FCC ID: QYLNQ310Z NFC Module

Getac Technology Corporation Getac ZX70G2 Tablet Product NFC Board Engineering Specification Rev. 0.1 Nov 14, 2019 Getac Technology Corporation Android OS Option for Getac ZX70G2 Tablet Product, Version 9.0 (Pie) NFC Board Engineering Specification Revision 0.1 Document Revision History Summary Initial draft Date 2019.11.14 Owner Page 2 of 17 Revision 0.1 Getac Technology Corporation Android OS Option for Getac ZX70G2 Tablet Product, Version 9.0 (Pie) NFC Board Engineering Specification 1. Introduction ............................................................................................................................. 4 1.1. General Description ........................................................................................................ 4 1.2. Features ........................................................................................................................... 5 1.3. Reference Data ................................................................................................................ 7 2. Hardware description .............................................................................................................. 9 2.1. General Specifications .................................................................................................... 9 2.2. Connector Pin List ........................................................................................................ 10 2.3. Host interfaces............................................................................................................... 10 2.4. Key Part list ................................................................................................................... 11 3. Packing information .............................................................................................................. 12 4. Federal Communication Commission Interference Statement ............................................. 13 5. Industry Canada Statement ................................................................................................... 15 6. Antenna Information: ............................................................................................................ 17 7. Label Sample......................................................................................................................... 17 Page 3 of 17 Revision 0.1 1. Introduction Getac Technology Corporation Android OS Option for Getac ZX70G2 Tablet Product, Version 9.0 (Pie) NFC Board Engineering Specification 1.1. General Description The NFC module is a highly integrated transceiver module for contactless reader/writer communication at 13.56 MHz. The main chip of this NFC module is NXP NQ310. NQ310 is an NFC controller designed for integration in mobile devices and devices compliant with NFC standards (NFC Forum, NCI, EMVCo, ETSI/SCP). NQ310 is designed based on learnings from previous NXP NFC device generation to ease the integration of NFC technology in mobile devices by providing:

An optimized architecture for low-power consumption in different modes (Standby, low-power polling loop) A highly efficient integrated power management unit allowing direct supply from an extended battery supply range (2.8 V to 5.5 V). Moreover, this power management provides full flexibility to support the different configurations in the mobile devices

(screen ON, screen OFF, phone OFF) 2 SWP pads for UICC connections with dedicated power supply lines NQ310 embeds a new generation RF contactless front-end supporting various transmission modes according to NFCIP-1 and NFCIP-2, ISO/IEC14443, ISO/IEC 15693, MIFARE and FeliCa specifications. This new contactless front-end design brings a major performance step-up with on one hand a higher sensitivity and on the other hand the capability to work in active load modulation communication enabling the support of small antenna form factor. It also allows to provide a higher output power by supplying the transmitter output stage from 2.7 V to 5.25 V. distance in card mode. Enhanced Dynamic LMA (DLMA) to optimize and to enhance load modulation amplitude depending on external field strength. It allows higher range communication Independent LMA phase adjustment by step of 5 for type A, B and F Dynamic Power control which allows to make use of the maximum power in reader mode without exceeding the maximum power allowed by the standard in 0 distance. Improved card mode receiver sensitivity down to 20 mV(p-p) Page 4 of 17 Revision 0.1 Getac Technology Corporation Android OS Option for Getac ZX70G2 Tablet Product, Version 9.0 (Pie) NFC Board Engineering Specification Support of single ended receiver 1.3 W output transmitter power NQ310 provides an architecture supporting several secure element interfaces (2 SWP) allowing a full flexibility for the support of SWP-based secure elements. It enables dynamic multiple secure element management (AID routing table). Supported transmission modes are listed in Figure 1. For contactless card functionality, the NQ310 can act autonomously if previously configured by the host in such a manner. PICC functionality can be supported without phone being turned on. 1.2. Features ARM Cortex-M0 microcontroller core Code memory: 128 kB ROM, 28 kB EEPROM Data memory: 8 kB SRAM, 4 kB EEPROM Highly integrated demodulator and decoder Buffered output drivers to connect an antenna with minimum number of external components Integrated RF level detector Integrated Polling Loop for automatic device discovery Integrated routing mechanism to support multiple NFC execution environments Page 5 of 17 Revision 0.1 Getac Technology Corporation Android OS Option for Getac ZX70G2 Tablet Product, Version 9.0 (Pie) NFC Board Engineering Specification RF protocols supported ISO/IEC 14443A, ISO/IEC 14443B PICC mode designed according to EMVCo PICC. ISO/IEC 14443A, ISO/IEC 14443B PCD designed according to NFC Forum digital protocol T4T platform and ISO-DEP. FeliCa PCD mode MIFARE PCD encryption mechanism (MIFARE 1K/4K) NFC Forum tags T1T, T2T, T3T, T4T and T5T NFCIP-1, NFCIP-2 protocol NFC Forum certification release 9 for P2P, reader and card mode FeliCa PICC mode MIFARE PICC mode ISO/IEC 15693/ICODE VCD mode NFC forum compliant embedded T4T for NDEF short record Supported host interfaces NCI protocol interface according to NFC Forum standardization I2C-bus High-speed mode SPI-bus Page 6 of 17 Revision 0.1 1.3. Reference Data Getac Technology Corporation Android OS Option for Getac ZX70G2 Tablet Product, Version 9.0 (Pie) NFC Board Engineering Specification Page 7 of 17 Revision 0.1 Getac Technology Corporation Android OS Option for Getac ZX70G2 Tablet Product, Version 9.0 (Pie) NFC Board Engineering Specification Page 8 of 17 Revision 0.1 Getac Technology Corporation Android OS Option for Getac ZX70G2 Tablet Product, Version 9.0 (Pie) NFC Board Engineering Specification 2. Hardware description 2.1. General Specifications VBAT : Battery supply voltage:

Operational environment Operating Temperature: -20~60 Storage Temperature: -25~85 Page 9 of 17 Revision 0.1 Getac Technology Corporation Android OS Option for Getac ZX70G2 Tablet Product, Version 9.0 (Pie) NFC Board Engineering Specification 2.2. Connector Pin List Only one host interface can be active at same time as pins are shared for all interfaces. The selection between interfaces is fused during IC manufacturing so that different ordering 2.3. Host interfaces It provides the support of the following host interfaces:

I2C-bus Slave Interface, up to 3.4 Mbaud SPI-bus Slave Interface, up to 7 Mbaud numbers for the I2C-bus, SPI-bus version. The host interfaces are woken-up in the following way:

Wake-up with WKUP_REQ input pin I2C-bus: wake-up on I2C-bus address SPI-bus: transition of NSS serial Data received on RX line Page 10 of 17 Revision 0.1 Getac Technology Corporation Android OS Option for Getac ZX70G2 Tablet Product, Version 9.0 (Pie) NFC Board Engineering Specification To enable and ensure data flow control between NQ310 and host controller, additionally a dedicated interrupt line IRQ is provided which Active state is programmable. 2.4. Key Part list Page 11 of 17 Revision 0.1 Getac Technology Corporation Android OS Option for Getac ZX70G2 Tablet Product, Version 9.0 (Pie) NFC Board Engineering Specification 3. Packing information Page 12 of 17 Revision 0.1 Getac Technology Corporation Android OS Option for Getac ZX70G2 Tablet Product, Version 9.0 (Pie) NFC Board Engineering Specification 4. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the Consult the dealer or an experienced radio/TV technician for help. receiver is connected. IMPORTANT NOTE:

This NFC devices must be installed and used in strict accordance with the manufacturers instructions as described in the user documentation that comes with the product. Any other installation or use will violate FCC Part 15 regulations. Modifications not expressly approved by Getac could void your authority to operate the equipment. This module apply limit module approval, and just only install in end product (Brand:

Getac / Model: ZX70). Page 13 of 17 Revision 0.1 Getac Technology Corporation Android OS Option for Getac ZX70G2 Tablet Product, Version 9.0 (Pie) NFC Board Engineering Specification Radiation Exposure Statement:

The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such The final end product must be labeled in a visible area with the following: Contains FCC ID: QYLNQ310Z. The grantee's FCC ID can be used only when all FCC compliance The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. function is available. End Product Labeling:

requirements are met. Manual Information to the End User:

Page 14 of 17 Revision 0.1 Getac Technology Corporation Android OS Option for Getac ZX70G2 Tablet Product, Version 9.0 (Pie) NFC Board Engineering Specification 5. Industry Canada Statement Canada, Industry Canada (IC) Notices Class B digital circuitry of this device complies with Canadian ICES-003. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Under Industry Canada regulations, the radio transmitter(s) in this device may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This module apply limit module approval, and just only install in end product (Brand:

Getac / Model: ZX70). Radio Frequency (RF) Exposure Information The radiated output power of this device is below the Industry Canada (IC) radio frequency exposure limits. This device has been evaluated for and shown compliant with the IC Radio Frequency (RF) Exposure limits. The device should be used in such a manner such that the potential for human contact during normal operation is minimized. This device has been certified for use in Canada. Status of the listing in the Industry Canadas REL (Radio Equipment List) can be found at the following web address:

http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng Additional Canadian information on RF exposure also can be found at the following web address: http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html Canada, avis d'Industry Canada (IC) ICES-003. La circuiterie numrique de Classe B de cet appareil est conforme la norme canadienne Cet appareil est conforme aux normes d'exemption de licence RSS d'Industry Canada. Page 15 of 17 Revision 0.1 Getac Technology Corporation Android OS Option for Getac ZX70G2 Tablet Product, Version 9.0 (Pie) NFC Board Engineering Specification Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interfrence et (2) cet appareil doit accepter toute interfrence, notamment les interfrences qui peuvent affecter son fonctionnement. Conformment aux rglementations d'Industry Canada, les metteurs radio de cet appareil ne peuvent fonctionner qu' l'aide d'une antenne dont le type et le gain maximal (ou minimal) pour ces metteurs - transmetteurs sont approuvs par Industry Canada. Pour rduire le risque d'interfrence ventuelle pour les autres utilisateurs, le type et le gain de l'antenne doivent tre choisis de manire ce que la puissance isotrope rayonne quivalente (p.i.r.e.) minimale ncessaire une bonne communication soit fournie. Informations sur l'exposition la frquence radio (FR) La puissance rayonne de sortie de cet appareil est infrieure aux limites d'exposition la frquence radio d'Industry Canada (IC). Cet appareil a t valu et jug conforme aux limites d'exposition la frquence radio (FR) d'IC. Cet appareil devrait tre utilis de manire ce que le risque de contact humain au cours d'un fonctionnement normal soit rduit. Cet appareil est homologu pour l'utilisation au Canada. Pour consulter l'entre correspondant l'appareil dans la liste d'quipement radio (REL - Radio Equipment List) d'Industry Canada, rendez-vous sur:

http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=eng Pour des informations canadiennes supplmentaires sur l'exposition FR, rendez-vous sur :

http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html Page 16 of 17 Revision 0.1 Getac Technology Corporation Android OS Option for Getac ZX70G2 Tablet Product, Version 9.0 (Pie) NFC Board Engineering Specification 6. Antenna Information:

7. Label Sample Getac NQ310 FCC ID: QYLNQ310Z IC: 10301A-NQ310Z Page 17 of 17 Revision 0.1

Getac Technology Corporation 5F.,Building A,No.209,Sec.1 Nangang.,Rd., Taipei City 11568 Taiwan Date: 2020-02-05 FCC ID: QYLNQ310Z A U T H O R I Z A T I O N L E T T E R To Whom It May Concern:

Getac Technology Corporation hereby authorizes Joanna Hung / Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan), to act on its behalf in all matters relating to the Federal Communication Commission (FCC) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Joanna Hung / Specialist of BV CPS Taoyuan on Getac Technology Corporations behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please dont hesitate to contact us. Sincerely yours, Kevin Chiang Getac Technology Corporation Tel: +886-2-27857888 Fax: +886-2-26525865 E-mail: kevin.chiang@getac.com.tw

Tel: 408-526-1188 Fax: 408-526-1088 Email: sales.eaw@us.bureauveritas.com 775 Montague Expressway Milpitas, CA 95035 Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Initial Release (obsolete) Revised wording (obsolete) Updated company template (obsolete) Updated letter information (obsolete) Added FCC ID field (obsolete) Updated company name & logo (current) Revision History From 1.0 1.0 2.0 3.0 4.0 5.0 To 1.0 2.0 3.0 4.0 5.0 6.0 Approved Date Nov-14-2006 Sept25-2007 Jan-31-2012 May-23-2014 Sep-16-2014 Jun-27-2018 SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 6.0 Getac Technology Corporation 5F.,Building A,No.209,Sec.1 Nangang.,Rd., Taipei City 11568 Taiwan Date: February 5, 2020 To: BVCPS, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, _____Getac Technology Corporation_____hereby authorize Bureau Veritas Consumer Product Services, Inc. to act as a Certification Body for certifying for the following project(s):

(Product description: Tablet model name: ZX70) FCC ID: QYLNQ310Z Sincerely, Kevin Chiang Getac Technology Corporation Tel: +886-2-27857888 Fax: +886-2-26525865 E-mail: kevin.chiang@getac.com.tw SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 6.0

Getac Technology Corporation 5F.,Building A,No.209,Sec.1 Nangang.,Rd., Taipei City 11568 Taiwan Federal Communications Commission 7435 Oakland Mills Road - Gate A Columbia, Maryland 21046 Date: February 5, 2020 Schematic Diagram Block Diagram Operational Description Subject: Request for Confidentiality FCC ID: QYLNQ310Z To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commissions rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission s policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, External Photos Internal Photos Test Setup Photos Users Manual Kevin Chiang Getac Technology Corporation Tel: +886-2-27857888 Fax: +886-2-26525865 E-mail: kevin.chiang@getac.com.tw

775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: sales.eaw@us.bureauveritas.com Modular Approval Declaration Letter Reason for Amendment (current / obsolete) Initial Release (Obsolete) Added IC Modular Letter (Obsolete) Add LMA and MA option (Obsolete) Revised per RSS Gen issue 3.0 (Obsolete) Removed Foot(2) (obsolete) Adding New note per KDB996369 D01 V01R03

(obsolete) Updated company template & Added text box (obsolete) Updated modular requirement (obsolete) Updated template to meet RSP 100 issue 10 (obsolete) Updated template to meet RSP 100 issue 11 (obsolete)) Revised the Modular Requirement statements

(obsolete) Updated template with BV logo (current) Revision History To From 1.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 Approved Date Dec-04-2006 Feb 16 2009 April 14 2010 Jan 12 2011 July 19 2011 August 29 2011 Jan-31-2012 Sept 05 2014 Nov 20 2014 March 19 2015 July 28, 2016 June 26, 2019 SCS-F26 Modular Approval Letter Page 1 of 2 Rev 12.0 Getac Technology Corporation 5F.,Building A,No.209,Sec.1 Nangang.,Rd., Taipei City 11568 Taiwan Date: February 19, 2020

(NFC Module) FCC ID: QYLNQ310Z , is seeking FCC Authorization as a The EUT meets the requirements for as detailed in KDB 996369. Compliance to each of the requirements is described below:

Item Single Modular Transmitter /

Single Modular Approval /

Modular requirement Single Limited Modular Transmitter (Please check one) Single Limited Modular Approval (Please check one) Yes No Please provide a detailed explanation if the answer is No. 1 2 3 4 5 6 7 8 Note:

(1) Have its own RF shielding Have buffered modulation/data inputs (if such inputs are provided) The modular transmitter must have its own power supply regulation. Meet the antenna requirements of section 15.203 V V V V Be tested in a stand-alone configuration, i.e., the antenna, AC or DC power and data input/output lines must be connected to the module but, the module must not be inside another case during testing. Be labeled with its own FCC ID number, and if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. The modular transmitter is manufactured so that the user can not influence the operation of the transmitter that will operate outside of the scope of the regulations. Address compliance with the Commission`s RF exposure limits in Sections 1.1310 and 2.1093. V The module has been installed in the host device

(equipment: tablet, brand: Geatc, model: ZX70) V V V LMA may be granted when one or more of the requirements in the table above cannot be demonstrated. LMA will also be issued in those instances where applicants can demonstrate that they will retain control over the final installation of the device, such that compliance of the end product is assured. In such cases, an operating condition on the LMA for the module must state that the module is only approved for use when installed in devices produced by a specific manufacturer. When LMA is sought, the application for equipment certification must specifically state how control of the end product into which the module will be installed, and will be maintained, such that full compliance of the end product is always ensured.

(2) Please provide Clear and specific instructions describing the conditions, limitations and procedures for third-parties to use and/or integrate the module into a host device.

(3) For non-Software Defined Radio transmitter modules where software is used to ensure compliance of the device, technical description of how such control is implemented to ensure prevention of third party modification must be provided (see KDB 594280). Note 1: Compliance of a module in its final configuration is the responsibility of the applicant. A host device will not be considered certified if the instructions regarding antenna configuration provided in the original description, of one or more separately certified modules it contains, were not followed. Example: A separately certified low-power transceiver module using Bluetooth technology which is housed in a desktop computer, laptop or peripheral does not require the overall system to be recertified, if the desktop computer, laptop or peripheral, as a stand-alone unit, complies with all applicable technical standards. Kevin Chiang Getac Technology Corporation Tel: +886-2-27857888 Fax: +886-2-26525865 E-mail: kevin.chiang@getac.com.tw SCS-F26 Modular Approval Letter Page 2 of 2 Rev 12.0