companies    

FCC ID: QIPPDS5-US PDS5-US

by: Gemalto M2M GmbH latest update: 2019-02-26 model: PDS5-US

Three grants have been issued under this FCC ID from 10/31/2014 to 02/26/2019 (this is one of twenty-five releases in 2019 for this grantee). Public details available include internal & external photos, manuals, and frequency information. some products also feature user submitted or linked password defaults, instructions, troubleshooting guides, warrantee terms, & drivers.
permalink for this FCC identifier
search for: Repair details
from iFixIt
 Replacement
on Amazon
 Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
all frequencies exhibits applications
manuals
app s submitted / available
1 2 3 UM Users Manual pdf 453.05 KiB
1 2 3 TempConfidential user manual Rev 2 Users Manual pdf 1.12 MiB November 03 2015
1 2 3
Cover Letter(s) pdf
1 2 3
External Photos pdf
1 2 3 I18D00183 Internal Photo Internal Photos pdf 408.15 KiB
1 2 3
RF Exposure Info pdf February 15 2019 / February 26 2019
1 2 3
RF Exposure Info pdf
1 2 3
Test Report pdf
1 2 3 BOM Parts List/Tune Up Info pdf February 15 2019 confidential
1 2 3
Cover Letter(s) pdf
1 2 3
Cover Letter(s) pdf
1 2 3 Operetion Description Operational Description pdf February 15 2019 confidential
1 2 3
Cover Letter(s) pdf
1 2 3 Block diagram Block Diagram pdf February 15 2019 confidential
1 2 3 SCH Schematics pdf February 15 2019 confidential
1 2 3 Tune up procedure Parts List/Tune Up Info pdf February 15 2019 confidential
1 2 3
ID Label/Location Info pdf
1 2 3 part placement SCH Operational Description pdf February 15 2019 confidential
1 2 3
Cover Letter(s) pdf
1 2 3 PDSx HW Delta Description Rel.1(B2.1) to Rel.4(B2.2) Operational Description pdf February 15 2019 confidential
1 2 3
Cover Letter(s) pdf November 03 2015
1 2 3
RF Exposure Info pdf November 03 2015
1 2 3
Cover Letter(s) pdf November 03 2015
1 2 3
Test Report pdf November 03 2015
1 2 3
Cover Letter(s) pdf November 03 2015
1 2 3
Cover Letter(s) pdf November 03 2015
1 2 3
Test Setup Photos pdf
1 2 3
External Photos pdf
1 2 3
Internal Photos pdf
1 2 3
Cover Letter(s) pdf
1 2 3
ID Label/Location Info pdf
1 2 3
External Photos pdf
1 2 3
Internal Photos pdf
1 2 3
RF Exposure Info pdf
1 2 3
Test Report pdf
1 2 3
Test Setup Photos pdf
1 2 3 UM Users Manual pdf 453.05 KiB
1 2 3 TempConfidential user manual Rev 2 Users Manual pdf 1.12 MiB November 03 2015
1 2 3 I18D00183 Internal Photo Internal Photos pdf 408.15 KiB

frequency equipment class purpose
1 2019-02-26 1850.2 ~ 1909.8 PCB - PCS Licensed Transmitter Class II permissive change or modification of presently authorized equipment
2 2015-03-27 1852.4 ~ 1907.6 PCB - PCS Licensed Transmitter
3 2014-10-31 1852.4 ~ 1907.6 PCB - PCS Licensed Transmitter Original Equipment

Application Forms

app s Applicant Information
1 2 3 Effective 2019-02-26
1 2 3 2015-03-27
1 2 3 2014-10-31
1 2 3 Applicant's complete, legal business name Gemalto M2M GmbH
1 2 3 FCC Registration Number (FRN) 0007412448
1 2 3 Physical Address Siemensdamm 50
1 2 3 Berlin, N/A 13629
1 2 3 Germany
app s TCB Information
1 2 3 TCB Application Email Address t******@timcoengr.com
1 2 3 h******@acbcert.com
1 2 3 TCB Scope B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
app s FCC ID
1 2 3 Grantee Code QIP
1 2 3 Equipment Product Code PDS5-US
app s Person at the applicant's address to receive grant or for contact
1 2 3 Name A**** H****
1 2 3 Title Manager Certifications
1 2 3 Telephone Number 00493********
1 2 3 Fax Number 00493********
1 2 3 E-mail a******@gemalto.com
app s Technical Contact
1 2 3 Firm Name Beijing 7Layers
1 2 3 Gemalto M2M GmbH
1 2 3 Name K****** G****
1 2 3 T**** L********
1 2 3 Physical Address 1F, Building B, Qingdong Business Center
1 2 3 Siemensdamm 50 Berlin 13629 Germany
1 2 3 Beijing
1 2 3 Berlin, 13629
1 2 3 China
1 2 3 Germany
1 2 3 Telephone Number 86-10******** Extension:
1 2 3 49 30********
1 2 3 +49 3********
1 2 3 Fax Number 86-10********
1 2 3 49 30********
1 2 3 E-mail k******@7layers.com
1 2 3 t******@gemalto.com
app s Non Technical Contact
1 2 3 Firm Name East China Institute of Telecommunications
1 2 3 Name Y**** Z****
1 2 3 Physical Address 7F, G Area,No. 668, Beijing East Road
1 2 3 Shanghai, 200001
1 2 3 China
1 2 3 Telephone Number 86-21******** Extension:
1 2 3 Fax Number 86-21********
1 2 3 E-mail z******@ecit.org.cn
app s Confidentiality (long or short term)
1 2 3 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 No
1 2 3 If so, specify the short-term confidentiality release date (MM/DD/YYYY format)08/25/2019
1 2 3 09/23/2015
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 Is this application for software defined/cognitive radio authorization?No
1 2 3 Equipment ClassPCB - PCS Licensed Transmitter
1 2 3 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)PDS5-US
1 2 3 GSM/WCDMA Module
1 2 3 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
1 2 3 Modular Equipment TypeDoes not apply
1 2 3 Single Modular Approval
1 2 3 Purpose / Application is forClass II permissive change or modification of presently authorized equipment
1 2 3 Original Equipment
1 2 3 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?No
1 2 3 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 3 Grant CommentsClass II Permissive Change, Minor circuitry for non transmitter portions. Power out is conducted at the antenna terminal. ERP for part 22 is 34.30 dBm and EIRP for part 24 is 31.50 dBm. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End- Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install the PDS5-US module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 8.01 dBi at 1900 MHz and 6.01 dBi at 850 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7W erp Part 22 and the 2W eirp Part 24 power limits. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.
1 2 3 Class II Permissive Change, Minor circuitry for non transmitter portions. Power out is conducted at the antenna terminal. ERP for part 22 is 34.30 dBm and EIRP for part 24 is 31.50 dBm. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End- Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install the PDS5-US module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 2.15 dBi at 1900 MHz and 2.15 dBi at 850 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7W erp Part 22 and the 2W eirp Part 24 power limits. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.
1 2 3 Power out is conducted at the antenna terminal. ERP for part 22 is 34.30 dBm and EIRP for part 24 is 31.50 dBm. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install the PDS5-US module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 2.15 dBi at 1900 MHz and 2.15 dBi at 850 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7W erp Part 22 and the 2W eirp Part 24 power limits. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.
1 2 3 Is there an equipment authorization waiver associated with this application?No
1 2 3 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 3 Firm Name East China Institute of Telecommunications
1 2 3 UniLab (Shanghai) Co., Ltd.
1 2 3 Name Z****** Z******
1 2 3 W**** R****
1 2 3 Telephone Number 86-21********
1 2 3 86-21********
1 2 3 Fax Number 86-21********
1 2 3 E-mail z******@ecit.org.cn
1 2 3 w******@unilab.cn
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 22H 824.2 848.8 2.138 0.1 ppm 244KGXW
1 2 22H 824.2 848.8 0.558 0.1 ppm 247KG7W
1 3 24E 1850.2 1909.8 1.035 0.1 ppm 247KGXW
1 4 24E 1850.2 1909.8 0.42 0.1 ppm 248KG7W
1 5 24E 1852.4 1907.6 0.256 0.1 ppm 4M07F9W
1 6 22H 826.4 846.6 0.267 0.1 ppm 4M07F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 22H BC 824.2 848.8 1.66 25 Hz 244KGXW
2 2 22H BC 824.2 848.8 0.41 18 Hz 253KG7W
2 3 24E BC 1850.2 1909.8 0.86 10 Hz 244KGXW
2 4 24E BC 1850.2 1909.8 0.34 22 Hz 247KG7W
2 5 22H BC 826.4 846.6 0.21 13 Hz 4M07F9W
2 6 24E BC 1852.4 1907.6 0.21 21 Hz 4M07F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 22H BC 824.2 848.8 1.66 25 Hz 244KGXW
3 2 22H BC 824.2 848.8 0.41 18 Hz 253KG7W
3 3 24E BC 1850.2 1909.8 0.86 10 Hz 244KGXW
3 4 24E BC 1850.2 1909.8 0.34 22 Hz 247KG7W
3 5 22H BC 826.4 846.6 0.21 13 Hz 4M07F9W
3 6 24E BC 1852.4 1907.6 0.21 21 Hz 4M07F9W

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

potentially related items: QIPEHS5-US User Manual QIPPLS62-W User Manual QIPALS6A-E User Manual

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC