BACK LABEL
FCC ID: MXF-C5500XK
FCC ID: MXF-C5500XK
Serial no. : C5500XKYYWWXXXXXX
MAC XX . XX . XX . XX . XX . XX
Modem GUI Address:
Admin Username:
Admin Password:
HW version:
FSAN ID:
CLEI:
192.168.0.1
admin
f3Fa6f76
0.1
AXON000A13CF
BVMLA00ARA
FCC ID: MXF-C5500XK
MZS229
Fasson®
50 micron White PET
TC4/S8040E/Embossed
Polycoated liner ni
50 micron White PET
TC4
S8040E
Embossed Polycoated
liner ni
Facestock
A white polyester facestock with a smooth, absorbent ink-receptive
topcoat.
Basis Weight:
Caliper:
70g/m2 10% ISO536
0.050 mm 10% ISO534
Adhesive
A general purpose permanent, solvent acrylic based adhesive..
Liner
A super-calendared embossing polycoated white glassine paper
Basis Weight:
Caliper:
108 g/m2 10% ISO536
0.100mm 10% ISO534
Performance data
loop Tack (st,st)-FTM 9: 9.0
20 min 90 Peel (st,st)-FTM 2: 5.5
24 hour 90 Peel (st,st)-FTM 2: 7.0
Minimum Application Temperature: -4C
After labeling 24Hours, Service Temperature Range:-40C~+149C
Adhesive Performance
This is an excellent, general-purpose industrial grade clear adhesive,
featuring high initial tack, ultimate adhesion and low adhesive ooze. It is
resistant to many solvents.
Applications and use
The special grid on the adhesive layer can drive away air which hides
between the label and substrate to ensure the label will not create
bubble. Especially on those conditions, such as the big size label, etc.
This product features excellent tear strength, heat resistance,
dimensional stability, transparency and chemical resistance.
This product is suitable for use in a wide range of durable labeling
applications. The product remains reclosure performance in a
short time.
Conversion/printing
The top coated surface is designed and suitable for all normal printing
techniques. Special formulated inks are normally not necessary.
It can be used for thermal transfer printing.
Ink/ribbon testing is always recommended before production.
This product can be die cut and stripped at high speeds on most web-
fed presses.
Harden treated and sharp dies, preferably in flat-bed, are important to
ensure smooth conversion.
Need avoid too much re-winding tension to causing bleeding.
Shelf life
One year when stored at 23 ± 2°C at 50 ± 5% RH.
Avery Dennison Label and Packaging Materials
32/F., Skyline Tower
39 Wang Kwong Road
Kowloon Bay, Kowloon,
Hong Kong
Tel: +852 2802-9618 | +856 400 828 3797
Warranty
All statements, technical information and recommendations about AVERY DENNISON products are based upon
tests believed to be reliable but but do no constitute a guarantee or warranty. All AVERY DENNISON products
are sold with the understanding that PURCHASER has independently determined the suitability of such products
for its purposes. AVERY DENNISON products are warranted to be free of defects in material or workmanship for
a period of one year from the date of shipment. Any product shown to the satisfaction of AVERY DENNISON
within the time provided to be so defective shall be replaced without charge of AVERY DENNISON may issue
credit in such amount as it seems reasonable however, in no event shall AVERY DENNISON be responsable for
claims beyond the replacement value of the defective product or in any way
All statements, technical information and recommendations about AVERY DENNISON products are based
upon tests believed to be reliable but but do no constitute a guarantee or warranty. All AVERY DENNISON
products are sold with the understanding that PURCHASER has independently determined the suitability of
such products for its purposes. AVERY DENNISON products are warranted to be free of defects in material
or workmanship for a period of one year from the date of shipment. Any product shown to the satisfaction of
AVERY DENNISON within the time provided to be so defective shall be replaced without charge of AVERY
DENNISON may issue credit in such amount as it seems reasonable however, in no event shall AVERY
DENNISON be responsable for claims beyond the replacement value of the defective product or in any way
Spec Code : MZS229
Issue date: January, 2020
商 标 纸 规 格 表
SPECIFICATION
Article Name
Transparent
PET Label
Construction
Code
PO27Z
DATE:2018/09/01
PET
PPB
PET liner
Surface Material
Liner
Article Name
PET
Article Name
PET
Thickness
mm
0.025±5%
Thickness
0.025±5%
Base Weight
g/m2
~
Base Weight
Tensile Strength
kg/25mm
9↑
Tensile Strength
kg/25mm
Elongation
%
70↑
Elongation
%
mm
g/m2
~
~
~
Transparent
Good
Color
Transparent Color
Smoothness
Excellent
Smoothness
Printability
Good
Physical Properties
Adhesive Base
Acrylic AdhesiveRelease Force
g/25mm
3~15
Coating Thickness
mm
0.015±0.002 Weathering Resistance
Good
Dry Coating Weight
g/m2
17±3
Temperature Range
℃
-5~125
Initial Tack
#7/cm
1~20
Solvent Resistance
Excellent
180°Peel Adhesion
kg/25mm
0.6~1.5
Remark:1.Test condition :23℃±2℃,65%±5% R.H.
2.Storage condition:23℃,65% R.H. Shelf Life:one year;
3.Above information is for reference only and should not be as inspection standard.
Valid Period of the Document:2 Years
Form Number: R-04-031-01
SYMBIO (DONGGUAN) CO.,LTD