| all | frequencies |
|
|
exhibits | applications |
|---|---|---|---|---|---|
| manuals | |||||
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 2 3 4 5 6 7 8 |
|
User Manulal | Users Manual | 216.03 KiB | May 11 2018 | |||
| 1 2 3 4 5 6 7 8 |
|
Usesr Manual | Users Manual | 216.05 KiB | ||||
| 1 2 3 4 5 6 7 8 | Test Report | May 11 2018 | ||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | May 11 2018 | ||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | May 11 2018 | ||||||
| 1 2 3 4 5 6 7 8 | Test Setup Photos | May 11 2018 / April 05 2019 | ||||||
| 1 2 3 4 5 6 7 8 | Internal Photos | May 11 2018 / April 05 2019 | ||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | May 11 2018 | ||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | May 11 2018 | ||||||
| 1 2 3 4 5 6 7 8 | External Photos | May 11 2018 / April 05 2019 | ||||||
| 1 2 3 4 5 6 7 8 | ID Label/Location Info | May 11 2018 | ||||||
| 1 2 3 4 5 6 7 8 | RF Exposure Info | May 11 2018 | ||||||
| 1 2 3 4 5 6 7 8 | Test Setup Photos | May 11 2018 / April 05 2019 | ||||||
| 1 2 3 4 5 6 7 8 | Test Report | May 11 2018 | ||||||
| 1 2 3 4 5 6 7 8 | Test Report | May 11 2018 | ||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | May 11 2018 | ||||||
| 1 2 3 4 5 6 7 8 | Test Report | May 11 2018 | ||||||
| 1 2 3 4 5 6 7 8 | Test Report | May 11 2018 | ||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | May 11 2018 | ||||||
| 1 2 3 4 5 6 7 8 | Test Setup Photos | May 11 2018 / April 05 2019 | ||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) | May 11 2018 | ||||||
| 1 2 3 4 5 6 7 8 | Test Report | |||||||
| 1 2 3 4 5 6 7 8 | Test Setup Photos | |||||||
| 1 2 3 4 5 6 7 8 | Test Report | |||||||
| 1 2 3 4 5 6 7 8 | RF Exposure Info | |||||||
| 1 2 3 4 5 6 7 8 | Test Setup Photos | |||||||
| 1 2 3 4 5 6 7 8 | Test Setup Photos | |||||||
| 1 2 3 4 5 6 7 8 | Test Setup Photos | |||||||
| 1 2 3 4 5 6 7 8 | Test Report | |||||||
| 1 2 3 4 5 6 7 8 | ID Label/Location Info | |||||||
| 1 2 3 4 5 6 7 8 | Test Report | |||||||
| 1 2 3 4 5 6 7 8 | Test Report | |||||||
| 1 2 3 4 5 6 7 8 | Cover Letter(s) |
| 1 2 3 4 5 6 7 8 | User Manulal | Users Manual | 216.03 KiB | May 11 2018 |
Contents Safety ................................................................................................................ 3 Environment .................................................................................................... 4 1 Getting Started .............................................................................................. 5 1.1 Getting to know your touch phone................................................... 5 1.2 Installing the SIM card and storage card .......................................... 5 1.3 Charging the Battery ....................................................................... 6 1.4 Starting up the device ...................................................................... 7 1.5 Status Icons ..................................................................................... 9 2 Using phone features .................................................................................. 10 2.1 Turning the phone function on and off ........................................... 10 2.2 Making a call ................................................................................ 10 2.3 Answering and Ending a call ......................................................... 11 2.4 In-call options ............................................................................... 11 2.5 Using call history .......................................................................... 12 2.6 Call settings .................................................................................. 12 3 Setting on your device................................................................................. 12 4 ActiveSync ................................................................................................... 16 5 Contacts....................................................................................................... 18 6 Exchanging Messages ................................................................................. 20 7 Internet ........................................................................................................ 25 7.1 Ways of Connecting to the Internet ................................................ 25 7.2 Browser ......................................................................................... 25 8 Experiencing Multimedia ........................................................................... 27 8.1 Camera & Picture .......................................................................... 27 8.2 Music ............................................................................................ 30 8.3 FM Radio ...................................................................................... 32 9 Other applications ...................................................................................... 32 9.1 Calendar ........................................................................................ 32 1 9.2 Alarm Clock .................................................................................. 33 9.3 Calculator ...................................................................................... 34 2 Safety Never attempt to disassemble your phone. You alone are responsible for how you use your phone and any consequences of its use. As a general rule, always switch off your phone wherever the use of a phone is prohibited. Use of your phone is subject to safety measures designed to protect users and their environment. Do not use your phone in damp areas (bathroom, swimming pool). Protect it from liquids and other moisture. Do not expose your phone to extreme temperatures lower than - 10C and higher than + 55C. The physicochemical processes created by chargers impose temperature limits when charging the battery. Your phone automatically protects the batteries in extreme temperatures. Do not leave your phone within the reach of small children (certain removable parts may be accidentally ingested). Electrical safety: Only use the chargers listed in the manufacturers catalogue. Using any other charger may be dangerous; it would also invalidate your warranty. Line voltage must be exactly the one indicated on the chargers serial plate. Aircraft safety: When traveling by plane, you will need to switch your phone off when so instructed by the cabin crew or the warning signs. Using a mobile phone may be dangerous to the operation of the aircraft and may disrupt the phone network. Its use is illegal and you could be prosecuted or banned from using cellular networks in the future if you do not abide by these regulations. Explosive materials: Please comply with warning signs at petrol station asking you to switch your phone off. You will need to comply with radio equipment usage restrictions in places such as chemical plants, fuel depots and at any location where blasting operations are under way. Electronic equipment: To avoid the risk of demagnetization, do not let electronic devices close to your phone for a long time. Electronic medical equipment: Your phone is a radio transmitter which may interfere with electronic medical equipment or implants, such as hearing aids, pacemakers, insulin pumps, etc. It is recommended that a minimum separation of 15 cm be maintained between the phone and an implant. Your doctor or the 3 manufacturers of such equipment will be able to give you any advice you may need in this area. Hospitals: Always make sure that your phone is switched off in hospitals when so instructed by warning signs or by medical staff. Road safety: Do not use your phone when driving. In order to give your full attention to driving, stop and park safely before making a call. You must comply with any current legislation. Distance of operation: This phone model has been tested and meets radiofrequency exposure guidelines when used as follows:
Against the ear: Place or receive a phone call and hold the phone as you would a wire line telephone. Body worn: When transmitting, place the phone in a carry accessory that contains no metal and positions the phone a minimum of 2.5 cm form your body. Use of other accessories may not ensure compliance with radiofrequency exposure guidelines. If you do not use a body worn accessory and are not holding the phone at the ear, position the phone a minimum of 2.5 cm from your body, Data operation: When using a data feature, position the phone a minimum of 2.5 cm from your body for the whole duration of the data transmission. Environment Packaging: To facilitate the recycling of packaging materials, please obey the sorting rules instituted locally for this type of waste. Batteries: Spent batteries must be deposited at the designated collection points. The product: The crossed-out waste bin mark affixed to the product means that it belongs to the family of electrical and electronic equipment. To promote the recycling and recovery of waste electrical and electronic equipment (WEEE) and at the same time safeguard the environment, European regulations require you to obey the sorting rules instituted locally for this type of waste. 4 1 Getting Started 1.1 Getting to know your touch phone 1.2 Installing the SIM card and storage card You need to remove the back cover before you can install the SIM card and storage card. Also, you can remove and install the SIM card and storage card when the phone is turning on. To remove the back cover 1. Make sure your device is turned off. 2. Firmly hold the device with both hands and the front panel facing down. 3. Push the back cover up with your thumbs until it disengages from the device and then slide it up to remove. To install the SIM card The SIM card contains your phone number, service details, and phone book/
message memory. Your device is supported 2G, 3G (TD_SCDMA/WCDMA) or 4G (TD_LTE/FDD_LTE) SIM cards. 1. Remove the back cover if it is installed. 2. Locate the SIM card slot, and then insert the SIM card with its gold contacts facing down and its cut-off corner facing out the card slot. 3. Slide the SIM card completely into the slot. Note: The phone can be supported the double SIM cards. The card slot will be supported 3G
(TD_SCDMA/WCDMA) or 4G SIM card
(TD_LTE/FDD_LTE), but one SIM card can use 4G networks only. If you need to use 4G operation, please insert 4G card in the card slot
(network type is default 4G, defined in the menu Settings/More/Cellular networks/Preferred network type), If insert 3G or 2G card in the card slot, you can also use 3G or 2G operation only. Some legacy SIM cards may not function with your device. You should consult with your service provider for a replacement SIM card. There may be fees for this service. To install a memory card To have additional storage for your images, videos, music, and files, you can 5 purchase a memory card and install it into your device. 1. Make sure that your device is turned off, and then remove the back cover. 2. Locate the memory card slot on the upper part of the exposed right panel. 3. Insert the memory card into the slot with its gold contacts facing down until it clicks into place. Note: To remove the memory card, press it to eject it from the slot. 1.3 Charging the Battery Your device comes with a rechargeable Lithium-ion battery and is designed to use only manufacturer-specified original batteries and accessories. Battery performance depends on many factors, including network configuration, signal strength, and usage patterns. Warning: To reduce risk of fire or burns:
Do not attempt to open, disassemble, or service the battery pack. Do not crush, puncture, short external contacts, or dispose of in fire or water. Do not expose to temperatures above 60C (140F). Replace only with the battery pack designated for this product. Recycle or dispose of used battery as stipulated by local regulations. New batteries are shipped partially charged. Before you start using your device, it is recommended that you install and charge the battery. Some batteries perform best after several full charge/discharge cycles. Note: Only the AC adapter and USB sync cable provided with your device must be used to charge the device. Connect the USB connector of the AC adapter to the sync connector on your device, and then plug in the AC adapter to an electrical outlet to start charging the battery. As the battery is being charged while the device is on, a charging icon appears in the title bar of the Home screen. After the battery has been fully charged, a full battery icon appears in the title bar of the Home screen. Warning: Do not remove the battery from the device while you are charging it using the AC or car adapter. As a safety precaution, the battery stops charging before it overheats. 6 1.4 Starting up the device Power on/off To power off your phone, press & hold POWER. On release, the Phone options menu opens. Select Power off and confirm. To power on again, press & hold POWER. Silent mode To silence your phone quickly, press & hold the volume button to zero volume. Or on the Home screen. Screen sleep After a period of inactivity, your screen will go to sleep (display will turn black). In sleep, your phone uses less battery power. You can control this behavior:
Set screen timeout period 1. On the Home screen, touch and select Settings. 2. Select Display > Sleep. Select a time from the menu. Prevent sleep while charging 1. On the Home screen, then touch and select Settings. 2. Select Developer options > Stay awake check box. Lock screen & put phone to sleep Except when on a phone call, from any screen, press POWER (immediately). While not on a call, to lock your control buttons and screen from accidental touch activation, press POWER. You can increase the security of your phone by setting Screen lock pattern. Once set, in order to unlock your screen, youll have to draw the correct unlock pattern. You can set your screen unlock pattern as follows:
1. On the Home screen, touch and select Settings. 2. Select Security and then scroll down to Screen lock pattern. 3. Set or change your unlock pattern by selecting Screen lock pattern, as applicable. 4. Follow the prompts to define your pattern. Note: You must slide your finger along the screen to create the pattern, not select individual dots. Connect at least four dots. 7 If you want your pattern to be hidden as you draw it, clear Make pattern visible check box. Home screen The Home screen is your starting point for using all the applications on your phone. You can customize your Home screen to display applications, shortcuts, and widgets as you like. 1. The Home screen actually extends beyond the screen width. On Home screen, slide your fingertip left and right along the screen to reveal the full width of the Home screen. This additional space gives you more room to customize Home with applications, shortcuts, and widgets. 2. Create Home screen shortcuts and widgets:
On Home screen, hold the blank screen to select WIDGETS. Touch and hold to pick up an Application shortcut, a Shortcut to some of your saved information (such as a play list), a Widget (a clock or picture frame) for your Home screen. You can place the widget slide your fingertip right along the screen to reveal the width of the Home screen. The application, shortcut, folder, or widget appears on Home screen. 3. To create an application shortcut quickly, touch the application tab to reveal all the application icons, then touch & hold an application icon. Its shortcut is added to the Home screen. 4. To remove a shortcut or widget from your Home screen, touch & hold the item to enter Remove mode. Drag the item to Remove button and release. Youll know when your item is in Remove because the item and the tab will turn gray. 5. Move objects on the Home screen To move an icon or other item on the Home screen, you must first touch &
hold it to enter Remove. The object will magnify when its ready to be moved. Without lifting your finger (or youll drop out of remove mode), drag the object to the new position. To move an item to a section of the Home screen not in view, move it to the edge of the screen and hold it there for a moment. The screen view will shift; position the object and release. 8 1.5 Status Icons Connection status icons Along the top of your phone screen is the status bar. On the left side, icons will appear, notifying you of a new message, upcoming calendar event, or something else you should notice. On the right side of the status bar, youll see connection status icons. Network signal E:GSM 3G:TD_SCDMA, WCDMA 4G:TD_LTE, FDD_LTE Call forward Missed call SMS/MMS Alarm is set Sign-in/sync error Song is playing WLAN service connected Call in progress Wireless services are off (Airplane mode) Phone on mute Ringer is off Bluetooth is on Connected the earphone Battery is low Battery is charging Read your notifications When you see a notification in the status bar, touch the bar and slide your finger down the screen to open the list of notifications displayed in the sliding window. Ongoing notifications report activities such as call forwarding ON, current call status, song playing. Notifications report the arrival of new messages, calendar events, and alarms. You can clear notifications list by selecting CLEAR ALL notifications at the 9 bottom of the notifications window. To open the message, reminder, or other notification, you can touch the items. To close the notifications window, slide your finger up the screen. Notes: On the home screen, touch the bar and slide your finger down the screen to open the list of notifications displayed in the sliding window, you can touch the icon on the top of the screen to enter the shortcuts screen, such as Airplane mode, Wi-Fi, Bluetooth, Data connection, Airplane mode, you can open or close the selected function directly. 2 Using phone features 2.1 Turning the phone function on and off To enable or disable Airplane Mode In many countries, you are required by law to turn off the phone while on board an aircraft. Another way to turn off the phone function is to switch your device to Airplane Mode. When you enable Airplane Mode, all wireless radios on your device are turned off, including the phone function, Bluetooth, and WLAN. 1. Touch
> Settings > More > Airplane mode. 2. Touch Airplane mode to enable or disable. When you disable Airplane mode, the phone function is turned back on and the previous state of Bluetooth and WLAN are restored. Adjusting the volume Press Volume button on the side of the phone to show the volume screen. If the phone is in vibrating mode, the voice will be muted automatically and the device will vibrate when there is an incoming call. 2.2 Making a call On Home screen, you can touch
> Phone to enter the dial screen. 1. Touch the on-screen dial pad to enter a number, touch Delete button to delete numbers youve entered. Touch & hold to delete all the numbers in the 10 field. To dial a call, touch Call button (Green icon) to make a call. To end a call, touch End button (Red icon). 2. On the dial screen, touch Call history tab to show the call records, select an entry listed in the log to call the number. 3. Also, enter Contacts tab that the contacts with phone numbers are listed. Select a contact, and then select the phone number to dial the call. 2.3 Answering and Ending a call When you receive a phone call, the incoming voice call screen will appear, allowing you to either answer or ignore the call. 1. To answer an incoming call, slide ANSWER (Blue icon) button rightward. 2. To reject a call, slide REJECT button (Red icon) button leftward. 2.4 In-call options While on a call, reveal the in-call options: Speaker, Mute, Hold, End. Note that if Bluetooth services are on and you are connected to a hands-free device, the more menu indicator will show Bluetooth on. 1. Speaker: To use the speaker, select Speaker so it shows a black bar. To turn it off, select it again so the bar is unfilled. The status bar will display the icon when the speaker is on. 2. Mute: To mute your side of the conversation, select Mute so it shows a black bar. To turn it off, select it again so the bar is unfilled. The status bar will display the icon when Mute is on. 3. Hold: To put an active call on hold, select Hold so it shows a green bar. To resume the call, or take the call off hold, select it again so the bar is unfilled. If you take a call while already on a call, the first call will be placed on hold automatically. The status bar will display this icon when a call is on hold. 4. Add call: If you need to enter numbers while on a call, touch Add call. 5. Incoming call: During call in progress, if you are on a call (call in progress) when another call comes in (incoming call), you have a few choices:
Answer the incoming call and place the call in progress on hold. To switch calls at any time, touch Swap calls. 11 If you dont want to interrupt your call in progress, then touch END. If you have one call in progress and one caller on hold, to end both calls, touch End all. 6. While on a call, you can conference up to six callers, counting yourself. Note that you can also have an additional caller on hold during a conference call, regardless of how many participants are on the conference. Note: Whether the group call function can be used depends on whether the network operator supports and provides such function as well as whether you have applied for such function. Please contact network operator for details. 2.5 Using call history 1. The missed call icon appears in the title bar when you missed a call. 2. Use Call history tab to check who the caller was, or view all your dialed numbers, and received calls. To open Call history tab, touch Call history button in the phone screen to enter the call history list. 3. Scroll to select the contact or number you want to dial, touch Call button. 4. Tap and hold the selected contact you want to call, and then you can make to do the following options of call, send message or add to a contact on the shortcut menu. 2.6 Call settings On the dialing screen, press MENU > Settings to enter Call settings menu, you can make the operation of call settings and general settings. 3 Setting on your device Control phone-wide settings from the Home settings screen: touch and select Settings. 3.1 Wireless & networks Wi -Fi 1. Select this check box if you prefer to use Wi-Fi for your data connection. 2. Wi-Fi settings: Open the Wi-Fi settings screen; select it from the network list. Provide your user name or password if required. 12 Bluetooth 1. Use this check box to turn Bluetooth services on or off. 2. With Bluetooth services on, you can touch MENU to open the Bluetooth settings screen. SIM cards You can select to set the information of the SIM card, and activate or deactivate data connection. More Airplane mode on/off: When airplane mode is selected, all wireless connectivity is off. This icon selected. will display in the status bar when airplane mode is Callular network: Select data roaming capability. Select a wireless operator network - Scan for all available networks, or select a network automatically. Add or edit network Access Point Names (APNs) - Do not change this setting unless advised to do so by your wireless operator!
3.2 Device Display Brightness level: Select to open the brightness control, and then slide your finger along the brightness bar to set the level. In sunlight, increase the level. Sleep: Select to decide how long your phone must be inactive before the screen turns off. Sound & notification Select one user profile that you want and enter the following options:
Volumes: Select to open the volume control, and then slide your finger along the volume bar to set an incoming call ring volume or alarm, playing back music, videos. Phone ringtones: Select to decide on a ring tone to use for incoming calls. Note that you can override this setting for individual contacts in the Edit contact details screens. Default notification sound: Select a ring tone to use for a notification (e.g., new message). Note that you can override this setting for new Calendar event 13 notifications, text and multimedia message notifications. Go to the applications settings screens to select specific ring tones. Vibrate: Select to have your phone vibrate for incoming calls. Dial pad touch tones: Select to have a tone sound when you use the on-screen Dialer. Touch sounds: Select to have a sound play when you select an item on the screen either using touch. Apps View all the applications stored on your phone and how much space they occupy. If youve downloaded an application from Android Market, you can uninstall it from this screen. Select a specific application to:
1. Clear your user data (if you have any associated with a particular application). 2. Disassociate the application with any actions. 3. Uninstall - If youve downloaded an application from Android Market, you will be able to uninstall it from this screen by selecting Uninstall. Storage View and manage the data storage on your phone. 3.3 Personal Location Select a source for determining your location. Security Screen unlock pattern: Create a pattern you will be asked to draw before your screen will unlock. You can select to make the pattern visible or invisible as you draw it. SIM card lock settings: Lock your SIM card for extra security. You can also change your SIM card PIN from this screen. If you dont know your SIM PIN, you can obtain it from your wireless operator. Visible passwords: Select to have your password display as you type it. Unknown sources: Select this check box if you want the ability to download applications from the Web. With this check box not selected, you will only be able to download applications from Android Market. To ensure your personal 14 data and phone remain secure; it is recommended you not select this check box. Accounts Turn on/off synchronization for all services. Backup & reset You can select to reset your phone to factory settings. This will erase all your data from the phone and require you to sign in and go through the setup screens to use any of the applications. 3.4 System Date & time Set time, time zone, and date: Use Automatic unless you need to override the network values. Time format: Select from 12 or 24 hour formats. Date format: Select from a variety of formats. Developer options If you are an application developer, you may be interested in these settings:
USB debugging: If you want be able to communicate with your phone directly via USB, select USB debugging check box. Stay awake: To prevent your phone from sleeping while charging (via power adapter or USB), select Stay awake check box. About phone View your phone Status: This screen lists a variety of information, including your phone number, the network you are currently using, the type of network, signal strength, whether you are roaming or not, any WLAN addresses youre connected to, and more. View the model number and version information for your phone. 15 4 ActiveSync 4.1 Data synchronization Some applications on your phone (Contacts and so on) give you access to the same personal information that you can add, view, and edit on your computer using Web applications. This means that when you add, change, or delete your information in any of these applications on the Web, the updated information also appears on your phone, and vice verse. Also, if you lose your phone or if your phone is destroyed, your personal information is not lost and will appear, as before, on a replacement phone. This mirroring of information happens through over-the-air data synchronization, or data syncing. Data syncing occurs in the background and shouldnt ever get in your way. Youll know your data is being synchronized when you see this icon in the status bar:
Because sending large amounts of data back and forth over the air can take time and require considerable bandwidth, there are some settings on the phone that allow you to control data sync. Sync by application To control synchronization Contacts, you can do the following:
1. On the Home screen, then touch and select Settings. 2. Select Accounts. When any of the applications are synchronizing, you will see the sync icon
. You will also see the last time your data was synchronized. 3. By default, the personal information in Contacts will sync whenever you make a change or receive a new message. You can change this behavior:
Auto-sync: When selected, Auto-sync will sync Contacts automatically, as you make changes or receive new messages. When OFF, information will not be synced automatically, although you can force sync by using the individual application check boxes described below. 4. Sync problems:
If you see this icon to the left of the sync check box, then there was a temporary problem with the data synchronization. Check your data connection 16 and try again later. 4.2 Bluetooth You can use Bluetooth to send and receive calls using a headset or hands-free car kit. Turn on Bluetooth services 1. On the Home screen, then touch and select Settings. 2. Select Bluetooth, and then select Bluetooth check box to turn on Bluetooth services. When on, the Bluetooth icon appears in the status bar. 3. The other Bluetooth devices will see your phone in their scans for Bluetooth devices. Name your Bluetooth device 1. Make sure you have turned Bluetooth on. 2. Select Settings > Bluetooth > Bluetooth settings (touch MENU)> Rename this device. 3. Type the name for your device in the dialog box, and then select OK. 4. Your new device name appears on the Bluetooth settings screen. Pair & connect with Bluetooth devices Before your phone can communicate with a Bluetooth headset or hands-free car kit, the devices must pair, then connect:
1. Make sure you have turned Bluetooth on. 2. Your phone starts scanning for Bluetooth devices within range. As they are found, the devices appear in the list of Bluetooth devices. 3. To pair with a device in the list, select it. 4. Type the devices PIN and then Pair. 5. Once paired, select the device name to connect. 6. Pairing and connection status appear under the device name. 7. Once the other Bluetooth device shows connected status, you can start using it to make and receive phone calls. 8. To un-pair with a device, touch the icon on the side of device to open the context menu. Select Un-pair, as appropriate. If you select Un-pair when connected, you will be disconnected as well. Notes: The phone supports only the headset and hands-free Bluetooth profiles, 17 so if you try to connect to a device that is not a headset or hands-free car kit, then you will receive an unable to connect message. If you pair with a second headset while connected to the first, the first headset will remain connected. To switch connection to the second headset you must manually select that headset again after pairing. Rescan for Bluetooth devices If you want to update the list of Bluetooth devices, select Refresh. 5 Contacts The contacts on your phone are synced with your account contacts stored on the Web. To view the contacts on your phone, touch and select Contacts. Contacts belonging to a specific group (you can choose which group) are listed in the Contacts tab. Only those contacts you star as favorites are listed in the Favorites tab. Browse through your contacts by sliding your fingertip up and down on the screen. Another way to find a contact quickly is to use SEARCH button, input the first letter of the name youre looking for and touch search icon, the matching contacts are appeared on the screen. From the Contacts tab, you can:
1. Go to Contact details: Select the contacts name to open the Contact details screen, where all screen the information youve saved for this contact is displayed. 2. Take action on a contact: On the Contact details screen, you can view call the contacts number, send a text message, add or remove a star or edit the contact details. 3. On the Contact details screen, press MENU to open the context menu. From the menu you can select to share, place on home screen, or delete the contact. Add a contact 1. On the Home screen, then touch and select Contacts. Your contact list appears. 2. Touch the + icon on the right-down of the screen to add new contact. 18 3. Add all the information you want to store for this contact in the appropriate fields. You must add some information to save a contact. To change a default label, select the label name to open the label menu. Select a different label or create a custom label. To add more fields, select More fields. 4. You can assign a Caller ID icon to your contact by touching Caller ID icon. The Pictures application opens. Navigate to a picture and select it, size the cropper with your fingertips. When finished, select Done. The picture is associated with your contact. If you do not assign an icon, a default android icon will be assigned. 5. To save your contact, press BACK, or touch Done icon. Edit contact details You can always make changes to the information youve stored for a contact:
1 From Contacts, touch the contact you want to open the Contact details screen. 2. Select Edit icon. The Edit contact screen appears. 3. Make your edits, then press Done icon. Communicate with a contact From Contacts you can quickly call or text a contacts default number, as displayed below their name on the screen. However, to view all the information youve stored for a contact, and to initiate other types of communication with that contact, open the Contact details screen. To open a contacts details screen, simply select their name from Contacts. 1. Call a contact: From the contact list, touch the contact you want to open the Contact details screen. Touch the call number directly to dial that contacts primary number (first in the list on their details screen). 2. To dial a different number for the contact, select the contacts name, and then select the number on their details screen and then touch the call number that you want. 3. Send a text or multimedia: To send a text or multimedia message to a contact, you must have a message to a contact mobile number stored for them in contact details. From the Contact details screen, select a phone number and click Message icon, A Compose screen opens for your new message. Complete your message and select Send. 19 4. Send email to a contact: To send an email message to a contact, you must have an email address stored for them in their contact details. Select the contact you want to email. Their Contact details screen opens. In the Send email section, select the email address. If you are fetching POP3 or IMAP email accounts to your phone, then select the account you wish to use to send. A Compose screen opens for your new message. Complete your message, select Send. SIM contacts importer If you have stored names and phone numbers on your SIM card, you can add these to the Contacts stored on your phone by selecting this settings option. From the contact list, press MENU to select Import/export, you can select to import from SIM card or memory card, once the list of names and numbers appears you can:
Import only certain names/numbers in the list - Select the name/number you want to import, then repeat for others as you wish. (As soon as you select the name/number, it is imported) 6 Exchanging Messages 6.1 SMS and MMS messaging To open the SMS & MMS Messaging application, on the Home screen, then touch and select Messaging icon. About text and multimedia messages SMS messages are also know as text messages and can each be around 160 characters. If you continue to type after the limit is reached, your message will be delivered as one, but count as more than one message. These are called concatenated messages. MMS messages are also known as multimedia or picture messages and can contain text, picture, audio, and video files. When you compose a message, the phone will automatically convert a text message into a multimedia message as soon as you add a subject or an attachment, or if you address the message using an email address rather than a 20 phone number. View the message from the message list Select a message thread in the list to open it for reading. When open, the individual messages appear stacked on the screen, much like with instant messaging conversations (or chats). Note that messages you send are also listed in the Read view. 1. Reading multimedia messages If you have selected to auto-retrieve your multimedia messages, then both the message header and body will download. If you are downloading only the headers, then you must first select the Download button to retrieve the message body. If you are concerned about the size of your data downloads, you can check the message size before you download. Once the message has downloaded, select Play button to view the message. From a message read view, you can do the following:
1. To view details about a particular message, in the Read view, touch & hold the message to open the context menu. Select View details. 2. Reply to a message: Simply start typing your message in the text box at the bottom of the screen to reply to a message. You can always press MENU and select to add a subject or an attachment to convert it to a multimedia message. Select Send when ready. 3. Links in messages: If a message contains a link to a Web page, it will be selectable. To view the Web page in the Browser, simply select it. 4. Delete messages: Your messages will be saved until you explicitly delete them. Delete one message in a thread - With the message thread open in Read view, touch & hold the individual message you want to delete to open the context menu, and then select Delete. Delete all messages in a thread - From the message list, you can also delete an entire thread from the message list by pressing & holding the thread, then touch Delete icon on the bottom of the screen. Delete all message threads - From the message list, press MENU and select 21 Delete all threads. Compose text and multimedia messages 1. Touch + Compose icon. The Compose screen opens. 2. Add recipients by typing a name, phone number, or email address in the Type name or number field. Matching contacts will appear. Select the recipient or continue typing. Add as many recipients as you wish. If you send the message to an email address, the message will automatically convert from a text to a multimedia message. 3. To add a subject, press MENU and select Add subject. If you add a subject, the message will convert to a multimedia message. 4. To add an attachment, touch + icon. Adding an attachment will always convert the message to a multimedia message. Select from audio or picture files. You can select to take a new picture if you want, or record an audio file. Any recordings you make will be stored automatically in Music application in a play list named My recordings. To remove an attachment, select the attachments Remove button. 5. Type your message. As you type, youll be able to track how many characters/messages youre creating. Remember that text messages have a limit around 160 characters. Once you go over that limit, a new message is actually created but automatically joined into one when received. 6. Select Send when ready. You can also save a draft. 7. As your message sends, progress displays in the title bar. If you see this icon to the right of the message, it means your message is still being delivered. Save message as draft While composing, press BACK, your message automatically saves as a draft. Text and multimedia message settings To set text and multimedia message preferences, from the message list, press MENU and select Settings. 6.2 POP3 and IMAP email accounts Add an email account You can fetch messages from up to five POP3 or IMAP accounts. Follow these steps:
22 1. On the Home screen, then touch and select Email application. 2. The Set up new account screen appears. 3. Type your account email address and password. 4. If you want, select the Send email from this account by default check box. This setting only applies if you have more than one POP3 or IMAP account set up. 5. Select Next. If you have a popular email account, the application will set everything up for you! Before you go to your Inbox, you can name the account (if you dont, your email address will be used). You are also asked to type your name as you want it to display on outgoing messages. You must complete this field before you can select Next and go to your Inbox. For less popular accounts, follow the prompts to type the email server, protocol, and other account information yourself. After your account settings have been verified, select Next to go to your Inbox. 6. To add more accounts (up to five), from an Inbox or your Accounts screen, press MENU and select Add account. Use your POP3 and IMAP email account Once youve set up an account, you can do the following:
1. Refresh Inbox: From the Inbox, press MENU and then select Refresh to update your Inbox with any previously-unfetched email. 2. Read email: You can display or collapse the messages in your Inbox by selecting Inbox. Unread messages display with a colored band. (Each account you add will use a different color.) 3. Forward, Reply, Reply all: You can forward, reply, or reply all to an email message from the Inbox. From the Inbox, touch & hold the message to open its context menu. Select the action you want to take. 4. Compose new From the Inbox: 1. Press MENU and select Compose. 2. Add recipients by typing a name or address in the To field. Matching contacts will appear. Select the recipient or continue typing the address. Add as many as you wish. 3. Type a subject and message. 4. Select Send, Save as draft, or Discard. Pressing 23 BACK will also save as draft unless you have not typed anything. 5. Delete message From the Inbox: 1. Expand the Inbox to display the messages. 2. Touch & hold the message you want to delete. 3. Select Delete. 4. Your message is moved to the Trash. 6. Empty Trash: Once youve moved a message to the Trash, to empty messages in the Trash you must delete each message individually. Press MENU and select Folders to enter the Trash. Note that the message is only deleted from your phone, not from the account server. 7. Remove an email account: You can always remove a POP3 or IMAP email account from your phone. Go to your Inbox, press MENU and select Accounts. Your Accounts screen opens. Touch & hold the account you want to remove to open the context menu. Select Remove account. You will be asked to confirm before the account is removed. Edit account settings To open your Account settings screen, do the following:
1. From your account Inbox, press MENU and select Account settings. 2. The Account settings screen appears. You can do the following from this screen:
Account name: Select to change the name of your account as it appears on your Accounts screen. Your name: Select to change your name as it appears in outgoing email. Email check frequency: Select this pop-up menu to set how frequently your email account is checked for new messages. Note that whenever you open a folder, email is refreshed, regardless of this setting. Default account: If you have more than one POP3 or IMAP email account set up on your phone and want to use this account by default when selecting Compose from the Accounts screen, select this check box. Email notifications: If you want an icon to appear in the status bar when a new message arrives, select this check box. Incoming server settings: Select Incoming settings if you need to edit the 24 username/ password, server, port, or option to delete email from server. Outgoing server settings: Select Outgoing settings if you need to edit the SMTP server, port, security type, option to require sign-in, or username/password. Add another POP3 or IMAP To add another account (you can add up to five), go to your Inbox, press MENU and select Accounts. Your Accounts screen opens. Press MENU and select Add account another account. 7 Internet 7.1 Ways of Connecting to the Internet Your devices networking capabilities allow you to access the Internet or your corporate network through WLAN, GPRS, TD-SCDMA/WCDMA or FDD_LTE/TD_LTE (if SIM card supported). You can also add and set up a VPN or proxy connection. WLAN WLAN provides wireless Internet access over distances of up to 100 meters
(300 feet). To use WLAN on your device, you need access to a wireless access point or hotspot. Note: The availability and range of your devices WLAN signal depends on the number, infrastructure, and other objects through which the signal passes. 7.2 Browser To open the Browser, touch and select Browser icon. The Browser always opens to the last Web page you were viewing. The first time you enter the Browser after powering on, your home page will display. You can change your home page by pressing MENU > Settings >General > Set homepage. The Browse screen From the Browse screen you can do the following:
1. Go to a Web page: Make sure the focus is not on a text box and then start typing the URL. 2. Add a bookmark: Bookmark the Web page you are currently viewing:
Press MENU and select Save to bookmarks. 25 Confirm the URL and name, and then select OK. To view all your bookmarks, press MENU and select Bookmarks. 3. Refresh a Web page: To refresh the contents of the current page, press MENU and select Refresh. Open pages in separate windows You can keep more than one Web page open by using multiple windows to display the pages. You can open up to eight windows. Open a new window: From a Web page, press MENU and select Windows. The Current windows screen opens, showing the Web page you started from, plus a new window. Select New window. Your home page opens in a new window. To return to one of the other windows, press MENU and select Windows. Select the page you want to view. Manage bookmarks You can store as many bookmarks as you want on your phone. Press MENU and select Bookmarks. The Bookmarks screen opens. 1. Bookmark any page: Select Add. Type a name and location (URL) in the dialog box. Select OK. 2. Send bookmarked pages URL: Touch & hold the bookmark you want to open. The context menu opens. Select Share link. An email Compose screen opens with the URL as the message. Address your message and finish composing and select Send. 3. View bookmarked page: Touch & hold the bookmark you want to open. The context menu opens. Select View page or Open in new window. 4. Edit bookmark: Touch & hold the bookmark you want to e open. The context menu opens. Select Edit bookmark. The edit bookmark dialog box opens. Type your change and select OK. 5. Delete a bookmark: Touch & hold the bookmark you want to open. The context menu opens. Select Delete bookmark. You will be asked to confirm. 6. Bookmark current page: Go to a Web page you want to bookmark. Press MENU and select Bookmarks. The Bookmarks screen opens. Press MENU and select Bookmark last-viewed page. The Bookmark link dialog box opens. Confirm or edit the information, then select OK. 26 Set your home page You set your home page from the Settings screen:
1. Press MENU and select More > Settings. The Settings screen opens. 2. In the Page content section, select Set home page to open the dialog box. 3. Type the URL of the page you want to set as home, and then select OK. Download Web files and applications Before you download any files or applications using the Browser, note the following:
1. Before you can download Web applications, you must explicitly allow downloading from the Home > Settings screen:
On the Home screen, then press and select Settings. Select Security, then select Unknown sources check box. 2. All items downloaded form the Web are stored on your memory card, so be sure you have a card installed in your phone before you download from the Browser. 3. The Browser will only allow you to download items that are supported by an application installed on the phone. Warning! Applications downloaded from the Web can be from unknown sources. To protect your phone and personal data, only download applications from sources you trust, such as Android Market. 8 Experiencing Multimedia 8.1 Camera & Picture All the pictures you can capture or view on your phone are stored on memory card, which must be installed in your phone. Before you can use the Camera or view pictures in Pictures, make sure you have a card installed. Load pictures onto your memory card Read the instructions below to add pictures to your Memory card or the phone storage. 1. Mount your memory card to your computer by doing one of the following:
Remove the memory card and insert it into a card reader attached to your 27 computer. 2. On your computer, find the mounted USB drive and open it. 3. Create a folder at the top-level called Pictures or some other descriptive name and open it. 4. Copy .jpg or other image files into this folder. To organize pictures into albums that will display in the Pictures application, create a folder and copy pictures there for each album you want to display. 5. When finished, close the USB drive window and eject the drive as required by your computer's operating system. Take a picture Captured pictures are saved to the DCIM folder on your memory card or the phone. Before you take a picture, wipe the sensor window (on the back cover) to remove any small amounts of oil. 1. To open the Camera, on the Home screen, touch and select Camera icon. 2. The Camera opens in capture mode. Frame your picture within the screen and hold the phone steady. Touch Camera button to capture. Continue to hold the camera steady for a second after you hear the shutter sound. 3. If you select to save, set as, or share, your picture is saved to Gallery application. View your pictures To view the pictures youve captured, as well as any youve stored on your memory card or the phone storage, go to Gallery application:
1. To open Pictures, on the Home screen, touch and select Gallery icon. 2. Depending on how many pictures youve stored, they may take a few minutes to load. 3. If youve stored your pictures in folders on your Memory card, then the folders will display as separate albums. The top left album always contains all the pictures in all the albums. 4. The individual pictures display in a grid in thumbnail format. You can select to display smaller or large thumbnails in Settings. 5. To open a picture in full-screen view, touch the picture. Once in full-screen, 28 select the arrows to scroll through the pictures within that album. If the arrows disappear, touch the picture again to reveal the arrows and zoom controls. Picture options You can do the following while in Pictures. Note: In all the instructions below, you can touch & hold a picture to open the context menu to access all actions, rather than open the picture in full-screen view. 1. View full-screen: Select a picture to open it in full-screen view. 2. Share a picture: In full-screen view, press MENU and select Share. Select to share your picture via Messaging (MMS), or another application (if you have another application installed on your phone that supports sharing). 3. Set as wallpaper: In full-screen view, press MENU and select Set picture as. From the menu that opens select Wallpaper. Touch & hold an edge of the cropper to reveal the sizing arrows, then drag the edge in or out to size. Touch &
drag the center of the cropper to move it within the picture. When youre happy with the cropped area, select Save. 4. Set as contact picture: In full-screen view, press MENU and select Set picture as. From the menu that opens, select Contact icon. Your contact list opens. Select the contact you want to associate with the picture. Touch & hold an edge of the cropper to reveal the sizing arrows, then drag the edge in or out to size. Touch & drag the center of the cropper to move it within the picture. When youre happy with the cropped area, select Save. The picture will now appear in the Contact details screen, as well as on any incoming call notifications. 7. Crop picture: In full-screen view, press MENU and select Crop. Touch &
hold an edge of the cropper to reveal the sizing arrows, then drag the edge in or out to size. Touch & drag the center of the cropper to move it within the picture. 3 When you are happy with the cropped area, select Save. Select Discard to cancel the crop. The cropped picture is saved to Pictures as a copy. Your original is not touched. 8. Rotate picture: In full-screen view, press MENU and select Rotate. Select from Rotate left (counter-clockwise) or Rotate right (clockwise). Your picture rotates and is saved automatically. 29 9. Delete picture: In full-screen view, press MENU and select Delete. The picture will be removed from the Memory card after you confirm. 10. View picture details: In full-screen view, press MENU and select Details. The picture details window opens. You can see the title, resolution, file size, and date of the picture. 8.2 Music To open your music Library, on the Home screen, touch Music icon. Your music is organized into four categories: Artists, Albums, Songs, and Play lists. Select a category to view the lists within each. Once in a category, keep selecting until you reach the music you want to play. For example, if you select the Artists category, you will see a list of artists in A-Z order. If you select an artist, the list opens to display that artists albums. Select an album, and the albums song list displays. Load music onto your Memory card All the music you can listen to on your phone is stored on memory card. Read the instructions below to add music to your memory card. 1. Mount your memory card to your computer by doing one of the following:
Remove the memory card and insert it into a card reader attached to your computer; or, attach your phone to your computer using a USB cable that came in the box. If you use this method, make sure the Home > Settings > Storage >
SD card is selected. 2. On your computer, find the mounted USB drive and open it. 3. Although your phone will find all music files on your memory card, its advisable to keep the number of files or folders at the root level to a minimum. So, if you wish, create a folder at the top-level called music (or whatever you want) to store your files. 4. Open this folder and copy music files into it. If you want, create folders within music to organize your music further. If you want to use certain music files as phone, notification, or alarm ring tones. Note: If you do not want a ringtone to appear in your music Library but you do want it to be available as a ringtone, and then create the ringtones, notifications, or alarms folder outside your music folder. 30 5. When finished copying, close the USB drive window and un-mount or eject the drive as required by your computer's operating system. Remove the USB cable from your phone and computer. Play back music At any level in your Library, touch & hold a listing (a song, artist, album, or playlist) to open the context menu. Select Play to begin play and go to the Playback screen. You can do the following using the Playback screen:
1. Shuffle songs: Shuffle plays songs in random order. Touch to toggle shuffle on and off. When the con is grey, shuffle is off. 2. Repeat mode: Touch to step through repeat modes: repeat all songs, repeat current song, dont repeat (grey icon). 3. Go to any point in song: Slide fingertip in progress bar to desired point in a song. 4. Playback control: from left to right icons: Go to beginning song, Pause/
resume play and Go to next of song. If a song is playing while you are on the Library screen, you can switch to the Playback screen quickly by selecting the lower song bar. Playlists You can create as many playlists as you wish. Note that the Recently added playlist is a system playlist and cannot be deleted or renamed. Also, if you make any voice recordings as part of a MMS message, they will be stored automatically in a playlist called My recordings. Create a playlist on your phone 1. From the Library, select a category. From the list that appears, navigate to the artist, album, or song that you want on a playlist. 2. Touch & hold the artist, album, or song to open the context menu. 3. Select Add to playlist. 4. In the Add to playlist menu that opens, select New to create a new playlist, or one of the existing playlists. 5. The song(s) are added. Manage your playlists Go to the Library screen and select Playlists. All your playlists appear. 31 Touch & hold the playlist to open the context menu. You can do the following from this screen: Play, Edit (rearrange songs), Delete and Rename. Create ringtones from songs You can set any of your songs as a phone ringtone:
1. From the Library, navigate to a song you want to use as a phone ringtone. 2. Touch & hold the song in the list to open the context menu. 3. Select Use as phone ringtone. The ringtone is set as your default incoming call ringtone. 4. Now, when you go to Home > Settings > Audio profiles, and select a phone ringtone, your song will be listed as an option. Delete music from memory card All the music you play on your phone is stored on the inserted memory card. From your phone, you can delete music stored on the card:
1. From the Library screen, select the Artists, Albums, or Songs category. 2. Go to the screen that shows the artist, album, or song that you want to delete. 3. Touch & hold the item to open the context menu. 4. Select Delete. You will be asked to confirm that you want to delete the item from your memory card. 8.3 FM Radio This device provides radio function. Note: Within doors or shielded environment, the receiving effect of radio may be affected. You can improve the effect in the following ways: Near window, adjust the position of earphone cable or adopt manual adjustment. 9 Other applications 9.1 Calendar Calendar views You can view multiple calendars on your phone, so each calendar event is coded with a color. You can view your calendar in a variety of ways. Touch the date on the left-top of the screen to select from Day, Week, Month or Agenda. Create an event 32 From any of the views, press MENU and select New event to open the new Event details screen. Type the information in the fields. Select date & time. Name that appears in Day view. Description can be as long as you like. Select a calendar if you display more than one. Set a default reminder time. Set online presence: available or busy. Select calendar privacy from Default (as defined when calendar was created), Private, or Public. When finished, select Done. Pressing BACK also saves the event. Tip: Create an event quickly in the Day or Week view by selecting an empty time slot. A new Event details screen appears. The From field contains the selected time slot. 9.2 Alarm Clock To open Alarm Clock, on the Home screen, then touch icon. The Alarm clock offers as many alarms as you want. and select Clock Set an alarm Three alarms are set up for you, ready to customize. All two alarms are turned off by default. Select the check box to turn on the alarm. If no day shows under the set time, the alarm will go off once when the set time is reached. This alarm will go off at 9:00 am every Tuesday and Friday. To begin, select one of the default alarms to open Alarm settings. Set the following options:
Alarm: Select the check box to turn alarm on (checked) or off (cleared). This is the same check box that appears on the main Alarm Clock screen. Time: The time the alarm will go off is shown. To change this time, select Time to open the time selector. Slide the finger up or down to set the time you want, and then select Set. Repeat: The current repeat selection is shown. To change the setting, select Repeat and make a selection from the menu. To have your alarm will only go 33 off once at the set time, dont select any of the options. A one-time alarm is shown on the Alarm Clock screen without any days under the set time. Ring tone: The current ring tone selection is shown. Select Ring tone to pick another ring tone that will play when the alarm rings. (When you select a ring tone, it plays briefly.) Note that when your alarm goes off, the ring tone will play a maximum of five minutes. Vibrate: Select this check box to have your phone vibrate when it goes off. Once your alarm goes off, you will receive an alert with the options to Snooze
(for 10 minutes) or Dismiss. Add more alarms To add more than three alarms, from the main Alarm Clock screen, press MENU and select Add alarm. Change clock display You can change the appearance of the clock displayed on the main Alarm Clock screen:
1. Go to the main Alarm Clock screen. 2. Touch the clock with your fingertip to open the Clock selection screen. 3. Slide your fingertip horizontally along the bottom clock face row and touch the face you want to display. Change date & time display You can change the format of the time displayed in your alarms from the global Settings screen:
1. Go to the main Alarm Clock screen. On the Home screen, then touch and then press MENU and select Settings. Scroll down and select Date & time. The Date & time settings screen appears. 2. Use the network-provided values by selecting Automatic check box. 3. Select Use 24 hour format check box if you wish to use that rather than 12 hour format. 4. Select t Select date format option to open the menu of various date formats. 9.3 Calculator To open Calculator, on the Home screen, then touch and select the Calculator icon. 34 The Calculator offers two panels: basic and advanced. Switch back and forth between panels by pressing MENU and selecting Advanced panel or Basic panel, as you wish. Calculator panels Two calculators panels are available: basic and advanced. Use the Basic panel to enter numbers and perform basic addition, subtraction, multiplication, and division. Use the Advanced panel to insert advanced operators or delimiters, such as sine, cosine, tangent, square root, parentheses, etc. FCC Regulations:
This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. 35 FCC Information:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radion communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radion or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult your local RadioShack store or an experienced radio/TV technician for help. Changes or modifications not expressly approved by RadioShack my cause interference and void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device my not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 36 FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. SAR Information Statement Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency
(RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are 37 based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 0.352W/Kg and when worn on the body, as described in this user guide, is 0.461W/Kg(Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). The maximum scaled SAR in hotspot mode is 0.461W/Kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RFexposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after searching on FCC ID: 2AQ7MH25568K Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Asso-ciation (CTIA) web-site at http://www.wow-com.com. * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a 38 sub-stantial margin of safety to give additional protection for the public and to account for any variations in measurements. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 15mm must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. 39
| 1 2 3 4 5 6 7 8 | Usesr Manual | Users Manual | 216.05 KiB |
Contents Safety ................................................................................................................ 3 Environment .................................................................................................... 4 1 Getting Started .............................................................................................. 5 1.1 Getting to know your touch phone................................................... 5 1.2 Installing the SIM card and storage card .......................................... 5 1.3 Charging the Battery ....................................................................... 6 1.4 Starting up the device ...................................................................... 7 1.5 Status Icons ..................................................................................... 9 2 Using phone features .................................................................................. 10 2.1 Turning the phone function on and off ........................................... 10 2.2 Making a call ................................................................................ 10 2.3 Answering and Ending a call ......................................................... 11 2.4 In-call options ............................................................................... 11 2.5 Using call history .......................................................................... 12 2.6 Call settings .................................................................................. 12 3 Setting on your device................................................................................. 12 4 ActiveSync ................................................................................................... 16 5 Contacts....................................................................................................... 18 6 Exchanging Messages ................................................................................. 20 7 Internet ........................................................................................................ 25 7.1 Ways of Connecting to the Internet ................................................ 25 7.2 Browser ......................................................................................... 25 8 Experiencing Multimedia ........................................................................... 27 8.1 Camera & Picture .......................................................................... 27 8.2 Music ............................................................................................ 30 8.3 FM Radio ...................................................................................... 32 9 Other applications ...................................................................................... 32 9.1 Calendar ........................................................................................ 32 1 9.2 Alarm Clock .................................................................................. 33 9.3 Calculator ...................................................................................... 34 2 Safety Never attempt to disassemble your phone. You alone are responsible for how you use your phone and any consequences of its use. As a general rule, always switch off your phone wherever the use of a phone is prohibited. Use of your phone is subject to safety measures designed to protect users and their environment. Do not use your phone in damp areas (bathroom, swimming pool). Protect it from liquids and other moisture. Do not expose your phone to extreme temperatures lower than - 10C and higher than + 55C. The physicochemical processes created by chargers impose temperature limits when charging the battery. Your phone automatically protects the batteries in extreme temperatures. Do not leave your phone within the reach of small children (certain removable parts may be accidentally ingested). Electrical safety: Only use the chargers listed in the manufacturers catalogue. Using any other charger may be dangerous; it would also invalidate your warranty. Line voltage must be exactly the one indicated on the chargers serial plate. Aircraft safety: When traveling by plane, you will need to switch your phone off when so instructed by the cabin crew or the warning signs. Using a mobile phone may be dangerous to the operation of the aircraft and may disrupt the phone network. Its use is illegal and you could be prosecuted or banned from using cellular networks in the future if you do not abide by these regulations. Explosive materials: Please comply with warning signs at petrol station asking you to switch your phone off. You will need to comply with radio equipment usage restrictions in places such as chemical plants, fuel depots and at any location where blasting operations are under way. Electronic equipment: To avoid the risk of demagnetization, do not let electronic devices close to your phone for a long time. Electronic medical equipment: Your phone is a radio transmitter which may interfere with electronic medical equipment or implants, such as hearing aids, pacemakers, insulin pumps, etc. It is recommended that a minimum separation of 15 cm be maintained between the phone and an implant. Your doctor or the 3 manufacturers of such equipment will be able to give you any advice you may need in this area. Hospitals: Always make sure that your phone is switched off in hospitals when so instructed by warning signs or by medical staff. Road safety: Do not use your phone when driving. In order to give your full attention to driving, stop and park safely before making a call. You must comply with any current legislation. Distance of operation: This phone model has been tested and meets radiofrequency exposure guidelines when used as follows:
Against the ear: Place or receive a phone call and hold the phone as you would a wire line telephone. Body worn: When transmitting, place the phone in a carry accessory that contains no metal and positions the phone a minimum of 2.5 cm form your body. Use of other accessories may not ensure compliance with radiofrequency exposure guidelines. If you do not use a body worn accessory and are not holding the phone at the ear, position the phone a minimum of 2.5 cm from your body, Data operation: When using a data feature, position the phone a minimum of 2.5 cm from your body for the whole duration of the data transmission. Environment Packaging: To facilitate the recycling of packaging materials, please obey the sorting rules instituted locally for this type of waste. Batteries: Spent batteries must be deposited at the designated collection points. The product: The crossed-out waste bin mark affixed to the product means that it belongs to the family of electrical and electronic equipment. To promote the recycling and recovery of waste electrical and electronic equipment (WEEE) and at the same time safeguard the environment, European regulations require you to obey the sorting rules instituted locally for this type of waste. 4 1 Getting Started 1.1 Getting to know your touch phone 1.2 Installing the SIM card and storage card You need to remove the back cover before you can install the SIM card and storage card. Also, you can remove and install the SIM card and storage card when the phone is turning on. To remove the back cover 1. Make sure your device is turned off. 2. Firmly hold the device with both hands and the front panel facing down. 3. Push the back cover up with your thumbs until it disengages from the device and then slide it up to remove. To install the SIM card The SIM card contains your phone number, service details, and phone book/
message memory. Your device is supported 2G, 3G (TD_SCDMA/WCDMA) or 4G (TD_LTE/FDD_LTE) SIM cards. 1. Remove the back cover if it is installed. 2. Locate the SIM card slot, and then insert the SIM card with its gold contacts facing down and its cut-off corner facing out the card slot. 3. Slide the SIM card completely into the slot. Note: The phone can be supported the double SIM cards. The card slot will be supported 3G
(TD_SCDMA/WCDMA) or 4G SIM card
(TD_LTE/FDD_LTE), but one SIM card can use 4G networks only. If you need to use 4G operation, please insert 4G card in the card slot
(network type is default 4G, defined in the menu Settings/More/Cellular networks/Preferred network type), If insert 3G or 2G card in the card slot, you can also use 3G or 2G operation only. Some legacy SIM cards may not function with your device. You should consult with your service provider for a replacement SIM card. There may be fees for this service. To install a memory card To have additional storage for your images, videos, music, and files, you can 5 purchase a memory card and install it into your device. 1. Make sure that your device is turned off, and then remove the back cover. 2. Locate the memory card slot on the upper part of the exposed right panel. 3. Insert the memory card into the slot with its gold contacts facing down until it clicks into place. Note: To remove the memory card, press it to eject it from the slot. 1.3 Charging the Battery Your device comes with a rechargeable Lithium-ion battery and is designed to use only manufacturer-specified original batteries and accessories. Battery performance depends on many factors, including network configuration, signal strength, and usage patterns. Warning: To reduce risk of fire or burns:
Do not attempt to open, disassemble, or service the battery pack. Do not crush, puncture, short external contacts, or dispose of in fire or water. Do not expose to temperatures above 60C (140F). Replace only with the battery pack designated for this product. Recycle or dispose of used battery as stipulated by local regulations. New batteries are shipped partially charged. Before you start using your device, it is recommended that you install and charge the battery. Some batteries perform best after several full charge/discharge cycles. Note: Only the AC adapter and USB sync cable provided with your device must be used to charge the device. Connect the USB connector of the AC adapter to the sync connector on your device, and then plug in the AC adapter to an electrical outlet to start charging the battery. As the battery is being charged while the device is on, a charging icon appears in the title bar of the Home screen. After the battery has been fully charged, a full battery icon appears in the title bar of the Home screen. Warning: Do not remove the battery from the device while you are charging it using the AC or car adapter. As a safety precaution, the battery stops charging before it overheats. 6 1.4 Starting up the device Power on/off To power off your phone, press & hold POWER. On release, the Phone options menu opens. Select Power off and confirm. To power on again, press & hold POWER. Silent mode To silence your phone quickly, press & hold the volume button to zero volume. Or on the Home screen. Screen sleep After a period of inactivity, your screen will go to sleep (display will turn black). In sleep, your phone uses less battery power. You can control this behavior:
Set screen timeout period 1. On the Home screen, touch and select Settings. 2. Select Display > Sleep. Select a time from the menu. Prevent sleep while charging 1. On the Home screen, then touch and select Settings. 2. Select Developer options > Stay awake check box. Lock screen & put phone to sleep Except when on a phone call, from any screen, press POWER (immediately). While not on a call, to lock your control buttons and screen from accidental touch activation, press POWER. You can increase the security of your phone by setting Screen lock pattern. Once set, in order to unlock your screen, youll have to draw the correct unlock pattern. You can set your screen unlock pattern as follows:
1. On the Home screen, touch and select Settings. 2. Select Security and then scroll down to Screen lock pattern. 3. Set or change your unlock pattern by selecting Screen lock pattern, as applicable. 4. Follow the prompts to define your pattern. Note: You must slide your finger along the screen to create the pattern, not select individual dots. Connect at least four dots. 7 If you want your pattern to be hidden as you draw it, clear Make pattern visible check box. Home screen The Home screen is your starting point for using all the applications on your phone. You can customize your Home screen to display applications, shortcuts, and widgets as you like. 1. The Home screen actually extends beyond the screen width. On Home screen, slide your fingertip left and right along the screen to reveal the full width of the Home screen. This additional space gives you more room to customize Home with applications, shortcuts, and widgets. 2. Create Home screen shortcuts and widgets:
On Home screen, hold the blank screen to select WIDGETS. Touch and hold to pick up an Application shortcut, a Shortcut to some of your saved information (such as a play list), a Widget (a clock or picture frame) for your Home screen. You can place the widget slide your fingertip right along the screen to reveal the width of the Home screen. The application, shortcut, folder, or widget appears on Home screen. 3. To create an application shortcut quickly, touch the application tab to reveal all the application icons, then touch & hold an application icon. Its shortcut is added to the Home screen. 4. To remove a shortcut or widget from your Home screen, touch & hold the item to enter Remove mode. Drag the item to Remove button and release. Youll know when your item is in Remove because the item and the tab will turn gray. 5. Move objects on the Home screen To move an icon or other item on the Home screen, you must first touch &
hold it to enter Remove. The object will magnify when its ready to be moved. Without lifting your finger (or youll drop out of remove mode), drag the object to the new position. To move an item to a section of the Home screen not in view, move it to the edge of the screen and hold it there for a moment. The screen view will shift; position the object and release. 8 1.5 Status Icons Connection status icons Along the top of your phone screen is the status bar. On the left side, icons will appear, notifying you of a new message, upcoming calendar event, or something else you should notice. On the right side of the status bar, youll see connection status icons. Network signal E:GSM 3G:TD_SCDMA, WCDMA 4G:TD_LTE, FDD_LTE Call forward Missed call SMS/MMS Alarm is set Sign-in/sync error Song is playing WLAN service connected Call in progress Wireless services are off (Airplane mode) Phone on mute Ringer is off Bluetooth is on Connected the earphone Battery is low Battery is charging Read your notifications When you see a notification in the status bar, touch the bar and slide your finger down the screen to open the list of notifications displayed in the sliding window. Ongoing notifications report activities such as call forwarding ON, current call status, song playing. Notifications report the arrival of new messages, calendar events, and alarms. You can clear notifications list by selecting CLEAR ALL notifications at the 9 bottom of the notifications window. To open the message, reminder, or other notification, you can touch the items. To close the notifications window, slide your finger up the screen. Notes: On the home screen, touch the bar and slide your finger down the screen to open the list of notifications displayed in the sliding window, you can touch the icon on the top of the screen to enter the shortcuts screen, such as Airplane mode, Wi-Fi, Bluetooth, Data connection, Airplane mode, you can open or close the selected function directly. 2 Using phone features 2.1 Turning the phone function on and off To enable or disable Airplane Mode In many countries, you are required by law to turn off the phone while on board an aircraft. Another way to turn off the phone function is to switch your device to Airplane Mode. When you enable Airplane Mode, all wireless radios on your device are turned off, including the phone function, Bluetooth, and WLAN. 1. Touch
> Settings > More > Airplane mode. 2. Touch Airplane mode to enable or disable. When you disable Airplane mode, the phone function is turned back on and the previous state of Bluetooth and WLAN are restored. Adjusting the volume Press Volume button on the side of the phone to show the volume screen. If the phone is in vibrating mode, the voice will be muted automatically and the device will vibrate when there is an incoming call. 2.2 Making a call On Home screen, you can touch
> Phone to enter the dial screen. 1. Touch the on-screen dial pad to enter a number, touch Delete button to delete numbers youve entered. Touch & hold to delete all the numbers in the 10 field. To dial a call, touch Call button (Green icon) to make a call. To end a call, touch End button (Red icon). 2. On the dial screen, touch Call history tab to show the call records, select an entry listed in the log to call the number. 3. Also, enter Contacts tab that the contacts with phone numbers are listed. Select a contact, and then select the phone number to dial the call. 2.3 Answering and Ending a call When you receive a phone call, the incoming voice call screen will appear, allowing you to either answer or ignore the call. 1. To answer an incoming call, slide ANSWER (Blue icon) button rightward. 2. To reject a call, slide REJECT button (Red icon) button leftward. 2.4 In-call options While on a call, reveal the in-call options: Speaker, Mute, Hold, End. Note that if Bluetooth services are on and you are connected to a hands-free device, the more menu indicator will show Bluetooth on. 1. Speaker: To use the speaker, select Speaker so it shows a black bar. To turn it off, select it again so the bar is unfilled. The status bar will display the icon when the speaker is on. 2. Mute: To mute your side of the conversation, select Mute so it shows a black bar. To turn it off, select it again so the bar is unfilled. The status bar will display the icon when Mute is on. 3. Hold: To put an active call on hold, select Hold so it shows a green bar. To resume the call, or take the call off hold, select it again so the bar is unfilled. If you take a call while already on a call, the first call will be placed on hold automatically. The status bar will display this icon when a call is on hold. 4. Add call: If you need to enter numbers while on a call, touch Add call. 5. Incoming call: During call in progress, if you are on a call (call in progress) when another call comes in (incoming call), you have a few choices:
Answer the incoming call and place the call in progress on hold. To switch calls at any time, touch Swap calls. 11 If you dont want to interrupt your call in progress, then touch END. If you have one call in progress and one caller on hold, to end both calls, touch End all. 6. While on a call, you can conference up to six callers, counting yourself. Note that you can also have an additional caller on hold during a conference call, regardless of how many participants are on the conference. Note: Whether the group call function can be used depends on whether the network operator supports and provides such function as well as whether you have applied for such function. Please contact network operator for details. 2.5 Using call history 1. The missed call icon appears in the title bar when you missed a call. 2. Use Call history tab to check who the caller was, or view all your dialed numbers, and received calls. To open Call history tab, touch Call history button in the phone screen to enter the call history list. 3. Scroll to select the contact or number you want to dial, touch Call button. 4. Tap and hold the selected contact you want to call, and then you can make to do the following options of call, send message or add to a contact on the shortcut menu. 2.6 Call settings On the dialing screen, press MENU > Settings to enter Call settings menu, you can make the operation of call settings and general settings. 3 Setting on your device Control phone-wide settings from the Home settings screen: touch and select Settings. 3.1 Wireless & networks Wi -Fi 1. Select this check box if you prefer to use Wi-Fi for your data connection. 2. Wi-Fi settings: Open the Wi-Fi settings screen; select it from the network list. Provide your user name or password if required. 12 Bluetooth 1. Use this check box to turn Bluetooth services on or off. 2. With Bluetooth services on, you can touch MENU to open the Bluetooth settings screen. SIM cards You can select to set the information of the SIM card, and activate or deactivate data connection. More Airplane mode on/off: When airplane mode is selected, all wireless connectivity is off. This icon selected. will display in the status bar when airplane mode is Callular network: Select data roaming capability. Select a wireless operator network - Scan for all available networks, or select a network automatically. Add or edit network Access Point Names (APNs) - Do not change this setting unless advised to do so by your wireless operator!
3.2 Device Display Brightness level: Select to open the brightness control, and then slide your finger along the brightness bar to set the level. In sunlight, increase the level. Sleep: Select to decide how long your phone must be inactive before the screen turns off. Sound & notification Select one user profile that you want and enter the following options:
Volumes: Select to open the volume control, and then slide your finger along the volume bar to set an incoming call ring volume or alarm, playing back music, videos. Phone ringtones: Select to decide on a ring tone to use for incoming calls. Note that you can override this setting for individual contacts in the Edit contact details screens. Default notification sound: Select a ring tone to use for a notification (e.g., new message). Note that you can override this setting for new Calendar event 13 notifications, text and multimedia message notifications. Go to the applications settings screens to select specific ring tones. Vibrate: Select to have your phone vibrate for incoming calls. Dial pad touch tones: Select to have a tone sound when you use the on-screen Dialer. Touch sounds: Select to have a sound play when you select an item on the screen either using touch. Apps View all the applications stored on your phone and how much space they occupy. If youve downloaded an application from Android Market, you can uninstall it from this screen. Select a specific application to:
1. Clear your user data (if you have any associated with a particular application). 2. Disassociate the application with any actions. 3. Uninstall - If youve downloaded an application from Android Market, you will be able to uninstall it from this screen by selecting Uninstall. Storage View and manage the data storage on your phone. 3.3 Personal Location Select a source for determining your location. Security Screen unlock pattern: Create a pattern you will be asked to draw before your screen will unlock. You can select to make the pattern visible or invisible as you draw it. SIM card lock settings: Lock your SIM card for extra security. You can also change your SIM card PIN from this screen. If you dont know your SIM PIN, you can obtain it from your wireless operator. Visible passwords: Select to have your password display as you type it. Unknown sources: Select this check box if you want the ability to download applications from the Web. With this check box not selected, you will only be able to download applications from Android Market. To ensure your personal 14 data and phone remain secure; it is recommended you not select this check box. Accounts Turn on/off synchronization for all services. Backup & reset You can select to reset your phone to factory settings. This will erase all your data from the phone and require you to sign in and go through the setup screens to use any of the applications. 3.4 System Date & time Set time, time zone, and date: Use Automatic unless you need to override the network values. Time format: Select from 12 or 24 hour formats. Date format: Select from a variety of formats. Developer options If you are an application developer, you may be interested in these settings:
USB debugging: If you want be able to communicate with your phone directly via USB, select USB debugging check box. Stay awake: To prevent your phone from sleeping while charging (via power adapter or USB), select Stay awake check box. About phone View your phone Status: This screen lists a variety of information, including your phone number, the network you are currently using, the type of network, signal strength, whether you are roaming or not, any WLAN addresses youre connected to, and more. View the model number and version information for your phone. 15 4 ActiveSync 4.1 Data synchronization Some applications on your phone (Contacts and so on) give you access to the same personal information that you can add, view, and edit on your computer using Web applications. This means that when you add, change, or delete your information in any of these applications on the Web, the updated information also appears on your phone, and vice verse. Also, if you lose your phone or if your phone is destroyed, your personal information is not lost and will appear, as before, on a replacement phone. This mirroring of information happens through over-the-air data synchronization, or data syncing. Data syncing occurs in the background and shouldnt ever get in your way. Youll know your data is being synchronized when you see this icon in the status bar:
Because sending large amounts of data back and forth over the air can take time and require considerable bandwidth, there are some settings on the phone that allow you to control data sync. Sync by application To control synchronization Contacts, you can do the following:
1. On the Home screen, then touch and select Settings. 2. Select Accounts. When any of the applications are synchronizing, you will see the sync icon
. You will also see the last time your data was synchronized. 3. By default, the personal information in Contacts will sync whenever you make a change or receive a new message. You can change this behavior:
Auto-sync: When selected, Auto-sync will sync Contacts automatically, as you make changes or receive new messages. When OFF, information will not be synced automatically, although you can force sync by using the individual application check boxes described below. 4. Sync problems:
If you see this icon to the left of the sync check box, then there was a temporary problem with the data synchronization. Check your data connection 16 and try again later. 4.2 Bluetooth You can use Bluetooth to send and receive calls using a headset or hands-free car kit. Turn on Bluetooth services 1. On the Home screen, then touch and select Settings. 2. Select Bluetooth, and then select Bluetooth check box to turn on Bluetooth services. When on, the Bluetooth icon appears in the status bar. 3. The other Bluetooth devices will see your phone in their scans for Bluetooth devices. Name your Bluetooth device 1. Make sure you have turned Bluetooth on. 2. Select Settings > Bluetooth > Bluetooth settings (touch MENU)> Rename this device. 3. Type the name for your device in the dialog box, and then select OK. 4. Your new device name appears on the Bluetooth settings screen. Pair & connect with Bluetooth devices Before your phone can communicate with a Bluetooth headset or hands-free car kit, the devices must pair, then connect:
1. Make sure you have turned Bluetooth on. 2. Your phone starts scanning for Bluetooth devices within range. As they are found, the devices appear in the list of Bluetooth devices. 3. To pair with a device in the list, select it. 4. Type the devices PIN and then Pair. 5. Once paired, select the device name to connect. 6. Pairing and connection status appear under the device name. 7. Once the other Bluetooth device shows connected status, you can start using it to make and receive phone calls. 8. To un-pair with a device, touch the icon on the side of device to open the context menu. Select Un-pair, as appropriate. If you select Un-pair when connected, you will be disconnected as well. Notes: The phone supports only the headset and hands-free Bluetooth profiles, 17 so if you try to connect to a device that is not a headset or hands-free car kit, then you will receive an unable to connect message. If you pair with a second headset while connected to the first, the first headset will remain connected. To switch connection to the second headset you must manually select that headset again after pairing. Rescan for Bluetooth devices If you want to update the list of Bluetooth devices, select Refresh. 5 Contacts The contacts on your phone are synced with your account contacts stored on the Web. To view the contacts on your phone, touch and select Contacts. Contacts belonging to a specific group (you can choose which group) are listed in the Contacts tab. Only those contacts you star as favorites are listed in the Favorites tab. Browse through your contacts by sliding your fingertip up and down on the screen. Another way to find a contact quickly is to use SEARCH button, input the first letter of the name youre looking for and touch search icon, the matching contacts are appeared on the screen. From the Contacts tab, you can:
1. Go to Contact details: Select the contacts name to open the Contact details screen, where all screen the information youve saved for this contact is displayed. 2. Take action on a contact: On the Contact details screen, you can view call the contacts number, send a text message, add or remove a star or edit the contact details. 3. On the Contact details screen, press MENU to open the context menu. From the menu you can select to share, place on home screen, or delete the contact. Add a contact 1. On the Home screen, then touch and select Contacts. Your contact list appears. 2. Touch the + icon on the right-down of the screen to add new contact. 18 3. Add all the information you want to store for this contact in the appropriate fields. You must add some information to save a contact. To change a default label, select the label name to open the label menu. Select a different label or create a custom label. To add more fields, select More fields. 4. You can assign a Caller ID icon to your contact by touching Caller ID icon. The Pictures application opens. Navigate to a picture and select it, size the cropper with your fingertips. When finished, select Done. The picture is associated with your contact. If you do not assign an icon, a default android icon will be assigned. 5. To save your contact, press BACK, or touch Done icon. Edit contact details You can always make changes to the information youve stored for a contact:
1 From Contacts, touch the contact you want to open the Contact details screen. 2. Select Edit icon. The Edit contact screen appears. 3. Make your edits, then press Done icon. Communicate with a contact From Contacts you can quickly call or text a contacts default number, as displayed below their name on the screen. However, to view all the information youve stored for a contact, and to initiate other types of communication with that contact, open the Contact details screen. To open a contacts details screen, simply select their name from Contacts. 1. Call a contact: From the contact list, touch the contact you want to open the Contact details screen. Touch the call number directly to dial that contacts primary number (first in the list on their details screen). 2. To dial a different number for the contact, select the contacts name, and then select the number on their details screen and then touch the call number that you want. 3. Send a text or multimedia: To send a text or multimedia message to a contact, you must have a message to a contact mobile number stored for them in contact details. From the Contact details screen, select a phone number and click Message icon, A Compose screen opens for your new message. Complete your message and select Send. 19 4. Send email to a contact: To send an email message to a contact, you must have an email address stored for them in their contact details. Select the contact you want to email. Their Contact details screen opens. In the Send email section, select the email address. If you are fetching POP3 or IMAP email accounts to your phone, then select the account you wish to use to send. A Compose screen opens for your new message. Complete your message, select Send. SIM contacts importer If you have stored names and phone numbers on your SIM card, you can add these to the Contacts stored on your phone by selecting this settings option. From the contact list, press MENU to select Import/export, you can select to import from SIM card or memory card, once the list of names and numbers appears you can:
Import only certain names/numbers in the list - Select the name/number you want to import, then repeat for others as you wish. (As soon as you select the name/number, it is imported) 6 Exchanging Messages 6.1 SMS and MMS messaging To open the SMS & MMS Messaging application, on the Home screen, then touch and select Messaging icon. About text and multimedia messages SMS messages are also know as text messages and can each be around 160 characters. If you continue to type after the limit is reached, your message will be delivered as one, but count as more than one message. These are called concatenated messages. MMS messages are also known as multimedia or picture messages and can contain text, picture, audio, and video files. When you compose a message, the phone will automatically convert a text message into a multimedia message as soon as you add a subject or an attachment, or if you address the message using an email address rather than a 20 phone number. View the message from the message list Select a message thread in the list to open it for reading. When open, the individual messages appear stacked on the screen, much like with instant messaging conversations (or chats). Note that messages you send are also listed in the Read view. 1. Reading multimedia messages If you have selected to auto-retrieve your multimedia messages, then both the message header and body will download. If you are downloading only the headers, then you must first select the Download button to retrieve the message body. If you are concerned about the size of your data downloads, you can check the message size before you download. Once the message has downloaded, select Play button to view the message. From a message read view, you can do the following:
1. To view details about a particular message, in the Read view, touch & hold the message to open the context menu. Select View details. 2. Reply to a message: Simply start typing your message in the text box at the bottom of the screen to reply to a message. You can always press MENU and select to add a subject or an attachment to convert it to a multimedia message. Select Send when ready. 3. Links in messages: If a message contains a link to a Web page, it will be selectable. To view the Web page in the Browser, simply select it. 4. Delete messages: Your messages will be saved until you explicitly delete them. Delete one message in a thread - With the message thread open in Read view, touch & hold the individual message you want to delete to open the context menu, and then select Delete. Delete all messages in a thread - From the message list, you can also delete an entire thread from the message list by pressing & holding the thread, then touch Delete icon on the bottom of the screen. Delete all message threads - From the message list, press MENU and select 21 Delete all threads. Compose text and multimedia messages 1. Touch + Compose icon. The Compose screen opens. 2. Add recipients by typing a name, phone number, or email address in the Type name or number field. Matching contacts will appear. Select the recipient or continue typing. Add as many recipients as you wish. If you send the message to an email address, the message will automatically convert from a text to a multimedia message. 3. To add a subject, press MENU and select Add subject. If you add a subject, the message will convert to a multimedia message. 4. To add an attachment, touch + icon. Adding an attachment will always convert the message to a multimedia message. Select from audio or picture files. You can select to take a new picture if you want, or record an audio file. Any recordings you make will be stored automatically in Music application in a play list named My recordings. To remove an attachment, select the attachments Remove button. 5. Type your message. As you type, youll be able to track how many characters/messages youre creating. Remember that text messages have a limit around 160 characters. Once you go over that limit, a new message is actually created but automatically joined into one when received. 6. Select Send when ready. You can also save a draft. 7. As your message sends, progress displays in the title bar. If you see this icon to the right of the message, it means your message is still being delivered. Save message as draft While composing, press BACK, your message automatically saves as a draft. Text and multimedia message settings To set text and multimedia message preferences, from the message list, press MENU and select Settings. 6.2 POP3 and IMAP email accounts Add an email account You can fetch messages from up to five POP3 or IMAP accounts. Follow these steps:
22 1. On the Home screen, then touch and select Email application. 2. The Set up new account screen appears. 3. Type your account email address and password. 4. If you want, select the Send email from this account by default check box. This setting only applies if you have more than one POP3 or IMAP account set up. 5. Select Next. If you have a popular email account, the application will set everything up for you! Before you go to your Inbox, you can name the account (if you dont, your email address will be used). You are also asked to type your name as you want it to display on outgoing messages. You must complete this field before you can select Next and go to your Inbox. For less popular accounts, follow the prompts to type the email server, protocol, and other account information yourself. After your account settings have been verified, select Next to go to your Inbox. 6. To add more accounts (up to five), from an Inbox or your Accounts screen, press MENU and select Add account. Use your POP3 and IMAP email account Once youve set up an account, you can do the following:
1. Refresh Inbox: From the Inbox, press MENU and then select Refresh to update your Inbox with any previously-unfetched email. 2. Read email: You can display or collapse the messages in your Inbox by selecting Inbox. Unread messages display with a colored band. (Each account you add will use a different color.) 3. Forward, Reply, Reply all: You can forward, reply, or reply all to an email message from the Inbox. From the Inbox, touch & hold the message to open its context menu. Select the action you want to take. 4. Compose new From the Inbox: 1. Press MENU and select Compose. 2. Add recipients by typing a name or address in the To field. Matching contacts will appear. Select the recipient or continue typing the address. Add as many as you wish. 3. Type a subject and message. 4. Select Send, Save as draft, or Discard. Pressing 23 BACK will also save as draft unless you have not typed anything. 5. Delete message From the Inbox: 1. Expand the Inbox to display the messages. 2. Touch & hold the message you want to delete. 3. Select Delete. 4. Your message is moved to the Trash. 6. Empty Trash: Once youve moved a message to the Trash, to empty messages in the Trash you must delete each message individually. Press MENU and select Folders to enter the Trash. Note that the message is only deleted from your phone, not from the account server. 7. Remove an email account: You can always remove a POP3 or IMAP email account from your phone. Go to your Inbox, press MENU and select Accounts. Your Accounts screen opens. Touch & hold the account you want to remove to open the context menu. Select Remove account. You will be asked to confirm before the account is removed. Edit account settings To open your Account settings screen, do the following:
1. From your account Inbox, press MENU and select Account settings. 2. The Account settings screen appears. You can do the following from this screen:
Account name: Select to change the name of your account as it appears on your Accounts screen. Your name: Select to change your name as it appears in outgoing email. Email check frequency: Select this pop-up menu to set how frequently your email account is checked for new messages. Note that whenever you open a folder, email is refreshed, regardless of this setting. Default account: If you have more than one POP3 or IMAP email account set up on your phone and want to use this account by default when selecting Compose from the Accounts screen, select this check box. Email notifications: If you want an icon to appear in the status bar when a new message arrives, select this check box. Incoming server settings: Select Incoming settings if you need to edit the 24 username/ password, server, port, or option to delete email from server. Outgoing server settings: Select Outgoing settings if you need to edit the SMTP server, port, security type, option to require sign-in, or username/password. Add another POP3 or IMAP To add another account (you can add up to five), go to your Inbox, press MENU and select Accounts. Your Accounts screen opens. Press MENU and select Add account another account. 7 Internet 7.1 Ways of Connecting to the Internet Your devices networking capabilities allow you to access the Internet or your corporate network through WLAN, GPRS, TD-SCDMA/WCDMA or FDD_LTE/TD_LTE (if SIM card supported). You can also add and set up a VPN or proxy connection. WLAN WLAN provides wireless Internet access over distances of up to 100 meters
(300 feet). To use WLAN on your device, you need access to a wireless access point or hotspot. Note: The availability and range of your devices WLAN signal depends on the number, infrastructure, and other objects through which the signal passes. 7.2 Browser To open the Browser, touch and select Browser icon. The Browser always opens to the last Web page you were viewing. The first time you enter the Browser after powering on, your home page will display. You can change your home page by pressing MENU > Settings >General > Set homepage. The Browse screen From the Browse screen you can do the following:
1. Go to a Web page: Make sure the focus is not on a text box and then start typing the URL. 2. Add a bookmark: Bookmark the Web page you are currently viewing:
Press MENU and select Save to bookmarks. 25 Confirm the URL and name, and then select OK. To view all your bookmarks, press MENU and select Bookmarks. 3. Refresh a Web page: To refresh the contents of the current page, press MENU and select Refresh. Open pages in separate windows You can keep more than one Web page open by using multiple windows to display the pages. You can open up to eight windows. Open a new window: From a Web page, press MENU and select Windows. The Current windows screen opens, showing the Web page you started from, plus a new window. Select New window. Your home page opens in a new window. To return to one of the other windows, press MENU and select Windows. Select the page you want to view. Manage bookmarks You can store as many bookmarks as you want on your phone. Press MENU and select Bookmarks. The Bookmarks screen opens. 1. Bookmark any page: Select Add. Type a name and location (URL) in the dialog box. Select OK. 2. Send bookmarked pages URL: Touch & hold the bookmark you want to open. The context menu opens. Select Share link. An email Compose screen opens with the URL as the message. Address your message and finish composing and select Send. 3. View bookmarked page: Touch & hold the bookmark you want to open. The context menu opens. Select View page or Open in new window. 4. Edit bookmark: Touch & hold the bookmark you want to e open. The context menu opens. Select Edit bookmark. The edit bookmark dialog box opens. Type your change and select OK. 5. Delete a bookmark: Touch & hold the bookmark you want to open. The context menu opens. Select Delete bookmark. You will be asked to confirm. 6. Bookmark current page: Go to a Web page you want to bookmark. Press MENU and select Bookmarks. The Bookmarks screen opens. Press MENU and select Bookmark last-viewed page. The Bookmark link dialog box opens. Confirm or edit the information, then select OK. 26 Set your home page You set your home page from the Settings screen:
1. Press MENU and select More > Settings. The Settings screen opens. 2. In the Page content section, select Set home page to open the dialog box. 3. Type the URL of the page you want to set as home, and then select OK. Download Web files and applications Before you download any files or applications using the Browser, note the following:
1. Before you can download Web applications, you must explicitly allow downloading from the Home > Settings screen:
On the Home screen, then press and select Settings. Select Security, then select Unknown sources check box. 2. All items downloaded form the Web are stored on your memory card, so be sure you have a card installed in your phone before you download from the Browser. 3. The Browser will only allow you to download items that are supported by an application installed on the phone. Warning! Applications downloaded from the Web can be from unknown sources. To protect your phone and personal data, only download applications from sources you trust, such as Android Market. 8 Experiencing Multimedia 8.1 Camera & Picture All the pictures you can capture or view on your phone are stored on memory card, which must be installed in your phone. Before you can use the Camera or view pictures in Pictures, make sure you have a card installed. Load pictures onto your memory card Read the instructions below to add pictures to your Memory card or the phone storage. 1. Mount your memory card to your computer by doing one of the following:
Remove the memory card and insert it into a card reader attached to your 27 computer. 2. On your computer, find the mounted USB drive and open it. 3. Create a folder at the top-level called Pictures or some other descriptive name and open it. 4. Copy .jpg or other image files into this folder. To organize pictures into albums that will display in the Pictures application, create a folder and copy pictures there for each album you want to display. 5. When finished, close the USB drive window and eject the drive as required by your computer's operating system. Take a picture Captured pictures are saved to the DCIM folder on your memory card or the phone. Before you take a picture, wipe the sensor window (on the back cover) to remove any small amounts of oil. 1. To open the Camera, on the Home screen, touch and select Camera icon. 2. The Camera opens in capture mode. Frame your picture within the screen and hold the phone steady. Touch Camera button to capture. Continue to hold the camera steady for a second after you hear the shutter sound. 3. If you select to save, set as, or share, your picture is saved to Gallery application. View your pictures To view the pictures youve captured, as well as any youve stored on your memory card or the phone storage, go to Gallery application:
1. To open Pictures, on the Home screen, touch and select Gallery icon. 2. Depending on how many pictures youve stored, they may take a few minutes to load. 3. If youve stored your pictures in folders on your Memory card, then the folders will display as separate albums. The top left album always contains all the pictures in all the albums. 4. The individual pictures display in a grid in thumbnail format. You can select to display smaller or large thumbnails in Settings. 5. To open a picture in full-screen view, touch the picture. Once in full-screen, 28 select the arrows to scroll through the pictures within that album. If the arrows disappear, touch the picture again to reveal the arrows and zoom controls. Picture options You can do the following while in Pictures. Note: In all the instructions below, you can touch & hold a picture to open the context menu to access all actions, rather than open the picture in full-screen view. 1. View full-screen: Select a picture to open it in full-screen view. 2. Share a picture: In full-screen view, press MENU and select Share. Select to share your picture via Messaging (MMS), or another application (if you have another application installed on your phone that supports sharing). 3. Set as wallpaper: In full-screen view, press MENU and select Set picture as. From the menu that opens select Wallpaper. Touch & hold an edge of the cropper to reveal the sizing arrows, then drag the edge in or out to size. Touch &
drag the center of the cropper to move it within the picture. When youre happy with the cropped area, select Save. 4. Set as contact picture: In full-screen view, press MENU and select Set picture as. From the menu that opens, select Contact icon. Your contact list opens. Select the contact you want to associate with the picture. Touch & hold an edge of the cropper to reveal the sizing arrows, then drag the edge in or out to size. Touch & drag the center of the cropper to move it within the picture. When youre happy with the cropped area, select Save. The picture will now appear in the Contact details screen, as well as on any incoming call notifications. 7. Crop picture: In full-screen view, press MENU and select Crop. Touch &
hold an edge of the cropper to reveal the sizing arrows, then drag the edge in or out to size. Touch & drag the center of the cropper to move it within the picture. 3 When you are happy with the cropped area, select Save. Select Discard to cancel the crop. The cropped picture is saved to Pictures as a copy. Your original is not touched. 8. Rotate picture: In full-screen view, press MENU and select Rotate. Select from Rotate left (counter-clockwise) or Rotate right (clockwise). Your picture rotates and is saved automatically. 29 9. Delete picture: In full-screen view, press MENU and select Delete. The picture will be removed from the Memory card after you confirm. 10. View picture details: In full-screen view, press MENU and select Details. The picture details window opens. You can see the title, resolution, file size, and date of the picture. 8.2 Music To open your music Library, on the Home screen, touch Music icon. Your music is organized into four categories: Artists, Albums, Songs, and Play lists. Select a category to view the lists within each. Once in a category, keep selecting until you reach the music you want to play. For example, if you select the Artists category, you will see a list of artists in A-Z order. If you select an artist, the list opens to display that artists albums. Select an album, and the albums song list displays. Load music onto your Memory card All the music you can listen to on your phone is stored on memory card. Read the instructions below to add music to your memory card. 1. Mount your memory card to your computer by doing one of the following:
Remove the memory card and insert it into a card reader attached to your computer; or, attach your phone to your computer using a USB cable that came in the box. If you use this method, make sure the Home > Settings > Storage >
SD card is selected. 2. On your computer, find the mounted USB drive and open it. 3. Although your phone will find all music files on your memory card, its advisable to keep the number of files or folders at the root level to a minimum. So, if you wish, create a folder at the top-level called music (or whatever you want) to store your files. 4. Open this folder and copy music files into it. If you want, create folders within music to organize your music further. If you want to use certain music files as phone, notification, or alarm ring tones. Note: If you do not want a ringtone to appear in your music Library but you do want it to be available as a ringtone, and then create the ringtones, notifications, or alarms folder outside your music folder. 30 5. When finished copying, close the USB drive window and un-mount or eject the drive as required by your computer's operating system. Remove the USB cable from your phone and computer. Play back music At any level in your Library, touch & hold a listing (a song, artist, album, or playlist) to open the context menu. Select Play to begin play and go to the Playback screen. You can do the following using the Playback screen:
1. Shuffle songs: Shuffle plays songs in random order. Touch to toggle shuffle on and off. When the con is grey, shuffle is off. 2. Repeat mode: Touch to step through repeat modes: repeat all songs, repeat current song, dont repeat (grey icon). 3. Go to any point in song: Slide fingertip in progress bar to desired point in a song. 4. Playback control: from left to right icons: Go to beginning song, Pause/
resume play and Go to next of song. If a song is playing while you are on the Library screen, you can switch to the Playback screen quickly by selecting the lower song bar. Playlists You can create as many playlists as you wish. Note that the Recently added playlist is a system playlist and cannot be deleted or renamed. Also, if you make any voice recordings as part of a MMS message, they will be stored automatically in a playlist called My recordings. Create a playlist on your phone 1. From the Library, select a category. From the list that appears, navigate to the artist, album, or song that you want on a playlist. 2. Touch & hold the artist, album, or song to open the context menu. 3. Select Add to playlist. 4. In the Add to playlist menu that opens, select New to create a new playlist, or one of the existing playlists. 5. The song(s) are added. Manage your playlists Go to the Library screen and select Playlists. All your playlists appear. 31 Touch & hold the playlist to open the context menu. You can do the following from this screen: Play, Edit (rearrange songs), Delete and Rename. Create ringtones from songs You can set any of your songs as a phone ringtone:
1. From the Library, navigate to a song you want to use as a phone ringtone. 2. Touch & hold the song in the list to open the context menu. 3. Select Use as phone ringtone. The ringtone is set as your default incoming call ringtone. 4. Now, when you go to Home > Settings > Audio profiles, and select a phone ringtone, your song will be listed as an option. Delete music from memory card All the music you play on your phone is stored on the inserted memory card. From your phone, you can delete music stored on the card:
1. From the Library screen, select the Artists, Albums, or Songs category. 2. Go to the screen that shows the artist, album, or song that you want to delete. 3. Touch & hold the item to open the context menu. 4. Select Delete. You will be asked to confirm that you want to delete the item from your memory card. 8.3 FM Radio This device provides radio function. Note: Within doors or shielded environment, the receiving effect of radio may be affected. You can improve the effect in the following ways: Near window, adjust the position of earphone cable or adopt manual adjustment. 9 Other applications 9.1 Calendar Calendar views You can view multiple calendars on your phone, so each calendar event is coded with a color. You can view your calendar in a variety of ways. Touch the date on the left-top of the screen to select from Day, Week, Month or Agenda. Create an event 32 From any of the views, press MENU and select New event to open the new Event details screen. Type the information in the fields. Select date & time. Name that appears in Day view. Description can be as long as you like. Select a calendar if you display more than one. Set a default reminder time. Set online presence: available or busy. Select calendar privacy from Default (as defined when calendar was created), Private, or Public. When finished, select Done. Pressing BACK also saves the event. Tip: Create an event quickly in the Day or Week view by selecting an empty time slot. A new Event details screen appears. The From field contains the selected time slot. 9.2 Alarm Clock To open Alarm Clock, on the Home screen, then touch icon. The Alarm clock offers as many alarms as you want. and select Clock Set an alarm Three alarms are set up for you, ready to customize. All two alarms are turned off by default. Select the check box to turn on the alarm. If no day shows under the set time, the alarm will go off once when the set time is reached. This alarm will go off at 9:00 am every Tuesday and Friday. To begin, select one of the default alarms to open Alarm settings. Set the following options:
Alarm: Select the check box to turn alarm on (checked) or off (cleared). This is the same check box that appears on the main Alarm Clock screen. Time: The time the alarm will go off is shown. To change this time, select Time to open the time selector. Slide the finger up or down to set the time you want, and then select Set. Repeat: The current repeat selection is shown. To change the setting, select Repeat and make a selection from the menu. To have your alarm will only go 33 off once at the set time, dont select any of the options. A one-time alarm is shown on the Alarm Clock screen without any days under the set time. Ring tone: The current ring tone selection is shown. Select Ring tone to pick another ring tone that will play when the alarm rings. (When you select a ring tone, it plays briefly.) Note that when your alarm goes off, the ring tone will play a maximum of five minutes. Vibrate: Select this check box to have your phone vibrate when it goes off. Once your alarm goes off, you will receive an alert with the options to Snooze
(for 10 minutes) or Dismiss. Add more alarms To add more than three alarms, from the main Alarm Clock screen, press MENU and select Add alarm. Change clock display You can change the appearance of the clock displayed on the main Alarm Clock screen:
1. Go to the main Alarm Clock screen. 2. Touch the clock with your fingertip to open the Clock selection screen. 3. Slide your fingertip horizontally along the bottom clock face row and touch the face you want to display. Change date & time display You can change the format of the time displayed in your alarms from the global Settings screen:
1. Go to the main Alarm Clock screen. On the Home screen, then touch and then press MENU and select Settings. Scroll down and select Date & time. The Date & time settings screen appears. 2. Use the network-provided values by selecting Automatic check box. 3. Select Use 24 hour format check box if you wish to use that rather than 12 hour format. 4. Select t Select date format option to open the menu of various date formats. 9.3 Calculator To open Calculator, on the Home screen, then touch and select the Calculator icon. 34 The Calculator offers two panels: basic and advanced. Switch back and forth between panels by pressing MENU and selecting Advanced panel or Basic panel, as you wish. Calculator panels Two calculators panels are available: basic and advanced. Use the Basic panel to enter numbers and perform basic addition, subtraction, multiplication, and division. Use the Advanced panel to insert advanced operators or delimiters, such as sine, cosine, tangent, square root, parentheses, etc. FCC Regulations:
This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. 35 FCC Information:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radion communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radion or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult your local RadioShack store or an experienced radio/TV technician for help. Changes or modifications not expressly approved by RadioShack my cause interference and void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device my not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 36 FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. SAR Information Statement Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency
(RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are 37 based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 0.354W/Kg and when worn on the body, as described in this user guide, is 0.522W/Kg(Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). The maximum scaled SAR in hotspot mode is 0.522W/Kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RFexposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after searching on FCC ID: 2AQ7MH25568K Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Asso-ciation (CTIA) web-site at http://www.wow-com.com. * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a 38 sub-stantial margin of safety to give additional protection for the public and to account for any variations in measurements. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 15mm must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. 39
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2018-11-05 | JBP - Part 15 Class B Computing Device Peripheral | Class II permissive change or modification of presently authorized equipment | |
| 2 | 2412 ~ 2462 | DTS - Digital Transmission System | ||
| 3 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 4 | 1852.4 ~ 1907.6 | PCE - PCS Licensed Transmitter held to ear | ||
| 5 | 2018-10-30 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment | |
| 6 | 2018-10-29 | 1852.4 ~ 1907.6 | PCE - PCS Licensed Transmitter held to ear | |
| 7 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
| 8 | 2412 ~ 2462 | DTS - Digital Transmission System |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 2 3 4 5 6 7 8 | Effective |
2018-11-05
|
||||
| 1 2 3 4 5 6 7 8 |
2018-10-30
|
|||||
| 1 2 3 4 5 6 7 8 |
2018-10-29
|
|||||
| 1 2 3 4 5 6 7 8 | Applicant's complete, legal business name |
General Procurement, Inc
|
||||
| 1 2 3 4 5 6 7 8 | FCC Registration Number (FRN) |
0027839612
|
||||
| 1 2 3 4 5 6 7 8 | Physical Address |
800 E. Dyer Road
|
||||
| 1 2 3 4 5 6 7 8 |
Santa Ana, California 92705
|
|||||
| 1 2 3 4 5 6 7 8 |
United States
|
|||||
| app s | TCB Information | |||||
| 1 2 3 4 5 6 7 8 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
| 1 2 3 4 5 6 7 8 |
s******@generalprocurement.com
|
|||||
| 1 2 3 4 5 6 7 8 |
t******@timcoengr.com
|
|||||
| 1 2 3 4 5 6 7 8 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
| 1 2 3 4 5 6 7 8 |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
| 1 2 3 4 5 6 7 8 |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|||||
| app s | FCC ID | |||||
| 1 2 3 4 5 6 7 8 | Grantee Code |
2AQ7M
|
||||
| 1 2 3 4 5 6 7 8 | Equipment Product Code |
H25568K
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 2 3 4 5 6 7 8 | Name |
S**** B********
|
||||
| 1 2 3 4 5 6 7 8 | Title |
Manager
|
||||
| 1 2 3 4 5 6 7 8 | Telephone Number |
949 6********
|
||||
| 1 2 3 4 5 6 7 8 | Fax Number |
949 6********
|
||||
| 1 2 3 4 5 6 7 8 |
s******@generalprocurement.com
|
|||||
| app s | Technical Contact | |||||
| n/a | ||||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 2 3 4 5 6 7 8 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 2 3 4 5 6 7 8 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 2 3 4 5 6 7 8 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 05/04/2019 | ||||
| 1 2 3 4 5 6 7 8 | 04/27/2019 | |||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 2 3 4 5 6 7 8 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 2 3 4 5 6 7 8 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
| 1 2 3 4 5 6 7 8 | DTS - Digital Transmission System | |||||
| 1 2 3 4 5 6 7 8 | DSS - Part 15 Spread Spectrum Transmitter | |||||
| 1 2 3 4 5 6 7 8 | PCE - PCS Licensed Transmitter held to ear | |||||
| 1 2 3 4 5 6 7 8 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Smart Phone with BT, WIFI | ||||
| 1 2 3 4 5 6 7 8 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 2 3 4 5 6 7 8 | Modular Equipment Type | Does not apply | ||||
| 1 2 3 4 5 6 7 8 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
| 1 2 3 4 5 6 7 8 | Original Equipment | |||||
| 1 2 3 4 5 6 7 8 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
| 1 2 3 4 5 6 7 8 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 2 3 4 5 6 7 8 | Grant Comments | Output Power listed is the maximum conducted output power. SAR compliance for body-worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.0-cm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission conditions are <0.10 W/kg, <0.10 W/kg, <0.10 W/kg, and 0.49 W/kg, respectively. This device supports 20 MHz bandwidth modes | ||||
| 1 2 3 4 5 6 7 8 | Power listed is conducted. | |||||
| 1 2 3 4 5 6 7 8 | Power listed is ERP for part 22, EIRP for part 24. For body-worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 1.0cm from the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, product specific (wireless router), and simultaneous transmission conditions are 0.35W/kg, 0.46W/kg, 0.46W/kg, and 0.49W/kg respectively. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations. | |||||
| 1 2 3 4 5 6 7 8 | Power listed is ERP for part 22, EIRP for part 24. For body-worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 1.0cm from the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, product specific (wireless router), and simultaneous transmission conditions are 0.35W/kg, 0.52W/kg, 0.52W/kg, and 0.54W/kg respectively. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations. | |||||
| 1 2 3 4 5 6 7 8 | Output Power listed is the maximum conducted output power. SAR compliance for body-worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.0-cm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission conditions are <0.04 W/kg, <0.02 W/kg, <0.02 W/kg, and 0.54 W/kg, respectively. This device supports 20 MHz bandwidth modes. | |||||
| 1 2 3 4 5 6 7 8 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 2 3 4 5 6 7 8 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 2 3 4 5 6 7 8 | Firm Name |
Shenzhen Zhongjian Nanfang Testing Co., Ltd.
|
||||
| 1 2 3 4 5 6 7 8 | Name |
B****** Z******
|
||||
| 1 2 3 4 5 6 7 8 | Telephone Number |
+86 (********
|
||||
| 1 2 3 4 5 6 7 8 |
b******@ccis-cb.com
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15B | CC | ||||||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 2 | 1 | 15C | CC | 2402 | 2480 | 0.0005 | |||||||||||||||||||||||||||||||||||
| 2 | 2 | 15C | CC | 2412 | 2462 | 0.01932 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 3 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0033810 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 4 | 1 | 22H | 824.2 | 848.8 | 0.6442 | 0.206789 ppm | 250KGXW | ||||||||||||||||||||||||||||||||||
| 4 | 2 | 24E | 1850.2 | 1909.8 | 0.9247 | 0.09415 ppm | 252KGXW | ||||||||||||||||||||||||||||||||||
| 4 | 3 | 22H | 826.4 | 846.6 | 0.05794 | 0.204399 ppm | 4M16F9W | ||||||||||||||||||||||||||||||||||
| 4 | 4 | 24E | 1852.4 | 1907.6 | 0.1074 | 0.102128 ppm | 4M18F9W | ||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 5 | 1 | 15B | CC | ||||||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 6 | 1 | 22H | 824.2 | 848.8 | 0.6442 | 0.206789 ppm | 250KGXW | ||||||||||||||||||||||||||||||||||
| 6 | 2 | 24E | 1850.2 | 1909.8 | 0.9247 | 0.09415 ppm | 252KGXW | ||||||||||||||||||||||||||||||||||
| 6 | 3 | 22H | 826.4 | 846.6 | 0.05749 | 0.204399 ppm | 4M16F9W | ||||||||||||||||||||||||||||||||||
| 6 | 4 | 24E | 1852.4 | 1907.6 | 0.1074 | 0.102128 ppm | 4M16F9W | ||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 7 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0033810 | |||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 8 | 1 | 15C | CC | 2402 | 2480 | 0.0005 | |||||||||||||||||||||||||||||||||||
| 8 | 2 | 15C | 2412 | 2462 | 0.01932 | ||||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC