all | frequencies |
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual part 1of3 | Users Manual | 2.43 MiB | ||||
1 |
|
Users Manual part 2of3 | Users Manual | 2.43 MiB | ||||
1 |
|
Users Manual part 3of3 | Users Manual | 535.62 KiB | ||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Internal Photos | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | Users Manual part 1of3 | Users Manual | 2.43 MiB |
Geovision:
GV-Car d Reader Users Manual Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future us Cc GeoVision:
2017 GeoVision, Inc. All rights rese Under the copyright laws, this manual r without the written consent of GeoVisio Every effort has been made to ensure t accurate. GeoVision, Inc. makes no ex and assumes no responsibility for error for incidental or consequential damage:
or products contained herein. Features rved. nay not be copied, in whole or in part, n. hat the information in this manual is oressed or implied warranty of any kind s or omissions. No liability is assumed 5 arising from the use of the information and specifications are subject to change without notice. Note: No memory card slot or local sto:
GeoVision, Inc. QF, No. 246, Sec. 1, Neihu Rd., Neihu District, Taipei, Taiwan Tel: +886-2-8797-8377 Fax: +886-2-8797-8335 http://www.geovision.com.tw Irademarks used in this manual: GeoV series products are trademarks of Geo!
trademarks of Microsoft Corporation. September 2017 rage function for Argentina. ision, the GeoVision logo and GV
/ision, Inc. Windows is registered Pret Welcome to the GV-Card Reader User's Manu This Manual applies to the following GV-Card f GV-Reader1251 and 1352 V2 GV-SR1251 GV-RK1352 / R1352 Card Reader GV-DFR1352 (Rev. B) Federal Communication Commission Interference This equipment has been tested and found to com pursuant to Part 15 of the FCC Rules. These limits <
face al. Readers:
V1.0 Vi V1.2 VI2 Statement ply with the limits for a Class B digital device, ire designed to provide reasonable protection against narmrul interference in a residential install This equipment generates, uses and can radiate ra in accordance with the instructions, may cause har However, there is no guarantee that interference \
equipment does cause harmful interference to rad by turning the equipment off and on, the user is er of the following measures:
. Reorient or relocate the receiving antenna. Increase the separation between the equipment
. Connect the equipment into an outlet on a circuit connected. Consult the dealer or an experienced radio/TV tec FCC Cautiot 0 assure continued compliance, any Une pally FeEsponsidie Or COMpPilalce COUIG VOId Uh}
(Example - use only shielded interface cables wher This device complies with Part 15 of the FCC Rules. conditions:
(1) This device may not cause harmful interference received, including interference that may cause un ition. dio frequency energy and, if not installed and used mful interference to radio communications. vill not occur in a particular installation. If this io or television reception, which can be determined
\couraged to try to correct the interference by one and receiver. different from that to which the receiver is thnician for help. changes or modifications not expressly approved by SE USET S AULTIOTILY LO OPE Ale tills EQUIPMeEnt.
| connecting to computer or peripheral devices). Operation is subject to the following two
, and (2) This device must accept any interference desired operation. CONTONUS ..... 2. eeeee cece ee ee ee eeeeeeeeeeeeeeeeees Chapter 1 GV-Reader1251 / 1352 \
1.1 Packing List.......00.00 eee 1.2 Installation 1.2.1 Electric Wire . 1.2.2 Switch Setting of GV-Reader12 1.2.3 Defining the ID Number of GV-'
1.3 Connecting the Reader to GV-AS Cor 1.3.1 Connecting GV-AS Controller tl 1rough Wiegand Interface . 1.3.2 Connecting to GV-AS Controlle 1.3.3 Connecting to GV-DVR/NVR ar 1.4 Overlaying Card Numbers on GV-DVI 1.5 Changing the Default Settings of Bee 1.6 Specifications .......0.00.0 cee 1.6.1 The number of GV-Reader125/
Controllers... :
1.6.2 The number of GV-Reader 1352 Chanter 2? GV-RK1352? /R1352 / DI EE 2.1 Packing List 2.2 Physical Descriptions .............00.0002 2.2.1 Electric Wire... 2.2.2 Keypad (GV-RK1352 Only)..... 2.2.3 LED Indicator and Beeper 2.3 Connecting the Reader to GV-AS Cor 2.3.1 Connecting through Wiegand Ir r through RS-485 Interface . 6 1d Third-Party Access Controllers VNVR Live View ........... eee D der AN LED oo. ee eee eee VO
| / GV-SR1251 supported by GV-AS 2 V2 supported by GV-AS Controllers...........12
=-R13259 Card Reader. 14 15 MOND eee eee eee cece cece ceeeeeeeeteeeeeeeeeeee 1B MOTFACE eee eect cece tees ce te eee eeeeeeeeeeeee 1B 2.3.2 Connecting through RS-485 Int 2.3.3 Defining Readers on GV-AS Cc 2.4 Installing the GV-R/RK/DFR Config Al 2.5 Overlaying Card Numbers on GV-DVE 2.5.1 Defining the ID Number and Se 2.5.2 Adding the Reader to GV-DVR/
2.6 Changing the Default Settings of Beet 2.6.1 Setting up Beeper and LED on 2.6.2 Wiring the Beeper and LED to t 2.6.3 Configuring the Beeper and LE 2.7 Setting UID or GID on GV-R/RK/DFR 2.8 Firmware Upgrade..........0....:.0eee 2.9 Specifications ........0.0. eee 2.9.1 The Number of Readers Suppc D4AN Arrocenn, /M\/ PK12E9 and RV D4:
oI ees erface .. troller Web Interface. Pisnan ianee binant ctumdiatl ada an conwenadaasacainawell 22 V/NVR Live View ......... tting the Reader to Slave NVR. yer and LED GV-R/RK/DFR Config AP iESGVEAS Controle hitis:28 eR D Settings for Each Door/Gate....................4 29 MT i cst cate ndaccecse et lished obeetm 30 sos abet esate oun sa eaaousenResekaTaeebauadsenseeaaseearsuev 32 rted by GV-AS Controllers ...............:.0 34 2E9 Anh\ ar Chapter 1 GV-Reader1251 The GV-Reader1251 / 1352 V2 / SR1251 inclu It has both Wiegand and RS-485 outputs that control panel. The LED indicator is controllable green to indicate access granted. The GV-Rea controllable buzzer. 1.1 Packing List If any of the items are missing or damaged, co For GV-Reader 121 / 1352 V2 1. GV-Reader1251 / 1352 V2 2. Bag of screws 3. G\V-Reader Software CD 4
. Warranty Card
| GV-Reader1251 / 1352 V2 and GV-SR1251
/ 1352 V2 and GV-SR1251 des transmit-receive antenna and electronics. an be connected to any standard access by the host system and changes from red to der1251 / 1352 V2 / SR1251 also has a host-
ntact your dealer to arrange a replacement. For GV-SR1251 1. GV-SR1251 Screw x 6 Plastic Screw Anchor x 4 Plastic Case Warranty Card a F wn Cc GeoVision:
1.2 Installation 1.2.1 Electric Wire Red DC7.5~12V Black GND Green Wiegand Data 0 White Wiegand Data 1 Blue RS-485 +
Light Blue RS-485 -
Yellow Beeper Orange Green LED Light Red Red LED 1.2.2 Switch Setting of GV-Reade!
1251/1352 V2 Electr Wire ECE annann Switch Default settings are all ON.
= = =SW 1 Beeper Control: The default mode When the setting is On, the Reader is sc is Off, the Beeper is controlled externally to activate the beeper. ic for the Beeper Control is the internal control. unded after a card is read. When the setting
. You can use the external beeper control line SW2-SW3 Green/Red LED Control: The is the internal control. The LED is normall green. When the setting is Off, the Gree external control lines can then be used to SW4 Master/Slave: The switch is used to When the setting is On, the Reader is cc ic Off the Reader ic for RS-485 ciqnal SW5-SW7 ID Setting: Switch 5 to switch connection. ID 0 1 2 3 SW5 OFF |OFF |OFF |O SwW6 OFF |OFF |ON Oo SW7 OFF | ON OFF |O SW8 RS-485 Terminal Resistor: When t connected between RS-485+ and RS-485 multiple RS-485 devices are connected to Note: After changing the din ewitc!
GV-Reader1251 / 1352 V2 and GV-SR1251 default mode for the Green/Red LED Control y red. When a card is read, the LED flashes n/Red LED is controlled externally. The operate the LEDs. select the Readers communication interface. trolled by Wiegand signal. When the setting 7 is used to set the Reader's ID during a chain 4 5 6 7 a ON ON ON ON N OFF |OFF |ON ON N OFF | ON OFF | ON he setting is On, a 120-ohm resistor is
-. This setting is used in the last device when gether. he unit mist he recet hv nowering down then C GeoVision:
1.2.3 Defining the ID Number of G Reader Config Utility Through a single RS-485 cable, you can conne
$SR1251 to the GV-ASController. To form a che them CV Carn ono pain anon prniilijie then HES, come erenticenee home SOUT PEGS! OTM TIMING MY Melly tie Vv 1. Install and download the GV-Reader Config GV-R/RK/DFR Config AP. 2. Run GV-R/RK/DFR Config AP. 1A GV-R/RK/DER Series - |) x!) GV-R/RK/JDFR Setup AP V1.20
OgenCOM | Clase COM Serial ID [00 Version [v7 T Beeper [ GeenLED [ RedLED
(User'Wite Control / Software Control) Master / Slave V-SR1251 by Using the GV-
ct up to 8 GV-Reader1251 / 1352 V2 /
in connection, follow the steps below to define
.) Hy Mey
) Utility. For details, refer to 2.4 Installing the
[Master i Geer ID Number pd I Only Read GID Setup _|
. Select the COM port that is connected to tr square next to the COM port box should ch correct. Select an ID number for the reader. The IL
. Click Setup. The serial number and firmwa dotartand The caotinne aro cant in the raad, mM EE een ie Sie eee eee Note:
1. To define the ID number of GV-Reader12:
the back of the reader. 2. The GV-SR1251 only reads UID. Therefo!
R/RK/DFR Series dialog box is not functio je reader and click Open COM. The red ange to blue to indicate the COM port is
) number ranges from 0 to 7. re version of the reader will be automatically a 51 / 1352 V2, you must use the switches at e, the Only Read GID option in the GV-
nal for GV-SR1251. 1.3 Connecting the Reader to The GV-Reader1251 / 1352 V2 / SR1251 is co The following diagrams illustrate how to conne GV-AS Controller through Wiegand interface o GV-Reader1251 / 1352 V2 / SR1251 to third-p:
For GV-Reader1251 / 1352 V2, after you wire 1 access controller, ensure the related switch set configured correctly. Note: Each reader consumes 60 mA of powe devices and readers connected to the GV-AS
/ 2110/2120), 3.5A (for GV-AS410 / 4110) of external power supply if the power supplied fr 1.3.1 Connecting GV-AS Controlle
| GV-Reader1251 / 1352 V2 and GV-SR1251 GV-AS Controller mpatible with any standard access controllers. ct the GV-Reader1251 / 1352 V2/ SR1251 to r RS-485 interface, and how to connect the arty access controllers and GV-DVR/NVR. he connection between the reader and the ting on the GV-Reader1251 / 1352 V2 is r. The total power consumption of the output Controller must be under 3A (for GV-AS210 5A (for GV-AS810 / 8110). Connect an om GV-AS Controller is insufficient. 1r through Wiegand Interface BZ RL GL D1 DO 12V GV-AS Controller Qwitch Catting for \/ianand Cannaearctinn (C 12 3 4 SW4 must b memes (Black)
~~ (Yellow)
= (Light red)
=== (Orange) ee (White)
= (Green) MU
(Red) GV-Reader
\/_Readar19A1 / 1259 V9 nnly) NOE EEE EE EAE an e turned ON. e a. C GeoVision:
1.3.2 Connecting to GV-AS Contr GND Le | ww GV-AS Controller e Switch Setting for RS-485 Connection (GV SW4 must be turned OI e Switch Setting for Connecting Multiple GV-
V9 only) yller through RS-485 Interface
= (Black) reSTN CT
= (Light blue) same (Blue) GV-Reader
-Reader1251 / 1352 V2 only) CE Readers (RS-485) (GV-Reader1251 / 1352 Multiple readers can be connected to the cable. When you connect more than one last connected GV-Reader turn SW8 to Ol with SW5 to SW7 first. aaa ee:
p23s4ssis 3-46) 6-7-8 GV-Reader 1 e 1D Number Setting for Connecting Multiple Multiple readers can be connected to the cable. To define the ID of each GV-SR125 SR1251 by Using the GV-Reader Config L 3V-AS Controller through a single RS-485 3\V-Reader to the GV-AS Controller, on the
\. Make sure to define the ID of each reader AeWGEEA reewe! 42345 67 GV-Reader 8 GV-Readers (RS-485) (GV-SR1251 only) 3V-AS Controller through a single RS-485 1, see 1.2.3 Defining the ID Number of GV-
tility. Defining Readers on GV-AS Controller V After configuring the switch settings of GV-Ree of GV-SR1251 with the GV-Reader Config Utili reader controls on the Web interface of the GV 1. Type the GV-AS Controller's IP address in 2. Type the username and password to login. 3. Inthe left menu, click Extended Reader. T AS210 Extended Reader Configuration GV-Reader/CR420/GF1921/GF1922 Function RS485 Serial Number gooaoaaa
IDO D4 ID2 ID3 D4 IDS Function
[Doortate 1 Entry NoFuncion NoFuncion
[NoFunction v No Function
[NoFuncten i ws wees KoPucton ee GV-Reader1251 / 1352 V2 and GV-SR1251 Veb Interface der1251 / 1352 V2 or defining the ID number ty, you need to specify which door each
-AS Controller. the Web browser. his page appears. Connection Status us ume LO GeoFinger Server IP Address| 192 || 168 |/ 0 || 1 |:| 21 GF1901/GF1902/GF1911/GF1912 Function RS485 Serial Number Function o (NoFunction o [NoFuncton v If the readers are connected using RS-485 number. The ID number must match the ID Reader1251 / 1352 V2) or GV-R/RK/DFR (
Leave the serial number field blank. 6. select a door/gate for the reader under Ful 37 | (from 1025 to 65535) Connection Status select the RS485 checkbox in front of the ID you configured using SW5 SW7 (for GV-
sonfig AP (for GV-SR1251). iction. Click Submit. e a. C GeoVision:
1.3.3 Connecting to GV-DVR/NVR Controllers GV-Reader1251 / 1352 V2 / SR1251 is also cc With its compatibility, you can also add a GV-L management. After connecting the GV-Reader1251 / 1352 V:
the Wiegand interface, connect the reader to tt GV-NET/IO Card V3.1. Note: The GV-Reader1251 / 1352 V2 / SR12 and the GV-NET/IO Card of versions earlier tl anes (Green) a and Third-Party Access mpatible with third-party access controllers. VR/NVR to this connection to empower your 2 / SR1251 to the access controller through 1e GV-DVR/NVR via GV-COM, GV-Hub or 51 is not compatible with the GV-NET Card van V3. GV-COM / GV-Hub /
GV-NETIIO Card V3.1 Rey ak
(power supply: 7.5~12 V) | white) GV-Reade GV-Syst e Switch Setting (GV-Reader1251 / 1352 V2
| oe em oe eae wa SW4 must be turned OFF
(Light blue) -
em only) 1.4 Overlaying Card Numbers You can overlay card numbers recognized at tl camera channel on GV-DVR/NVR. To overlay reader needs to be connected to a GV-DVR/N'
Card V3.1. For details, refer to 2.5 Overlaying |
(Blue) RS-485 +
(Light Blue) RS-485 -
GV-Reader1251 /
1352 V2/SR1251 GV-
Note:
1. For GV-Reader1251 / 1352 V2, make sur to slave by configuring the switch settings GV-Reader1251 / 1352 V2. 9 For GV-SR1951 make cure to define the
| GV-Reader1251 / 1352 V2 and GV-SR1251
/on GV-DVR/NVR Live View 1e GV-Reader1251 / 1352 V2 / SR1251 onto a card numbers on GV-DVR/NVR channel, the
/R through GV-COM, GV-Hub or GV-NET/IO Card Numbers on GV-DVR/NVR Live View. UB / GV-COM / GV-DVR/NVR NET/IO Card
> to define the ID number and set the reader _ For details, refer to 1.2.2 Switch Setting of ID number and cet the reader to clave with the GV-Reader Config Utility. For details, Setting the Reader to Slave. refer to 2.5.1 Defining the ID cumber and C GeoVision:
1.5 Changing the Default Sett You can change the default settings of the LEL 2110 / 2120 / 410 / 4110/ 810 / 8110 to extern Web interface of the controller, you can set the or beeper when the specified alarm events occ 1. For GV-SR1251, enable external control of GV-R/RK/DFR Config AP. For details, refe R/RK/DFR Config AP. For GV-Reader1251 / 1352 V2, enable ext by configuring the switch settings. For deta Wire the Beeper, Red LED and Green LED details, refer to 2.6.2 Wiring the Beeper an Specify the Beeper and LED settings for e<
Controller. For details, refer to 2.6.3 Confic Door/Gate. ings of Beeper and LED
) and the beeper by enabling a GV-AS210/
ally control the LED and Beeper. Through the controller to trigger the red LED, green LED ur. the readers Beeper and LED by using the r to 2.6.1 Setting up Beeper and LED on GV-
2rnal control of the readers Beeper and LED ils, refer to 1.2.2 Switch Setting. from the reader to the GV-AS Controller. For d LED to the GV-AS Controller. ich door through the Web interface of GV-AS yuring the Beeper and LED Settings for Each 10 1.6 Specifications GV-Reader1251 CPU Wiegan Wiegand Interface Distance 30 n GV-AS210 Distance 100 r GV-AS2110 / 2 Power Source Power Consumption LED Red, Green LED Beeper 125 GV-Reader1251 / 1352 V2 and GV-SR1251 8-bit microprocessor d 26 bits, 1 (98.43 ft) with Wiegand 26 / 34 1410/ 810, bits, distance 30 m n (328.1 ft) with (98.43 ft) 1201 4110/8110 DC 7.5~12V 60 mA Red, Green, Blue LED | Red, Green LED Buzzer 13.56 MHz for KHz 1S014443A Proeyteory
(Proximity 9,600 bps, connec RS-485 GV-Reader1251 / GV. GV Color Operating Temperature -35 Operating Humidity 10 ~
Dimensions 75 (W) x 115 (H)
(WxHxD) AAAI. Ac 150 g/ 0.33 Ib
/ EM Card) (Mifare Class ) t up to 8 GeoVision readers (GV-CR420 /
-SR1251 / GV-Reader1352 V2 / GV-R1352 /
-RK1352 / GV-DFR1352) Gray C ~ 65 C (-31 F ~ 149 F) 90% RH (non-condensing) x 15 (T) mm, with enclosure 35 (T) mm pee ag og na pT AV-O LETT, WUT CHIRIVOUTe 1.00 LI) HT 125 g/ 0.27 Ib 150 g / 0.33 Ib IP66 IP54 CE, FCC, RoHS 11 C GeoVision:
1.6.1 The number of GV-Reader12 AS Controllers GV-AS100 Not :
GV-AS110 / 120 Not s GV-AS1010 Not :
GV-AS1110 Not :
GV-AS100 / 110 / 120 with GV-ASBox | Not :
GV-AS100 / 110 / 120 with GV-ASNet | Not :
GV-AS210 / 2110 / 2120 4 GV-AS410 / 4110 8 GV-AS810 / 8110 8 GV-EV48 Not :
GV-CS1320 Not s 51 / GV-SR1251 supported by GV-
supported Not supported supported Not supported supported Not supported supported Not supported supported Not supported supported Not supported 8 8 16 supported 2 supported 2 1.6.2 The number of GV-Reader 13 Controllers GV-AS100 1 GV-AS110 / 120 1 GV-AS1010 Not GV-AS1110 Not GV-AS100 / 110 / 120 with GV-ASBox | 2 GV-AS100 / 110 / 120 with GV-ASNet | Not GV-AS210 / 2110 / 2120 4 GV-AS410 / 4110 8 GV-AS810 / 8110 8 GV-EV48 Not GV-CS1320 Not 12 52 V2 supported by GV-AS 1 Not supported supported 2 supported Not supported 4 supported 2 8 8 16 supported 2 supported 2 C GeoVision:
Chapter 2 GV-RK1352/ R1 Reader GV-RK1352 / R1352 / DFR1352 are card read:
GV-RK1352 comes with keypad, allowing it to |
designed to be installed on the door frame. Featured with the Wiegand and RS-485 output standard access control panel. The readers are compliant housing for outdoor use. 352 / DFR1352 Card ers capable of recognizing identification cards. also recognize PIN codes. GV-DFR1352 is Ss, the readers can be connected to any
> protected by a weather sealed and IP66 C GeoVision:
2.1 Packing List GV-RK1352 1. GV-RK1 2. Screw x 3. ScrewA GV-R1352 Front Cc
. Software Installati
. Warrant
- GV-R13:
2. Screw x 352 Card Reader 2 nchor x 2 ver Fiate X 1
-CD on Guide y Card 52 Card Reader GV-DFR1352 N Qa w Screw A Security Software Installati Warrant) GV-DFR 2. Screw x Screw A 44 Noose Front Cc Software Installati Warrant) nchor x 2 Torx
-CD on Guide y Card 1352 Card Reader 2 nchor x 2 ver Plate x 2
-CD on Guide y Card Bi. 2.2 Physical Descriptions 2.2.1 Electric Wire GV-RK1352 Red DC7.5~12V Black GND Yellow Beeper Orange Green LED Light Red Red LED Green Wiegand Data 0 White Wiegand Data 1 Blue RS-485 +
Light Blue RS-485 -
GV-R1352
| Wire Color Function 3V-RK1352 / R1352 / DFR1352 Card Reader
\__ Rear View Red DC 7.5 ~ 12V Black GND Yellow Beeper Orange Green LED Light Red Red LED Green Wiegand Data 0 White Wiegand Data 1 Blue RS-485 +
Light Blue RS-485 -
Gray N/A Purple N/A Brown N/A Rear View 15 C GeoVision:
GV-DFR1352 Red DC 7.5 ~ 12V Black GND Yellow Beeper Orange Green LED Light Red Red LED Green Wiegand Data 0 White Wiegand Data 1 Blue RS-485 +
Light Blue RS-485 -
Gray N/A Purple N/A Brown N/A Install the GV-DFR1352 to the door frame usin Before placing and sticking the front cover plat Cover to prevent scratches to the cover after ir Rear View g the supplied screws and screw anchors. e to the GV-DFR1352, remove the Plastic stalled. Screw Screw Front Cover Plate GV-DFR1352 16
-lastic Cover
1 | Users Manual part 2of3 | Users Manual | 2.43 MiB |
Bi. 2.2.2 Keypad (GV-RK1352 Only) When accessing an entry using GV-RK1352, y keypad or present the card and then enter the access. The access mode is defined on GV-AS 1. 0~9 Number Keys: Press the number keys 2. # Key: Press the # key to confirm the PIN 3. + Key: Press the * key to cancel the PIN 2.2.3 LED Indicator and Beeper In standby mode, the LED is blue. When a car beeper beeps once. The reader comes with external control wires f connect these control wires to a GV-AS Contre 3V-RK1352 / R1352 / DFR1352 Card Reader ou can enter the doors PIN code on the card's PIN code on the keypad to be granted 3Manager. 5 to enter the PIN code. ode. ode. 1 is read, the LED flashes green and the or Green LED, Red LED and Beeper. You can ller to change the default settings of the LED and Beeper. For details on how to configure th of Beeper and LED later in this installation guic Note: You can only connect the LED and bee 4110 / 810/ 8110. e settings, refer to 2.6 Changing the Settings le. per wires to GV-AS210 / 2110 / 2120/ 410/
17 C GeoVision:
2.3 Connecting the Reader to You can connect the readers to GV-AS Contro Note that the connection between the reader a controller models. To see how many readers c to 2.9.1 The Number of Readers Supported by Note:
1. GV-RK1352 / R1352 / DFR1352 is comp
/2110/2120/410/4110/ 810/ 8110. F GV-RK1352, you can only connect GV-F following interfaces. e GV-AS100/ 110/ 120: through Wieg:
e GV-AS1010: through RS-485 interfac e GV-AS210/2110/2120/410/ 4110 interface Crakk CV DY49R) 104969 / NODA) ~-
KGET Na VETNIN POE TEN POE I LAN EN POE ON eg co a GV-AS Controller llers through Wiegand or RS-485 interface. nd GV-AS Controller varies with different an be connected to a GV-AS Controller, refer GV-AS Controllers. atible with GV-AS100 / 1010 / 110/120 / 210 jowever, to enable the keypad function on K1352 to the controllers through the and interface e
/ 810 / 8110: through Wiegand or RS-485 an mA nf nmuine The tatal mmr PIOUS UE PN MT PUT. PEI RU cn MMEDOMETIMUIMTE AT LEIS MMP UME Meee a TS must be under 3A (for GV-AS210 / 2110
(for GV-AS810 / 8110). Connect an exte:
GV-AS Controller is insufficient. 2.3.1 Connecting through Wiegan The following diagrams use GV-RK1352 and eight readers can be connected to GV-AS810 |
interface. GV-AS810 Controller ov Note: Connection through Wiegand interface 18 6 OMIT MIETTINEN TEE ATI
/ 2120), 3.5A (for GV-AS410 / 4110) or 5A nal power supply if the power supplied from d Interface 3V-AS810 Controller as an example. Up to Controller through the controller's Wiegand Black GND White Wiegand Data 1 Green Wiegand Data 0 2K1352 Red DC 7.5 ~ 12V
/-R1352 is not supported for GV-AS1010. Bi. 2.3.2 Connecting through RS-485 The following diagrams use GV-RK1352 and eight readers can be connected together to the e Connecting four or less readers to GV-ASE GV-RK1. _ (lak)
(Light Blue) le)
(Red) GV-AS810 Controller Reader 1 e Connecting five or more readers to GV-AS For readers five to eight, connect the RS~/
AS810 Controller and then connect the 12 12V DC power output on the controller. 3V-RK1352 / R1352 / DFR1352 Card Reader Interface 3V-AS810 Controller as an example. Up to
: RS-485 interface on GV-AS810 Controller. 510 Controller:
352 or GV-R1352 Reader 4 810 Controller:
se oon Black Light Blue Blue RS-485 +
Red DC 7.5 ~ 12V 185 cable to the RS-485 interface on GV-
V power output and GND of the reader to a GV-AS810 Controller a
(Red) (Black) ack) ht Blue) ue) sd) Readers 1-4 seereeees Readers 9-8 GV-RK1352 or GV-R1352 19 C GeoVision:
2.3.3 Defining Readers on GV-AS Since multiple readers can connect to GV-AS (
need to specify which door each reader contro!
on the Web interface of GV-AS Controller. On|
to read the GID or UID on GV-AS ID Cards / K geen mt CVU AC Panteeling mndnie uarine MISTS YEN er MMC VAG. 1. On the controller's Web interface, click Ext Firmware Update eC GeoVision:
Basic Setting Network Setting Other Setting Account Setting Advanced Setting Function Setting AS210 Extended Rez GV-Reader/CR420/GF192 RS485 Serial Numbe IDO 1D4 a ID2 ID3 ID4 100aa0 coon Ing a OP APalberer rarer
@ Parameter Part?
Ine!
Controller Web Interface controller using one RS-485 interface, you Is. This section explains how to define readers the Web interface, you can also set the reader ey Fobs. Note that the Web interface of ended Reader. This dialog box appears. der Configuration 1/GF 1922 Function
: Function Connection Status 18708 DooekGate | Enty ]
_ | [NeFonction NoFunction |
No Fonction |
WoFmcin 9)
= _ CO yo Bone zi
* Time Setting Oo wr
* Input Setting
* Output Setting Read Mode; Read UID |
* Wiegand Setting GeoFinger Server IP Add Extended Device GF1901/GF1902/GF 1911/
Extended Reader RS485 Serial Number Oo
* Tailgating Setting 2. In the GV-Reader/CR420/GF1921/GF1922 the ID number and type the Serial Number number will be assigned to the reader. ev-riss2 Ov OV:
3. Select a door/gate for the reader from the F 20 ess| 190 |[ 168 | 0 | 1 |:/ 2167 | (from 1026 to 65535)
$F1912 Function Function Connection Status NoFunction section, select the RS485 checkbox in front of ron the rear panel of the reader. The ID unction drop-down list. Bi. 4. Next to Read Mode, select Read UID or Ri UID (unique identifier) or GID (GeoVision II If you select Read GID, make sure there al Fobs as shown below. If there is only one r GID is not supported, and you must select UID 1400111C 138 08572 5. Click Submit. Note:
1. When you click Submit on the Extended 2120 / 410 / 4110 / 810 / 8110, all reader reboot. 3V-RK1352 / R1352 / DFR1352 Card Reader ead GID to set the connected readers to read
)) on GV-AS ID Cards / Key Fobs. e two numbers on your GV-AS ID Cards / Key lumber on your GV-AS ID Cards / Key Fobs, Unique Identification (UID). Reader page of a GV-AS1010 / 210 / 2110/
's connected through RS-485 interface will 2. GID ID format is only supported in GV-R V1.2 or later. 3. If you are using third-party cards or key f K1352 / GV-R1352 / GV-DFR1352 (Rev. B) obs, you must set the reader to read UID. 21 C GeoVision:
2.4 Installing the GV-R/RK/DF The GV-R/RK/DFR Config AP allows you to se master / slave status, and whether it reads UIL reader needs to be connected to a PC through RS-485
(Blue) RS-485 +
(Light Blue) RS-485- ||
GV-RK1352 GV-H GV. You can install the Config AP from the Softwar COM, GV-Hub or GV-NET/IO Card V3.1, you Driver. Installing from Software CD Tt. HSer te SOMWare OV alla We Iistall FrOg!
R Config AP t the readers beeper / LED, ID number,
) or GID. When using the Config AP, the GV-COM, GV-Hub or GV-NET/IO Card V3.1. RS-232 J UB / GV-COM / PC NET/IO Card e DVD or GeoVision Website. To use a GV-
ilso need to install GeoVision USB Device Ill WINGOW Will POp Up automatically. 2. Select Install GeoVision USB Device Dri 3. In the GeoVision USB Driver Installer wind 4. Go back to the Install Program window, an Downloading from GeoVision Website 1. Go to the Software Download and Upgradii http:/Awww.geovision.com.tw/english/5 8 /
2. Select GV-Reader from the drop-down list, GV-RK1352 & GV-R1352 & GV-DFR1352 GVGFIOOL & 1902 Firmware Upgrade UCIIty Upgrades firmware for GV-GF1901 and GV-GF1902 Fin:
GV-RK1352 & GV-R1352 & GV-DFR1352 Config U Defines the ID numbers of the multiple readers conne
[tr etre mss GV-RK1352 & GV-R1352 & GV-DFR1352 Firmwar Upgrades the firmware of GV-RK1352 & GV-R1352 &
3. Select Driver from the drop-down list and c USB Device Driver. fer. ow that appears, select Install. 1 select Run GV-Reader Config Utility. 1g page of GeoVision Website:
\S.asp and click the Download icon #222") of Config Utility. jerprint Readers. tility ted. 2 Upgrade Utility jV-DFR1352. lick the Download icon B= 22]
of GV-
Bi. 2.5 Overlaying Card Numbers You can overlay card numbers recognized at tl DVR/NVR. To overlay card numbers on GV-D\
connected to a GV-DVR/NVR through GV-COI Glgmm so
(Blue) RS-485 +
(Light Blue) RS-485- || J GV-RK1352 GV-H or GV-R1352 Gv. Note: GV-RK1352 / R1352 / DFR1352 is not NET/IO Card of versions earlier than V3. 2.5.1 Defining the ID Number and 3V-RK1352 / R1352 / DFR1352 Card Reader
/on GV-DVR/NVR Live View 1e reader onto a camera channel on GV-
/R/NVR channel, the reader needs to be M, GV-Hub or GV-NET/IO Card V3.1. RS-232 Fe UB / GV-COM / GV-System NET/1O Card compatible with GV-NET Card and GV-
Setting the Reader to Slave After the reader is connected to the computer Config AP to define the ID number of the read 1. Run GV-R/RK/DFR Config AP. Refer to 2. above for how to install.
GV-R/RK/DFR Setup AP coms =I Open COM | Close COM Serial ID Version {1.20 T Beeper [~ GreenLED [~ Red LED
(User Wire Control / Software Control) Master / Slave Slave 1D Number 0 S
[ Only Read GID Clear af the GV-DVR/NVR, use the GV-R/RK/DFR er and set the reader to Slave. 4. Installing the GV-R/RK/DFR Config AP 23 C GeoVision:
2. Select the COM port that is connected to tr square next to the COM port box should ch correct. 3. Under Master / Slave, set the reader to Sl 4. Select an ID number for the reader. The IL 5. Click Setup. The settings are sent to the re of the reader will be automatically detected If you want to connect multiple readers to the number for each reader. For this you need to c reader at a time, and follow the instructions ab Note:
1. If the COM port is incorrect, an Error ope verify the COM port that is connected to tt the Ports (COM & 1 PT) field vou should Camm Part and the COM nimmher curren e reader and click Open COM. The red ange to blue to indicate the COM port is ave.
) number ranges from 0 to 7. ader. The serial number and firmware version 5V-DVR/NVR, you need to set up a unique ID onnect each reader to the computer one ove to set up an ID number. 2ning serial port message will appear. To 1e reader, go to Windows Device Manager. In e the entry for Prolific UJSB-to-Serial Hy in wea iY Ports (COM & LPT) wg Communications Port (COM1) 29 ECP Printer Port (LPT1) iF If you are using an older version of the Co serial number of the reader. The serial nui Wa nfig AP, you will have to manually type the mber is on the rear panel of the reader. Bi. 2.5.2 Adding the Reader to GV-DV 1. In GV-DVRINVR, click the Configure buttc Wiegand Capture Device Setting. This di GV-Wiegand Capture Setup Device Setting | Code Format Setting | Database Setting |
Delete Mappir 2. Click the New button. This dialog box appe 3V-RK1352 / R1352 / DFR1352 Card Reader R/NVR in, select Accessories, and select GV alog box appears.
g Cam. Device Setting Type Device COM Address Camera GV-Wiegand Capture i 2 +} | GVWT2
[com 4 |
1 +
Camera 1 +
Type: Select GV-Wiegand Capture. Device: Type a number and name to h COM: Select the COM port connected t Address: Select the ID of the connecte Camera: Assign the reader to a channe
. Click the Add button.
>Ip you identify the reader. o the reader. d reader you set in GV-R/RK/DFR Config AP.
| to overlay card numbers on the live view. 25 C GeoVision:
2.6 Changing the Default Sett You can change the default settings of the LEL 2110 / 2120 / 410 / 4110/ 810 / 8110 to extern Web interface of the controller, you can set the or beeper when the specified alarm events occ 1. Enable external control of the reader's Bee Config AP. 2. Wire the Beeper, Red LED and Green LED 3. Specify the Beeper and LED settings for e<
Controller. 2.6.1 Setting up Beeper and LED To enable the external controls of the Beeper <
reader neede tn he connected tn a comni iter th
\o4 ings of Beeper and LED
) and the beeper by enabling a GV-AS210/
ally control the LED and Beeper. Through the controller to trigger the red LED, green LED ur. per and LED by using the GV-R/RK/DFR from the reader to the GV-AS Controller. ich door through the Web interface of GV-AS 9n GV-R/RK/DFR Config AP ind LED on GV-R/RK/DFR Config AP, the roniqh GV_COM GV_Hith or GV_NET/IO Card RS-485 ie (Blue) RS-485 +
(Light Blue) RS-485- |]
GV-RK1352 GV-H GV. 1. Start the GV-R/RK/DFR Config AP and se reader. Note: To see how to install the Config AP anc refer to 2.4 Installing GV-R/RK/DFR Contig A Setting the Reader to Slave earlier in this inst 26 RS-232 UB / GV-COM / PC NET/IO Card lect the COM port that is connected to the
| how to identify the COM port of the reader, P and 2.5.1 Defining the ID Number and allation guide 2. Click Open COM. GV-R/RK/DFR Setup AP V1.20 COMS +
Open COM Close COM Serial ID 100001 3269455 Version {V1.20
[ Beeper [~ GreenLED [~ RedLED
(User Wire Control / Software Control}
Master / Slave Slave i ID Number
[ Only Read GID Clear 3. To enable external control of Beeper or LE 4. Select Master from the Master / Slave dror 3V-RK1352 / R1352 / DFR1352 Card Reader D, select Beeper, Green LED or Red LED.
-down list. 5. Select an ID number for the reader. Make s the ID number set on the Extended Reader 6. Click Setup. The settings are sent to the re version of the reader will be automatically c If you want to set up multiple readers to be con each reader to the computer one reader at a tit enable external control. After the above settings. vou need to connect t from the reader to the outputs of GV-AS Contr sure the ID number on the Config AP matches page of the GV-AS Controller Web interface. ader. The serial number and the firmware letected. trolled by the controller, you need to connect ne, and follow the above instructions to he Beeper. Red LED and Green LED wires oiler. oT C GeoVision:
2.6.2 Wiring the Beeper and LED t To wire the beeper and LED to GV-AS210/ 21 the control wires of the reader's Beeper, Red L GV-AS Controller. Ny eeM VEN MEE The diagram below shows the connection for w AS810 as an example. For Red LED, use the |
hor GV-AS810 Controller Wiring Beeper to GV-AS Controller o the GV-AS Controller 10/2120 / 410 /4110/ 810/ 8110, connect ED or Green LED to any of the outputs on
/iring Green LED using GV-RK1352 and GV-
ght red wire instead. econ | Wire Color | Function Black GND
(Black)
(Whitey Orange Green LED
(Green) LightRed | Red LED
(Red) GV-RK1352 or GV-R1352 The diagram below shows the connection for v AS810 as an example. GV-AS810 Controller 8 firing the beeper using GV-RK1352 and GV-
an Wire Color | Function Black GND
=< (Black)
(Black) Yellow Beeper
(White)
(Green)
(Red) GV-RK1352 or GV-R1352 Bi. After wiring, you also need to go to GV-ASMan off the readers beeper. In GV-ASManager, rig!
click Settings, and click the Door / Gate tab tc Alarm Event Camer Held Open Hae Forced Open iG Tamper Secor urea TT M] Access Denied L
(Tailgating Alarm Continuous Time :
5 Sec{1~10) 2.6.3 Configuring the Beeper and After connecting the wires for beeper or LED, s LED on the GV-AS210 / 2110 / 2120/ 410/41 1. On the controller Web interface. click Outp 3V-RK1352 / R1352 / DFR1352 Card Reader ager to select the alarm conditions that will set it-click the GV-AS Controller in the device list, select the alarm conditions.
| Mapping amera, F 2, Camera 1 ol id Camera LED Settings for Each Door/Gate specify the conditions to trigger the beeper and 10 / 810 / 8110 Web interface. ut Setting. The page below appears. AS210 Output Configuration Output Function AS210_Outt
[Door1 || [Electric Lock |v AS210_ OQ sz |
[Door 1 \)]
[Access Denied |v]
2. Find the output wired to the beeper or LED the beeper or LED. a. Output Type: Select Normal, Toggle the number of seconds to trigger the k b. Output Conditions: Select the door <
or LED. Up to 2 sets of output conditic
. Click Submit. oy) Ler AND [] [None Fire Alarm AND []] [None and specify up to 2 alarm conditions to set off or Pulse. If you select Pulse, you can specify eeper or LED. ind the alarm conditions to trigger the beeper ns can be set. 29 C GeoVision:
2.7 Setting UID or GID on GV-
By default, the readers read the UID (unique id R/RK/DFR Config AP, you can set the GV-RK
(GeoVision ID) on GV-AS ID Cards / Key Fobs Note:
1. To see how to install the Config AP and |
refer to 2.4 Installing GV-R/RK/DFR Con Setting the Reader to Slave. 2. GID ID format is only supported in GV-R V1.2 or later. 3. If you are using third-party cards or key f 1. Run GV-R/RK/DFR Config AP. R/RK/DFR Config AP entifier) on ID cards or key fobs. Using GV-
352 / R1352 / DFR1352 to read GID instead. now to identify the COM port of the reader, fig AP and 2.5.1 Defining the |D Number and K1352 / GV-R1352 / GV-DFR1352 (Rev. B) obs, you must set the reader to read UID. GV-R/RK/DFR Setup AP V1.20
Open COM Close CO!
Serial ID Version
\ Beeper | GreenLED [~ RedLED
(User Wire Control / Software Control) Master / Slave Master zl] Clear ID Number 7 30
| Only Read GID Setup Select the COM port that is connected to tt square next to the COM port box should ch correct. To set the reader to read GID, select Only e reader and click Open COM. The red ange to blue to indicate the COM port is Read GID. Bi. 4. Click Setup to apply the setting. The serial will be automatically detected. To use GID, make sure there are two numbers shown below. If there is only one number on yc supported and you must select Unique Identific 1400111C 3V-RK1352 / R1352 / DFR1352 Card Reader number and firmware version of the reader on your GV-AS ID Cards / Key Fobs as yur GV-AS ID Cards / Key Fobs, GID is not ation (UID). 31
1 | Users Manual part 3of3 | Users Manual | 535.62 KiB |
C GeoVision:
2.8 Firmware Upgrade GeoVision will periodically release the updated can be simply loaded into the reader by using |
Important Notes before You Start Before you start updating the firmware, please 1. While the firmware is being updated, the px 2. Do not turn the power off within 10 minutes WARNING: The interruption of power supply |
failures but also damages to the device. In thi representative and send your device back to To upgrade firmware:
1. Insert the Software CD and select Run Fir annears_ i firmware on the website. The new firmware Jpdate Utility included in the Software CD. read these important notes:
wer supply must not be interrupted. after the firmware is updated. during updating causes not only update Ss case, please contact your sales SeoVision for repair. nware Update Utility. This dialog box
- YN Aamo e ret MTC weaken) Select the COM port of the reader. Click the Browse button to locate the firmv Click Update. whoeoIecn Ye. THe LED HMI! SHUUIN Haoll PUlVie UU the process is complete, the reader will be change to green. Note: You can also download the firmware ur http:/www.geovision.com.tw/english/5_8_AS. list, click the Download icon *
Firmware Upgrade Utility. 32 are file (.bin) saved at your local computer.
IY HIE PIUCE SS UE TTTTIWale UPDYIGUIIY. VWI sounded twice and the LED indicator will grade utility from the GeoVision website:
asp. Select GV-Reader from the drop-down V-RK1352 & GV-R1352 & GV-DFR1352 Bi. 2.9 Specifications 8-bit microprocessor 13.56 MHz for 1SO1444 Class
\Wlianand 24 / 2A hit Aic oe arr 85 C min 9,600 bps, connect up 1 GV-Reader1251 / GV-s ase GV-RK1352 / GV-DFR Distance 600 m (1968.!
7.5V DC~12V DC, 2001 Red, Green and Blue L Wiegand Interface Supported ID Reade GID and UID 3V-RK1352 / R1352 / DFR1352 Card Reader 3A (Mifare DESFire, Mifare Plus and Mifare tanroa 1NN Mm (292 1#t\ DOA AVR 12\/ NC min a OEE ee EE ee eo
(0 8 GeoVision readers (GV-CR420 /
3R1251 / GV-Reader1352 V2 / GV-R1352 /
1352) 0 ft), 24 AWG, 13V DC min., 85 C min nA ED rormats Operating Temperature oe 9 10% ~ 90% (no conder lum:
Dimensions 95 x 108 x 23 mm/
(WxHxD) 3.74 x 4.25 x 0.91 in Ingress Protection Certification
-35 C ~ 66C / -31 F -
CE, FCC, RoHS, UL 2 Note: GID ID format is only supported in GV-|
V1.2 or later.
~ 150.8 F sation) 65.8 x 115.6 x 20.5 20.9 x 105.6 x 20.5 mm/4.6x2.6x0.8in | mm/0.8x4.2x0.8in 120 g/ 0.26 Ib 80 g/0.17 Ib 4, CUL RK1352 / GV-R1352 / GV-DFR1352 (Rev. B) 33 G GeoVision:
2.9.1 The Number of Readers Sup GV-AS100 GV-AS1010 Not GV-AS110 / 120 GV-AS100 / 110 / 120 with GV-ASBox | 2 GV-AS100 / 110 / 120 with GV-ASNet | Not GV-AS210 / 2110 / 2120 4 GV-AS410 / 4110 8 GV-AS810 / 8110 GV-EV48 Not GV-CS1320 Not ported by GV-AS Controllers supported Not supported 4 supported 2 8 16 supported 2 supported 2 Bi. 2.10 Accessory (GV-RK1352 <
Optional accessories can expand the capabiliti GV-R1352 Card Reader. Consult your sales re GV-MountA900 is a mount and GV-R1352 to a US sin nie specs iii aan Weight: 55 g / 0.12 Ib Connecting GV-MountA900 1. Screw GV-MountA900 to the US single ge 2. Thread the cable through GV-MountA900 e GV-R1352: Secure through holes A e GV-RK1352: Secure through holes B 7 3V-RK1352 / R1352 / DFR1352 Card Reader ind GV-R1352 Only) es and versatilities of your GV-RK1352 and presentative for more information. ing plate that allows you to attach GV-RK1352 gle gang power box. Fcc coun abies TPOSA SL. UE ang power box through holes C. and then attach the reader. US single gang power box a 35
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-01-24 | 13.56 ~ 13.56 | DXT - Part 15 Low Power Transceiver, Rx Verified | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2019-01-24
|
||||
1 | Applicant's complete, legal business name |
GEOVISION INC.
|
||||
1 | FCC Registration Number (FRN) |
0021168695
|
||||
1 | Physical Address |
9F., No.246, Sec. 1, Neihu Rd., Neihu District
|
||||
1 |
Taipei City 114, N/A
|
|||||
1 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
J******@eurofins.de
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
PWQ
|
||||
1 | Equipment Product Code |
R1352B
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
Y**** W******
|
||||
1 | Title |
Assistant V.P.
|
||||
1 | Telephone Number |
886-2******** Extension:
|
||||
1 | Fax Number |
886-2********
|
||||
1 |
y******@geovision.com.tw
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Worldwide Testing Services (Taiwan) Co., Ltd.
|
||||
1 | Name |
D******** S********
|
||||
1 | Physical Address |
6F., No. 58, Lane 188, Ruey Kuand Rd.
|
||||
1 |
Taipei, 114
|
|||||
1 |
Taiwan
|
|||||
1 | Telephone Number |
+8862********
|
||||
1 | Fax Number |
88626********
|
||||
1 |
d******@wts-lab.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXT - Part 15 Low Power Transceiver, Rx Verified | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | RFID Reader | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Worldwide Testing Services (Taiwan) Co., Ltd.
|
||||
1 | Name |
D****** S********
|
||||
1 | Telephone Number |
886-2******** Extension:
|
||||
1 | Fax Number |
886-2********
|
||||
1 |
d******@wts-lab.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 13.56000000 | 13.56000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC