all | frequencies |
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Manual 1 | Users Manual | 4.39 MiB | ||||
1 |
|
Manual 2 | Users Manual | 3.36 MiB | ||||
1 |
|
Manual 3 | Users Manual | 3.15 MiB | ||||
1 | Attestation Statements | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Operational Description | |||||||
1 | RF Exposure Info | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | Manual 1 | Users Manual | 4.39 MiB |
4030765 Rev 01 DDR2201 Series Residential Gateway Installation and Operation Guide 3-6-2009 Draft 3-6-2009 Draft Please Read Important Please read this entire guide. If this guide provides installation or operation instructions, give particular attention to all safety statements included in this guide. 3-6-2009 Draft Notices Trademark Acknowledgments Scientific Atlanta is a registered trademark of Scientific-Atlanta, Inc. Cisco, the Cisco logo, and Cisco Systems are trademarks or registered trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. All other trademarks shown are trademarks of their respective owners. Publication Disclaimer Cisco Systems, Inc. assumes no responsibility for errors or omissions that may appear in this publication. We reserve the right to change this publication at any time without notice. This document is not to be construed as conferring by implication, estoppel, or otherwise any license or right under any copyright or patent, whether or not the use of any information in this document employs an invention claimed in any existing or later issued patent. Copyright 2009 Cisco Systems, Inc. All rights reserved. Printed in the United States of America. Information in this publication is subject to change without notice. No part of this publication may be reproduced or transmitted in any form, by photocopy, microfilm, xerography, or any other means, or incorporated into any information retrieval system, electronic or mechanical, for any purpose, without the express permission of Cisco Systems, Inc. 3-6-2009 Draft Contents IMPORTANT SAFETY INSTRUCTIONS FCC Compliance About This Guide vii xiii xvii Chapter 1 Introducing the DDR2201 Series Residential Gateway 1 Benefits and Features .............................................................................................................. 2 What's On the Front Panel?.................................................................................................... 4 What's On the Back Panel? ..................................................................................................... 6 7 Chapter 2 Installing the Residential Gateway Mounting the Residential Gateway Vertically..................................................................... 8 Mounting the Residential Gateway to the Wall .................................................................. 9 Connecting Your Computer to the Residential Gateway................................................. 10 Connecting the DSL Interface ..............................................................................................12 15 Chapter 3 Configuration and Operation Logging In to the Residential Gateway ..............................................................................17 System Summary ................................................................................................................... 18 Setting Up Your System with the Setup Wizard ............................................................... 19 Setting System Date and Time ............................................................................................. 24 Setting Password.................................................................................................................... 25 DHCP Leases.......................................................................................................................... 26 WAN Information.................................................................................................................. 27 Route Information.................................................................................................................. 28 ARP Information.................................................................................................................... 29 CPU Information.................................................................................................................... 30 Memory Information............................................................................................................. 31 LAN Statistics......................................................................................................................... 32 WAN Statistics ....................................................................................................................... 33 ATM Statistics......................................................................................................................... 34 Tools Update Software..........................................................................................................35 Updating Software................................................................................................................. 36 Settings Backup ...................................................................................................................... 38 Update Settings ...................................................................................................................... 40 4030765 Rev 01 iii 3-6-2009 Draft Contents Restore Default Settings........................................................................................................ 42 Saving the Configuration for the Residential Gateway.................................................... 44 Time Settings .......................................................................................................................... 46 Access Control Services ........................................................................................................ 49 IP Access Control ................................................................................................................... 51 Password Access to the Residential Gateway.................................................................... 54 Http Server Port ..................................................................................................................... 57 System Log Configuration.................................................................................................... 59 System Logs............................................................................................................................ 64 Print Server Settings .............................................................................................................. 66 Clone MAC Addresses.......................................................................................................... 69 Voice SIP Basic Configuration.............................................................................................. 72 Voice SIP Advanced Configuration .................................................................................... 76 USB File List............................................................................................................................ 79 81 Chapter 4 DSL Configuration DSL Summary ........................................................................................................................ 82 DSL Statistics .......................................................................................................................... 83 DSL Diagnostics ..................................................................................................................... 85 DSL Settings............................................................................................................................ 87 ADSL Tone Settings............................................................................................................... 89 DSL Advanced Settings ........................................................................................................ 91 Chapter 5 Home Network Configuration 93 Client Summary ..................................................................................................................... 94 WAN Quick Setup ................................................................................................................. 97 Set Top Box Quick Setup.....................................................................................................101 LAN Setup ............................................................................................................................ 103 Wireless Summary............................................................................................................... 106 Wireless Basic ....................................................................................................................... 107 Wireless Security.................................................................................................................. 111 Wireless MAC Filtering ......................................................................................................116 Wireless Bridge .................................................................................................................... 120 Wireless Station List ............................................................................................................ 121 HPNA Information..............................................................................................................123 HPNA Statistics Information ............................................................................................. 125 Home Monitoring ................................................................................................................126 127 Chapter 6 Security Configuration MAC Filtering Setup ........................................................................................................... 128 Incoming IP Filtering........................................................................................................... 134 Outgoing IP Filtering........................................................................................................... 141 Parental Control Setup - Filtering Function..................................................................... 146 iv 4030765 Rev 01 3-6-2009 Draft Contents URL Filtering Function ....................................................................................................... 151 Stateful Packet Inspection................................................................................................... 156 Local Certificates.................................................................................................................. 158 Trusted CA Certificates....................................................................................................... 163 167 Chapter 7 Advanced Configuration Upstream Quality of Service .............................................................................................. 168 Remote Management........................................................................................................... 171 Port Mapping........................................................................................................................ 173 Creating Certificates ............................................................................................................ 176 Virtual Servers Setup........................................................................................................... 178 Port Triggering Setup..........................................................................................................182 DMZ Host Setup .................................................................................................................. 186 DNS Server Configuration.................................................................................................. 187 Dynamic DNS....................................................................................................................... 188 Default Gateway Routing ................................................................................................... 191 Internet Group Management Protocol..............................................................................193 IPSec Settings........................................................................................................................ 194 197 Chapter 8 Customer Information Customer Support................................................................................................................ 198 Return Products for Repair................................................................................................. 200 4030765 Rev 01 v 3-6-2009 Draft IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS The servicing instructions in this notice are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions, unless you are qualified to do so. Notice lattention des installateurs de rseaux cbls Les instructions relatives aux interventions dentretien, fournies dans la prsente notice, sadressent exclusivement au personnel technique qualifi. Pour rduire les risques de chocs lectriques, neffectuer aucune intervention autre que celles dcrites dans le mode d'emploi et les instructions relatives au fonctionnement, moins que vous ne soyez qualifi pour ce faire. 4030765 Rev 01 vii 3-6-2009 Draft IMPORTANT SAFETY INSTRUCTIONS Mitteilung fr CATV-Techniker Die in dieser Mitteilung aufgefhrten Wartungsanweisungen sind ausschlielich fr qualifiziertes Fachpersonal bestimmt. Um die Gefahr eines elektrischen Schlags zu reduzieren, sollten Sie keine Wartungsarbeiten durchfhren, die nicht ausdrcklich in der Bedienungsanleitung aufgefhrt sind, auer Sie sind zur Durchfhrung solcher Arbeiten qualifiziert. Aviso a los instaladores de sistemas CATV Las instrucciones de reparacin contenidas en el presente aviso son para uso exclusivo por parte de personal de mantenimiento cualificado. Con el fin de reducir el riesgo de descarga elctrica, no realice ninguna otra operacin de reparacin distinta a las contenidas en las instrucciones de funcionamiento, a menos que posea la cualificacin necesaria para hacerlo. 20080814_Installer800_Intl viii 4030765 Rev 01 3-6-2009 Draft IMPORTANT SAFETY INSTRUCTIONS U.S. Patents A patent notice is affixed to this product. In addition, the product may also be covered by one or more of the following patents:
4,498,169, 4,692,919, 4,748,667; 4,829,569; 4,866,770; 4,885,775; 4,888,799; 4,890,319; 4,922,456; 4,922,532; 4,924,498;
4,965,534; 4,991,011; 5,003,384; 5,012,510; 5,029,207; 5,045,816; 5,053,883; 5,054,071; 5,058,160; 5,142,575; 5,142,690;
5,146,526; 5,155,590; 5,214,390; 5,225,902; 5,225,925; 5,235,619; 5,237,610; 5,239,540; 5,241,610; 5,247,364; 5,255,086;
5,257,403; 5,267,071; 5,270,809; 5,271,041; 5,272,752; 5,282,028; 5,285,497; 5,287,351; 5,301,028; 5,309,514; 5,317,391;
5,319,709; 5,341,425; 5,347,388; 5,347,389; 5,357,276; 5,359,601; 5,361,156; 5,367,571; 5,379,141; 5,379,145; 5,381,481;
5,390,337; 5,400,401; 5,406,558; 5,418,782; 5,420,866; 5,420,923; 5,425,101; 5,428,404; 5,430,568; 5,434,610; 5,436,749;
5,438,370; 5,440,632; 5,442,472; 5,455,570; 5,457,701; 5,471,492; 5,477,199; 5,477,262; 5,477,282 5,477,370; 5,481,389;
5,481,542; 5,485,221; 5,493,339; 5,497,187; 5,500,758; 5,502,499; 5,506,904; 5,519,780; 5,539,822; 5,550,825; 5,579,055;
5,579,057; 5,583,562; 5,592,551; 5,596,606; 5,600,378; 5,602,933; 5,640,388; 5,657,414; 5,675,575; 5,684,876; 5,715,515;
5,724,525; 5,734,822; 5,740,300; 5,742,677; 5,754,940; 5,757,416; 5,771,064; 5,774,859; 5,825,829; 5,826,167; 5,850,305;
5,854,703; 5,870,474; 5,892,607; 5,920,626; 5,923,755; 5,930,024; 5,930,515; 5,937,067; 5,963,352; 5,966,163; 5,982,424;
5,991,139; 5,999,207; 6,005,631; 6,005,938; 6,016,163; 6,028,941; 6,029,046; 6,052,384; 6,055,244; 6,072,532; 6,105,134;
6,148,039; 6,157,719; 6,188,729; 6,195,389; 6,212,278; 6,215,530; 6,219,358; 6,240,103; 6,243,145; 6,246,767; 6,252,964;
6,272,226; 6,292,081; 6,292,568; 6,320,131; 6,374,275; 6,405,239; 6,411,602; 6,417,949; 6,424,714; 6,424,717; 6,433,906;
6,438,139; 6,463,586; 6,467,091; 6,476,878; 6,493,876; 6,510,519; 6,516,002; 6,516,412; 6,526,508; 6,538,595; 6,546,013;
6,560,340; 6,567,118; 6,570,888; 6,622,308; 6,629,227; 6,664,984; 6,667,994; 6,671,879; 6,674,967; 6,678,891; 6,714,598;
6,721,352; 6,721,956; 6,725,459; 6,738,982; 6,744,892; 6,744,967; 6,751,271; 6,760,918; 6,795,972; 6,802,077; 6,804,708;
6,811,447; 6,817,028; 6,822,972; 6,823,385; 6,832,386; 6,845,106; 6,868,473; 6,874,075; 6,889,191; 6,909,471; 6,917,622;
6,917,628; 6,922,412; 6,927,806; 6,928,656; 6,931,058; 6,937,729; 6,969,279; 6,971,008; 6,971,121; 6,978,310; 6,986,156;
6,988,900; 6,996,838; 7,010,801; 7,053,960; 7,065,213; 7,069,578; 7,069572; D348065; D354959; D359737; D363932;
D390217; D434753; D507240; D507535; D513407; D516518; RE36368; RE36988 20070417 Patents IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the Follow all instructions. manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-
type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 4030765 Rev 01 ix 3-6-2009 Draft IMPORTANT SAFETY INSTRUCTIONS 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as a power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Power Source Warning A label on this product indicates the correct power source for this product. Operate this product only from an electrical outlet with the voltage and frequency indicated on the product label. If you are uncertain of the type of power supply to your home or business, consult your service provider or your local power company. The AC inlet on the unit must remain accessible and operable at all times. Ground the Product WARNING: Avoid electric shock and fire hazard! If this product connects to coaxial cable wiring, be sure the cable system is grounded (earthed). Grounding provides some protection against voltage surges and built-up static charges. WARNING: Avoid electric shock and fire hazard! Do not locate an outside antenna system in the vicinity of overhead power lines or power circuits. Touching power lines or circuits might be fatal. Protect the Product from Lightning In addition to disconnecting the AC power from the wall outlet, disconnect the signal inputs. Verify the Power Source from the On/Off Power Light When the on/off power light is not illuminated, the apparatus may still be connected to the power source. The light may go out when the apparatus is turned off, regardless of whether it is still plugged into an AC power source. Eliminate AC Mains Overloads WARNING: Avoid electric shock and fire hazard! Do not overload AC mains, outlets, extension cords, or integral convenience receptacles. For products that require battery power or other power sources to operate them, refer to the operating instructions for those products. x 4030765 Rev 01 3-6-2009 Draft IMPORTANT SAFETY INSTRUCTIONS Provide Ventilation and Select a Location Remove all packaging material before applying power to the product. Do not place this apparatus on a bed, sofa, rug, or similar surface. Do not place this apparatus on an unstable surface. Do not install this apparatus in an enclosure, such as a bookcase or rack, unless the installation provides proper ventilation. Do not place entertainment devices (such as VCRs or DVDs), lamps, books, vases with liquids, or other objects on top of this product. Do not block ventilation openings. Protect from Exposure to Moisture and Foreign Objects WARNING: Avoid electric shock and fire hazard! Do not expose this product to liquids, rain, or moisture. Do not expose this product to dripping or splashing liquids, rain, or moisture. Objects filled with liquids, such as vases, should not be placed on this apparatus. WARNING: Avoid electric shock and fire hazard! Unplug this product before cleaning. Do not use a liquid cleaner or an aerosol cleaner. Do not use a magnetic/static cleaning device (dust remover) to clean this product. WARNING: Avoid electric shock and fire hazard! Never push objects through the openings in this product. Foreign objects can cause electrical shorts that can result in electric shock or fire. Service Warnings WARNING: Avoid electric shock! Do not open the cover of this product. Opening or removing the cover may expose you to dangerous voltages. If you open the cover, your warranty will be void. This product contains no user-serviceable parts. Check Product Safety Upon completion of any service or repairs to this product, the service technician must perform safety checks to determine that this product is in proper operating condition. Protect the Product When Moving It Always disconnect the power source when moving the apparatus or connecting or disconnecting cables. Telephone Equipment Notice When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric stock and injury to persons, including the following:
1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry 4030765 Rev 01 xi 3-6-2009 Draft IMPORTANT SAFETY INSTRUCTIONS tub, in a wet basement or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak. SAVE THESE INSTRUCTIONS 20081112_Modem DSL_Safety xii 4030765 Rev 01 3-6-2009 Draft FCC Compliance United States FCC Compliance FCC Compliance This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against such interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the service provider or an experienced radio/television technician for help. Any changes or modifications not expressly approved by Cisco Systems, Inc., could void the user's authority to operate the equipment. The information shown in the FCC Declaration of Conformity paragraph below is a requirement of the FCC and is intended to supply you with information regarding the FCC approval of this device. The phone numbers listed are for FCC-related questions only and not intended for questions regarding the connection or operation for this device. Please contact your service provider for any questions you may have regarding the operation or installation of this device. Declaration of Conformity This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: 1) the device may not cause harmful interference, and 2) the device must accept any interference received, including interference that may cause undesired operation. DDR2201 Residential Gateway Model: DDR2201 Manufactured by:
Cisco Systems, Inc. 5030 Sugarloaf Parkway Lawrenceville, Georgia 30044 USA Telephone: 770-236-1077 Canada EMI Regulation This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la class B est conforme la norme NMB-003 du Canada. 4030765 Rev 01 xiii 3-6-2009 Draft FCC Compliance FCC Part 68 The Federal Communications Commission (FCC) of the United States restricts specific uses of modems, and places registration responsibilities on both the manufacturer and the individual user. 1 2 Notification to the telephone company is no longer required prior to connecting The modem may not be connected to a party line or to a coin-operated telephone. registered equipment, but upon request from the telephone company, the user shall tell the telephone company which line the equipment is connected to as well as the registration number and ringer equivalence number of the registered protective circuitry. FCC information is printed on a label on the bottom of the modem. IC (Industry Canada) Notice Notice: The Industry Canada (formerly Canadian Department of Communications) label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational, and safety requirements. The department does not guarantee the equipment will operate to the user's satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. In some cases, the company's inside wiring associated with a single-line individual service may be extended by means of a certified connector assembly (telephone extension cord). The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. CAUTION:
Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate. Radiation Exposure Statements Note: This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 7.9 inches (20 cm) between the radiator and your body. US This system has been evaluated for RF exposure for humans in reference to ANSI C 95.1
(American National Standards Institute) limits. The evaluation was based on evaluation per ANI C 95.1 and FCC OET Bulletin 65C rev 01.01. The minimum separation distance from the antenna to general bystander is 7.9 inches (20 cm) to maintain compliance. xiv 4030765 Rev 01 3-6-2009 Draft FCC Compliance Canada This system has been evaluated for RF exposure for humans in reference to ANSI C 95.1 limits. The evaluation was based on evaluation per RSS-102 Rev 2. The minimum separation distance from the antenna to general bystander is 7.9 inches (20 cm) to maintain compliance. EU This system has been evaluated for RF exposure for humans in reference to the ICNIRP
(International Commission on Non-Ionizing Radiation Protection) limits. The evaluation was based on the EN 50385 Product Standard to Demonstrate Compliance of Radio Base Stations and Fixed Terminals for Wireless Telecommunications Systems with basic restrictions or reference levels related to Human Exposure to Radio Frequency Electromagnetic Fields from 300 MHz to 40 GHz. The minimum separation distance from the antenna to general bystander is 20 cm (7.9 inches). Australia This system has been evaluated for RF exposure for humans as referenced in the Australian Radiation Protection standard and has been evaluated to the ICNIRP (International Commission on Non-Ionizing Radiation Protection) limits. The minimum separation distance from the antenna to general bystander is 20 cm (7.9 inches). 20081121 FCC DSL_Dom and Intl 4030765 Rev 01 xv 3-6-2009 Draft 3-6-2009 Draft FCC Compliance FCC REQUIREMENTS This equipment complies with Part 68 of FCC Rules and the requirements adopted by the ACTA.. On the bass unit of this equipment is a label that contains, among other information, a product identifier in the format US: GEMDL01BDDR2201V1. If requested, this number must be provided to the telephone company. The REN is useful to determine the quantity of devices you may connect to your telephone line and still have those devices ring when your telephone number is called. In most, but not all areas, the sum of the REN of all devices connected to one line should not exceed five (5.0). To be certain of the number of devices you may connect to your line, as determined by the REN, you should contact your local telephone company to determine the maximum REN for your calling area. If your equipment causes harm to the telephone network, the telephone company may discontinue your service temporarily. If possible, they will notify you in advance. If advance notice is not practical, you will be notified as soon as possible. You will be informed of your right to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operations or procedures that could affect the proper functioning of your equipment. If they do, you will be notified in advance to give you an opportunity to maintain uninterrupted telephone service. If you experience trouble with this telephone equipment, please contact the following address and phone number for information on obtaining service or repairs:
The telephone company may ask that you disconnect this equipment from the network until the problem has been corrected or until you are sure that the equipment is not malfunctioning. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs. xiv 4030765 Rev 01 About This Guide About This Guide Introduction This installation and operation guide applies to the DDR2201 series residential gateway. The DDR2201 series residential gateway connects to the DSL network in your home to deliver data, video, voice, and wired (Ethernet) or wireless gateway capabilities all from one device. Use this guide to install the residential gateway in your home. Purpose This document provides the information you need to install and operate the DDR2201 series residential gateway. Audience This guide is written for two audiences. Subscribers who have purchased a residential gateway and want to experience high-speed Internet and high-quality digital telephone service can use this guide for background information and basic operation. This guide is also written for the the service provider's installers who initially set up and configure residential gateway in the subscriber's home. Most subscribers will not want to use the more advanced functionality, and future releases of this software will prevent subscriber access to these screens. Document Version This is the first formal release of this document. 4030765 Rev 01 xvii 3-6-2009 Draft 1 Chapter 1 Introducing the DDR2201 Series Residential Gateway Introduction Imagine walking through your home and accessing the Internet from nearly any room. The DDR2201 series residential gateway connects to the DSL line in your home and to your home network to deliver data, video, voice, and wired (Ethernet) or wireless gateway capabilities all from one device. You can use your residential gateway to connect to a variety of devices in the home or small office. The residential gateway supports high-speed data access, VoIP services, and features that support Internet Protocol TV (IPTV) deployment. Use this chapter to learn about your residential gateway. In This Chapter Benefits and Features ............................................................................. 2 What's On the Front Panel?................................................................... 4 What's On the Back Panel? .................................................................... 6 4030765 Rev 01 1 3-6-2009 Draft Chapter 1 Introducing the DDR2201 Series Residential Gateway Benefits and Features Your residential gateway offers the following benefits and features:
Full routing functionality. The gateway router provides broadband transfer speeds available between your home network and the service provider's network for multi-user sharing. The high-performance router distributes data seamlessly to all devices in the network without a noticeable effect to performance or speed. True firewall capability. The gateway firewall includes both standard NAT/PAT security and Stateful Packet inspection to defend against external attacks. High-quality data, voice, and IPTV services. The gateway combines an ADSL2+
bonded modem, 4-port Ethernet switch, HPNA 3.0 bridge and router functionality with optional VoIP and WiFi into one integrated platform. Compact design. The gateway is compact enough to sit on a desktop and versatile enough to be wall mounted in an out of the way location. The residential gateway can also stand vertically. Flexible networking. The gateway combines a variety of home networking technologies in one box: Ethernet, USB, 802.11g wireless, and HPNA.
- Ethernet. Ethernet is a network standard for data transmission using either coaxial or twisted pair cable over a LAN (local area network). The information can be transmitted at speeds of 10 to 100 Mbps. If the home or office is wired for Ethernet, use one of the four LAN interfaces on the gateway to create a broadband network.
- USB. The USB port allows you to directly connect a computer or other network capable device.
- 802.11g Wireless. The gateway includes an integrated wireless access point that allows you to roam wirelessly throughout your home or office. With the high-power wireless technology of the DDR2201, wireless "coldspots" are virtually eliminated in the home.
- HPNA. The HPNA interface allows you to easily share digital services throughout the home using the existing coaxial cable to distribute content such as video, music, and games. HPNA offers the following benefits:
Multi-room DVR. Subscribers can record and share digital services simultaneously in every room. Multi-room gaming. Subscribers can access games from various locations in the home and play simultaneously. PC to TV. Subscribers can access data and video services over the HPNA coaxial network throughout the home. 2 4030765 Rev 01 3-6-2009 Draft ADSL2+. Asymmetric Digital Subscriber Line (ADSL) provides high-access transmission speeds for delivery of video, voice, and data services to homes over ordinary copper telephone wire. Benefits and Features 4030765 Rev 01 3 3-6-2009 Draft Chapter 1 Introducing the DDR2201 Series Residential Gateway What's On the Front Panel?
The front panel of your residential gateway provides LED status indicators that indicate the operational state of your gateway. Refer to the following diagram for a description of the front panel. 1 wifi-secAllows you to automatically configure the wireless device in the home. The WIRELESS SECURITY SETUP LED shows whether automatic wireless security is on or off 2 POWERIlluminates solid green to indicate that AC power is being applied to the residential gateway 3 LAN1 - LAN4Illuminates solid green to indicate that an Ethernet carrier is present and blinks to indicate that Ethernet data is being transferred between the PC and the residential gateway 4 USB/PCIlluminates solid green to indicate that a USB carrier is present and blinks to indicate that USB data is being transferred between the PC and the residential gateway 5 USB/DEVICEIlluminates solid green to indicate that a USB carrier is present and blinks to indicate that USB data is being transferred between the connected USB device and the residential gateway 6 WIRELESSIlluminates solid green when the wireless access point is enabled and operational and blinks to indicate that wireless data is being transferred between the PC and the residential gateway. The LED is off when the wireless access point is disabled by the user 7 HPNAIlluminates solid when linked to another HPNA device and blinks when HPNA activity occurs 8 TEL 1 and TEL 2TEL 1 illuminates solid green when telephony service is enabled. Blinks when line 1 is in use. TEL2 illuminates solid green when telephony service is enabled. Blinks when line 2 is in use 9 DSL/WANIndicates whether a DSL signal is acquired (or trained). The LED indicators mean the following status:
Off. Not trained. Blinking. In training. Solid. Trained. 4 4030765 Rev 01 3-6-2009 Draft 10 INTERNETIndicates wide area network (WAN) traffic. The LED indicators mean the following status:
What's On the Front Panel?
Solid. IP is connected. Blinking. WAN interface has activity. Off. No Internet connection. 4030765 Rev 01 5 3-6-2009 Draft Chapter 1 Introducing the DDR2201 Series Residential Gateway What's On the Back Panel?
Refer to the following diagram for a description of the back panel components. Important! Do not connect your PC to both the Ethernet and USB ports at the same time. Your modem will not function properly if both the Ethernet and USB ports are connected to your PC at the same time. 1 POWERConnects the residential gateway to the AC power plug that is provided with your residential gateway 2 On and Off SwitchPowers the residential gateway on and off 3 RESETActivating this switch resets the residential gateway. Pressing this switch for more than 10 seconds resets the device to factory default values and resets the residential gateway 4 PSTNConnects to the home telephone wiring and is used as a backup to voice over IP (VoIP) service in the event of a power outage to the residential gateway 5 TEL 1 and TEL 2RJ-11 telephone ports connect to home telephone wiring to conventional telephones or fax machines 6 HPNAConnects to the coaxial cable wiring in the house for data and video distribution 7 LAN 1-LAN 3 W/LAN 4Four RJ-45 Ethernet ports connect as follows:
LAN 1 through 3 connect to the Ethernet port on your PC or your home network W/LAN 4 connects to the Ethernet port on your PC if used as a LAN port or optionally as an Ethernet wide area network (WAN) port that connects to the service provider network 8 USB DEVICE12 Mbps USB port connects to the USB port on your device such as a flash drive or digital camera 9 DSLRJ-11 port connects to the DSL line from the service provider 10 ANTENNAReceives and transmits data packets to wireless devices 6 4030765 Rev 01 3-6-2009 Draft 2 Chapter 2 Installing the Residential Gateway You can install the residential gateway in your home office and access the Internet from your kitchen computer to get your favorite recipe. Use this chapter to properly install your residential gateway and to connect the residential gateway to your computer and other devices in your home. In This Chapter Mounting the Residential Gateway Vertically ................................... 8 Mounting the Residential Gateway to the Wall ................................. 9 Connecting Your Computer to the Residential Gateway................ 10 Connecting the DSL Interface ............................................................. 12 4030765 Rev 01 7 3-6-2009 Draft Chapter 2 Installing the Residential Gateway Mounting the Residential Gateway Vertically Some installations may require that you place the residential gateway in a vertical position. Use proper care when installing the residential gateway in a vertical position. Be sure that the housing of the residential gateway is vertical and that the stand is extended as shown in the following illustration:
8 4030765 Rev 01 3-6-2009 Draft Mounting the Residential Gateway to the Wall Mounting the Residential Gateway to the Wall The following illustration shows the location and dimensions of the wall-mounting slots on the bottom of the residential gateway. Use the information on this page as a guide for mounting your residential gateway to the wall. 4030765 Rev 01 9 3-6-2009 Draft Chapter 2 Installing the Residential Gateway Connecting Your Computer to the Residential Gateway You can connect a computer to the residential gateway using one of the following methods:
Ethernet Connection Wireless Connection Note: These instructions describe a PC connection. You could also connect another type of device with a wireless interface. See the owner's manual that came with the device for instructions. Connecting the Computer with an Ethernet Connection Complete these steps to connect the computer with an Ethernet connection. 1 Connect the power adapter that came with the residential gateway to the POWER port on the residential gateway and to an electrical outlet. 2 Power on the residential gateway. After the residential gateway has completed its startup process, the POWER LED on the front panel of the residential gateway should be green. 3 Connect the Ethernet cable provided with the residential gateway from any available Ethernet port (LAN 1 through LAN 4) on the gateway to the Ethernet port on the computer. 4 Connect the gray cable provided with the residential gateway from the DSL port on the gateway to a telephone wall jack. See Connecting the DSL Interface (on page 12) for more information. 10 4030765 Rev 01 3-6-2009 Draft Connecting Your Computer to the Residential Gateway Connecting the Computer with a Wireless Connection A wireless connection requires a wireless-enabled notebook or a computer with an 802.11b/g wireless network adapter installed. Complete these steps to connect the computer with a wireless connection. 1 Connect the power adapter that came with the residential gateway to the POWER port on the residential gateway and to to an electrical outlet. 2 Power on the residential gateway. After the residential gateway has completed its startup process, the POWER light on the front panel of the residential gateway should be green. 3 Connect the gray cable provided with the residential gateway from the DSL port on the residential gateway to a telephone wall jack. See Connecting the DSL Interface (on page 12) for more information. Follow the instructions in your owner's manual for your PC or laptop to activate the wireless connection. 4 4030765 Rev 01 11 3-6-2009 Draft Chapter 2 Installing the Residential Gateway Connecting the DSL Interface Now that you have connected the gateway to power and you have made the LAN connections, you can connect the DSL interface (connection to the wall jack) as shown in the following illustration . This illustration shows all of the attached devices connected to the residential gateway. For IPTV service, you must connect the residential gateway to an IP set-top. You can connect to an IP set-top using an Ethernet or coaxial connection. Ethernet Connection Complete the following steps to connect the residential gateway to an IP set-top through Ethernet for IPTV service. 1 Ensure that the residential gateway is powered on. 2 Connect an Ethernet cable from the Ethernet port (LAN 1 through LAN 4) on the gateway to the Network port on the set-top. 3 Power on the IP set-top. 12 4030765 Rev 01 3-6-2009 Draft Connecting the DSL Interface Coaxial Connection Complete the following steps to connect the residential gateway to an IP set-top with coaxial cable for IPTV service. 1 Ensure that the residential gateway is powered on. 2 Connect a coaxial cable from the HPNA port on the gateway to the TO WALL
(Video In) port on the set-top. 3 Power on the IP set-top. 4030765 Rev 01 13 3-6-2009 Draft 3-6-2009 Draft 3 Chapter 3 Configuration and Operation The DDR2201 residential gateway contains web pages that show the current status of the residential gateway and that allow you to configure the device. Advanced users can configure parameters such as DHCP (Dynamic Host Configuration Protocol), wireless network settings, port forwarding, parental control, and so forth. This section provides information that you can use to configure and interact with the residential gateway through the user interface.The screens shown in this guide represent the default values for the device. Use this chapter to help you check the status of the residential gateway and to configure the device. 4030765 Rev 01 15 3-6-2009 Draft Chapter 3 Configuration and Operation In This Chapter Logging In to the Residential Gateway ............................................. 17 System Summary .................................................................................. 18 Setting Up Your System with the Setup Wizard.............................. 19 Setting System Date and Time ............................................................ 24 Setting Password................................................................................... 25 DHCP Leases......................................................................................... 26 WAN Information................................................................................. 27 Route Information................................................................................. 28 ARP Information................................................................................... 29 CPU Information................................................................................... 30 Memory Information............................................................................ 31 LAN Statistics........................................................................................ 32 WAN Statistics ...................................................................................... 33 ATM Statistics ....................................................................................... 34 Tools Update Software......................................................................... 35 Updating Software................................................................................ 36 Settings Backup..................................................................................... 38 Update Settings ..................................................................................... 40 Restore Default Settings....................................................................... 42 Saving the Configuration for the Residential Gateway................... 44 Time Settings ......................................................................................... 46 Access Control Services ....................................................................... 49 IP Access Control.................................................................................. 51 Password Access to the Residential Gateway .................................. 54 Http Server Port .................................................................................... 57 System Log Configuration................................................................... 59 System Logs........................................................................................... 64 Print Server Settings ............................................................................. 66 Clone MAC Addresses......................................................................... 69 Voice SIP Basic Configuration ............................................................ 72 Voice SIP Advanced Configuration ................................................... 76 USB File List........................................................................................... 79 16 4030765 Rev 01 3-6-2009 Draft Logging In to the Residential Gateway The default configuration of the residential gateway uses IP address 192.168.1.254. If you have connected the residential gateway correctly and you have properly configured your computer, use the following steps to log in to the residential gateway as an administrator. Note: A non-administrative user may need a different user name and password for logging in to the residential gateway. These users can access non-privileged information. 1 On your PC, open the web browser that you prefer to use. 2 In the address field, enter the following IP address: 192.168.1.254. The system prompts you to enter your user name and password. 3 Enter admin for both the user name and password. The residential gateway opens with the System Summary page in the forefront. You an use this web interface to check the status of the residential gateway and to configure parameters. Note: The screens shown in this guide represent the default values for the device. 4030765 Rev 01 17 3-6-2009 Draft Chapter 3 Configuration and Operation System Summary The System Summary screen provides a summary of the software used by the residential gateway and indicates the current status of the DSL connection. You can use this screen to find hardware and software information as well as physical and IP layer information. The LogOut button on this screen allows you to quickly log out and log back in without opening a browser. Path: System > Summary Q. to reviewers: Need User Interface with Setup Wizard removed. 18 4030765 Rev 01 3-6-2009 Draft Setting Up Your System with the Setup Wizard Setting Up Your System with the Setup Wizard The Setup Wizard is a step-by-step sequence to set up your residential gateway for the first time to ensure proper operation. The wizard combines the various tasks into one convenient tool to reduce configuration time. The wizard requires that you make a few selections along the process. Your selections will depend on your service provider. To set up your system with the Setup Wizard, complete the following steps. 1 Click System on the main screen. The System Summary window opens. 4030765 Rev 01 19 3-6-2009 Draft Chapter 3 Configuration and Operation 2 Click Setup Wizard at the top of the screen. The (Setup Wizard 1/4) ------ Clone MAC screen opens. 3 Do you want to enable the clone MAC function? MAC cloning enables you to change the MAC address of the residential gateway to match the MAC address of your PC or any service provider supplied MAC address. If you do not enable MAC cloning, the default MAC address of the residential gateway is used. If yes, select the Enable clone MAC address check box. A field appears for you to enter the MAC address you want to clone. Go to step 4. 4 If no, clear the Enable clone MAC address check box. Go tp step 5. In the MAC address field, type in a MAC address or click Load client PCMAC to load your PC's MAC address. 20 4030765 Rev 01 3-6-2009 Draft Setting Up Your System with the Setup Wizard 5 Click Next. The (Setup Wizard 2/4 ------- Time Settings) screen opens. This screen lets you synchronize the time on the residential gateway with an Internet time server. If you do not syncrhonize the time with an Internet time server, the residential gateway will use its default time. 6 Do you want to automatically synchronize the time on the residential gateway with an Internet Time server?
If yes, select the Automatically synchronize with Internet time servers check box. Go to step 7. If no, clear the Automatically synchronize with Internet time servers check box. The residential gateway will get its time from its own internal clock. Go to step 9. In the First NTP time server field, select the Network Time Protocol (NTP) time server from the drop-down list that you want the residential gateway to check first to get its time. In the Second NTP time server field, select the time server from the drop-down list that you want the to use as a backup server for the residential gateway to get its time. In the Time zone offset field, select your time zone from the drop-down list. 7 8 9 4030765 Rev 01 21 3-6-2009 Draft Chapter 3 Configuration and Operation 10 Click Next. The (Setup Wizard 3/4) ------- Wireless Basic Settings screen opens. The residential gateway offers wireless capability by default. This screen allows you to configure the wireless settings to work with the devices in your environment. 11 Do you want to enable wireless?
If yes, select the Enable Wireless check box. If no, clear the Enable Wireless check box. The wireless capability of the residential gateway is disabled, and all devices communicating with rg will have to be hard wired. 12 Do you want to prevent other wireless devices from communicating over the wireless network with the residential gateway?
If yes, select the Hide Access Point check box. If no, clear the Hide Access Point check box. No devices will be locked out from communicating with the residential gateway over the wireless network. 13 In the SSID field, enter the service set identifier (SSID). 14 In the channel field, select the channel from the drop-down list to select the frequency that you will use for wireless communication. Values are auto and channels 1 through 11. 15 In the WIreless Mode field, select one of the following modes:
802.11g & 802.11b 22 4030765 Rev 01 3-6-2009 Draft Setting Up Your System with the Setup Wizard 802.11g only 802.11b only 16 In the 54g Protection field, select Auto to enable 54g protection or Off to disable the function. The Auto option will use RTS/CTS to improve 802.11g performance in mixed 802.11g/802.11b networks. Turning the protection off maximizes 802.11g throughput under most conditions. 17 Click Next. The (Setup Wizard 4/4) ----- Wireless Security Settings screen opens. 18 In the Select SSID field, select the SSID from the drop-down list that you want to use. 19 In the Network Authentication field, select one of the following authentication methods from the drop-down list:
Open. All devices may access the wireless network. (Preferred Option). Shared. Only devices configured with the 64 bit or 128 Bit Key may access the wireless network. WPA-PSK. (Wi-Fi Protected Access-Pre-Shared Key) will secure your network by encryption of all traffic using a pre-shared dynamic key. 20 Do you want to enable WEP Encryption?
If yes, in the WEP Encryption field, select Enabled from the drop-down list. If no, in the WEP Encryption field, select Disabled from the drop-down list. 21 Click Save/Reboot to save the changes you made. Need more detail on result. What happens. 4030765 Rev 01 23 3-6-2009 Draft Chapter 3 Configuration and Operation Setting System Date and Time When you first set up your system with the wizard, you set your systems date and time. At a later time, you may need to reset the date and time, and you can use the following procedure. To set the system date and time, complete the following steps. 1 Click System on the main screen. The System Summary window opens. 2 Under the Admin section on the screen, click NTP Server Setting. The Time Settings screen opens. 3 Make sure the Automatically synchronize with Internet time servers check box is 4 5 6 checked. In the First NTP time server field, select clock.fmt.he.net from the drop-down list. In the Second NTP time server field, select time.nist.gov from the drop-down list. In the Time zone offset field, select the time zone that you want to use from the drop-down list. 7 Click Save/Apply to save your settings. 24 4030765 Rev 01 3-6-2009 Draft Setting Password Setting Password To set the password for the residential gateway, complete the following steps. 1 Click System on the main screen. The System Summary window opens. 2 Under the Admin section on the screen, click Password Setting. The Access Control -- Password screen opens. 3 In the Username field, select one of the following options for the user name:
admin. Allows unrestricted access to change and view the configuration of the residential gateway. This login allows access to privileged information. support. Allows an ISP technician to access your residential gateway for maintenance and to run diagnostics user. Allows access to view configuration settings and statistics, as well as, to update the residential gateway's software. In the Old Password field, enter the old password you have been using. In the New Password field, enter the new password. In the Confirm Password field, enter the new password again to confirm it. 4 5 6 7 Click Save/Apply to save your user name and password. 4030765 Rev 01 25 3-6-2009 Draft Chapter 3 Configuration and Operation DHCP Leases The DHCP Leases screen displays the Dynamic Host Configuration Protocol (DHCP) table. This screen shows a mapping of hosts (shown by their MAC addresses) and their assigned IP addresses. The DHCP server for the residential gateway assigns these IP addresses to the devices. The screen also shows when the lease for the IP address expires. Path: System > Details > LAN DHCP Q. to Reviewers: We need a populated screen 26 4030765 Rev 01 3-6-2009 Draft WAN Information WAN Information The WAN Info screen provides information about the ADSL2+ wide area network
(WAN) parameters and status. You can use this screen to check the ADSL2+
connection. Path: System > Details > WAN 4030765 Rev 01 27 3-6-2009 Draft Chapter 3 Configuration and Operation Route Information The Route Info screen shows the routing table for the residential gateway. This screen provides the gateway address for specific destination IP addresses. Path: System > Details > Route 28 4030765 Rev 01 3-6-2009 Draft ARP Information ARP Information The ARP Info screen displays the address resolution protocol (ARP) table. This table shows the IP address to MAC address mapping. Path: System > Details > ARP 4030765 Rev 01 29 3-6-2009 Draft Chapter 3 Configuration and Operation CPU Information CPU Info screen shows detaileinformation about the CPU utilization and the active processes running on the residential gateway. Path: System > Details > CPU Info 30 4030765 Rev 01 3-6-2009 Draft Memory Information Memory Information The Memory Info screen shows the detailed memory availability of the residential gateway. Path: System > Details > Memory Info 4030765 Rev 01 31 3-6-2009 Draft Chapter 3 Configuration and Operation LAN Statistics The Statistics -- LAN screen displays statistics for the local area network (LAN). This screen shows the number of transmitted and received packets on the LAN interface for Ethernet, USB, and wireless devices. Path: System > Statistics > LAN Reset Statistics To reset the statistics, click Reset Statistics on the screen. This action clears the counters and sets them to zero for the packets received and transmitted on the LAN interface. 32 4030765 Rev 01 3-6-2009 Draft WAN Statistics WAN Statistics The Statistics -- WAN screen displays statistics for the devices and interfaces on the wide area network (WAN). This screen shows the number of transmitted and received packets for the DSL WAN interface. Path: System > Statistics > WAN Reset Statistics To reset the statistics, click Reset Statistics on the screen. This action clears the counters and sets them to zero for the packets received and transmitted on the WAN interface. 4030765 Rev 01 33 3-6-2009 Draft Chapter 3 Configuration and Operation ATM Statistics The Statistics -- ATM screen displays statistics on the ATM interface. This screen shows the ATM Layer-2 statistics such as the number of ATM cells transmitted and received over the ATM interface. Path: System>Statistics>ATM Reset Statistics To reset the statistics, click Reset on the screen. This action clears the counters and sets them to zero for the packets received and transmitted on the ATM interface. 34 4030765 Rev 01 3-6-2009 Draft Tools Update Software Tools Update Software The Tools -- Update Software screen allows you to update the software for the residential gateway with a new version. Path: System > Management > Configuration > Update Software 4030765 Rev 01 35 3-6-2009 Draft Chapter 3 Configuration and Operation Updating Software To update the software for the residential gateway, complete the following steps. 1 Click System on the main screen. 2 Click Management. The Configuration screen opens with the Configuration tab in the forefront. 36 4030765 Rev 01 3-6-2009 Draft 3 Click Update Software. The Tools Update Software screen opens. Updating Software In the Software File Name field, click Browse to locate the software image file. 4 5 Click Update Software to update the software of your residential gateway with the new version. The residential gateway loads the new software and reboots when the software update is complete. 4030765 Rev 01 37 3-6-2009 Draft Chapter 3 Configuration and Operation Settings Backup The Settings - Backup screen allows you to back up the residential gateway configuration and save it to disk. Path: System > Management > Configuration > Back Up Config File Backing Up Configuration Settings To back up the configuration settings for the residential gateway, complete the following steps. 1 Click System on the main screen. 2 Click Management. The Configuration screen opens with the Configuration tab in the forefront. 38 4030765 Rev 01 3-6-2009 Draft 3 Click Back Up Config file. The Settings - Backup screen opens. Settings Backup 4 Click Back Up Settings. The following screen is displayed. 5 Click Save. The system prompts you to select a location to store the backup. 6 7 Click Save to save a backup of the configuration. The system displays a message Select a location and type in a file name. when the download of the file is complete. 4030765 Rev 01 39 3-6-2009 Draft Chapter 3 Configuration and Operation Update Settings The Update Settings screen allows you to update the settings for the residential gateway from a source file. We recommend that you use this feature if you want to set up multiple residential gateways with a similar configuration. Path: System > Management > Configuration > Update Config File Updating Configuration Settings To update the configuration settings for the residential gateway, complete the following steps. 1 Click System on the main screen. 2 Click Management. The Configuration screen opens with the Configuration tab in the forefront. 40 4030765 Rev 01 3-6-2009 Draft 3 Click Update Config file. The Update Settings screen opens. Update Settings 4 In the Settings File Name field, enter the name of the configuration file that you want to use to update your settings. You can click Browse to locate the file. 5 Click Update Settings to update the configuration of the residential gateway. 6 Wait a few minutes while the system reboots the residential gateway. The new configuration takes effect after the residential gateway reboots. 4030765 Rev 01 41 3-6-2009 Draft Chapter 3 Configuration and Operation Restore Default Settings The Restore Default Settings screen allows you to restore the residential gateway configuration to the default settings. Note: You can also reset the device by inserting a sharp instrument, such as a paper clip, in the reset area on the back of the residential gateway. Path: System > Management > Configuration > Restore Default Settings Restoring the Configuration to the Default Settings To restore the configuration to the default settings, complete the following steps. 1 Click System on the main screen. 2 Click Management. The Configuration screen opens with the Configuration tab in the forefront. 42 4030765 Rev 01 3-6-2009 Draft 3 Click Restore Default Settings. The Tools Restore Default Settings screen opens. Restore Default Settings 4 Click Restore Default Settings. The system displays the following prompt:
5 Click OK. The system displays the following message:
6 Follow the on-screen instructions to restore the default settings. 4030765 Rev 01 43 3-6-2009 Draft Chapter 3 Configuration and Operation Saving the Configuration for the Residential Gateway The Reboot the Residential Gateway screen allows you to save any configuration changes and to reboot the router to make the changes take effect. Path: System > Management > Configuration > Restore Default Settings >
Save/Reboot Saving the Configuration and Rebooting the Residential Gateway To save any configuration changes and to reboot the router to make the changes take effect, complete the following steps. 1 Click System on the main screen. 2 Click Management. The Configuration screen opens with the Configuration tab in the forefront. 44 4030765 Rev 01 3-6-2009 Draft 3 Click Save/Reboot. The system displays the following message:
Saving the Configuration for the Residential Gateway 4 Follow the instructions on the the screen to save the configuration and to reboot the router. The System Summary screen opens when the residential gateway has finished rebooting. The new settings are displayed. 4030765 Rev 01 45 3-6-2009 Draft Chapter 3 Configuration and Operation Time Settings The Time Settings screen allows you to synchronize the time for the residential gateway with a network-based time server. Path: System > Management > Settings > Internet Time Synchronize with Internet Time To synchronize the time for the residential gateway with the Internet time, complete the following steps. 1 Click System on the main screen. 2 Click Management. The Configuration screen opens with the Configuration tab in the forefront. 46 4030765 Rev 01 3-6-2009 Draft 3 Click the Settings tab. The Settings screen opens. Time Settings 4 Click Internet Time. The Time Settings screen opens. 5 Check the box Automatically synchronize with Internet time servers. The Time Settings screen opens with populated fields. 6 In the First NTP time server field, select a time server from the pull-down list. If you select Other, enter the name of the server in the blank field. 4030765 Rev 01 47 3-6-2009 Draft Chapter 3 Configuration and Operation 7 In the Second NTP time server field, select a time server from the pull-down list. If you select Other, enter the name of the server in the blank field. In the Time zone offset field, select the time zone specific to your area. 8 9 Click Save/Apply. 48 4030765 Rev 01 3-6-2009 Draft Access Control Services Access Control Services The Access Control -- Services screen allows you to enable or disable services such as FTP, HTTP, and ICMP on the residential gateway. Path: System > Management > Settings > Service Control List Enabling or Disabling Services To enable or disable services on the residential gateway, complete the following steps. 1 Click System on the main screen. 2 Click Management. The Configuration screen opens with the Configuration tab in the forefront. 4030765 Rev 01 49 3-6-2009 Draft Chapter 3 Configuration and Operation 3 Click the Settings tab. The Settings screen opens. 4 Click Service Control List. The Access Control -- Services screen opens. 5 To enable or disable a service, do the following:
To enable a service, select the check box next to the service you want to enable. A check box with a check indicates that the service is enabled. To disable a service, de-select the check box next to the service you want to disable. A check box without a check indicates that the service is disabled. 6 Click Save/Apply to enable or disable the selected services. 50 4030765 Rev 01 3-6-2009 Draft IP Access Control IP Access Control The IP Address Access Control mode, if enabled, permits access to local management services from IP addresses contained in the Access Control List. If the Access Control mode is disabled, you cannot configure the residential gateway from non-local IP addresses. For example, you can use this feature to prevent a remote site from configuring the residential gateway. The services are the system applications listed in the Service Control List. Path: System > Management > Settings > IP Access Control Adding IPAddress Access Control To add IP address access control, complete the following steps. 1 Click System on the main screen. The System Summary screen opens by default. 4030765 Rev 01 51 3-6-2009 Draft Chapter 3 Configuration and Operation 2 Click Management. The Configuration screen opens with the Configuration tab in the forefront. 3 Click the Settings tab. The Settings screen opens. 4 Click IP Access Control. The Access Control -- IP Address screen opens. 52 4030765 Rev 01 3-6-2009 Draft 5 Click Add. The Access Control screen opens. IP Access Control 6 In the IP Address field, enter the IP address of the management station that you want to allow access to the local management services. 7 Click Save/Apply to allow access for the IP address you entered. 4030765 Rev 01 53 3-6-2009 Draft Chapter 3 Configuration and Operation Password Access to the Residential Gateway Access to the residential gateway is controlled through three user accounts:
admin. Allows unrestricted access to change and view the configuration of the residential gateway. This login allows access to privileged information. support. Allows an ISP technician to access your residential gateway for maintenance and to run diagnostics user. Allows access to view configuration settings and statistics, as well as, to update the residential gateway's software. The admin login provides access to all screens (including privileged information) for the residential gateway. The support login and user login provide access to only a subset of the screens provided to the admin login. Path: System > Management > Settings > Passwords 54 4030765 Rev 01 3-6-2009 Draft Password Access to the Residential Gateway Creating Passwords To create passwords for the residential gateway, complete the following steps. 1 Click System on the main screen. 2 Click Management. The Configuration screen opens with the Configuration tab in the forefront. 3 Click the Settings tab. The Settings screen opens. 4030765 Rev 01 55 3-6-2009 Draft Chapter 3 Configuration and Operation 4 Click Passwords. The Access Control -- Passwords screen opens. 5 6 7 8 In the Username field from the drop-down list, select the type of password you are creating: admin, support, or user. Admin is the default user name. In the Old Password field, enter the old password. The maximum character length is 16 characters, and passwords cannot contain a space. Admin is the default password. In the New Password field, enter the new password. The maximum character length is 16 characters, and passwords cannot contain a space. In the Confirm Password field, enter the new password again to confirm your entry. 9 Click Save/Apply to save the password. 56 4030765 Rev 01 3-6-2009 Draft
1 | Manual 2 | Users Manual | 3.36 MiB |
Http Server Port The Http Server Port screen allows you to modify the Q. to reviewers Http Server Port Modifying the Http Server Ports Q. to reviewers: need help with procedure To modify the Http Server ports, complete the following steps. 1 Click System on the main screen. 2 Click Management. The Configuration screen opens with the Configuration tab in the forefront. 4030765 Rev 01 57 3-6-2009 Draft Chapter 3 Configuration and Operation 3 Click the Settings tab. The Settings screen opens. 4 Click HttpServer. The Http Server Port opens. 5 6 In the LAN Http Server Port field, enter the In WAN Http Server Port field, enter the 58 4030765 Rev 01 3-6-2009 Draft System Log Configuration System Log Configuration The System Log -- Configuration screen allows you to log all the selected events on the residential gateway. For example, a failed login is an event that you can select. Path: System > Management > Local Management > System Log Configuration Logging Events To log selected events, complete the following steps. 1 Click System on the main screen. 2 Click Management. The Configuration screen opens with the Configuration tab in the forefront. 4030765 Rev 01 59 3-6-2009 Draft Chapter 3 Configuration and Operation 3 Click the Local Management tab. The Local Management screen opens. 4 Click System Log Configuration. The System Log Configuration screen opens. 5 Do you want to enable the logging of events?
6 If yes, in the Log field select Enable and go to step 6. If no, in the Log field, select Disable and click Save/Apply to turn off logging. You have completed this procedure. In the Log Level field, select the level of events that you want to log from the following options. All events above or equal to the selected level will be logged. Emergency Alert Critical Error Warning Notice Informational 60 4030765 Rev 01 3-6-2009 Draft System Log Configuration 7 8 Debugging In the Display Level field, select the level of the logged events that you want to display from the following options. All logged events above or equal to the selected level will be displayed. Emergency Alert Critical Error Warning Notice Informational Debugging Select the mode for the logging from the following options. If the selected mode is "remote" or "both," events are sent to the specified IP address and UDP port of the remote syslog server. If the selected mode is "local" or "both," events are recorded in the local memory. Local. Events are logged in memory. You must log in to the device to display the events. Remote. Events log is sent to a remote server (syslog server). Both. Events are logged in memory and are sent to the remote server. 9 Click Save/Apply to start logging events. Disabling Logging To disable the logging function, complete the following steps. Q. to reviewer test this procedure against application 1 Click System on the main screen. 2 Click Management. The Configuration screen opens with the Configuration tab in the forefront. 4030765 Rev 01 61 3-6-2009 Draft Chapter 3 Configuration and Operation 3 Click the Local Management tab. The Local Management screen opens. 4 Click System Log Configuration. The System Log Configuration screen opens. 5 6 7 In the Log field, click Disable. In the Log Level field, select from the following options to indicate the level of alarms to be logged:
Emergency Alert Optical Error Warning Notice Informational Debugging In the Display Level field, select from the following options to indicate the level of alarms that you want displayed:
62 4030765 Rev 01 3-6-2009 Draft System Log Configuration Emergency Alert Optical Error Warning Notice Informational Debugging In the Mode field, select from the following options to indicate the location to store the logs. Local. Store on the residential gateway. Remote. Store on a remote log server. Both. Store on the residential gateway and on the remote log server. 8 9 Click Save/Apply. The following prompt appears alerting you that you will lose any information captured by the residential gateway:
10 Are you sure you want to disable logging and lose the captured data?
If yes, click OK to turn off logging. If no, click Cancel. 4030765 Rev 01 63 3-6-2009 Draft Chapter 3 Configuration and Operation System Logs The System Log screen allows you to view the logs of activity for the residential gateway. Q. to reviewers. How many or how big are events stored? How long are they stored? Will reset or power failure clear t hem? If this is a circular file, if so max size before roll over. Path: System > Management > Local Management > View System Log Viewing System Logs To view the system log for the residential gateway, complete the following steps. 1 Click System on the main screen. 2 Click Management. The Configuration screen opens with the Configuration tab in the forefront. 64 4030765 Rev 01 3-6-2009 Draft 3 Click the Local Management tab. The Local Management screen opens. System Logs 4 Click View System Log. The System Log screen opens. 5 Review the log entries on the screen. 6 Click Refresh to refresh the system log. 4030765 Rev 01 65 3-6-2009 Draft Chapter 3 Configuration and Operation Print Server Settings The Print Server Setting screen allows you to enable or disable printer support from the USB connection. Path: System > Advanced > Print Server Enabling the Print Server To enable the print server, complete the following steps. 1 Click System on the main screen. 2 Click the Advanced tab. The Print Server settings screen opens with the Print Server tab in the forefront. 66 4030765 Rev 01 3-6-2009 Draft 3 Select the Enable on-board print server check box. The screen populates with more fields. Print Server Settings 4 In the Print server name field, enter the name of the print server you want to enable. In the Make and model field, enter the make and model of the printer. 5 6 Click Save/Apply to enable the print server. Disabling the Print Server To disable the print server, complete the following steps. 1 Click System on the main screen. 2 Click the Advanced tab. The Print Server settings screen opens with the Print Server tab in the forefront. 4030765 Rev 01 67 3-6-2009 Draft Chapter 3 Configuration and Operation 3 Clear the Enable on-board print server check box. The screen refreshes and the fields for entering print server name, make, and mode are removed from the screen. 4 Click Save/Apply to disable the print server. 68 4030765 Rev 01 3-6-2009 Draft Clone MAC Addresses Clone MAC Addresses The Clone MAC screen allows you to enable or disable the clone MAC function. The Clone MAC function allows you to clone MAC addresses so that the residential gateway assumes the MAC address of an attached device or a user-specified MAC address. Path: System > Advanced > Clone MAC Enabling the Clone MAC Function To enable the Clone MAC function, complete the following steps. 1 Click System on the main screen. 2 Click the Advanced tab. The Print Server settings screen opens with the Print Server tab in the forefront. 4030765 Rev 01 69 3-6-2009 Draft Chapter 3 Configuration and Operation 3 Click the Clone MAC tab. 4 Select the Enable clone MAC address check box. The screen populates with more fields. 5 In the MAC Address field, enter the MAC address that you want to clone. You can also click Load/client PC MAC to locate an address you want to clone. 6 Click Apply/Reboot to clone the MAC address. The residential gateway reboots and assumes the MAC address you have specified. Disabling the Clone MAC Function To disable the Clone MAC function, complete the following steps. 1 Click System on the main screen. 70 4030765 Rev 01 3-6-2009 Draft 2 Click the Advanced tab. The Print Server settings screen opens with the Print Server tab in the forefront. Clone MAC Addresses 3 Click the Clone MAC tab. 4 Uncheck the Enable clone MAC address check box. The screen refreshes and the field for entering the MAC address is removed from the screen. 5 Click Apply/Reboot to disable the Clone MAC function. 4030765 Rev 01 71 3-6-2009 Draft Chapter 3 Configuration and Operation Voice SIP Basic Configuration The Voice ---- SIP screen allows you to enter and save the session initiation protocol
(SIP) parameters and to start and stop the voice application. Path: System > Advanced > VoIP Basic Setting Up VoIP To enter the VoIP parameters, complete the following steps. 1 Click System on the main screen. 72 4030765 Rev 01 3-6-2009 Draft 2 Click Advanced. The Print Server Settings screen opens with the Print Server tab in the forefront. Voice SIP Basic Configuration 3 Click the VoIP Basic tab. The Voice ---- SIP screen opens. 4 5 6 In the Interface name field, select the interface you want to use for VoIP. In the Locale selection field, select the country where you are located. In the Preferred codec field, select one of the following codec values:
Note: If you want to indicate an order of preference, enter a codec value for each column. G711U 4030765 Rev 01 73 3-6-2009 Draft Chapter 3 Configuration and Operation G711A G723 G726 G729 BV16 iLBC In the Preferred ptime field, enter the time in seconds. In the SIP domain name field, enter the domain name for the session initiation protocol (SIP) server. 7 8 9 Do you wish to use SIP Proxy?
If yes, click in the Use SIP Proxy field to enter a check mark. If no, make sure the Use SIP Proxy field is deselected. 74 4030765 Rev 01 3-6-2009 Draft Voice SIP Basic Configuration 10 Do you wish to use an SIP Outbound proxy?
If yes, select the Use SIP Outbound Proxy field. If no, make sure the Use SIP Outbound Proxy field is deselected. 11 Do you wish to use SIP Registrar?
If yes, select the Use SIP Registrar field. If no, make sure the Use SIP Registrar field is deselected. 12 Do you wish to enable SIP tag matching?
If yes, select the Enable SIP tag matching (clear for Vonage Interop) field. If no, make sure the Enable SIP tag matching (clear for Vonage Interop) field is deselected. 13 Do you wish to use a remote server for SIP log messages?
If yes, select the Remote server for SIP log messages field. If no, make sure the Remote server for SIP log messages field is deselected. 14 In the Log IP Address field, enter the IP address for the log server. 15 In the Log port field, enter the port number for the log server. 16 In the Extension field, enter the phone number (extension) for the VoIP line. 17 In the Password field, enter the password for the extension. This allows you to authenticate the phone number. 18 Do you want to activate the line?
If yes, click Start SIP client to save your settings and to activate the line. If no, click Stop SIP client to deactivate the line. 4030765 Rev 01 75 3-6-2009 Draft Chapter 3 Configuration and Operation Voice SIP Advanced Configuration The Voice----SIP screen allows you to configure the more advanced VOIP features, such as call forwarding and .... Path: System > Advanced > VoIP Advanced Setting Up Advanced VOIP Features To set up the advanced VOIP features, complete the following steps. 1 Click System on the main screen. 2 Click Advanced. The Print Server Settings screen opens with the Print Server tab in the forefront. 76 4030765 Rev 01 3-6-2009 Draft 3 Click the VoIP Advanced tab. The Voice ---- SIP screen opens. Voice SIP Advanced Configuration 4 In the Forwarding Line number field, enter the number to which you want to forward calls. Configure how calls are forwarded to this line using the following options:
a Check the Call forwarding when busy check box if you want to forward this line to another number when this line is busy. b Check the Forwarding all calls check box if you want to forward all calls to this line. c Check the Call forwarding if no answer check box if you want to forward this line if the caller receives no answer. d Check the Call waiting check box if you want to enable call waiting for this line. 5 Repeat step 4 for a second phone line for which you wish to forward incoming calls. 6 Check the Enable MWI subscription check box if you want to enable message waiting indicator. 7 Check the Enable T38 support check box if you want to enable T38 fax support. 8 In the Registration Expire Timeout field, enter the registration expiration time of the SIP client. In the Dial-Plan Setting field, enter the dial plan for the line. For example, enter how many digits the user must enter before the call attempt is made. 9 10 In the Dtmf Relay setting field, select one of the following settings:
Sip Info RFC2833 Voice Band 4030765 Rev 01 77 3-6-2009 Draft Chapter 3 Configuration and Operation 11 In the SIP Transport protocol field, select the protocol you will support from the following options:
All TCP UDP TLS 12 Check the Enable SIP tag matching (Uncheck for Vonage Interop) check box if you want to enable session initiation protocol. 13 Check the Enable Music Server check box if you want to have music playing while callers wait. 14 Click Start SIP client or click Stop SIP client if you want to start or stop the SIP client. 78 4030765 Rev 01 3-6-2009 Draft USB File List USB File List The USB File List screen allows you to view and download the content of a USB flash drive from any computer connected to the gateway. This feature allows your residential gateway to act like a shared network drive. Path: System > Advanced > USB 4030765 Rev 01 79 3-6-2009 Draft 3-6-2009 Draft 4 Chapter 4 DSL Configuration The DSL tab allows you to check the status of the DSL connection and to modify the configuration. Use this chapter to help you check the status of the DSL connection, such as performance, and to modify the DSL configuration. In This Chapter DSL Summary ....................................................................................... 82 DSL Statistics ......................................................................................... 83 DSL Diagnostics.................................................................................... 85 DSL Settings........................................................................................... 87 ADSL Tone Settings.............................................................................. 89 DSL Advanced Settings ....................................................................... 91 4030765 Rev 01 81 3-6-2009 Draft Chapter 4 DSL Configuration DSL Summary The DSL Summary screen shows the DSL performance and operational configuration of the DSL interface, such as signal to noise ratio and output power and line coding. The DSL chip on the residential gateway automatically detects the best method to use to communicate with the DSL access mutliplexer (DSLAM). This screen reports the results of that process. Path: DSL > Summary 82 4030765 Rev 01 3-6-2009 Draft DSL Statistics DSL Statistics The DSL Statistics screen displays statistics for devices and interfaces on the ADSL network. This screen shows the details of the physical layer of the DSL line such as the connection rate and signal to noise ratio. Path: DSL > Statistics Testing the Quality of the DSL Connection The ADSL Bit Error Rate (BER) test determines the quality of the ADSL connection. The test is done by transferring idle cells containing a known pattern and comparing the received data with this known pattern to check for any errors. To test for quality of the DSL connection, complete the following steps. 1 Click DSL on the main screen. 2 Click the Statistics tab. The Statistics screen opens. 3 Click ADSL BER Test. The ADSL BER Test - Start screen opens. 4 In the Tested Time (sec) field, enter the duration of the test in seconds. Values are: 1, 5, 10, 20, 60, 120, 180, or 240 seconds. 5 Click Start on the ADSL BER Test - Start screen to start the test. 4030765 Rev 01 83 3-6-2009 Draft Chapter 4 DSL Configuration Reset Statistics To reset the statistics, complete the following steps. 1 Click DSL on the main screen. 2 Click the Statistics tab. The Statistics screen opens. 3 Click Reset Statistics on the Statistics screen. This action clears the ADSL cell counters and sets them to zero. 84 4030765 Rev 01 3-6-2009 Draft DSL Diagnostics DSL Diagnostics The Diagnostics screen shows the results of diagnostics tests that the residential gateway performs while testing your DSL connection. The individual tests are listed on the Diagnostics screen. Path: DSL > Diagnostics Running Diagnostic Tests To run diagnostic tests for the residential gateway, complete the following steps. 1 Click DSL on the main screen. 4030765 Rev 01 85 3-6-2009 Draft Chapter 4 DSL Configuration 2 Click the Diagnostics tab. The Diagnostics screen opens. 3 Click Run Diagnostics Tests to start the diagnostics test. Q. to reviewers: How do they view the tests?
86 4030765 Rev 01 3-6-2009 Draft DSL Settings DSL Settings The DSL Settings screen allows you to set the modulation for the residential gateway, select a phone line pair, and to select advanced capability of the chip set:
seamless rate adaptation (SRA) and bitswap enable. Path: DSL > Setting Configuring DSL Settings To configure the DSL settings for the residential gateway, complete the following steps. 1 Click DSL on the main screen. The Summary screen opens by default. 2 Click the Setting tab. The DSL Settings screen opens. 4030765 Rev 01 87 3-6-2009 Draft Chapter 4 DSL Configuration 3 Do you want to automatically select the modulation?
If yes, make sure the Automatic select check box is checked under Select the modulation below field. Go to step 5. If no, uncheck the Automatic Select check box. A list of modulation types appears. 4 Under the Select the modulation below area on the screen, select the modulation that you want to use. You can select one or all of the following modulations:
G.Dmt Enabled G.lite Enabled T1.413 Enabled ADSL2 Enabled AnnexL Enabled ADSL2+ Enabled AnnexM Enabled 5 Under the Capability field, select the capability that you want to use from the following options:
Bitswap Enable SRA Enable 6 Click Save/Apply to save the configuration. 88 4030765 Rev 01 3-6-2009 Draft ADSL Tone Settings ADSL Tone Settings The ADSL Tone Settings screen allows you to select active DSL tones or frequencies used by the DSL transceiver. Path: DSL > Setting > Advanced Settings > Tone Selection Setting DSL Tones or Frequencies To set DSL tones or frequencies, complete the following steps. 1 Click DSL on the main screen. The Summary screen opens by default. 2 Click the Setting tab. The DSL Settings screen opens. 4030765 Rev 01 89 3-6-2009 Draft Chapter 4 DSL Configuration 3 Click Advanced Settings. The DSL Advanced Settings screen opens. 4 Click Tone Selection. The ADSL Tone Settings screen opens. 5 Select the ADSL tone settings as follows. To select all the tones, click Check All. To select individual tones, click Clear All and then select the tones you want. 6 Click Apply to configure the tone settings. 7 Click Close to return to the DSL Advanced Settings screen. 90 4030765 Rev 01 3-6-2009 Draft DSL Advanced Settings DSL Advanced Settings The DSL Advanced Settings screen allows you to select a test mode. Path: DSL > Setting > Advanced Settings Configuring DSL Advanced Settings To configure the DSL advanced settings, complete the following steps. 1 Click DSL on the main screen. The Summary screen opens by default. 2 Click the Setting tab. The DSL Settings screen opens. 4030765 Rev 01 91 3-6-2009 Draft Chapter 4 DSL Configuration 3 Click Advanced Settings. The DSL Advanced Settings screen opens. 4 Select the test mode from the following options:
Normal Reverb Medley No refrain L3 5 Click Apply to configure and save the advanced settings. 92 4030765 Rev 01 3-6-2009 Draft 5 Chapter 5 Home Network Configuration The Home Network tab allows you to check the home network configuration. You use this tab to configure and check the status of the devices connected to your home network. In This Chapter Client Summary .................................................................................... 94 WAN Quick Setup................................................................................ 97 Set Top Box Quick Setup ................................................................... 101 LAN Setup ........................................................................................... 103 Wireless Summary.............................................................................. 106 Wireless Basic ...................................................................................... 107 Wireless Security................................................................................. 111 Wireless MAC Filtering ..................................................................... 116 Wireless Bridge ................................................................................... 120 Wireless Station List ........................................................................... 121 HPNA Information............................................................................. 123 HPNA Statistics Information ............................................................ 125 Home Monitoring ............................................................................... 126 4030765 Rev 01 93 3-6-2009 Draft Chapter 5 Home Network Configuration Client Summary The Client Summary screen shows all the client devices attached to the residential gateway. You can click Show HPNA Client to display the HPNA devices attached to the HPNA RF interface of the residential gateway. Path: Home Network > Summary Updating HPNA Clients To update the HPNA clients, complete the following steps. 1 Click Home Network on the main screen. 2 Click Summary. The Client Summary screen opens. 94 4030765 Rev 01 3-6-2009 Draft 3 Click Show HPNA Client. After processing, the HPNA Info screen opens. Client Summary 4 Click HPNA Update to update the HPNA software of HPNA devices attached to the residential gateway The Update HPNA Image window opens. anji for rev B 5 In the Software File Name field, enter the name of the file that you want to use to update your system. You can click Browse to locate the file. 6 Click Next. The software for the attached HPNA devices is updated. Da Wireless Station List This page shows the attached clients (also known as associated stations) to the wireless access point (AP) of the residential gateway. At this time, there is no limit to the number of simultaneously attached devices. Path: Home Network > Summary > Show Wireless Client 4030765 Rev 01 95 3-6-2009 Draft Chapter 5 Home Network Configuration Showing Attached Clients To show the attached clients to the wireless access point of the residential gateway, complete the following steps. 1 Click Home Network on the main screen. 2 Click Summary. The Client Summary screen opens. 3 Click Show Wireless Client. The Wireless Station List screen opens. 4 Click Refresh to update the list of attached clients. 96 4030765 Rev 01 3-6-2009 Draft WAN Quick Setup WAN Quick Setup The WAN Quick Setup screen allows you to set up wide area network (WAN) connections and settings, such as virtual channel identifiers (VCi), virtual path identifiers (VPI), and quality of service (QoS). Path: Home Network > WAN Setup > WAN Quick Setup Configuring the WAN Interface (PPPoE Broadband Type) To configure a WAN interface with the PPP over Ethernet (PPPoE) broadband type, complete the following steps. 1 Click Home Network on the main screen. The Client Summary screen opens. 4030765 Rev 01 97 3-6-2009 Draft Chapter 5 Home Network Configuration 2 Click WAN Setup. The WAN Quick Setup screen opens. Q. to reviewers click edit or add to see the next fields. In the Broadband Type field, select DSL. In the DSL Mode field, select ATM. More fields populate on the screen. 3 4 5 Complete the following fields on the screen as follows:
Note: This configuration is an example of a specific setting for the residential gateway. Your values may differ depending upon your service provider. a b In the Encapsulation Mode field, select LLC/SNAP - Bridging. c Check the VLAN Mux - Enable Multiple Protocols Over a Single PVC In the Broadband Connect Type field, select PPP over Ethernet (PPPoE). check box. d In the PPP Username: field, enter the user name for the point-to-point e f protocol. In the PPP Password: field, enter the pasword for the point-to-point protocol. In the PPPoE Service Name: field, enter the name for the point-to-point over Ethernet service. g In the Authentication Method field, select auto from the drop-down list. Auto turns on authentication automatically. h In the VPI field, enter the virtual path identifier (VPI). Values are: 0 to 65535 i In the VCI field, enter the virtual channel identifier (VCI). Values are:
0 to 65535 In the Service Category field, select UBR Without PCR. j k In the Authentication Method field, select AUTO. l m Select the Enable WAN Service check box. Select the Enable IGMP Multicast check box. 6 Click Add. 7 Click Reboot. This action reboots the residential gateway so that the WAN setup configuration takes effect. 98 4030765 Rev 01 3-6-2009 Draft Configuring the WAN Interface (MER Broadband Type) To configure a WAN interface for MAC Encapsulation Routing (MER) broadband type, complete the following steps. 1 Click Home Network on the main screen. The Client Summary screen opens. WAN Quick Setup 2 Click WAN Setup. The WAN Quick Setup screen opens. Q. to reviewers: Need to click Add or Edit to see this screen. 3 Click Add or Edit.
<Need populated screen screen>
In the Broadband Type field, enter DSL. In the DSL Mode field, select ATM. More fields populate on the screen. 4 5 6 Complete the following fields on the screen as follows:
Note: This configuration is an example of a specific setting for the residential gateway. Your values may differ depending upon your service provider. a In the Broadband Connect Type field, select MAC Encapsulation Routing
(MER). b In the Encapsulation Mode field, select LLC/SNAP - Bridging. c Select the VLAN Mux - Enable Multiple Protocols Over a Single PVC check box. d In the VLAN ID[0-4095]: field, enter an ID for the VLAN. Values are 0-4095. e In the VPI field, enter the virtual path identifier (VPI). Values are: 0 to 65535 f In the VCI field, enter the virtual channel identifier (VCI). Values are: 0 to 65535 g In the the Service Category field, select UBR Without PCR. h Select the Enable Quality of Service check box. i j k Select the Obtain DNS server addresses automatically option. Select the Obtain an IP address automatically option. Select the Obtain default gateway automatically option. 4030765 Rev 01 99 3-6-2009 Draft Chapter 5 Home Network Configuration Select the Enable IGMP Multicast check box. l m Select the Enable WAN Service check box. 7 Click Add. 8 Click Reboot. This action reboots the residential gateway so that the WAN setup configuration takes effect. 100 4030765 Rev 01 3-6-2009 Draft Set Top Box Quick Setup Set Top Box Quick Setup The Set Top Box Quick Setup screen allows you to quickly configure set-top box permanent virtual circuits (PVCs) and DHCP option 60 parameters. Path: Home Network > WAN Setup > Set Top Box Quick Setup Q. to reviewers Need populated screen Configuring a Quick Set Up for a Set-Top To quickly configure set-top box permanent virtual circuits (PVCs) and DHCP option 60 parameters, complete the following steps. 1 Click Home Network on the main screen. The Client Summary screen opens. 2 Click WAN Setup. The WAN Quick Setup screen opens with the WAN Quick Setup tab in the forefront. 3 Click the Set Top Box Quick Setup tab. Q. to reviewers: Need populated screen 4 Complete the fields on the screen as follows. 4030765 Rev 01 101 3-6-2009 Draft Chapter 5 Home Network Configuration In the Broadband Type field, select DSL. Note: This configuration is an example of a specific setting for the residential gateway. Your values may differ depending upon your service provider. a b In the DSL mode field, select ATM. c In the Broadband Connect Type filed, select MAC Encapsulation Routing
(MER). d In the Encapsulation Mode field, select LLC/SNAP - BRIDGING. e f In the VPI field, enter the virtual path identifier (VPI). Values are: 0 to 65535 In the VCI field, enter the virtual channel identifier (VCI). Values are:
0 to 65535 g In the Service Category field, select UBR Without PCR. h In the Enable Virtual Port Function (Configure following parameter if the Set Top Box has been installed) field, enable the check box. In the Group Name field, enter a descriptive name for the virtual port group. In the Automatically Add Clients With the following DHCP Vendor IDs field, enter the DHCP option 60 string of the attached set-top boxes. i j 5 Click Save/Reboot to save your changes. 102 4030765 Rev 01 3-6-2009 Draft LAN Setup LAN Setup The Local Area Network (LAN) Setup screen allows users to set up LAN settings such as dynamic host configuration protocol (DHCP), Internet gateway multi-cast protocol (IGMP), and universal plug and play (UPnP). Path: Home Network > LAN Setup Configuring the LAN Interface To configure the LAN interface, complete the following steps. 1 Click Home Network on the main screen. The Client Summary screen opens. 4030765 Rev 01 103 3-6-2009 Draft Chapter 5 Home Network Configuration 2 Click LAN Setup. The Local Area Network (LAN) setup screen opens. In the IP Address field, enter the IP address for the residential gateway. In the Subnet Mask field, enter the subnet mask for the residential gateway. 3 4 5 Do you want to enable UPnP?
If yes, check the Enable UPnP check box. If no, uncheck the Enable UPnP check box. 6 Do you want to Enable the DHCP server?
If yes, select Enable DHCP Server, and go to step 7. If no, select Disable DHCP Server, and go to step 8. 7 Under Enable DHCP server, enter the following information:
a In the Start IP Address field, enter the first IP address in the range for the DHCP IP address lease pool. b In the End IP Address field, enter the last IP address in the range for the DHCP IP address lease pool. c In the Subnet Mask field, enter the subnet mask for the DCHP server. d In the Leased Time (hour) field, enter the duration of the DHCP lease address. 8 Do you want to configure a second IP address and subnet mask for the LAN interface?
If yes, check the Configure the second IP Address and Subnet Mask for LAN interface check box. The screen populates with another IP address and subnet mask field. Go to step 9. If no, uncheck the Configure the second IP Address and Subnet Mask for LAN interface check box. Go to step 10. 104 4030765 Rev 01 3-6-2009 Draft LAN Setup 9 Under Configure the second IP Address and Subnet Mask for LAN interface, enter the following information. a b In the Subnet Mask field, enter the subnet mask for the residential gateway. In the IP Address field, enter the IP address for the residential gateway. 10 Click Save to save the changes or click Save/Reboot to save the changes and reboot the residential gateway. Address Reservation The Address Reservation screen.. Q. to reviewers: Need info Path: Home Network > LAN Setup > Address Reservation 4030765 Rev 01 105 3-6-2009 Draft Chapter 5 Home Network Configuration Wireless Summary The Wireless Summary screen shows the MAC address and security information for the wireless connection. Path: Home Network > Wireless>Summary 106 4030765 Rev 01 3-6-2009 Draft Wireless Basic Wireless Basic The Wireless -- Basic screen allows you to configure the basic features of the wireless LAN interface. You can enable or disable the LAN interface, hide the network from active scans, enter a name for the wireless network, and restrict the channel set based on coutry requirements. Path: Home Network > Wireless > Basic Enabling the Wireless Network To enable the wireless network, complete the following steps. 1 Click lick Home Network on the main screen. The Client Summary screen opens. 4030765 Rev 01 107 3-6-2009 Draft Chapter 5 Home Network Configuration 2 Click Wireless. The Wireless Summary screen opens. 3 Click Basic. The Wireless Basic screen opens. 4 Check the Enable Wireless check box to enable the wireless network. The screen populates with additional fields. 5 Do you want to prevent other wireless clients from communicating with the wireless access point (AP) of the residential gateway?
If yes, check the Hide Access Point check box. This feature prevents any other wireless client from communicating with the access point of the residential gateway (or disables the wireless connection). 6 7 8 If no, uncheck the Hide Access Point check box. In the SSID field, enter the service set identifier (SSID). From the Channel drop-down list, select Auto or a channel from 1 to 11. In the Wireless Mode field, select the wireless mode from the drop-down list:
802.11g & 802.11b - Allows you to mix Wireless-B with Wireless-G equipment, but you will lose the higher performance speeds of Wireless-G. 108 4030765 Rev 01 3-6-2009 Draft Wireless Basic 802.11g only - Features the same benefits as Wireless-B, but offers 5 times the speed at up to 54 Mbps. Wireless-G currently offers the best combination of performance and value. You can mix Wireless-B with Wireless-G equipment, but you will lose the higher performance speeds of Wireless-G. 802.11b only - Operates on the 2.4GHz frequency band and can transmit data at speeds of up to 11 Mbps within a range of up to 100-150 feet. Wireless range can be affected by reflective or signal-blocking obstacles, such as mirrors, walls, devices and location, whether indoors or outdoors. In the 54g Protection field, select Auto or Off. Do not disable 54g Protection if there is a possibility that a 802.11b device may need to use your wireless network. Note: 54g Protection allows 802.11g and 802.11b devices to co-exist in the same network without speaking at the same time. In Auto Mode, the wireless device will use RTS/CTS to improve 802.11g performance in mixed 802.11g/802.11b networks. Turn protection off to maximize 802.11g throughput under most conditions. 9 10 Click Save/Apply to enable the wireless network. Disabling the Wireless Network To disable the wireless network, complete the following steps. 1 Click lick Home Network on the main screen. The Client Summary screen opens. 2 Click Wireless. The Wireless Summary screen opens. 4030765 Rev 01 109 3-6-2009 Draft Chapter 5 Home Network Configuration 3 Click Basic. The Wireless Basic screen opens. 4 Uncheck the Enable Wireless check box. The wireless network fields are removed from the screen. 5 Click Save/Apply to disable the wireless network. 110 4030765 Rev 01 3-6-2009 Draft Wireless Security Wireless Security The Wireless Security screen allows you to configure security features of the wireless LAN interface. You can set the network authentication method, select data encryption, specify whether a network key is required to authenticate to this wireless network, and specify the encryption strength. Path: Home Network > Wireless > Security WEP Encryption Disabled Securing Your Wireless Network with WEP WEP is a security protocol for wireless networks. WEP provides security by encrypting data over radio waves so that it is protected as it is transmitted from one end point to another. A shared key (similar to a password) is used to allow communication between the computers and the residential gateway. WEP offers a basic, but satisfactory level of security for wireless data transmission. To secure your wireless network with Wireless Equivalent Privacy (WEP), complete the following steps. 4030765 Rev 01 111 3-6-2009 Draft Chapter 5 Home Network Configuration 1 Click Home Network on the main screen. The Client Summary screen opens. 2 Click Wireless. The Wireless Summary screen opens. 3 Click Security. The Wireless -- Security screen opens. 4 5 In the Select SSID field, use the drop-down list to choose an option for the service set identifier (SSID). Note: You can add options to this drop-down list on the Wireless -- Basic screen. In the Network Authentication field, choose one of these two options for the authentication method. Open. All devices may access the wireless network. (Preferred Option). 112 4030765 Rev 01 3-6-2009 Draft Shared. Only devices configured with the 64 bit or 128 Bit Key may access the wireless network. 6 In the WEP Encryption field, select Enabled. The Wireless -- Security screen populates with more fields. Wireless Security 7 In the Encryption strength field, choose one of the following options:
64-bit. Secures your network by 64-bit (10 hex digit) encryption of all traffic using a static key. 128-bit. Secures your network by 128-bit (26 hex digit) encryption of all traffic using a static key. Attention: These settings must be identical to your wireless client devices. 8 Do you want the system to generate the network key for you?
If yes, go to step 11. If no, you must enter your own network key(s) in the field provided. Go to step 9. 9 In the Current Network Key field, select a network key from the drop-down list. Values are: 1, 2, 3, or 4. 10 In the Network Key 1 field, enter the network key you wish to you use. 11 Based on the encryption strength you chose in step 7, do one of the following. 4030765 Rev 01 113 3-6-2009 Draft Chapter 5 Home Network Configuration For 64-bit encryption, repeat steps 9 and 10 for keys 2 through 4 if you use 64-
bit encryption. If you use 128-bit encryption, only one network key is required. Go to step 14. For 128-bit encryption, only one network key is used. Go to step 13. 12 In the WEP Key Paraphrase field, enter your information as follows based on 64-
bit or 128-bit encryption strength:
For 64-bit encryption strength, enter a passphrase (1 to 31 characters) and click Generate. Four keys are generated based on the passprhase. For 1280bit encryption, enter a passphrase (1 to 31 characters) and click Generate. A single key is generated based on the passprhase. 13 Click Save/Apply. Securing Your Wireless Network with Encryption Keys If you choose WPA-PSK (Wi-Fi Protected Access-PreShared Key) as the network authentication method, you can secure your network by encrypting all traffic using a pre-shared dynamic key. To secure your wireless network with a preshared dynamic key, complete the following steps. 1 Click Home Network on the main screen. The Client Summary screen opens. 2 Click Wireless. The Wireless Summary screen opens. 114 4030765 Rev 01 3-6-2009 Draft 3 Click Security. The Wireless -- Security screen opens. Wireless Security Cli 4 5 6 In the Network Authentication field, select WPA-PSK from the drop-down list. In the WPA Pre-Shared Key field, enter a shared Key (8-63 characters). The system will periodically generate a dynamic key based on the shared key. In the WPA Group Rekey Interval field, enter the group key renewal time period. This time defines how often the dynamic key is regenerated In the WPA Encryption field, select the encryption from the drop-down list. 7 8 Click Save/Apply to save your settings. 4030765 Rev 01 115 3-6-2009 Draft Chapter 5 Home Network Configuration Wireless MAC Filtering The Wireless -- MAC Filtering screen allows you to allow or block certain wireless clients from accessing the residential gateway. If you know the MAC address of the client you want to block, you can use this screen to provide access to the residential gateway or block that client from accessing it. Path: Home Network > Wireless > Advanced > MAC Filter Allowing Wireless Clients to Access the Residential Gateway You can allow wireless clients to access the residential gateway if you know the client's MAC address. MAC restrict mode must be enabled. To allow wireless clients to access the residential gateway, complete the following steps. 1 Click Home Network on the main screen. The Client Summary screen opens. 116 4030765 Rev 01 3-6-2009 Draft 2 Click Wireless. The Wireless Summary screen opens. Wireless MAC Filtering 3 Click Advanced. The Wireless Advanced Settings screen opens. 4 Click MAC Filter. The Wireless MAC Filtering screen opens. In the MAC Restrict Mode field, click Allow to enable the MAC restrict mode. 5 6 Click Add. The Wireless -- MAC Filter screen opens. 7 In the MAC Address field, enter the MAC address of the client that you want to allow access to the residential gateway. 8 Click Save/Apply to allow this wireless client to access the residential gateway. 4030765 Rev 01 117 3-6-2009 Draft Chapter 5 Home Network Configuration Blocking Wireless Clients You can block wireless clients from accessing the residential gateway if you know the client's MAC address. MAC restrict mode must be enabled. To prevent wireless clients from accessing the residential gateway, complete the following steps. 1 Click Home Network on the main screen. The Client Summary screen opens. 2 Click Wireless. The Wireless Summary screen opens. 3 Click Advanced. The Wireless Advanced Settings screen opens. 118 4030765 Rev 01 3-6-2009 Draft 4 Click MAC Filter. The Wireless MAC Filtering screen opens. Wireless MAC Filtering In the MAC Restrict Mode field, click Deny to enable the MAC restrict mode. 5 6 Click Add. The Wireless -- MAC Filter screen opens. 7 In the MAC Address field, enter the MAC address of the client that you want to prevent from accessing the residential gateway. 8 Click Save/Apply to prevent this wireless client from accessing the residential gateway. 4030765 Rev 01 119 3-6-2009 Draft Chapter 5 Home Network Configuration Wireless Bridge Wireless LAN Bridging (also referred to as a Wireless Distribution System, WDS) refers to two or more 802.11 access points that send traffic between them (from access point to access point) as opposed to between access point and a client computer. The Wireless Bridge screen allows you to configure the wireless bridge features of the wireless LAN interface as follows:
Select Wireless Bridge for the AP mode to disable access point functionality. Select Access Point for the AP mode to enables access point functionality. Wireless bridge functionality will still be available and wireless stations will be able to associate to the AP. Select Disabled for the Bridge Restrict field to disable wireless bridge restriction and any device can communicate with the residential gateway over the wireless bridge. Select Enabled for the Bridge Restrict field to enable wireless bridge restriction to restrict the bridges that can communicate with the residential gateway over the wireless interface. Path: Home Network > Wireless > Advanced > Wireless Bridge 120 4030765 Rev 01 3-6-2009 Draft Wireless Station List Wireless Station List This page shows the attached clients (also known as associated stations) to the wireless access point (AP) of the residential gateway. At this time, there is no limit to the number of simultaneously attached devices. Path: Home Network > Summary > Show Wireless Client Showing Attached Clients To show the attached clients to the wireless access point of the residential gateway, complete the following steps. 1 Click Home Network on the main screen. 2 Click Summary. The Client Summary screen opens. 4030765 Rev 01 121 3-6-2009 Draft Chapter 5 Home Network Configuration 3 Click Show Wireless Client. The Wireless Station List screen opens. 4 Click Refresh to update the list of attached clients. 122 4030765 Rev 01 3-6-2009 Draft HPNA Information HPNA Information The HPNA Info screen allows you to view the HPNA devices connected to the residential gateway. Path: Home Network > HPNA > HPNA Info Updating HPNA Information To update the HPNA information, complete the following steps. 1 Click Home Network on the main screen. The Client Summary screen opens. 4030765 Rev 01 123 3-6-2009 Draft Chapter 5 Home Network Configuration 2 Click Show HPNA Client. After a moment of processing, the HPNA Info screen opens. 3 Click HPNA Update to to update the HPNA software of HPNA devices attached to the residential gateway The Update HPNA Image window opens. 4 In the Software File Name field, enter the name of the file that you want to use to update your system. You can click Browse to locate the file. 5 Click Next. The software for the attached HPNA devices is updated. 124 4030765 Rev 01 3-6-2009 Draft HPNA Statistics Information HPNA Statistics Information The HPNA Statistics Info screen displays the statistics for the HPNA devices connected to the residential gateway. Path: Home Network > HPNA > HPNA Statistics Info 4030765 Rev 01 125 3-6-2009 Draft Chapter 5 Home Network Configuration Home Monitoring The Home Monitoring screen allows you to monitor your surroundings by attaching a web camera to the USB port of the residential gateway. After you connect your camera, click Run Web Camera. A popup window appears showing the camera video output. The home monitoring feature is for local use only. Path: Home Network > Services > Home Monitoring 126 4030765 Rev 01 3-6-2009 Draft 6 Chapter 6 Security Configuration The Security tab allows you to check the security configuration and modify the configuration. Use this chapter to help you check the status of the security configuration or make changes to the configuration. In This Chapter MAC Filtering Setup .......................................................................... 128 Incoming IP Filtering.......................................................................... 134 Outgoing IP Filtering ......................................................................... 141 Parental Control Setup - Filtering Function.................................... 146 URL Filtering Function ...................................................................... 151 Stateful Packet Inspection.................................................................. 156 Local Certificates................................................................................. 158 Trusted CA Certificates...................................................................... 163 4030765 Rev 01 127 3-6-2009 Draft Chapter 6 Security Configuration MAC Filtering Setup The MAC Filtering Setup screen allows you to set up filters for packets containing configured MAC addresses. With the MAC Filtering feature, you can restrict access to certain servers based on their MAC address. MAC Filtering is only effective on ATM PVCs configured in Bridge mode. Path: Security > Packet Filtering > MAC Filtering Forwarded MAC Filtering FORWARDED means that all MAC layer frames will be FORWARDED except those that match any of the specified rules in the following screen. 128 4030765 Rev 01 3-6-2009 Draft Blocked MAC Filtering BLOCKED means that all MAC layer frames will be BLOCKED except those that match any of the specified rules in the following screen. MAC Filtering Setup Adding MAC Filtering To add MAC Filtering, complete the following steps. 1 Click Security on the main screen. The Packet Filtering tab opens by default. 2 Click MAC Filtering. The MAC Filtering screen opens. 3 Check the Enable Filtering Function check box. 4 Cliick Add to open a blank MAC Filtering screen. 4030765 Rev 01 129 3-6-2009 Draft Chapter 6 Security Configuration Cl 5 6 7 8 In the Protocol Type field, select one of the following protocols from the drop-
down menu. PPPoE IPv4 IPv6 AppleTalk IPX NetBEUI IGMP In the Destination MAC Address field, enter the frame's destination MAC address. In the Source MAC Address field, enter the frame's source MAC address. In the Frame Direction field, select one of the following choices from the drop-
down menu:
LAN<->WAN WAN<->LAN 130 4030765 Rev 01 3-6-2009 Draft MAC Filtering Setup 9 Do you want to select all WAN interfaces?
If yes, check the Select All WAN Interfaces check box under the WAN Interfaces (Configured in Bridge mode only) field. If no, uncheck the Select All WAN Interfaces check box under the WAN Interfaces (Configured in Bridge mode only) field. 10 Click Save/Apply to add the MAC Filter. Forwarding or Blocking MAC Layer Frames You can change the policy on how MAC layer frames are forwarded or blocked. FORWARDED means that all MAC layer frames will be forwarded except those matching with any of the specified rules in the table on the screen. BLOCKED means that all MAC layer frames will be blocked except those matching with any of the specified rules in the table on the screen. To change the policy on how MAC layer frames are forwarded or blocked, complete the following steps. 1 Click Security on the main screen. The Packet Filtering tab opens by default. 2 Click MAC Filtering. The MAC Filtering screen opens. 3 Check the Enable Filtering Function check box. 4030765 Rev 01 131 3-6-2009 Draft Chapter 6 Security Configuration 4 Click Change Policy. The Change MAC Filtering Global Policy screen opens. In this example, the global policy for MAC filtering is "Blocked."
5 Do you want to change the Global Policy?
If yes, click Yes. If the policy is forwarded, clicking Yes changes the policy to blocked and vise versa. If no, click No and the policy remains unchanged. Removing MAC Filtering To remove a MAC filtering rule you have set up, complete the following steps. 1 Click Security on the main screen. The Packet Filtering tab opens by default. 2 Click MAC Filtering. The MAC Filtering screen opens. 3 From the MAC Filtering screen, select Remove in the Remove column next to the MAC filtering rule you wish to remove. 4 Click Remove to remove the MAC filtering. 132 4030765 Rev 01 3-6-2009 Draft Removing MAC Filtering To remove a MAC filtering rule you have set up, complete the following steps. 1 Click Security on the main screen. The Packet Filtering tab opens by default. 2 Click MAC Filtering. The MAC Filtering screen opens. MAC Filtering Setup 3 From the MAC Filtering screen, select Remove in the Remove column next to the MAC filtering rule you wish to remove. 4 Click Remove to remove the MAC filtering. 4030765 Rev 01 133 3-6-2009 Draft Chapter 6 Security Configuration Incoming IP Filtering By default, all incoming IP traffic from the WAN is blocked when the firewall is enabled. However, some IP traffic can be accepted by setting up filters. Path: Security > Packet Filtering > Incoming IP Filtering Enabling the Filtering Function To enable the filtering function, complete the following steps. 1 Click Security on the main screen. The MAC Filtering screen opens by default. 134 4030765 Rev 01 3-6-2009 Draft 2 Click Incoming IP Filtering. The Incoming IP Filtering screen opens. Incoming IP Filtering 3 Check the Enable Filtering Function check box to enable the filtering function. Adding an Incoming IP Filter You can create a filter rule to identify incoming IP traffic by specifying a new filter name and at least one condition for the filter. All of the specified conditions in this filter rule must be satisfied for the rule to take effect. To add an incoming IP filter, complete the following steps. 1 Click Security on the main screen. The MAC Filtering screen opens by default. 4030765 Rev 01 135 3-6-2009 Draft Chapter 6 Security Configuration 2 Select the Incoming IP Filtering tab. The Incoming IP Filtering screen opens. 3 Click Add. The Add IP Filter Incoming screen opens. 4 5 6 7 In the Filter Name field, enter the name of the filter. In the Protocol field, select one of the following protocols:
TCP/UDP TCP UDP ICMP In the Source IP address field, enter the source IP address of the server sending the incoming packets. In the Source Subnet Mask field, enter the subnet mask of the server sending the incoming packets. 136 4030765 Rev 01 3-6-2009 Draft Incoming IP Filtering 8 9 In the Source Port field, enter the port number of the server sending the incoming packets. You can enter one port or a range of ports using the following format: port or port:port. Example: 0:5 indicates ports 0 through 5. In the Destination IP address field, enter the destination IP address for the server receiving the packets. 10 In the Destination Subnet Mask field, enter the subnet mask for the server receiving the packets. 11 In the Destination Port field, enter the port number for the server receiving the packets. You can enter one port or a range of ports using the following format:
port or port:port. Example: 0:5 to indicates ports 0 through 5. 12 Do you want to select all of the WAN interfaces?
If yes, check the Select All field under WAN Interfaces (Configured in Routing mode and with firewall enabled only). If no, clear the Select All field under WAN Interfaces (Configured in Routing mode and with firewall enabled only). 13 Click Save/Apply to add the filter. Adding an Incoming IP Filter You can create a filter rule to identify incoming IP traffic by specifying a new filter name and at least one condition for the filter. All of the specified conditions in this filter rule must be satisfied for the rule to take effect. To add an incoming IP filter, complete the following steps. 1 Click Security on the main screen. The MAC Filtering screen opens by default. 4030765 Rev 01 137 3-6-2009 Draft Chapter 6 Security Configuration 2 Select the Incoming IP Filtering tab. The Incoming IP Filtering screen opens. 3 Click Add. The Add IP Filter Incoming screen opens. 4 5 6 In the Filter Name field, enter the name of the filter. In the Protocol field, select one of the following protocols:
TCP/UDP TCP UDP ICMP In the Source IP address field, enter the source IP address of the server sending the incoming packets. 138 4030765 Rev 01 3-6-2009 Draft Incoming IP Filtering 7 8 9 In the Source Subnet Mask field, enter the subnet mask of the server sending the incoming packets. In the Source Port field, enter the port number of the server sending the incoming packets. You can enter one port or a range of ports using the following format: port or port:port. Example: 0:5 indicates ports 0 through 5. In the Destination IP address field, enter the destination IP address for the server receiving the packets. 10 In the Destination Subnet Mask field, enter the subnet mask for the server receiving the packets. 11 In the Destination Port field, enter the port number for the server receiving the packets. You can enter one port or a range of ports using the following format:
port or port:port. Example: 0:5 to indicates ports 0 through 5. 12 Do you want to select all of the WAN interfaces?
If yes, check the Select All field under WAN Interfaces (Configured in Routing mode and with firewall enabled only). If no, clear the Select All field under WAN Interfaces (Configured in Routing mode and with firewall enabled only). 13 Click Save/Apply to add the filter. Removing an Incoming IP Filter To remove an incoming IP filter, complete the following steps. 1 Click Security on the main screen. The MAC Filtering screen opens by default. 4030765 Rev 01 139 3-6-2009 Draft Chapter 6 Security Configuration 2 Select the Incoming IP Filtering tab. The Incoming IP Filtering screen opens. 3 From the Incoming IP Filtering screen, select Remove in the Remove column next to the filter you wish to remove. 4 Click Remove to remove the filter. 140 4030765 Rev 01 3-6-2009 Draft Outgoing IP Filtering Outgoing IP Filtering By default, all outgoing IP traffic from LAN is allowed, but some IP traffic can be BLOCKED by setting up filters. Path: Security > Packet Filtering > Outgoing IP Filtering Enabling the Filtering Function To enable the outgoing IP filtering function, complete the following steps. 1 Click Security on the main screen. The MAC Filtering screen opens by default. 4030765 Rev 01 141 3-6-2009 Draft Chapter 6 Security Configuration 2 Click Outgoing IP Filtering. The Outgoing IP Filtering screen opens. 3 Check the Enable Filtering Function check box to enable the filtering function. Adding an Outgoing IP Filter To add an outgoing IP filter, complete the following steps. 1 Click Security on the main screen. The MAC Filtering screen opens by default. 142 4030765 Rev 01 3-6-2009 Draft 2 Select the Outgoing IP Filtering tab. The Outgoing IP Filtering screen opens. Outgoing IP Filtering 3 Click Add. The Add IP Filter Outgoing screen opens. 4 5 6 In the Filter Name field, enter the name of the filter. The maximum character length is... You cannot use blank spaces in the filter name. In the Protocol field, select one of the following protocols:
TCP/UDP TCP UDP ICMP In the Source IP address field, enter the source IP address for the server sending the incoming packets. 4030765 Rev 01 143 3-6-2009 Draft Chapter 6 Security Configuration 7 8 9 In the Source Subnet Mask field, enter the subnet mask for the for the server sending the incoming packets. In the Source Port field, enter the port number for the server sending the incoming packets. Use the following format: port or port:port. In the Destination IP address field, enter the destination IP address for the server receiving the packets. 10 In the Destination Subnet Mask field, enter the subnet mask for the server receiving the packets. 11 In the Destination Port field, enter the port number for the server receiving the packets. Use the following format: port or port:port. 12 Click Save/Apply to add the filter. Removing an Outgoing IP Filter To remove an outgoing IP filter, complete the following steps. 1 Click Security on the main screen. The MAC Filtering screen opens by default. 144 4030765 Rev 01 3-6-2009 Draft 2 Select the Outgoing IP Filtering tab. The Outgoing IP Filtering screen opens. Outgoing IP Filtering 3 From the Outgoing IP Filtering screen, select Remove in the Remove column next to the filter you wish to remove. 4 Click Remove to remove the filter. 4030765 Rev 01 145 3-6-2009 Draft Chapter 6 Security Configuration Parental Control Setup - Filtering Function The Client IP/MAC Filtering Setup screen allows you to configure the residential gateway to restrict access to the Internet, email, or other network services at specific days and times. You can set time restrictions for a single computer, a range or computers, or multiple computers. Path: Security >Firewall > Parental Control Adding Time of Day Restrictions The Time of Day Restrictions screen allows you to block access to the Internet for certain times of the day. This screen adds time of day restriction to a special LAN device connected to the residential gateway. The browser's MAC Address automatically displays the MAC address of the LAN device where the browser is running. To restrict other LAN devices, select the Other MAC Address option and enter the MAC address of the other LAN device. To find out the MAC address of a Windows based PC, go to a command window and type ipconfig /all. Path: Security > Firewall > Parental Control To add time of day restrictions, complete the following steps. 146 4030765 Rev 01 3-6-2009 Draft
1 | Manual 3 | Users Manual | 3.15 MiB |
1 Click Security on the main screen. The MAC Filtering screen opens by default. Parental Control Setup - Filtering Function 2 Click the Firewall tab. The Filtering Function screen opens. 4030765 Rev 01 147 3-6-2009 Draft Chapter 6 Security Configuration 3 Check the Enable Filtering Function check box to enable the filtering function. The Client IP Mac Filtering screen populates with any time restrictions that are set. 4 Click Add PC. The Add Filtering Function screen opens. 148 4030765 Rev 01 3-6-2009 Draft Parental Control Setup - Filtering Function 5 6 In the Client PC Description field, enter a description of the PC for which you want to block services. In the Choose mode field, Click IP mode or MAC mode from the drop-down menu. 7 Enter the IP address in the Client PC IP Address field, or enter the MAC address in the MAC address field depending upon the mode you selected in step 6. 9 8 Under Service Name area, check the Blocking check box for every service that you wish to filter. In the Scheduling Week Day area, check the check the check boxes next to each day where you want to set up time of day restrictions. If you want to apply the time of day restrictions to everyday, check the Everyday check box. For example, check the F, Sa, and Su check boxes to apply time of day restrictions to Friday, Saturday, and Sunday. 10 In the Time area set the time as follows:
Click the 24Hours option to apply the restrictions 24 hours a day Click the option where you select the time from the drop-down menus. Use the drop down menus to enter the time when you want the restriction to start and end. 11 Click Save/Apply to enable the time of day restrictions. Removing Time of Day Restrictions To remove time of day restrictions, complete the following steps. 1 Click Security on the main screen. The MAC Filtering screen opens by default. 4030765 Rev 01 149 3-6-2009 Draft Chapter 6 Security Configuration 2 Click the Firewall tab. The Filtering Function screen opens. 3 Check the Enable Filtering Function check box to enable the filtering function. The Mac Filtering screen populates with any time restrictions that are set. Q. to reviewers. screen changed test steps. 4 From the Configure field select Remove in the Remove column next to the time of day restriction that you wish to remove. 5 Click Remove to remove the restriction. 150 4030765 Rev 01 3-6-2009 Draft URL Filtering Function URL Filtering Function The URL Filtering Function screen allows you to block websites based on the URL address and/or key words used in the website. For example, if you have children in the home, you may want to block websites that are inappropriate for children by entering the URL or key words. Path: Security > Firewall > URL Filter Enabling URL Filtering To enable URL filtering for the firewall, complete the following steps. 4030765 Rev 01 151 3-6-2009 Draft Chapter 6 Security Configuration 1 Click Security on the main screen. The MAC Filtering screen opens by default. 2 Click the Firewall tab. The Filtering Function screen opens by default. 152 4030765 Rev 01 3-6-2009 Draft 3 Click the URL Filter tab. The URL Filtering Function screen opens. 4 Click Enable URL Filtering Function. The URL Filtering Function screen updates with blank fields for entering the URLs that you want to block. URL Filtering Function For each rule, enter the URL or keyword that you want to block. 5 6 Under Week Day, select Everyday or select the individual days on which you want the filter to take effect. 7 Under Time, select 24Hours or select the individual times that you want the filter to take effect. 8 Click Save. Removing a URL Filter To remove a URL filter from the firewall, complete the following steps. 4030765 Rev 01 153 3-6-2009 Draft Chapter 6 Security Configuration 1 Click Security on the main screen. The MAC Filtering screen opens by default. 2 Click the Firewall tab. The Filtering Function screen opens by default. 3 Click the URL Filter tab. The URL Filtering Function screen opens. 154 4030765 Rev 01 3-6-2009 Draft 4 Click Enable URL Filtering Function. The URL Filtering Function screen updates with blank fields for entering the URLs that you want to block. URL Filtering Function 5 Click Del next to each rule that you want to delete. If you want to remove all the rules, click Remove All. 6 Click Save. 4030765 Rev 01 155 3-6-2009 Draft Chapter 6 Security Configuration Stateful Packet Inspection The Stateful Packet Inspection screen allows you to use stateful packet inspection
(SPI) to detect and prevent certain types of network attacks such as DoS (denial-of-
service) attacks. Q. to reviewers provide more detail. Path: Security > Firewall > Stateful Packet Inspection Enabling Stateful Packet Inspection To enable stateful packet inspection (SPI), complete the following steps. 1 Click Security on the main screen. The MAC Filtering screen opens by default. 156 4030765 Rev 01 3-6-2009 Draft 2 Click the Firewall tab. The Filtering Function screen opens by default. Stateful Packet Inspection 3 Click the Stateful Packet Inspection tab. The Intrusion Detection screen opens. 4 Select the Enable SPI, Hacker Pattern and Anti-Dos Firewall field. Q. to reviewers: What about the Enable Email ALert field?
5 Click Save/Apply to enable stateful packet inspection. 4030765 Rev 01 157 3-6-2009 Draft Chapter 6 Security Configuration Local Certificates The Local Certificates screen allows you to load certificates onto the residential gateway. Local certificates are used by peers to verify your identity. A maximum of four certificates can be stored on the residential gateway. Path: Security > Certificate > Local > Local Certificates Creating Certificates The Create Certificate screen allows you to generate a certificate by specifying certificate parameters shown in this screen. To create a certificate, complete the following steps. 1 Click Security on the main screen. The MAC Filtering screen opens by default. 158 4030765 Rev 01 3-6-2009 Draft 2 Click Certificate. The Local Certificates screen opens. Local Certificates 3 Click Create Certificate Request. The Create New Certificate Request screen opens. 4 5 6 7 8 In the Certificate Name field, enter the name for the certificate. In the Common Name field, enter the common name of the certificate. In the Organization Name field, enter the name of the organization that owns the certificate. In the State/Province Name field, enter the state or province where you want to register the certificate. In the Country/Region Name field, use the drop-down list to select the country or region where you want to register the certificate. 9 Click Apply to create the certificate. The certificate signing request screen opens. 4030765 Rev 01 159 3-6-2009 Draft Chapter 6 Security Configuration 10 Click Load Signed Certificate to save the certificate on the residential gateway. Importing Local Certificates The Import Certificate screen allows you to import a pre-existing certificate to the residential gateway. To import a certificate, complete the following steps. 1 Click Security on the main screen. The MAC Filtering screen opens by default. 160 4030765 Rev 01 3-6-2009 Draft 2 Click Certificate. The Local Certificates screen opens. Local Certificates 3 Click Import Certificate. The Import certificate screen opens. 4 In the Certificate Name field, enter the name of the certificate. 4030765 Rev 01 161 3-6-2009 Draft Chapter 6 Security Configuration 5 6 In the Certificate area, copy and paste the contents of the certificate file provided by the service provider. In the Private Key area, copy and paste the private key from the certificate file provided by the service provider. 7 Click Apply to save the certificate on the residential gateway. 162 4030765 Rev 01 3-6-2009 Draft Trusted CA Certificates Trusted CA Certificates The Trusted CA (Certificate Authority) Certificates screen allows you to load certificates onto the residential gateway. You can use CA certificates to verify peers'
certificates. A maximum of four certificates can be stored. Path: Security > Certificate > Trusted CA > Trusted CA (Certificate Authority) Certificates Importing Trusted CA Certificates The Import CA certificate screen allows you to import a pre-existing trusted CA certificate to the residential gateway. 1 Click Security on the main screen. The MAC Filtering screen opens by default. 4030765 Rev 01 163 3-6-2009 Draft Chapter 6 Security Configuration 2 Click Certificate. The Local Certificates screen opens. 3 Click the Trusted CA tab. The Trusted CA (Certificate Authority) Certificates screen opens. 164 4030765 Rev 01 3-6-2009 Draft 4 Click Import Certificate. The Import CA Certificate screen opens. Trusted CA Certificates 5 6 In the Certificate Name field, enter the name of the certificate. In the Certificate area, copy and paste the contents of the certificate file provided by the service provider. 7 Click Apply to save the CA certificate on the residential gateway. 4030765 Rev 01 165 3-6-2009 Draft 3-6-2009 Draft 7 Chapter 7 Advanced Configuration The Advanced tab lets you to check the quality of service and IP traffic over your network and to change the configuration. Use this chapter to check the status of the more advanced features of your residential gateway, such as port mapping and DNS server configuration, and to change the configuration. In This Chapter Upstream Quality of Service ............................................................. 168 Remote Management ......................................................................... 171 Port Mapping ...................................................................................... 173 Creating Certificates........................................................................... 176 Virtual Servers Setup.......................................................................... 178 Port Triggering Setup......................................................................... 182 DMZ Host Setup ................................................................................. 186 DNS Server Configuration ................................................................ 187 Dynamic DNS...................................................................................... 188 Default Gateway Routing.................................................................. 191 Internet Group Management Protocol............................................. 193 IPSec Settings....................................................................................... 194 4030765 Rev 01 167 3-6-2009 Draft Chapter 7 Advanced Configuration Upstream Quality of Service The Upstream Quality of Service screen allows you to configure the Quality of Service (QoS) settings for the residential gateway. Path: Advanced > QoS > Upstream Quality of Service Q. to reviewers: Screen alignment is off. Adding Upstream Quality of Service Settings To add upstream Quality of Service settings, complete the following steps. 1 Click Advanced on the main screen. The Upstream Quality of Service screen opens. 168 4030765 Rev 01 3-6-2009 Draft 2 Click Add. The Add Upstream QoS Rule screen opens. Upstream Quality of Service 3 4 5 6 7 8 9 In the Name field, enter the name of the QoS rule. In the LAN Port field, select the LAN port for which you want to apply the rule. In the Protocol field, select the protocol that you want to use from the following options:
TCP/UDP TCP UDP ICMP In the IP Address field, enter the source and destination addresses. In the Subnet Mask field, enter the source and destination subnet masks. In the Port Number field, enter the source and destination ports. In the MAC address field, enter the MAC address for the source from which the packets are being sent. 10 In the MAC Mask field, enter the mask for the source from which the packets are being sent. Q. to reviewers Fields changed update 4030765 Rev 01 169 3-6-2009 Draft Chapter 7 Advanced Configuration 11 Select the Marker field and choose from the list of Diffserv code point (DSCP) values. 12 Select the Queue field and choose from the list of queues. 13 Click Save. 170 4030765 Rev 01 3-6-2009 Draft Remote Management Remote Management The Remote Management -- TR-O69 Client screen allows an autoconfiguration server (ACS) to perform autoconfiguration, provisioning, collection of statistics, and diagnostics for this residential gateway. Path: Advanced > Remote Management Configuring the TR-069 Client Options To configure the TR-069 client options, complete the following steps. 4030765 Rev 01 171 3-6-2009 Draft Chapter 7 Advanced Configuration 1 Click Advanced on the main screen. The Remote Management -- TR-069 Client screen opens. 2 3 4 5 6 7 8 9 In the Inform field, choose one of the following options:
Click Enable to to enable the periodic "inform" messages from the residential gateway. Click Disable to disable the inform messages to the residential gateway. In the Inform Interval field, enter frequency that the inform messages are sent from the residential gateway to the autoconfiguration server. In the ACS URL field, enter the URL for the autoconfiguration server. In the ACS User Name field, enter the user name for autoconfiguration server. In the ACS Password field, enter the password for the autoconfiguration server. Select the Connection Request Authentication field. In the Connection Request User Name field, enter the name of the connection request. In the Connection Request Password field, enter the password for the connection request. 10 Click GetRPCMethods to obtain the list of remote procedural calls (RPC) supported by the autoconfiguration server. 11 Click Save/Apply to save the configuration changes. 172 4030765 Rev 01 3-6-2009 Draft Port Mapping Port Mapping The Port Mapping screen allows you to specify which traffic will be transmitted over the WAN interface. Traffic is classified by ingress port, such as Ethernet port, or by DHCP option settings. Port Mapping supports multiple ports to PVC and bridging groups. Each group will perform as an independent network. To support this feature, you must create mapping groups with appropriate LAN and WAN interfaces. Path: Advanced > Port Mapping Adding Port Mapping To add port mapping, complete the following steps. CAUTION:
This procedure is for administrators only. Incorrectly using this function can adversely affect your system operation. 1 Click Advanced on the main screen. The Upstream Quality of Service screen opens. 4030765 Rev 01 173 3-6-2009 Draft Chapter 7 Advanced Configuration 2 Click the Port Mapping tab. The Port Mapping screen opens. 3 4 Select the Enable virtual ports on field if you want to use the port mapping feature. Select Enable Diffserv to 802.1p conversion if you want to convert diffserv code points to 802.1p tags. 174 4030765 Rev 01 3-6-2009 Draft 5 Click Add. The Port Mapping Configuration screen opens. Port Mapping 6 7 8 In the Group Name field, enter the name of the group. The group name must be unique. For example, enter IPTV. For the Grouped Interfaces field, select interfaces from the Available Interfaces list and add them to the grouped interface list using the arrow buttons to create the required mapping of the ports. In the Automatically Add Clients With the following DHCP Vendor IDs, add the DHCP option 60 [vendor ID option] string for the devices (typically IP set-tops) attached to the residential gateway. 9 Click Save/Apply. 4030765 Rev 01 175 3-6-2009 Draft Chapter 7 Advanced Configuration Creating Certificates The Create Certificate screen allows you to generate a certificate by specifying certificate parameters shown in this screen. To create a certificate, complete the following steps. 1 Click Security on the main screen. The MAC Filtering screen opens by default. 2 Click Certificate. The Local Certificates screen opens. 176 4030765 Rev 01 3-6-2009 Draft 3 Click Create Certificate Request. The Create New Certificate Request screen opens. Creating Certificates 4 5 6 7 8 In the Certificate Name field, enter the name for the certificate. In the Common Name field, enter the common name of the certificate. In the Organization Name field, enter the name of the organization that owns the certificate. In the State/Province Name field, enter the state or province where you want to register the certificate. In the Country/Region Name field, use the drop-down list to select the country or region where you want to register the certificate. 9 Click Apply to create the certificate. The certificate signing request screen opens. 10 Click Load Signed Certificate to save the certificate on the residential gateway. 4030765 Rev 01 177 3-6-2009 Draft Chapter 7 Advanced Configuration Virtual Servers Setup The NAT -- Virtual Servers Setup screen allows you to configure servers to which you want to forward IP packets that belong to a specific service. Path: Advanced > IP Networking > NAT > Virtual Servers Adding a Virtual Server To add and configure a virtual server, complete the following steps. 1 Click Advanced on the main screen. 2 Click IP Networking. The NAT screen opens. 178 4030765 Rev 01 3-6-2009 Draft 3 Click Virtual Servers.The Virtual Servers screen opens. Virtual Servers Setup 4030765 Rev 01 179 3-6-2009 Draft Chapter 7 Advanced Configuration 4 From the Virtual Servers Setup screen, click Add. The NAT Virtual Servers screen opens. 5 Under Server Name, choose one of the following:
Click Select a Service, and choose a service from the drop-down list. OR Click Custom Server, and enter a server name and the Server IP Address. In the Server IP Address field, enter the IP address for the server. 6 7 Under Protocol, select TCP, UDP, TCP/UDP. 8 Click Save/Apply to add the virtual server. Removing a Virtual Server To remove a virtual server, complete the following steps. 1 Click Advanced on the main screen. 180 4030765 Rev 01 3-6-2009 Draft 2 Click IP Networking. The NAT screen opens. Virtual Servers Setup 3 Click Virtual Servers.The Virtual Servers screen opens. 4 From the NAT Virtual Servers Setup screen, select Remove in the Remove column next to the server you wish to remove. 5 Click Remove to remove the NAT Virtual Server. 4030765 Rev 01 181 3-6-2009 Draft Chapter 7 Advanced Configuration Port Triggering Setup Some applications require that specific ports in the router's firewall be opened for access by the remote parties. The Port Triggering feature dynamically opens up the
"Open Ports" in the firewall when an application on the LAN initiates a TCP/UDP connection to a remote party using the Triggering Ports feature. The router allows the remote party from the WAN side to establish new connections with the application on the LAN side using the open ports. A maximum of 32 entries can be configured. The NAT -- Port Triggering screen allows you to configure servers to which you want to forward IP packets that belong to a specific service. Path: Advanced > IP Networking > NAT > Port Triggering > NAT -- Port Triggering Opening a Port on the Firewall To open a port on the firewall, complete the following steps. 1 CClick Advanced on the main screen. 2 Click IP Networking. The NAT screen opens. 182 4030765 Rev 01 3-6-2009 Draft 3 Click Port Triggering. The NAT -- Port Triggering screen opens. Port Triggering Setup 4 From the NAT -- Port Triggering screen, click Add. The NAT Port Triggering screen opens with a list of available protocols. 5 Under Application Name, choose one of the following:
Click Select an Application and choose an application from the drop-down list. OR Click Custom Application, and enter a name for the application. 4030765 Rev 01 183 3-6-2009 Draft Chapter 7 Advanced Configuration 6 Complete the fields on the screen as follows:
Under Trigger Port Start, enter the time that you want to open the trigger port on the firewall. Under Trigger Port End, enter the time that you want to close the trigger port on the firewall. Under Trigger Protocol, select TCP/UDP, TCP or UDP. Under Open Port Start, enter the starting port number for the ports that you want to open on the firewall. Under Open Port End, enter the ending port number for the ports that you want to open on the firewall. Under Open Protocol, select TCP/UDP, TCP or UDP. 7 Click Save/Apply to open the ports on the firewall. Closing a Port on the Firewall To close a port on the firewall, complete the following steps. 1 Click Advanced on the main screen. 2 Click IP Networking. The NAT screen opens. 184 4030765 Rev 01 3-6-2009 Draft 3 Click Port Triggering. The NAT -- Port Triggering screen opens. Port Triggering Setup 4 From the NAT -- Port Triggering screen, click Remove in the Remove column next to the port you wish to close. 5 Click Remove. The port you selected is closed. 4030765 Rev 01 185 3-6-2009 Draft Chapter 7 Advanced Configuration DMZ Host Setup The NAT -- DMZ Host screen allows the IP packets from the WAN that do not belong to any of the applications configured in the Virtual Servers table to be forwarded to the DMZ (demilitarized zone) host computer. Path: Advanced > IP Networking > NAT > DMZ Host > NAT -- DMZ Host Activate the DMZ Host In the DMZ Host IP Address field, enter the computer's IP address and click Save/Apply to activate the DMZ host. Deactivate the DMZ Host Clear the DMZ Host IP Address field and click Save/Apply to deactivate the DMZ host. 186 4030765 Rev 01 3-6-2009 Draft DNS Server Configuration DNS Server Configuration The DNS Server Configuration screen allows you to configure the Domain Name Server (DNS). If the Enable Automatic Assigned DNS check box is selected, this router will accept the first received DNS assignment from one of the PPPoA, PPPoE or MER/DHCP enabled PVC(s) during the connection establishment. If the check box is not checked, enter the primary and optional secondary IP address or domain name address of the DNS server to establish connection. Click Save to save the new configuration. You must reboot the router to make the new configuration effective. Path: Advanced > IP Networking > DNS > DNS Server 4030765 Rev 01 187 3-6-2009 Draft Chapter 7 Advanced Configuration Dynamic DNS The Dynamic DNS screen allows you to alias a dynamic IP address to a static hostname in any of the many domains. The alias allows your DSL router to be more easily accessed from various locations on the Internet. Path: Advanced > IP Networking > DNS > Dynamic DNS Adding an Alias for A Dynamic IPAddress to a Static Host Name To alias a dynamic IP address to a static host name, complete the following steps. 1 Click Advanced on the main screen. 2 Click IP Networking. The NAT screen opens. 188 4030765 Rev 01 3-6-2009 Draft 3 Click DNS. The DNS screen opens. Dynamic DNS 4 Click Dynamic DNS. The Dynamic DNS screen opens. 5 Click Add on the Dynamic DNS screen. The Add dynamic DDNS screen opens. Q. to reviewers Dynamic should be a capital D on screen. 6 7 In the D-DNS provider field, select the provider from the drop-down list. In the Hostname field, enter the name of the host. 4030765 Rev 01 189 3-6-2009 Draft Chapter 7 Advanced Configuration In the Interface field, select the interface from the drop-down list. 8 9 Under DynNDS Settings, enter your user name and password. 10 Click Save/Apply. 190 4030765 Rev 01 3-6-2009 Draft Default Gateway Routing Default Gateway Routing The Default Gateway screen allows you to make gateway assignments for devices that are connected to the residential gateway. Note: If you change the Enable Automatic Assigned Default Gateway check box from unselected to selected, you must reboot the router to get the automatic assigned default gateway. Path: Advanced > IP Networking > Routing > Default Gateway Assigning Default Gateways To assign a default gateway, complete the following steps. 1 Click Advanced on the main screen. 2 Click IP Networking. The NAT screen opens. 4030765 Rev 01 191 3-6-2009 Draft Chapter 7 Advanced Configuration 3 Click Routing. The Routing screen opens. 4 Click Default Gateway. The Default Gateway screen opens. 5 Do you want to enable the automatic assigned defautl gateway?
If yes, be sure the Enable Automatic Assigned Default Gateway check box is checked. If this check box is checked, the residential gateway will accept the first received default gateway assignment from one of the PPPoA, PPPoE or MER/DHCP enabled PVC(s). If no, be sure the Enable Automatic Assigned Default Gateway check box is not checked. If the check box is not checked, enter the static default gateway AND/OR a WAN interface. 6 Click Save/Apply to save your selection. 192 4030765 Rev 01 3-6-2009 Draft Internet Group Management Protocol Internet Group Management Protocol IGMP screen allows you to configure the Internet group management protocol
(IGMP) parameters. The Internet Group Management Protocol is a communications protocol that is used to manage the membership of Internet Protocol multicast groups. Routers use IGMP to manage multicasting. The IGMP messages are used to determine which hosts are part of which multicast groups. Path: Advanced > IP Networking > IGMP Enabling IGMP Snooping IGMP snooping is???? Reviewer question The To enable IGMP snooping, complete the following steps. 1 2 3 4 5 6 Select the Enable IGMP snooping field. In the Query Interval field, enter the interval in seconds. In the Query Response Interval field, enter the interval in seconds. In the Query Version field, choose the version from the drop-down list. In the Last member Query Interval field, enter the interval in seconds. In the Last member Query Count field, enter the number of times you want the system to query. 7 Click Save/Reboot to save your changes and reboot the system. 4030765 Rev 01 193 3-6-2009 Draft Chapter 7 Advanced Configuration IPSec Settings The IPSec Settings screen allows you to configure IP security settings for the residential gateway. Path: Advanced > IP Networking > IPSec Adding an IPSec Connection To add an IPSec connection, complete the following steps. 1 Click Advanced on the main screen. 2 Click IP Networking. The NAT screen opens. 3 Click IPSec. The IPSec Settings screen opens. 194 4030765 Rev 01 3-6-2009 Draft 4 Click Add New Connection. The IPSec Settings screen opens. IPSec Settings 5 6 7 In the IPSec Connection Name field, enter the name of the connection. In the Remote IPSec Gateway Address field, enter the gateway address for the remote IPSec gateway. In the Tunnel access from local IP addresses field, select Subnet or Single Address. In the IP Address for VPN, enter the IP address for the VPN connection. In the IP Subnetmask field, enter the subnet mask for the VPN IP address. 8 9 10 In the Key Exchange Method field, select Auto(IKE) or manual. 11 In the Authentication Method field, select Pre-Shared Key or Certificate (X.509). 12 Depending upon the authentication method that you selected, do one of the following:
If you selected Pre-Shared Key, enter the name of the key in the Pre-Shared Key field. OR If you selected Certificate (X.509), select a certificate from the drop-down list of certificates in the Certificate field. 13 In the Perfect Forward Secrecy field, select one of the following options:
If you select Enable, Perfect Forward Secrecy is enabled. OR If you select Disable, Perfect Forward Secrecy is disabled. 4030765 Rev 01 195 3-6-2009 Draft Chapter 7 Advanced Configuration 14 Do you want to configure the advanced settings?
If yes, in the Advanced IKE Settings field, click Show Advanced Settings to populate the screen with advanced settings. If no, go to step 17. 15 Complete the advanced settings as follows:
In the Phase 1 Mode field, select Main or Aggressive. a b In the Encryption Algorithm field, select one of the following encryption algorithms:
3DES AES -128 AES - 192 AES - 256 In the Integrity Algorithm field, select MD5 or SHA1. c d In the Select Diffie-Hellman Group for Key Exchange field, select one of the following options:
768 bit 1024 bit 1536 bit 2048 bit 3072 bit 4096 bit 6144 bit 8192 bit In the Key Life Time, enter the life of the key in seconds. e 16 Repeat step 15 for each phase. 17 Click Save/Apply to save your settings. 196 4030765 Rev 01 3-6-2009 Draft 8 Chapter 8 Customer Information Introduction This chapter provides contact information to obtain product support and return products for service. In This Chapter Customer Support .............................................................................. 198 Return Products for Repair................................................................ 200 4030765 Rev 01 197 3-6-2009 Draft Chapter 8 Customer Information Customer Support If You Have Questions If you have questions about this product, contact the representative who handles your account for information. If you have technical questions, telephone your nearest technical support office at one of the following telephone numbers. The Americas United States Cisco Services Atlanta, Georgia The United Kingdom and Europe Europe European Technical Assistance Center
(EuTAC), Belgium Technical Support For Digital Broadband Delivery System products only, call:
Toll-free: 1-800-283-2636 Local: 770-236-2200 Fax: 770-236-2488 For all products other than Digital Broadband Delivery System, call:
Toll-free: 1-800-722-2009 Local: 678-277-1120 Fax: 770-236-2306 Customer Service Toll-free: 1-800-722-2009 Local: 678-277-1120 Fax: 770-236-5477 Product Information Telephone: 32-56-445-444 Technical Support Telephone: 32-56-445-197 or 32-56-445-155 Fax: 32-56-445-061 Asia-Pacific China Hong Kong Technical Support Telephone: 011-852-2588-4745 Fax: 011-852-2588-3139 198 4030765 Rev 01 3-6-2009 Draft Customer Support Australia Australia Sydney Japan Japan Tokyo Technical Support Telephone: 011-61-2-8446-5374 Fax: 011-61-2-8446-8015 Technical Support Telephone: 011-81-3-5322-2067 Fax: 011-81-3-5322-1311 Additional Information Access your company's extranet site to view or order additional technical publications. For accessing instructions, contact the representative who handles your account. Check your extranet site often as the information is updated frequently. 4030765 Rev 01 199 3-6-2009 Draft Chapter 8 Customer Information Return Products for Repair You must obtain a return material authorization (RMA) number before you send products to us for repair or upgrade. To return a product for repair or upgrade, complete the following steps. 1 Obtain the following information about the product that you want to return for repair or upgrade:
The name and model number (if applicable) of the product and the quantity of returns A reason for the return, such as upgrade or failure symptom Your company name, contact, telephone number, email address, fax number, repair disposition authority, and any service contract details A purchase order number Notes:
If you are unable to issue a purchase order at the time you request an RMA number, a proforma invoice will be sent to you at the completion of repair. This invoice lists all costs incurred. We must receive a purchase order within 15 days of receipt of proforma. Important: In-warranty products can accrue costs through damage or misuse, or if no problem is found. Products incurring costs will not be returned to the customer without a valid purchase order. 2 Telephone or fax Factory Services at one of the following numbers to request an RMA number:
From North America, call:
Tel: 1-800-722-2009 Fax: 770-236-5477 From Europe, Middle East, or Africa, call:
Tel: 32-56-445-444 Fax: 32-56-445-051 From Latin America, call:
Tel: 1-770-236-5662 Fax: 1-770-236-5888 From Asia Pacific, call:
Tel: 852-2588-4746 Fax: 852-2588-3139 Result: The customer service representative will provide the RMA number and the shipping instructions to you. Note: RMA numbers are only valid for 60 days. You must contact a customer service representative to revalidate your RMA numbers if the number is older than 60 days. After the RMA number is revalidated, you can return the product. 200 4030765 Rev 01 3-6-2009 Draft Return Products for Repair 3 Pack the product in its original container and protective packing material. Important:
If the original container and packing material are no longer available, pack the product in a sturdy, corrugated box and cushion it with packing material that is appropriate for the method of shipping. You are responsible for delivering the returned goods to us safely and undamaged. Improperly packaged shipments, which may have caused additional damage, may be refused and returned to you at your expense. Do not return any power cords or accessories. 4 Write the following information on the outside of the container:
Your name Your complete address Your Telephone number RMA number Problem description (for product failures) Important: Absence of the RMA number may delay processing your product for repair. Include the RMA number in all correspondence. Ship the product to the address you receive from the customer service representative. Important: We do not accept freight collect. Be sure to prepay all shipments. 5 4030765 Rev 01 201 3-6-2009 Draft 678.277.1000 www.scientificatlanta.com Service Provider Video Technology Group 5030 Sugarloaf Parkway, Box 465447 Lawrenceville, GA 30042 This document includes various trademarks of Cisco Systems, Inc. Please see the Notices section of this document for a list of the Cisco Systems, Inc. trademarks used in this document. Product and service availability are subject to change without notice. 2009 Cisco Systems, Inc. All rights reserved. March 2009 Printed in United States of America Part Number 4030765 Rev 01 3-6-2009 Draft
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2009-03-17 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2009-03-17
|
||||
1 | Applicant's complete, legal business name |
Gemtek Technology Co., Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0005801899
|
||||
1 | Physical Address |
No.15-1 Zhonghua Road
|
||||
1 |
Hukou Hsinchu, N/A 303
|
|||||
1 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@curtis-straus.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
MXF
|
||||
1 | Equipment Product Code |
ADV980114G
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
A****** W********
|
||||
1 | Title |
Manager
|
||||
1 | Telephone Number |
886 3******** Extension:
|
||||
1 | Fax Number |
886 3********
|
||||
1 |
A******@gemteks.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
|
||||
1 | Name |
G****** C****
|
||||
1 | Physical Address |
No. 19, Hwa Ya 2nd Rd., Kwei Shan Hsiang
|
||||
1 |
Taoyuan Hsien, 333
|
|||||
1 |
Taiwan
|
|||||
1 | Telephone Number |
886-3******** Extension:
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
G******@adt.com.tw
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
|
||||
1 | Name |
E**** W******
|
||||
1 | Physical Address |
No. 19, Hwa Ya 2nd Rd., Kwei Shan Hsiang
|
||||
1 |
Taoyuan Hsien, 333
|
|||||
1 |
Taiwan
|
|||||
1 | Telephone Number |
886-3******** Extension:
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
e******@adt.com.tw
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | DDR2201 v1 ADSL2+ Residential Gateway | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End -users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
|
||||
1 | Name |
R**** C******
|
||||
1 | Telephone Number |
886-3******** Extension:
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
r******@tw.bureauveritas.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 20 28 68 | 2412.00000000 | 2462.00000000 | 0.1500000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC