|
app
s
|
Applicant Information
|
|
|
1 2 3 4
|
Effective |
2023-01-17
|
|
1 2 3 4
|
2022-11-14
|
|
1 2 3 4
|
Applicant's complete, legal business name |
Getac Technology Corporation
|
|
1 2 3 4
|
FCC Registration Number (FRN) |
0018268243
|
|
1 2 3 4
|
Physical Address |
5F.,Building A,No.209,Sec.1 Nangang.,Rd.
|
|
1 2 3 4
|
Taipei City, N/A
|
|
1 2 3 4
|
Taiwan
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4
|
TCB Application Email Address |
c******@bureauveritas.com
|
|
1 2 3 4
|
TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
1 2 3 4
|
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4
|
Grantee Code |
QYL
|
|
1 2 3 4
|
Equipment Product Code |
LN920V
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4
|
Name |
K****** C********
|
|
1 2 3 4
|
Telephone Number |
+886-******** Extension:
|
|
1 2 3 4
|
Fax Number |
+886-********
|
|
1 2 3 4
|
E-mail |
k******@getac.com.tw
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
| 1 2 3 4 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 | Equipment Class | PCB - PCS Licensed Transmitter |
| 1 2 3 4 | CBE - Citizens Band End User Devices |
| 1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | LN920 radio module |
| 1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 4 | Modular Equipment Type | Single Modular Approval |
| 1 2 3 4 | Purpose / Application is for | Class II Permissive Change |
| 1 2 3 4 | Change in Identification |
| 1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 | Grant Comments | C2PC for adding a portable Host (Brand name: Getac, Model: V110, V110G7, V110Y(Y=10 characters, Y can be 0-9, A-Z, a-z, /, \, -, _ or blank for marketing purpose) with PIFA antenna, and using software to disable LTE Band 17/ Band 30 however RX of Band 30 will still remain function. The Highest reported SAR for body worn and Simultaneous Transmission exposure conditions are: 1.17W/kg, and 1.25W/kg.
Power Listed is conducted. Single Modular Approval. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The Antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Bands 2, 4, 25,and 66; LTE of 1.4, 3, 5, 10, and 15 MHz bandwidth modes for FDD LTE Band 26 (Part22H); LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5, 12, and 26 (Part 90); LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13, 14, 17, and 30; LTE of 5, 10, 15,and 20 MHz bandwidth modes for FDD LTE Bands 7, 38, 41, and 71. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations. Class II Permissive Change: RF switches and filters changed. |
| 1 2 3 4 | C2PC for adding a portable Host (Brand name: Getac, Model: V110, V110G7, V110Y(Y=10 characters, Y can be 0-9, A-Z, a-z, /, \, -, _ or blank for marketing purpose) with PIFA antenna, and using software to disable LTE Band 17/ Band 30 however RX of Band 30 will still remain function. The Highest reported SAR for body worn and Simultaneous Transmission exposure conditions are: 0.16W/kg, and 1.00W/kg.
Output power listed is EIRP. Single Modular Approval. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The Antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing. Class II Permissive Change: RF switches and filters changed. |
| 1 2 3 4 | Power Listed is conducted. Single Modular Approval. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The Antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Bands 2, 4, 25,and 66; LTE of 1.4, 3, 5, 10, and 15 MHz bandwidth modes for FDD LTE Band 26 (Part22H); LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5, 12, and 26 (Part 90); LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13, 14, 17, and 30; LTE of 5, 10, 15,and 20 MHz bandwidth modes for FDD LTE Bands 7, 38, 41, and 71. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.
Class II Permissive Change: RF switches and filters changed. |
| 1 2 3 4 | Output power listed is EIRP. Single Modular Approval. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The Antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing.
Class II Permissive Change: RF switches and filters changed. |
| 1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4
|
Firm Name |
Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
|
|
1 2 3 4
|
SGS Taiwan Ltd. Central RF Lab
|
|
1 2 3 4
|
Name |
E**** L****
|
|
1 2 3 4
|
R**** W****
|
|
1 2 3 4
|
Telephone Number |
+886-********
|
|
1 2 3 4
|
+886-******** Extension:
|
|
1 2 3 4
|
Fax Number |
+886-********
|
|
1 2 3 4
|
E-mail |
e******@bureauveritas.com
|
|
1 2 3 4
|
r******@sgs.com
|
|