FCC ID: VDE20242021950 Generac Fuel Tracker Gen 5, LTE

GENERAC Generac Fuel Tracker Gen 5, LTE a Model: CGSRUU-M950 Fe @ 304339

& support@mobilelinkgen.com , 1-855-436-8439 FCC ID: vE20242021950.1:80364-20242021950 Device Uses Approved Radio: BG9SOA-GL fori}

Contains FCC ID: XWRZO2IBGBS0AGL. Contains Ic 102244202186350A 40C < Temb < 40C CLI, DIV2, GP D, T3C 1P66/1P68, Type 4 Must be used with a Generac sensor certified for CI D2 Gr D at 40C < Tamb s 40C, TI2XQW93GH MADE IN MALAYSIA 4 Warning: Explosion Hazard. Do not remove or replace Unless the area is free of ignitable concentrations. 4 Avertissement: Risque DExplosion. Ne pas retirer nl replacer a moins dans un emplacement exempt de concentrations inflammables,

"High Frequency Ceramic Solutions"

2.4GHz Mini Antenna, SMT 7/9/2018 Detail Specification:

Let us help you with the antenna design, optimization, and tuning!

P/N 2450AT18A100 Page 1 of 5 General Specifications Part Number 2450AT18A100 Frequency (MHz) 2400 - 2500 Avg. Rad Efficiency*

Peak Gain (dBi typ.) Average Gain (dBi typ.) 76%

0.5

-0.5 Return Loss (dB) 9.5 min. Impedance Input Power 50 2 Watts max. (CW)

*Efficiency based on Johanson's standard evaluation board Part Number Explanation Storage Period Storage Temperature Operating Temperature Reel Quantity 18 months max.

-40 to +125C

-40 to +125C 3000 P/N Suffix Packing Style Evaluation Board Suffix = S Bulk (loose) Suffix = E T & R Suffix = E or S 100% Tin 2450AT18A100-EBSMA (see page 2&3 for details) e.g. 2450AT18A100S e.g. 2450AT18A100E e.g. 2450AT18A100(E or S) Mechanical Dimensions L W T a In 0.126 0.063 0.008 0.008 mm 3.20 1.60 0.2 0.2 0.051

+.004/-.008 1.30

+0.1/-0.2 0.020 0.012 0.50 0.3 Terminal Configuration No. 1 2 Function FEED NC a T W L Want the layout file? Request it at: www.johansontechnology.com/ask-a-question Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate Camarillo, CA 93012 TEL 805.389.1166 FAX 805.389.1821 Ver. 3.0 2018 Johanson Technology, Inc. All Rights Reserved

"High Frequency Ceramic Solutions"

2.4GHz Mini Antenna, SMT Detail Specification:

7/9/2018 P/N 2450AT18A100 Page 2 of 5 Mounting Considerations 1: Evaluation Board 50 Feed Line

) 13.5mm 6.5mm GND Antenna NO GND 39.5mm 4mm 6.5mm Units in mm Matching Component JTI P/Ns:

L-14C2N7JV4 L-14C2N2JV4 1.0pF 2.6 3.9nH 1.6

2.7nH

) 4.2 1.9 0.4 JTI P/N for Matching Circuit: Cap

(1.0pF): 500R07S1R0BV4T Inductor (2.7nH): L-07C2N7SV6T Inductor (3.9nH): L-07C3N9SV6T To order a pre-tuned 50 EVB with a female SMA connector click here: www.johansontechnology.com/request-a-sample Reference p/n: 2450AT18A100-EBSMA Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate Camarillo, CA 93012 TEL 805.389.1166 FAX 805.389.1821 Ver. 3.0 2018 Johanson Technology, Inc. All Rights Reserved

"High Frequency Ceramic Solutions"

2.4GHz Mini Antenna, SMT Detail Specification:

7/9/2018 P/N 2450AT18A100 Page 3 of 5 Mounting Considerations 1: Typical Electrical Performance (T=25C) Return Loss with matching circuit @ +25C VSWR with matching circuit @ +25C and +125C Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate Camarillo, CA 93012 TEL 805.389.1166 FAX 805.389.1821 Ver. 3.0 2018 Johanson Technology, Inc. All Rights Reserved

"High Frequency Ceramic Solutions"

2.4GHz Mini Antenna, SMT Detail Specification:

7/9/2018 P/N 2450AT18A100 Page 4 of 5 Mounting Considerations 1: Antenna Performance Typical 2D radiation patterns @ 2.44GHz Z (0) YZ cut @2.45GHz Vertical Horizontal YZ-plane Y Z XZ cut @2.45GHz Vertical Horizontal X (0) XZ-plane XY cut @2.45GHz Vertical Horizontal X (0) XY-plane Y Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate Camarillo, CA 93012 TEL 805.389.1166 FAX 805.389.1821 Ver. 3.0 2018 Johanson Technology, Inc. All Rights Reserved

"High Frequency Ceramic Solutions"

2.4GHz Mini Antenna, SMT Detail Specification:

7/9/2018 P/N 2450AT18A100 Page 5 of 5 Antenna tuning, optimization, and validation services:

www.johansontechnology.com/ipc-antenna-services For more antennas and to download measured S-parameters, go to:

www.johansontechnology.com/antennas Soldering Information MSL Info Packaging information www.johansontechnology.com/ipcsoldering-profile www.johansontechnology.com/msl-rating www.johansontechnology.com/tape-reel-packaging For layout review contact our Applications Team at:

www.johansontechnology.com/ask-a-question RoHS Compliance www.johansontechnology.com/rohs-compliance Need help designing the antenna in? Use our antenna design services!

www.johansontechnology.com/ipc-antenna-services We provide 2 free layout reviews and if you need us to tune and characterize the antenna on your product (inside anechoic chamber) we can do that too. Small lab fee may apply for the latter. Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate Camarillo, CA 93012 TEL 805.389.1166 FAX 805.389.1821 Ver. 3.0 2018 Johanson Technology, Inc. All Rights Reserved

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Generac Power Systems Inc. Applicant Declaration Address FRN Grantee Code FCC ID S45 W29290 Hwy. 59 Waukesha, Wisconsin, United States 53189 0021621941 VDE VDE20242021950 Authorized Contact Name Jeffrey Jonas Contact Email Contact Phone Jeffrey.Jonas@generac.com 262-544-4811 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

a) b) c) d) e) f) g) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List

[Generac Power Systems Inc.] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules.

[Generac Power Systems Inc.] (the applicant) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to 1.50002, as an entity producing covered equipment. Applicant Signature:

Date: 04/08/2024 Print Name:

Title:

Jeffrey Jonas Senior Staff Engineer

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database QSF27-14-04 Rev 1.1 Jan 17, 2024 Page 1 of 1 Original Issue: Jan. 4, 2021

Confidentiality Request regarding application for FCC ID: VDE20242021950 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States Generac Power Systems Inc. To:

From: S45 W29290 Hwy. 59 Waukesha, Wisconsin, United States 53189 Regarding:

LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Jeffrey Jonas Generac Power Systems Inc

Generac Power Systems Inc. TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: VDE20242021950 To whom it may concern:

Date: 04/08/2024 We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with <<Generac Power Systems Inc>>. This authorization is valid until further written notice from the applicant. Name (Printed): Jeffrey Jonas Title: Senior Staff Engineer Signature:

On behalf of Company: Generac Power Systems Inc Telephone: 262-544-4811

UNITED STATES DESIGNATED AGENT LETTER Date: 2024-04-15 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant Company Name: Generac Power Systems Inc. FRN:

Grantee Code:

Contact Name:

Address:

City/Province/Zip: Waukesha, Wisconsin, 53189, 0021621941 VDE Jeffrey Jonas S45 W29290 Hwy. 59 U.S. designated agent Company Name: Generac Power Systems Inc. FRN:

Contact Name Address:

City/Province/Zip: Waukesha, Wisconsin, 53189, 0021621941 Jeffrey Jonas S45 W29290 Hwy. 59 United States 262-544-4811 262-544-4851 Jeffrey.Jonas@generac.com United States 262-544-4811 262-544-4851 Jeffrey.Jonas@generac.com Telephone:

Fax:

Email:

Telephone:

Fax:

Email:

ATTN: Director of Certification:

We, Generac Power Systems Inc. understand and acknowledge the applicants consent and the designated agents obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, Generac Power Systems Inc. acknowledge the applicants acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant Name (Printed): Jeffrey Jonas Title: Senior Staff Engineer U.S. designated agent Name (Printed): Jeffrey Jonas Title: Senior Staff Engineer Signature:

Signature: