FCC ID: MXF-WLTFGT145EUD WLTFGT-145ACN LTE Cat 12 B48 Indoor CPE

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/5170273.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case LTE IDU Quick installation Guide WLTFGT-145ACN LTE Indoor CPE Copyright This DOCUMENT is copyrighted with all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the written permission of Gemtek Technology Co. Ltd. Notice Gemtek reserves the right to change specifications without prior notice. While the information in this document has been compiled with great care, it may not be deemed an assurance of product characteristics. Gemtek shall be liable only to the degree specified in the terms of sale and delivery. The reproduction and distribution of the documentation and software supplied with this product and the use of its contents is subject to written authorization from Gemtek. Contents Copyright Notice Contents ................................................................................ 1 1. About this Guide ................................................................ 2 2. Whats in the box? ............................................................. 2 3. LED Indicators ..

4. Connectors..5 5. Installation..6 6. Easy Setup7 7. Wi-Fi Setting ................................... !

1 1. About this Guide This document provides information and procedures on installation and configuration of LTE Indoor CPE. You could utilize the theoretical information in this guide to setup your device. This Quick Installation Guide covers the basic installation of the LTE Indoor Gateway. 2. Whats in the box?

Here's a quick checklist of everything inside your box. Before installing the CPE, verify that you have all the items listed in the package checklist. If any of the items are missing or damaged, contact your LTE service provider. The LTE Indoor CPE Quick installation Guide Power Adapter CAT5e 8-wire Ethernet cable for connecting IDU and computer 2 3. LED Indicators 3 LED Indication 1 Power Icon Status Description ON OFF ON Power ON Power OFF Wi-Fi ON 2 2.4 WiFi Blinking Transmitting data OFF ON Wi-Fi OFF Wi-Fi ON 3 5 WiFi Blinking Transmitting data 4 WPS OFF Wi-Fi OFF Blinking Searching for Connection ON Connection confirm

(will be off after 5 seconds) Display signal strength SINR < 7dB

(Blinking: No SIM Card) 1 LED: 7dB SINR < 11dB 5 Signal Strength ON 2 LED: 11dB SINR < 18dB 3 LED: 18dB SINR < 23dB 4 LED: 23dB < SINR 6 7 Firmware Upgrade Reset OFF LTE OFF Electronic scrolling marquee All LEDs are blinking 4 4. Connectors Connector Power Description The power port is where you connect the power

(DC-12V Port) adapter. Power On/Off Switch LAN RJ -45 The on/off switch support to turn on device The LAN port allows you to connect Modem to your PC or Hub using a Cat.5/6 Ethernet network cable. USB Type A Host Support USB 2.0 Host 1 2 3 4 5 WPS Holds down the button for 5 seconds to enable WPS function. 6 7 USIM Slot Support 2FF size ; 1.8V/3.3V USIM for LTE Mode Reset Press the button for 5 seconds to reset the setting back to factory default. 5 5. Installation Please follow the steps below to install the device:

Step1: Insert SIM card into the device with right direction. Step2: Connect the device LAN port to your PC with a RJ-45 Ethernet cable that is supplied. Step3: Insert the power cord into the LTE Indoor CPE's DC-12V power jack; and insert the plug into power outlet. Step4: Switch ON the power. The device will start the booting process. After a few seconds, the LED lights will start blinking. 6 6. Easy Setup Please follow the steps below to configure your device through the web interface:

Step1: Open the Web browser (Internet Explorer) and enter the default IP address of the IDU CPE : http://192.168.15.1 Step2: Enter username/password to access the web management interface. Username : admin Password : admin Step3: The page displays in your browser after login; you can simply configure the device settings. Signal strength indicator on the upper-left corner of webpage. 7 7. WiFi Setting Select WiFi from main menu. Then screen will display the default setting of SSID, radio channel, working mode, and SSID broadcast. WiFi Status:

WiFi 2.4G Settings:

8 WiFi 5G Settings:

9 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 10

Gemiek No.15-4 Zhonghua Road, Hsinchu industrial Park Wireless Broadband Anywhere Hukou, Hsinchu, Taiwan 303 Web Site: www.gemtek.com.tw Phone: +886-3-598-5535 E-Mail: adam@gemteks.com FAX: +886-3-598-5585 Date: March 19, 2021 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for confidentiality FCC ID: MXF-WLTFGT145EUD To whom it may concern:

Short-term confidentiality Pursuant to DA 04-1705 of the Commission's pubic notice, in order to comply with the marketing regulations in 47CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential untit the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after issue date. Internal Photographs External Photographs User's manual Test Set up photo Permanent confidentiality Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below:

Block Diagram Schematics Operational Description Bill of Materials Tune up procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Adam Wang/ Director Engineering Dept. Gemtek Technology Co., Ltd. Tel: 886 3-598-5535*1411 Fax: 886 3-597-6663 E-mail: adam@gemteks.com

Gemiek Wireless Broadband Anywhere No.15-1 Zhonghua Road, Hsinchu Industrial Park Hukou, Hsinchu, Taiwan 303 Web Site: www.gemtek.com.tw Phone: +886-3-598-5535 E-Mail: adam@gemteks.com FAX: +886-3-598-5585 Date: March 19, 2021 Subject: Ad Hoc Mode Function Declaration FCC ID: MXF-WLTFGT145EUD To Whom it may concern, We, Gemtek Technology Co., Ltd. declare that the device does not support any non-US channels, country code selection and Channel 12 and 13 in 2.4 GHz band in all the operational mode(s). Adam Wang/ Direct Engineering Dept. Gemtek Technology Co., Ltd. Tel: 886 3-598-5535*1411 Fax: 886 3-597-6663 E-mail: adam@gemteks.com

Gemiek Wireless Broadband Anywhere No.15-1 Zhonghua Road, Hsinchu Industrial Park, Hukou, Hsinchu, Taiwan 303 Web Site: www.gemtek.com.tw Phone: +886-3-598-5535 E-Mail: adam@gemteks.com FAX: +886-3-598-5585 Product Equality declaration Letter We, Gemtek Technology Co., Ltd. declare that difference between FCC ID: MXF-WLTFGT145CBSD and MXF-WLTFGT145EUD is only software and output power index of LTE Band 48. Hardware is identical to each FCC ID.

): WLTFGTI45CBSD | FCC ID: MXF-WLTFGT145EUD |

Function | ID:

2412 MHz ~ 2462 MHz 2412 MHz ~ 2462 MHz 5180 MHz ~ 5240 MHz 5180 MHz ~ 5240 MHz Wi-Fi jo | 5745 MHz ~ 5825 MHz 5745 MHz ~ 5825 MHz ITE 3555 MHz ~ 3695 MHz 3555 MHz ~ 3695 MHz Operation mode: CPE-CBSD | Operation mode: End User device Adam Wang/ Director Engineering Dept. Gemtek Technology Co., Ltd. Tel: 886 3-598-5535"1411 Fax: 886 3-597-6663 E-mail: adam@gemteks.com

Gemiek No.15-1 Zhonghua Road, Hsinchu Industrial Park Wireless Broadband Anywhere Hukou, Hsinchu, Taiwan 303 Web Site: www.gemtek.com.tw Phone: +886-3-598-5535 E-Mail: adam@gemteks.com FAX: +886-3-598-5585 Date: 2021/3/19 Federal Communications Commission 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Product Certification Representative Authorization Letter FCC ID: M To whom it may concern:

We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for equipment authorization of model WLTFGT-145ACN . the FCC Rules and Regulations. International Certification Corp. No.3-1, Lane 6, Wen San 3rd St. Kwei Shan Dist., TaoYuan City 333, Taiwan (R.O.C.) Name: Gary Chang Job Title : Manager e-mail : garychang@icertifi.com.tw Address :

We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 862. This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Adam Wang/ Director Engineering Dept. Gemtek Technology Co., Ltd. Tel: 886 3-598-5535*1411 Fax: 886 3-597-6663 E-mail: adam@gemteks.com

Gemitek No.15-1 Zhonghua Road, Hsinchu Indusirial Park Wireless Broadband Anywhere Hukou, Hsinchu, Taiwan 303 Web Site: www.gemtek.com.tw Phone: +886-3-598-5535 E-Mail: adam@gemteks.com FAX: +886-3-598-5585 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Date: Mai Subject: FCC Application for FCC ID: M} T145EUD To Whom it may concern, We, the undersigned, would like to declare that the device supports transmit power control capability and the capability to limit maximum EIRP in response to instructions from their associated CBSDs and limit operating power to the minimum necessary for successful operations. Adam Wang/ Director Engineering Dept. Gemtek Technology Co., Ltd. Tel: 886 3-598-5535*1411 Fax: 886 3-597-6663 E-mail: adam@gemteks.com