1. Product summary GK1500EX Specification sheet 2018-12 1 of 10 Universal kiosk EX can use the RF card to check the availability of the RF ID reader and then deposit and withdraw money at the user's discretion and request a transaction detail sheet for the transaction.
*RF Reader GK1500EX Specification sheet 2018-12 2 of 10 GK1500EX User Manual 1 2 5 6 9 3 4 8 7 10 GK1500EX Specification sheet 2018-12 3 of 10 1. Speaker
: Notify by alarm or voice depending on transaction. 2. Display and Touch screen
: Touch the screen to make the desired transaction. 3. Card slot
: Users can use magnetic, ID and RFID. 4. Earphone
: Connect earphone with alarm or voice support. 5. Transaction Receipt Chart exit
: It can be received by user selection. 6. Encryption Pin Pad
: Used to enter user card password. 7. Barcode
: 1D and 2D barcodes are available. 8. Coin dispenser
: Coin withdrawal by transaction. 9. Bill acceptor
: Deposit banknotes as a transaction request 10. Bill dispenser
: Banknote withdrawal by transaction This product can be developed by software vendors (os for Linux or Windows) GK1500EX Specification sheet 2018-12 4 of 10 GK1500EX Specification sheet 2018-12 5 of 10 2. RC Unit (CU ) Item Spec. Remarks Processors Chipset Memory Intel i5 3570 3.4GHz H61 DDR3-800/1066 SO-DIMM slot up to 16GB Default : 4Gbytes Hard Drive Drives SSD 250GB Optical Disk Drive None Graphics Audio Codec Intel HD Graphics 2500 series Realtek ALC662 5.1 Channel Audio Communication 2*Realtek RTL8111EVL PCI-E Gigabit Ethernet Power unit SH-270(270W) (110/ 220 select support) I/O Ports PS2 * 1 Audio *2 Serial * 10, Lan *2, USB2.0 *8, HDMI *1, VGA *1 Operating System Microsoft Windows Professional 7 3. Receipt Printer ( RPU ) GK1500EX Specification sheet 2018-12 6 of 10 Item Spec. Remarks Print type Main CPU Memory Input Voltage Thermal Line Printer 32 bit Cortex-M3 64 X 16 bit SRAM
-5V (1A) for logic circuitry
-24V (2A) for driving motor and thermal head Communication RS232(RJ-45) Option : USB Graphic 200 DPI Monographic printing Dimension 360(W) X 200(H) X 138(T) mm Weight 2.75kg Feeding
-Feeding Method: friction
-Feeding Speed: Max 150mm/s
(Normal 100mm/s, Low 50mm/s)
-Feeding Pitch: 0.125mm Loading Semi-automatic paper loading and cutting
-Roll Type: OSC recommended (outside coated)
-Roll Diameter: Max 216mm Receipt Paper Roll
-Width: 76mm
-Thickness: 0.110mm or larger recommended
(min 0.065mm, max 0.13mm) Paper out status sensor Black-Mark sensor Sensor GK1500EX Specification sheet 2018-12 7 of 10 4. Cash Dispenser ( CDU ) Item Spec. Type Presenter Type Maintenance Front Service Type Remarks Cassette Capacity Max. 2,000 notes (New Notes) 0.1mm/new note Number of Cassette 2 Cassettes Reject Capacity Reject Bin: Max. 200 notes Dispensing Speed 4 Bills/sec Bills / Transaction Up to 50 Bills / transaction Available Note Size Max 166mm *79mm / Min 120mm * 60mm Near-End Detection Supported (70 ~ 120 notes) Forgotten Retraction Supported External Shutter Step-motor method Double detection Ultrasonic Sensor Controller CPU ARM-7 Communication Interface RS-232C Async Power Supply DC5V, 24V Dimension Weight 278 (W) x319 (H) x532 (D)mm About 16Kg 1Cassette GK1500EX Specification sheet 5. Encryption Pin Pad ( EPP ) 2018-12 8 of 10 Item Spec. Remarks Overall Dimension 7.20(W) X 3.62(D) X 1.22 (H) inch 183 (W) X 92 (D) X 31 (H) mm Weight 1.10lbs 500g (Typ.) Input Voltage
+5V DC 5%
Currency 80mA Communication RS-232 (38400bps, 8Bit, Nonparty, BCC check) MAXQ1103 secure CPU Access 256kbytes of nonvolatile SRAM CPU for program and/or data storage Encryption using on chip 64/128/196bits key Certification Algorithm Battery Self Destruct Input (SDI) PCI3.0 certified. DES / TDES 3.6V / 1200mA for memory data retention power Data backup GK1500EX Specification sheet 2018-12 9 of 10 6. MS & IC CARD READER ( MCR+RF ) Item Spec. Remarks Card Format ISO 7810 MS Standard CIS NFC IC FEED SPEED Interface Type MS HEAD TRACK WIDTH SHUTTER INTERFACE Input voltage Weight Dimension ISO 7811(TRACK1,TRACK2,TRACK3) Read Capable Hico/Loco CapableF2F Reading Method 4,000,000 Pass Capable Canon MA06Z-X06 Mifare & ISO-14443A&B,FeliCa,ISO 18092 13.56MHz ISO/IEC 7816 EMV2000 ver.4.0 Contact Landing Type 450mm/sec 10%
RS232C Interface Read Track Width : 1.0 mm Write Track Width : 3.0 mm Option : Sensor Only(Not Used) Main Board : RS-232, CIS Board : USB 2.0(High Speed)
+24Vdc +-10%, 2A Ripple :
Less than 200m Vp-p ( 24V DC) 1.66kg W : 118 x H : 74.5 x L : 271.2 GK1500EX Specification sheet 2018-12 10 of 10 7. Bill Accepter Item Spec. Remarks Acceptance rate 98% or greater Notes up to 48notes, four ways, face up and down Note Insertion Note dimensions 62~83mm width 120 ~ 166mm length Transaction speed Approximately three seconds to stack Escrow One note Interfaces method RS232C Cashbox capacity 500/900/1200/2200 Weight Approximate 4Kg. GK1500EX Specification sheet 2018-12 11 of 10 8. LCD Item LCD Spec. Remarks Screen Size Resolution Active area Input Key 21.5 Wide TFT LCD 1920 * 1080 296.46(W) x 527.04(H)mm Capacitive multi touch Voice Guidance Voice assisted operation available through the headphone jack on the front bezel GK1500EX Specification sheet 2018-12 12 of 10 9. Power supply ( PSU : PSU-2100 ) Item Spec. Remarks Input Voltage 90~264VAC (Free voltage) Frequency 50/60Hz (47Hz ~ 63Hz) Input Current 2.8A Max.(100VAC) or 1.3A max. (240VAC)
(Output max. load) Efficiency 85% Over (Input: 110/220VAC, Output: Full load) Inrush current 40A max. (At cold start & 110VAC 60Hz) Total Watt Voltage 155.5W (Max) 5V 12V 24V Min: 0.5A Min: 0.0A Min: 0.0A Output Current Max: 3.5A Max: 1.5A Max: 5A Peak: 4.0A Peak:2.5A Peak: 10A Ripple Noise 50 100 120 240 240 480 Overall Dimension 161.6(W)X133.7(H)X 41(D) mm GK1500EX Specification sheet 2018-12 13 of 10 Parameter Spec. Remarks 26mm(H) * 73mm(L) * 51mm(W) Weight: 77g Iumination LED: 633mm Aimer LED: 528mm 844 * 640 pixels 65 45 Motion Tolerance Enhanced Steaming Presentation Trigger Up to 240 inches per second for 13mil UPC Symbol Contrast Grade 1.0(20% or greater) Voltage Requirements 4 ~ 5.5 VDC at input connector Current Draw @5VDC Scanning: 450mA, 2.3W Standy: 90Ma, 0.45W Power supply Noise Rejection Maxium 100Mv peak to peak, 10 to 100kHz Temperature Ranges:
Operating Storage Humidity Mechanical Drop ESD Tolerance
+32F to +104F(0C to 40C)
-4F to +158F(-20C to 70C) 5 to 95% non-condensing Operational after 30 drops from 4.9 feet
(1.5m) to concrete at 23C Up to 15kV direct air Up to 8kV indirect coupling plance Solids and Water Protection IP53 10. Barcode Dimensions Wavelength Image Size Skew Angle Pitch Angle GK1500EX Specification sheet 2018-12 14 of 10 11. Barcode Item Spec. Dimensions 150mm(H) * 85mm(W) * 145mm(D) Coin Payout Up to 8coins per second. Coin Dimension Range mm Diameter : 15 to 29.5mm Thickness : 1.25 to 3.2mm Operating environment 0 ~ 60, inside host machine Power Supply Voltage 12 24VDC +/-10%
Interface Parallel or Serial(ccTalk) Remarks GK1500EX Specification sheet 2018-12 15 of 10 12. US local contact information a. Main Tel.: (510) 344-6333 b. Tech. Support Tel: (510) 344-6344 c. Address: Genmega, Inc. 30587 Huntwood Ave Hayward, CA 94544