safety Extra Low Voltage Subscriber Identification Module ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 6.3 Terms and Abbreviations 48 Page 47 of 51 Abbreviation SMD SMS SMT SRAM SRB TE TPC TS Tx UL UMTS URC USB UICC USIM WCDMA Description Surface Mount Device Short Message Service Surface Mount Technology Static Random Access Memory Signalling Radio Bearer Terminal Equipment Transmit Power Control Technical Specification Transmit Direction Upload Universal Mobile Telecommunications System Unsolicited Result Code Universal Serial Bus USIM Integrated Circuit Card UMTS Subscriber Identification Module Wideband Code Division Multiple Access ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 6.4 Safety Precaution Notes 48 6.4 Safety Precaution Notes Page 48 of 51 The following safety precautions must be observed during all phases of the operation, usage, service or repair of any cellular terminal or mobile incorporating ALAS66A. Manufacturers of the cellular terminal are advised to convey the following safety information to users and oper-
ating personnel and to incorporate these guidelines into all manuals supplied with the product. Failure to comply with these precautions violates safety standards of design, manufacture and intended use of the product. Gemalto M2M assumes no liability for customers failure to comply with these precautions. When in a hospital or other health care facility, observe the restrictions on the use of mobiles. Switch the cellular terminal or mobile off, if instructed to do so by the guide-
lines posted in sensitive areas. Medical equipment may be sensitive to RF energy. The operation of cardiac pacemakers, other implanted medical equipment and hear-
ing aids can be affected by interference from cellular terminals or mobiles placed close to the device. If in doubt about potential danger, contact the physician or the manufac-
turer of the device to verify that the equipment is properly shielded. Pacemaker patients are advised to keep their hand-held mobile away from the pacemaker, while it is on. Switch off the cellular terminal or mobile before boarding an aircraft. Make sure it can-
not be switched on inadvertently. The operation of wireless appliances in an aircraft is forbidden to prevent interference with communications systems. Failure to observe these instructions may lead to the suspension or denial of cellular services to the offender, legal action, or both. Do not operate the cellular terminal or mobile in the presence of flammable gases or fumes. Switch off the cellular terminal when you are near petrol stations, fuel depots, chemical plants or where blasting operations are in progress. Operation of any elec-
trical equipment in potentially explosive atmospheres can constitute a safety hazard. Your cellular terminal or mobile receives and transmits radio frequency energy while switched on. Remember that interference can occur if it is used close to TV sets, radios, computers or inadequately shielded equipment. Follow any special regulations and always switch off the cellular terminal or mobile wherever forbidden, or when you suspect that it may cause interference or danger. IMPORTANT!
Cellular terminals or mobiles operate using radio signals and cellular networks. Because of this, connection cannot be guaranteed at all times under all conditions. Therefore, you should never rely solely upon any wireless device for essential com-
munications, for example emergency calls. Remember, in order to make or receive calls, the cellular terminal or mobile must be switched on and in a service area with adequate cellular signal strength. Some networks do not allow for emergency calls if certain network services or phone features are in use (e.g. lock functions, fixed dialing etc.). You may need to deactivate those features before you can make an emergency call. Some networks require that a valid SIM card be properly inserted in the cellular termi-
nal or mobile. ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 7 Appendix 50 Page 49 of 51 7 Appendix List of Parts and Accessories 7.1 Table 13: List of parts and accessories Description ALAS66A Supplier Gemalto M2M Standard module Ordering information Gemalto M2M IMEI:
Packaging unit (ordering) number:
L30960-N5000-A100 (ALAS66A-W) L30960-N5010-A100 (ALAS66A-E) L30960-N5020-A100 (ALAS66A-CN) L30960-N5030-A100(ALAS66A-US) Module label number:
L30960-N5000-A1001 (ALAS66A-W) L30960-N5010-A1001 (ALAS66A-E) L30960-N5020-A1001 (ALAS66A-CN) L30960-N5030-A1001 (ALAS66A-US) ALAS66A Evaluation module Gemalto M2M Ordering number:
L30960-N5001-A100 (ALAS66A-W) L30960-N5011-A100 (ALAS66A-E) L30960-N5021-A100 (ALAS66A-CN) L30960-N5031-A100 (ALAS66A-US) Audio Adapter for ALAS66A Evaluation modules Votronic Handset VOTRONIC /
Gemalto M2M Gemalto M2M Not available Votronic ordering number: HH-SI-30.3/V1.1/0 Votronic Entwicklungs- und Produktionsgesellschaft fr elek-
tronische Gerte mbH Saarbrcker Str. 8 66386 St. Ingbert Germany Phone: +49-(0)6 89 4 / 92 55-0 Fax: +49-(0)6 89 4 / 92 55-88 Email: contact@votronic.com Ordering numbers: 91228 91236 Sales contacts are listed in Table 14. Sales contacts are listed in Table 14 and Table 15. SIM card holder incl. push button ejector and slide-in tray U.FL antenna connector Molex Molex or Hirose 1. Note: At the discretion of Gemalto M2M, module label information can either be laser engraved on the modules shielding or be printed on a label adhered to the modules shielding. ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 Cinterion ALAS66A Hardware Interface Overview 7.1 List of Parts and Accessories 50 Page 50 of 51 Table 14: Molex sales contacts (subject to change) Molex For further information please click:
http://www.molex.com Molex China Distributors Beijing, Room 1311, Tower B, COFCO Plaza No. 8, Jian Guo Men Nei Street, 100005 Beijing P.R. China Phone: +86-10-6526-9628 Fax: +86-10-6526-9730 Molex Deutschland GmbH Otto-Hahn-Str. 1b 69190 Walldorf Germany Phone: +49-6227-3091-0 Fax: +49-6227-3091-8100 Email: mxgermany@molex.com Molex Singapore Pte. Ltd. 110, International Road Jurong Town, Singapore 629174 American Headquarters Lisle, Illinois 60532 U.S.A. Phone: +1-800-78MOLEX Fax: +1-630-969-1352 Molex Japan Co. Ltd. 1-5-4 Fukami-Higashi, Yamato-City, Kanagawa, 242-8585 Japan Phone: +65-6-268-6868 Fax: +65-6-265-6044 Phone: +81-46-265-2325 Fax: +81-46-265-2365 Table 15: Hirose sales contacts (subject to change) Hirose Ltd. For further information please click:
http://www.hirose.com Hirose Electric (U.S.A.) Inc 2688 Westhills Court Simi Valley, CA 93065 U.S.A. Phone: +1-805-522-7958 Fax: +1-805-522-3217 Hirose Electric Co., Ltd. 5-23, Osaki 5 Chome, Shinagawa-Ku Tokyo 141 Japan Hirose Electric Europe B.V. UK Branch:
First Floor, St. Andrews House, Caldecotte Lake Business Park, Milton Keynes MK7 8LE Great Britain Hirose Electric Europe B.V. German Branch:
Herzog-Carl-Strasse 4 73760 Ostfildern Germany Phone: +49-711-456002-1 Fax: +49-711-456002-299 Email: info@hirose.de Hirose Electric Europe B.V. Hogehillweg 8 1101 CC Amsterdam Z-O Netherlands Phone: +44-1908-369060 Fax: +44-1908-369078 Phone: +81-03-3491-9741 Fax: +81-03-3493-2933 Phone: +31-20-6557-460 Fax: +31-20-6557-469 ALAS66A_HIO_v01.000a Confidential / Released 2019-02-26 51 About Gemalto Since 1996, Gemalto has been pioneering groundbreaking M2M and IoT products that keep our customers on the leading edge of innovation. We work closely with global mobile network operators to ensure that Cinterion modules evolve in sync with wireless networks, providing a seamless migration path to protect your IoT technology investment. Cinterion products integrate seamlessly with Gemalto identity modules, security solutions and licensing and monetization solutions, to streamline development timelines and provide cost efficiencies that improve the bottom line. As an experienced software provider, we help customers manage connectivity, security and quality of service for the long lifecycle of IoT solutions. For more information please visit www.gemalto.com/m2m, www.facebook.com/gemalto, or Follow@gemaltoIoT on Twitter. Gemalto M2M GmbH Werinherstrasse 81 81541 Munich Germany GEMALTO.COM/M2M
. s e i r t n u o c i n a t r e c n i i d e r e t s g e r e r a d n a o t l a m e G f o s k r a m e c v r e s i d n a s k r a m e d a r t e r a
, o g o l o t l a m e G e h t
, o t l a m e G
. d e v r e s e r s t h g i r l l A
. 9 1 0 2 o t l a m e G