37" HD Soundbar with Bluetooth Wireless and Subwoofer Users Guide for Model ITB396B For the most of this Users Guide, go to www.iLiveElectronics.com Safety Instructions & Warnings CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE D' LECTROCUTION NE PAS OUVRIR Warning: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and mainte-
nance (servicing) instructions in the literature accompanying the appliance. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products en-
closure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol indicates that this product incor-
porates double insulation between hazardous mains voltage and user accessible parts. Warning: DO NOT INgEsT BaTTERy, CHEmICal BuRN HazaRD. Important Safety Instructions ReadtheseInstructions. KeeptheseInstructions. HeedallWarnings. Followallinstructions. Donotusethisapparatusnearwater. Cleanonlywithadrycloth. Donotblockanyventilationopenings.Installinaccordance withthemanufacturersinstructions. Donotinstallnearanyheatsourcessuchasradiators,heat registers,stoves,orotherapparatus(includingamplifiers)that produceheat. Donotdefeatthesafetypurposeofthepolarizedorground-
ing-typeplug.Apolarizedplughastwobladeswithone widerthantheother.Agroundingtypeplughastwoblades andathirdgroundingprong.Thewidebladeorthethird prongareprovidedforyoursafety.Whentheprovidedplug doesnotfitintoyouroutlet,consultanelectricianforreplace-
mentoftheobsoleteoutlet. Protectthepowercordfrombeingwalkedonorpinched particularlyatplugs,conveniencereceptacles,andthepoint wheretheyexitfromtheapparatus. Onlyuseattachments/accessoriesspecifiedbythemanu-
facturer. Unplugthisapparatusduringlightningstormsorwhen unusedforlongperiodsoftime. Referallservicingtoqualifiedservicepersonnel.Servicing isrequiredwhentheapparatushasbeendamagedinany way,suchaspower-supplycordorplugisdamaged,liquid hasbeenspilledorobjectshavefallenintotheapparatus,the apparatushasbeenexposedtorainormoisture,doesnot operatenormally,orhasbeendropped. Useonlywithacart,stand,tripod,bracket, ortablespecifiedbythemanufacturer,or soldwiththeapparatus.Whenacartisused, usecautionwhenmovingthecart/apparatus combinationtoavoidinjuryfromtip-over. FCC Warnings Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential instal-
lation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorientorrelocatethereceivingantenna. Increasetheseparationbetweentheequipmentandreceiver. Connecttheequipmentintoanoutletonacircuitdifferent fromthattowhichthereceiverisconnected. Consultthedealeroranexperiencedradio/TVtechnician forhelp. 2 FCC Radiation Exposure Statement This equipment complied with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Safety Instructions & Warnings Additional Warnings and Precautions CauTION: TO PREVENT ElECTRIC sHOCK, maTCH WIDE BlaDE OF Plug TO WIDE slOT, Fully INsERT. Avis: AFIN DE PRVENIR LES CHOCS LCTRIQUES, FAITES CORRESPONDRE LA FICHE BLANCHE DE LA PRISE LA FENTE LARGE, INSREZ TOTALEMENT. mains plug is used as disconnect device and it should remain readily operable during intended use. In order to discon-
nect the apparatus from the mains completely, the mains plug should be disconnected form the mains socket outlet completely. La prise du secteur est utilis pour dconnecter le systme. La prise du secteur ne doit pas tre obstrue ou doit tre facilement accessible pendant son utilisation. Pour tre compltement dconnect de lalimentation dentre, la prise doit tre dbranche du secteur. WaRNINg: shock hazard - Do Not Open. aVIs: Risque de choc lectrique - ne pas ouvrir. Caution and marking information is located at the rear or bottom of the apparatus. Attention et de marquage des informations est situ sur le paneau arrire ou infrieur de lunit. WaRNINg: To reduce the risk of fire or electric shock, do not expose this apparatus to rain, moisture, dripping, or splashing. Avis: Pour rduire le risque d'incendie ou de choc lectrique, n'exposez pas cet appareil la pluie ou l'humidit ou aux claboussures. Objects filled with liquids, such as vases, shall not be placed on the apparatus. Objets remplis de liquides, comme des vases, ne doivent pas tre placs sur lappareil. CaUTiOn: use of controls or adjustments or performance of procedures other than those specified may result in hazard-
ous radiation exposure. aViS: Lutilisation de commande ou lexcution de proc-
dures autres que celles spcifies ici peuvent aboutir une exposition des radiations dangereuses. WaRNINg: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. aViS: Des changements ou des modifications sur ce produit non expressment approuvs par la partie responsable de la conformit peut annuler le droit de lutilisateur dutiliser cet quipement. WaRNINg: Do not place this unit directly onto furniture surfaces with any type of soft, porous, or sensitive finish. as with any rubber compound made with oils, the feet could cause marks or staining where the feet reside. We recom-
mend using a protective barrier such as a cloth or a piece of glass between the unit and the surface to reduce the risk of damage and/or staining. aViS: Ne placez pas cette unit directement sur des surfaces de meubles dont la finition serait douce, poreuse ou sensible. Car, comme tout compos caoutchouc a base dhuiles, les pieds pourraient laisser des tracs ou des taches lendroit ou ils sont poss. Nous recommandons dutiliser une protection comme un linge ou un morceau de verre entre lunit et la surface pour rduire le risque de dgt et/ou de tache. WaRNINg: use of this unit near fluorescent lighting may cause interference regarding use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause. aViS: Lutilisation de cette unit en prsence de lumires flu-
orescentes peut causer des interfrences lors de lutilisation de la tlcommande. En cas de dysfonctionnement, teignez les sources de lumire fluorescentes, car celles-ci pourraient en tre la cause. CauTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. aVIs: Un danger dexplosion est prsent lorsque les piles sont remplaces de manire incorrecte. Remplacez seulement les piles par des piles de type quivalent. Battery shall not be exposed to excessive heat such as sunshine, fire or the like. Les piles ne doivent pas tre exposes de forte chaleur, tel qu la lumire du soleil, au feu ou autres choses de semblable. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. Gardez les piles neuves et doccasion partir des enfants. Si le compartiment de la batterie ne pas fermer correctement, cesser dutiliser le produit et garder loin des enfants. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. si vous pensez que les batteries peuvent avoir t aval ou plac lintrieur dune partie du corps, consulter immdiate-
ment un mdecin. Do not mix old and new batteries. Ne pas mlanger vieilles et nouvelles batteries. Completely replace all old batteries with new ones. Remplacer compltement toutes les piles par des neuves. Do not mix alkaline, standard (carbon-zinc), or rechargeable
(ni-cad, ni-mh, etc) batteries. Ne mlangez pas des piles alcalines, standard (carbone-zinc) ou rechargeables (Ni-Cd, Ni-MH, etc) batteries. Batteries should be recycled or disposed of as per state and local guidelines. Piles doivent tre recycles ou limines selon les directives tatiques et locales. WaRNINg: This product may contain chemicals known to the state of California to cause birth defects, or other reproductive harm (California Prop 65). Wash hands after handling. This product meets and complies with all Federal regulations. 3 Table of Contents Setup 5 Features & Specifications Power Remote Battery Includes Orientation 6 Rear View Speaker Inputs Detail Speaker Controls (Right Side) Function/Source Indicator Lights Remote 8 Bluetooth Wireless 9 Pairing a Bluetooth Device for the First Time Playing Audio Wirelessly Audio Inputs 10 Stereo RCA Inputs (Aux In) Optical Input Line In Company Information 12 Contact Information Warranty International Support 4 Setup Features & Specifications Includes Remote control with 1 CR2025 button cell battery Optical audio cable AC/DC power adapter Wall-mount hardware and instructions 37" length Supports Bluetooth Wireless range: 60 ft. 2 channel stereo sound Digital volume control Full-function remote Optical digital audio input Line In (3.5mm audio input) Aux In (RCA stereo audio inputs) Power R L LINE IN AUX IN OPTICAL IN DC IN Plug the small end of the power cord into the DC Input on the back of the speaker, and the large plug into a standard wall outlet. Remote Battery N E P O H S U P 5 2 0 2 R C Y R E T 5 V 2 3 T A 0 R 2 B M C U I H LIT LITHIU M BATTERY CR 2025 3V Slide out Remote control: requires 1 CR2025 battery (included). Push here 5 Wall Mount Pegs Orientation Rear View R L LINE IN AUX IN OPTICAL IN DC IN Speaker Inputs Speaker Inputs Detail R L LINE IN AUX IN OPTICAL IN DC IN Line In ( 3.5mm audio input) Stereo RCA Audio Inputs (AUX IN) Optical Input DC Power Input 6 Speaker Controls (Right Side) Power Press to power the unit on or off. Source Press to switch between Optical, Line In, AUX, and Bluetooth modes. Volume +/-
Press to adjust the volume up or down. Pair Press and hold to begin pairing to a Bluetooth device. Function/Source Indicator Lights StAtUS Power Off Optical Mode Aux In Mode Line In Mode Bluetooth Pairing Bluetooth Connected POWER SOURCE VOLUME +
VOLUME PAIR INDICAtOR Red Light Amber Light White Light Green Light Flashing Blue Light Blue Light 7 POWER SOURCE MUTE LINE IN OPTICAL AUX MUSIC MOVIE DIALOG TREBLE BASS VOLUME Mute Press to mute the volume. Music Press to switch to the EQ optimized for music. Movie Press to switch to the EQ optimized for movie sound. Dialog Press to switch to the EQ optimized for dialog. Skip Back/Fwd In Bluetooth mode, press to skip the selected track. Play/Pause In Bluetooth mode, press to play or pause the selected track. Remote Power Press to turn the unit on or off. Press to switch to Bluetooth Mode. Line In Press to switch to Line In mode. Optical Press to switch to Optical mode. AUX Press to switch to RCA/Aux mode. treble Press to adjust the treble up or down. Bass Press to adjust the bass up or down Volume Press to adjust the volume. 8 Bluetooth Wireless Pairing a Bluetooth Device for the First time 1. Power on the unit by pressing the Power button. 2. Press the button on the remote to switch to Bluetooth Mode, indicated by a slowly flashing blue light. You can also press the Source button on the side of the unit. 3. Press and hold the Pair button on the side of the unit. The pairing indicator will flash blue quickly. When pairing, remain within 3 feet of the unit. 4. Use the controls on your Bluetooth device to select ItB396 in your Bluetooth settings to pair. If your device requests a password, enter the default password 0 0 0 0 . Refer to the users manual for your specific device for instructions on pairing and connecting Bluetooth devices. 5. When successfully paired and connected, a beep will issue from the soundbar and the Pairing Indicator will display a solid blue light. After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device. If your device should become unpaired or you find it is unable to connect, repeat the above steps. Playing Audio Wirelessly 1. After pairing to a Bluetooth device, use the controls on the connected Bluetooth Device to select a track. 2. Play, pause or skip a selected track using the controls on the connected Bluetooth Device or the soundbar's remote. 3. Audio played through the connected Bluetooth device will now be heard through the speakers. 9 Audio Inputs Stereo RCA Inputs (Aux In) When connecting two products using an RCA cable (not included), match the colored ports to their corresponding plugs. 1. Connect the RCA cables (not included) to the RCA Stereo Inputs located on the back of the unit, and to the audio outputs on a television or other audio source. 2. Press the Power button to power on the unit. 3. Press the Source button to select Aux In, indicated by a white light. 4. Audio played through the television will now be heard through the speakers. Optical Input You will need an audio source with an Optical Audio Output and a Digital Optical Audio Cable (included). 1. Connect the Digital Optical Audio Cable to the optical output on the audio source and to the Optical Input on the speaker bar. 2. Press the Power button to power the unit on. 3. Press the Source button repeatedly to switch to SPDIF Mode, indicated by a amber light. 4. Using the native controls on your connected device, make sure the audio settings are set to PCM or Optical Audio and are turned On. 5. Audio from the connected audio source will now be played through the speakers. Important tips for optical audio:
Use the correct toslink cable and make sure that it is firmly seated in both source and sound bar sockets. Optical output is activated on the source (they should see a red light emitting from the toslink socket). It may be labeled SPDIF in the setting menu of the source. The optical output is set to output PCM and not Dolby Digital. Line In 3.5 mm audio input cable not included. 1. Plug one end of a 3.5 mm audio input cable into the Line In on the unit and plug the other end of the cable into the audio output/headphone output on an MP3 Player or other audio source. 2. Press the Power button to power the unit on. 3. Press the Source button to select Line In, indicated by a green light. 4. Audio played through the connected device will now be heard through the speakers. Use the controls on the connected device to play, pause, or skip selected tracks. 10 Stereo RCA Inputs (Aux In) - Detail R L LINE IN AUX IN OPTICAL IN DC IN Optical Input - Detail R L LINE IN AUX IN OPTICAL IN DC IN Line In Line In - Detail R L LINE IN AUX IN OPTICAL IN DC IN R L LINE IN AUX IN OPTICAL IN DC IN 11 Company Information Contact Information Website: www.iLiveElectronics.com Email Support: prodinfo@dpiinc.com Email Parts: partsinfo@dpiinc.com Phone Support: 1-888-999-4215 Warranty For Warranty Information and the most of this Users Guide, go to:
www.iLiveElectronics.com International Support To download this Users Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.com Para descargar este Manual del Usuario en ingls, espaol y francs, o para obtener respuestas a preguntas frecuentes, visite la seccin de apoyo en: www.iLiveElectronics.com Pour tlcharger ce guide de lutilisateur en anglais, espagnol ou franais, ou pour obtenir des rponses des questions frquemment poses, consultez la rubrique dassistance sur: www.iLiveElectronics.com Copyright 2016 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice. 12