FCC ID: QYL-5127MODMIN RFID Module

B360 USER MANUAL Rugged Mobile Computing Solutions December 2019 TRADEMARKS The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. All brand and product names are trademarks or registered trademarks of their respective companies. NOTE The information in this manual is subject to change without notice. For the latest version of the manual, please visit the Getac website at www.getac.com. Chapter 1 Chapter 2 Table of Contents Getting Started ...................................................................... 1 Getting the Computer Running ........................................... 2 Unpacking .................................................................. 2 Connecting to AC Power ............................................... 3 Turning On and Off the Computer .................................. 4 Taking a Look at the Computer ......................................... 6 Front Components ........................................................ 6 Rear Components ........................................................ 7 Right-Side Components ................................................. 9 Left-Side Components .................................................. 10 Top-open Components ................................................. 12 Bottom Components ..................................................... 15 Operating Your Computer ..................................................... 16 Using the Keyboard ........................................................ 17 Typewriter Keys .......................................................... 17 Cursor-Control Keys .................................................... 17 Numeric Keypad ......................................................... 18 Function Keys ............................................................ 19 Fn Key ..................................................................... 19 Hot Keys .................................................................. 19 Windows Keys ............................................................ 21 Using the Touchpad ....................................................... 22 Touch Gestures for Windows 10 ................................... 23 Configuring the Touchpad ............................................ 23 Using the Touchscreen (Optional) ................................... 24 i Chapter 3 Chapter 4 Using Multi-touch Gestures .......................................... 25 Using the Tether (Optional) ....................................... 27 Using Network and Wireless Connections ........................... 28 Using the LAN .......................................................... 28 Using the WLAN ....................................................... 28 Using the Bluetooth Feature ......................................... 29 Using the WWAN Feature (Optional) ........................... 30 Using the Optical Disc Drive (Select Models Only) .............. 32 Inserting and Removing a Disc..................................... 33 Using the Fingerprint Scanner (Optional) .......................... 34 Enrolling a Fingerprint ................................................. 34 Fingerprint Login ........................................................ 35 Using the RFID Reader (Optional) .................................. 37 Managing Power .................................................................. 38 AC Adapter .................................................................. 39 Battery Pack ................................................................ 40 Charging the Battery Pack ........................................... 40 Initializing the Battery Pack ........................................... 41 Checking the Battery Level ........................................... 41 Battery Low Signals and Actions ................................... 42 Replacing the Battery Pack .......................................... 43 Power-Saving Tips ........................................................ 45 Expanding Your Computer .................................................... 46 Connecting Peripheral Devices .......................................... 47 Connecting a USB Device ........................................... 47 Connecting a Device for USB Charging .......................... 48 Connecting a Monitor .................................................. 49 Connecting a Serial Device .......................................... 50 Connecting an Audio Device ......................................... 51 Using Storage and Expansion Cards ................................. 52 Using Storage Cards .................................................. 52 Using Smart Cards .................................................... 53 Using ExpressCards (Select Models Only) ..................... 54 Using PC Cards (Select Models Only) ......................... 55 Expanding or Replacing .................................................. 57 ii Chapter 5 Chapter 6 Chapter 7 Chapter 8 Installing the SSD ...................................................... 57 Using BIOS Setup ................................................................. 58 When and How to Use .................................................. 59 Menu Descriptions ......................................................... 60 Information Menu ....................................................... 60 Main Menu ............................................................... 60 Advanced Menu .......................................................... 61 Security Menu ........................................................... 63 Boot Menu ............................................................... 64 Exit Menu ................................................................ 64 Using Getac Software ........................................................... 66 G-Manager .................................................................. 67 Care and Maintenance ......................................................... 68 Protecting the Computer .................................................. 69 Using an Anti-Virus Strategy ....................................... 69 Using the Cable Lock ................................................. 69 Taking Care of the Computer .......................................... 70 Location Guidelines ..................................................... 70 General Guidelines ..................................................... 70 Cleaning Guidelines ..................................................... 71 Battery Pack Guidelines ............................................... 71 Touchscreen Guidelines ............................................... 73 When Traveling ............................................................. 74 Troubleshooting .................................................................. 75 Preliminary Checklist ....................................................... 76 Solving Common Problems .............................................. 77 Battery Problems ........................................................ 77 Bluetooth Problems ..................................................... 77 Display Problems ....................................................... 78 DVD Drive Problems .................................................. 78 Fingerprint Scanner Problems........................................ 79 Hardware Device Problems .......................................... 79 Hard Disk Drive Problems ........................................... 80 Keyboard and Touchpad Problems ................................. 80 iii LAN Problems ............................................................ 81 Power Management Problems ........................................ 81 Software Problems ..................................................... 82 Sound Problems ........................................................ 82 Startup Problems ....................................................... 82 WLAN Problems ........................................................ 83 Other Problems ......................................................... 84 Resetting the Computer .................................................. 85 System Recovery ........................................................... 86 Using Windows RE .................................................... 86 Using Recovery Partition .............................................. 87 Using the Driver Disc (Optional) ..................................... 88 Appendix A Specifications ...................................................................... 89 Appendix B Regulatory Information ........................................................ 91 On the Use of the System ............................................. 92 Class B Regulations ................................................... 92 ANSI Warning ........................................................... 93 Safety Notices ........................................................... 94 On the Use of the RF Device ........................................ 99 USA and Canada Safety Requirements and Notices.......... 99 European Union CE Marking and Compliance Notices ....... 100 User Notification of Take-back Service ............................. 103 ENERGY STAR ........................................................... 105 Battery Recycling .......................................................... 107 California Proposition 65 ................................................ 108 About Battery and External Enclosure Replacement ............. 109 Battery .................................................................... 109 External Enclosure ..................................................... 109 iv Chapter 1 Getting Started This chapter first tells you step by step how to get the computer up and running. Then, you will find a section briefly introducing the external components of the computer. 1 Getting the Computer Running Unpacking After unpacking the shipping carton, you should find these standard items:

B360 notebook computer AC adapter AC power cord Battery pack x 2 Stylus*

Tether*

Document(s) Driver disc*

* Optional Inspect all the items. If any item is damage or missing, notify your dealer immediately. 2 Connecting to AC Power CAUTION: Use only the AC adapter included with your computer. Using other AC adapters may damage the computer. NOTE:

The battery pack is shipped to you in power saving mode that protects it from charging/discharging. It will get out of the mode to be ready for use when you install the battery pack and connect AC power to the computer for the very first time. When the AC adapter is connected, it also charges the battery pack. For information on using battery power, see Chapter 3. You must use AC power when starting up the computer for the very first time. 1. Plug the DC cord of the AC adapter to the power connector of the computer

(). 2. Plug the female end of the AC power cord to the AC adapter and the male end to an electrical outlet (). 3. Power is being supplied from the electrical outlet to the AC adapter and onto your computer. Now, you are ready to turn on the computer. 3 Turning On and Off the Computer Turning On 1. Open the top cover by pushing the cover latch () and lifting up the cover

(). You can tilt the cover forward or backward for optimal viewing clarity. 2. Press the power button (

). The Windows operating system should start. Turning Off When you finish a working session, you can stop the system by turning off the power or leaving it in Sleep or Hibernation mode:

4 To... Power off

(Shutdown) Click Power Shut down. Do this... Sleep Use one of these methods:

Press the power button.*

Close the top cover.*

Press Fn + F12.*

Click Power Sleep. Hibernate By default, this option is not shown in the Start menu. If you want to use the feature, set up accordingly in Windows settings.

* Sleep is the default result of the action. You can change what the action does through Windows settings. 5 Taking a Look at the Computer NOTE:

Depending on the specific model you purchased, the color and look of your model may not exactly match the graphics shown in this document. The information in this document applies to both Standard and Expansion Unit models though most illustrations show the Standard model as the example. The difference between the Expansion Unit model and Standard model is that the former has an expansion unit at the bottom providing extra functions. CAUTION: You need to open the protective covers to access the connectors. When not using a connector, make sure to close the cover completely for water-

and dust-proof integrity. (Engage the locking mechanism if existing.) Front Components Ref Component Top cover latch Handle Locks the top cover. Provides a convenient way to carry the computer. Description 6 Rear Components For covers with an arrowhead icon, push the cover toward one side to unlock and the other side to lock. The arrowhead points to the side for unlocking. Standard Model Expansion Unit Model 7 Description Locks the computer to a stationary object for security. Connects a USB device. Connects the LAN cable. Connects a HDMI monitor or TV set. Connects an external display monitor. Connects a serial mouse or serial communication device. Connects a serial mouse or serial communication device. Connects a DisplayPort monitor or TV set. Ref Component Kensington lock USB 3.1 Gen 2 port RJ45 connector HDMI connector a VGA connector b RS-232 serial connector c a RS-232 serial connector b DisplayPort connector c USB 3.1 Gen 2 Type-C port Connects a USB device that supports USB Type-C connection. Power connector RS-232 serial connector (optional) Connects the AC adapter. Connects a serial mouse or serial communication device. 8 Right-Side Components For covers with an arrowhead icon, push the cover toward one side to unlock and the other side to lock. The arrowhead points to the side for unlocking. Standard Model Expansion Unit Model Ref Component Barcode reader lens (optional) SIM card slot

(optional) Storage card reader Combo audio Description Scans and reads barcodes. Accepts a SIM card for models having the WWAN module. NOTE: The slot still exists but cannot be used for models without the WWAN module. Accepts an SD card for removable storage media. Connects a set of headphones or external speakers with 9 Ref Component Description connector amplifier. Supports a headset microphone with 4-pole TRRS 3.5mm jack. Can be used to charge mobile devices. PowerShare USB port Optical disc drive Reads or writes data to or from an optical disc. Left-Side Components For covers with an arrowhead icon, push the cover toward one side to unlock and the other side to lock. The arrowhead points to the side for unlocking. Standard Model Expansion Unit Model 10 Description Stylus tethered to this hole. For storing the stylus (optional). Contains the solid-state drive, which is the mass storage device of your computer. Depending on your model, you have one SSD (SSD 1) or two SSDs (SSD 1 and SSD 2). CAUTION: This device is not hot-swappable. Do not remove it without turning off the system first. Accepts a smart card for additional security feature. Accepts an ExpressCard for additional functions. Component Ref Tether hole Stylus slot SSD canister Smart card reader a ExpressCard slot b PC Card slot Accepts a PC card for additional functions. 11 Top-open Components Component Ref Microphone Camera indicator

(optional) IR sensor

(optional) Description Receives sound and voice for the computer. Lights up when the camera is in use. Detects the infrared energy of objects to form an image. The sensor flashes red light when in use. The near infrared (IR) imaging capability allows you to use Windows Hello face authentication. 12 Ref Component Camera lens

(optional) Camera cover

(optional) LCD screen Stereo speaker Touchpad Indicators Power Description Allows you to use the camera function. Covers the camera lens. Slide the camera cover toward the right to use the camera;

slide it toward the left for privacy protection. Displays the output of the computer. Select models have the touchscreen feature. Sends out sound and voice from the computer. Serves as the pointing device of the computer. Lights green when computer is on. Blinks green when computer is in Sleep mode. Battery Lights amber when the battery is being charged. Lights green when battery charging is completed. Blinks green to indicate the batterys built-in high temperature protection mechanism is activated. CAUTION: Do not remove the battery during this period. Blinks red (once per second) when the batterys capacity is below 10%. Blinks red rapidly (once per 0.5 second) when there is a thermal protection problem. Ask for repair service in case this happens. Blinks amber when the battery charging is in an abnormal state. Replace the battery in case this happens. Caps Lock Num Lock Lights green when Caps Lock is on. Lights green when Num Lock is on. 13 Ref Component Hard Disk Description Blinks green when the computer is accessing the hard disk (i.e. the SSD on your computer model). Airplane mode Lights green when the RF radio of any RF feature

(WLAN/Bluetooth/WWAN) is on. If Airplane mode is switched on, the light turns off. P1 button Toggles Blackout mode on or off. P2 button In Blackout mode, the LCD backlight, keyboard/

button backlight, and LED indicators are all turned off;

and the sound is muted. Can be changed to a different function using G-Manager. Toggles the sunlight-readable mode on or off. In sunlight-readable mode, the LCD brightness is increased to the highest level. Can be changed to a different function using G-Manager. Power button Turns the power on or off. (The default off state is Sleep mode.) Keyboard Serves as the data input device of the computer. Select models have one of the below components. a HF RFID antenna Reads data from HF RFID tags. b Fingerprint scanner Serves as the fingerprint verification, preventing unauthorized access to your computer. 14 Bottom Components Ref Component Antenna pass-

through

(optional) Description Connects to the docking station for using external WWAN/WLAN/GPS antenna. WWAN GPS WLAN Battery pack and

) Docking connector Supplies power to your computer when external power is not connected. Connects to the office or vehicle dock (purchased separately). 15 Chapter 2 Operating Your Computer This chapter provides information about the use of the computer. If you are new to computers, reading this chapter will help you learn the operating basics. If you are already a computer user, you may choose to read only the parts containing information unique to your computer. CAUTION:

Do not expose your skin to the computer when operating it in a very hot or cold environment. The computer can get uncomfortably warm when you use it in high temperatures. As a safety precaution in such a circumstance, do not place the computer on your lap or touch it with your bare hands for extended periods of time. Prolonged body contact can cause discomfort and potentially a burn. 16 Using the Keyboard Your keyboard has all the standard functions of a full-sized computer keyboard plus an Fn key added for specific functions. The standard functions of the keyboard can be further divided into four major categories:

Typewriter keys Cursor-control keys Numeric keys Function keys Typewriter Keys Typewriter keys are similar to the keys on a typewriter. Several keys are added such as the Ctrl, Alt, Esc, and lock keys for special purposes. The Control (Ctrl) / Alternate (Alt) key is normally used in combination with other keys for program-specific functions. The Escape (Esc) key is usually used for stopping a process. Examples are exiting a program and canceling a command. The function depends on the program you are using. Cursor-Control Keys Cursor-control keys are generally used for moving and editing purposes. NOTE: The word cursor refers to the indicator on the screen that lets you know exactly where on your screen anything you type will appear. It can take the form of a vertical or horizontal line, a block, or one of many other shapes. 17 Numeric Keypad A 15-key numeric keypad is embedded in the typewriter keys as shown next:

Numeric keys facilitate entering of numbers and calculations. When Num Lock is on, the numeric keys are activated; meaning you can use these keys to enter numerals. NOTE:

When the numeric keypad is activated and you need to type the English letter in the keypad area, you can turn Num Lock off or you can press Fn and then the letter without turning Num Lock off. Some software may not be able to use the numeric keypad on the computer. If so, use the numeric keypad on an external keyboard instead. The Num Lock key can be disabled. (See Main Menu in Chapter 5.) 18 Function Keys Fn Key Hot Keys On the top row of the keys are the function keys: F1 to F12. Function keys are multi-purpose keys that perform functions defined by individual programs. The Fn key, at the lower left corner of the keyboard, is used with another key to perform the alternative function of a key. To perform a desired function, first press and hold Fn, then press the other key. Hot keys refer to a combination of keys that can be pressed any time to activate special functions of the computer. Most hot keys operate in a cyclic way. Each time a hot key combination is pressed, it shifts the corresponding function to the other or next choice. You can easily identify the hot keys with the icons imprinted on the keytop. The hot keys are described next. Key Description Switches the keyboard backlight on or off.*

Switches the RF (radio frequency) radio on and off. When off, all wireless modules (such as WLAN, Bluetooth, and WWAN) cannot be used. When on, individual settings of the module work. Decreases the sound volume. Increases the sound volume. 19 Key Description Switches the display output to the next choice if an external display is connected. Choices are:

LCD only LCD + External display (Duplicate) LCD + External display (Extend) External display only The hot keys are equivalent to Windows logo key + P. Decreases the LCD brightness. Increases the LCD brightness. Switches the touchscreen function off or on.*

Switches the touchpad function off or on. Switches the system sound output off (mute) or on. Switches the display backlight off or on. Serves as the sleep button that you can define with Windows Power Options. TABLE NOTE: * means select models only. 20 Windows Keys The keyboard has two keys that perform Windows-specific functions:

Logo key and Application key. Windows Windows Logo key opens the Start menu and performs software-

The specific functions when used in combination with other keys. The key usually has the same effect as a right mouse click. Application 21 Using the Touchpad CAUTION: Do not use a sharp object such as a pen on the touchpad. Doing so may damage the touchpad surface. NOTE:

You can press Fn+F9 to toggle the touchpad function on or off. For optimal performance of the touchpad, keep your fingers and the pad clean and dry. When tapping on the pad, tap lightly. Do not use excessive force. The touchpad is a pointing device that allows you to communicate with the computer by controlling the location of the pointer on the screen and making selection with the buttons. The touchpad consists of a rectangular pad (work surface) and a left and a right button. To use the touchpad, place your forefinger or thumb on the pad. The rectangular pad acts like a miniature duplicate of your display. As you slide your fingertip across the pad, the pointer (also called cursor) on the screen moves accordingly. When your finger reaches the edge of the pad, simply relocate yourself by lifting the finger and placing it on the other side of the pad. Here are some common terms that you should know when using the touchpad:

Term Point Move your finger on the pad until the cursor points to the selection on the screen. Action 22 Term Click Drag and drop Action Press and release the left button. or Tap gently anywhere on the pad. or Tap twice on the pad rapidly. Double-click Press and release the left button twice in quick succession. Press and hold the left button, then move your finger until you reach your destination (drag). Finally, release the button (drop) when you finish dragging your selection to the destination. The object will drop into the new location. or Gently tap twice on the pad and on the second tap, keep your finger in contact with the pad. Then, move your finger across the pad to drag the selected object to your destination. When you lift your finger from the pad, the selected object will drop into place. TABLE NOTE: If you swap the left and right buttons, tapping on the touchpad as an alternative method of pressing the left button will no longer be valid. Touch Gestures for Windows 10 The touchpad supports touch gestures for Windows 10 such as two-finger scrolling, pinch zoom, rotating, and others. For settings information, go to ETD Properties Options. Configuring the Touchpad You may want to configure the touchpad to suit your needs. For example, if you are a left-handed user, you can swap the two buttons so that you can use the right button as the left button and vice versa. You can also change the size of the on-screen pointer, the speed of the pointer, and so on. To configure the touchpad, go to Settings Devices Mouse & touchpad. 23 Using the Touchscreen (Optional) NOTE: You can press Fn+F8 to toggle the touchscreen function on or off. CAUTION: Do not use a sharp object such as a ballpoint pen or pencil on the touchscreen. Doing so may damage the touchscreen surface. Use your finger or the included stylus. Select models have a capacitive touchscreen. This type of touchscreen responds to objects that have conductive properties, such as fingertips and a capacitive-tipped stylus. You can navigate on the screen without using a keyboard, touchpad, or mouse. You can change the touchscreen sensitivity settings to suit your scenario. Double-tap the Touch Screen Mode shortcut on Windows desktop to open the settings menu and select one of the options (as shown below). Select this if you prefer using fingertips. Also, select this when raindrops are falling on the screen and should be j d i Select this if you are using the stylus. (You must use the one supplied with your model ) Select this if you are wearing gloves (referring to warm gloves or work gloves, not referring to touchscreen-capable gloves). NOTE:

In high temperatures (above 60 oC / 140 F), set the mode to Touch instead of Glove or Pen mode. If liquid is spilled on the touchscreen causing a wet area, the area will stop responding to any inputs. For the area to function again, you must dry it. 24 Gestures Pan

(Scroll) Zoom

(Pinch) The following table shows how you use the touchscreen to obtain equivalent mouse functions. Term/Action Tap: Touch the screen once. Double-tap: Touch the screen twice rapidly. Equivalent Mouse Function Click/Point Double-click Tap and hold: Tap and hold until a popup menu appears. Right-click Drag: Hold the stylus (or finger) on the screen and drag across the screen until reaching your destination. Drag Using Multi-touch Gestures You can interact with your computer by placing two fingers on the screen. The movement of the fingers across the screen creates gestures, which send commands to the computer. Here are the multi-touch gestures that you can use:

Actions

( = finger down; = finger up) Descriptions Use panning to see another part of a page that has scroll bars. Use zooming to make an item (a photo for example) on the screen larger or smaller. The gesture works in applications that support mouse wheel zooming. or Drag 1 or 2 fingers up or down. Move two fingers apart/toward each other. 25 Gestures Rotate Press and Tap Two-

finger Tap Flicks Actions

( = finger down; = finger up) Descriptions or Move two fingers in opposing directions.

-or-

Use one finger to pivot around another. Press on target and tap using a second finger. Tap two fingers at the same time (where the target is in the midpoint between the fingers). Make quick drag gestures in the desired direction. Use rotating to move a picture or other item on the screen in a circular direction (clockwise or counter-

clockwise). The gesture works in applications that support the specific gesture. Use press and tap to access the shortcut menu. The function is defined by applications that support the specific gesture. Flick left or right to navigate back and forward in a browser and other applications. The gesture works in most applications that support back and forward. 26 Using the Tether (Optional) You can purchase a stylus and tether for your computer model. Use the tether to attach the stylus to the computer. 1. Thread one of the tethers loop through the hole of the stylus (), tie a dead knot at the end (), and pull the tether () so that the knot fills in the hole and prevents the tether from falling off. 2. Insert the other loop to the tether hole on the computer (). Then, insert the stylus through the loop () and pull it tight. 3. When not in use, store the stylus in the stylus slot. 27 Using Network and Wireless Connections Using the LAN The internal 10/100/1000Base-T LAN (Local Area Network) module allows you to connect your computer to a network. It supports data transfer rate up to 1000 Mbps. Using the WLAN The WLAN (Wireless Local Area Network) module supports IEEE 802.11ax, compatible with 802.11a/b/g/n/ac. Turning On/Off the WLAN Radio To turn on the WLAN radio:

Click On position. To turn off the WLAN radio:

Settings Network & Internet Wi-Fi. Slide the Wi-Fi switch to the You can turn off the WLAN radio the same way you turn it on. If you want to quickly turn off all wireless radio, simply switch on Airplane mode. Click mode switch to the On position. Settings Network & Internet Airplane mode. Slide the Airplane 28 Connecting to a WLAN Network 1. Make sure that the WLAN function is enabled (as described above). 2. Click the network icon in the lower right of the task bar. 3. In the list of available wireless networks, click a network, and then click Connect. 4. Some networks require a network security key or passphrase. To connect to one of those networks, ask your network administrator or Internet service provider

(ISP) for the security key or passphrase. For more information on setting a wireless network connection, refer to Windows online help. Using the Bluetooth Feature The Bluetooth technology allows short-range wireless communications between devices without requiring a cable connection. Data can be transmitted through walls, pockets and briefcases as long as two devices are within range. Turning On/Off the Bluetooth Radio To turn on the Bluetooth radio:

Click On position. To turn off the Bluetooth radio:

Settings Devices Bluetooth. Slide the Bluetooth switch to the You can turn off the Bluetooth radio the same way you turn it on. If you want to quickly turn off all wireless radio, simply switch on Airplane mode. Click mode switch to the On position. Settings Network & Internet Airplane mode. Slide the Airplane 29 Connecting to another Bluetooth Device 1. Make sure that the Bluetooth function is enabled (as described above). 2. Make sure that the target Bluetooth device is turned on, discoverable and within close range. (See the documentation that came with the Bluetooth device.) 3. Click Settings Devices Bluetooth. 4. Select the device you want to connect from the search results. 5. Depending on the type of Bluetooth device that you want to connect to, you will need to enter the pertinent information. For detailed information on using the Bluetooth feature, see Windows online Help. Using the WWAN Feature (Optional) A WWAN (Wireless Wide Area Network) uses mobile telecommunication cellular network technologies to transfer data. The WWAN module of your computer supports 3G and 4G LTE. NOTE: Your model only supports data transmission; voice transmission is not supported. Installing a SIM Card 1. Turn off the computer and disconnect the AC adapter. 2. Open the cover of the SIM card slot. 3. Remove one screw to detach the small metal plate that covers the SIM card slot. 30 4. Insert the SIM card into the slot. Make sure the golden contact area on the card is facing upward and the beveled corner on the SIM card facing inward. 5. Close the cover. Turning On/Off the WWAN Radio To turn on the WWAN radio:

Click switch to the On position. To turn off the WWAN radio:

Settings Network & Internet Airplane mode. Slide the Cellular You can turn off the WWAN radio the same way you turn it on. If you want to quickly turn off all wireless radio, simply switch on Airplane mode. Click mode switch to the On position. Settings Network & Internet Airplane mode. Slide the Airplane Setting up a WWAN Connection Settings Network & Internet Cellular. (For detailed information on Click cellular settings in Windows 10, see Microsoft Support website.) 31 Using the Optical Disc Drive (Select Models Only) Expansion Unit models have a Super Multi DVD drive or Blu-ray DVD drive. CAUTION:

When inserting a disc, do not use force. Make sure that the disc is correctly inserted into the tray, and then close the tray. Do not leave the drive tray open. Also, avoid touching the lens in the tray with your hand. If the lens becomes dirty, the drive may malfunction. Do not wipe the lens using materials with rough surface (such as paper towel). Instead, use a cotton swab to gently wipe the lens. FDA regulations require the following statement for all laser-based devices:

Caution, Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. NOTE: The DVD drive is classified as a Class 1 laser product. This label is located on the DVD drive. NOTE: This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. 32 Inserting and Removing a Disc Follow this procedure to insert or remove a disc:

1. Turn on the computer. 2. Press the eject button and the DVD tray will slide out partially. Gently pull on it until it is fully extended. 3. To insert a disc, place down the disc in the tray with its label facing up. Slightly press the center of the disc until it clicks into place. Eject button To remove a disc, hold the disc by its outer edge and lift it up from the tray. 4. Gently push the tray back into the drive. NOTE: In the unlikely event that you are unable to release the drive tray by pressing the eject button, you can manually release the disc. (See DVD Drive Problems in Chapter 8.) 33 Using the Fingerprint Scanner

(Optional) CAUTION:

For optimal performance, both the scanning surface and the finger should be clean and dry. Clean the scanning surface when needed. You can use adhesive tape to remove dirt and oil from the scanner surface. It is not recommended that you use the fingerprint scanner in a below-freezing temperature. The moisture on your finger can freeze to the scanners metal surface when you touch it, resulting in a failed operation. Besides, touching freezing metal with your finger can cause frostbite. The fingerprint scanner provides a strong authentication mechanism based on fingerprint recognition. You can log on to Windows and dismiss the lock screen with an enrolled fingerprint instead of a password. Fingerprint scanner Enrolling a Fingerprint NOTE: You can enroll a fingerprint only after creating a password for the Windows user account. 1. Click Settings Accounts Sign-in options. 2. On the right side under Fingerprint, click Set up. 34 3. Follow the onscreen instructions to complete. When placing your finger on the scanner, make sure you position your finger correctly as described and illustrated below. Maximum contact area: Place your finger to completely cover the scanner with maximum contact surface. Place on the center: Position the center of your fingerprint (core) at the center of scanner. Top View Side View Scanner Core After placing your finger on the scanner, lift it up and place it down again. You should slightly move your finger between each reading. Repeat this action several times (normally between 12 and 16 times) until the fingerprint is enrolled. Fingerprint Login NOTE: The fingerprint login process can take a while. This is because the system has to check hardware devices and security configuration before initiating the fingerprint scanner. With an enrolled fingerprint, the user can log on by tapping the Fingerprint option in Windows login screen and then placing the finger on the scanner. The user can also dismiss the lock screen with the fingerprint. The fingerprint scanner has 360-degree readability. You can place your finger in any orientation for the scanner to recognize an enrolled fingerprint. 35 If fingerprint login attempts fail three times, you will be switched to password login. 36 Using the RFID Reader (Optional) Select models have an HF RFID reader. The reader can read data from HF (High Frequency) RFID (Radio Frequency Identification) tags. The RFID reader is enabled by default. To enable or disable the reader, run the BIOS Setup program and select Advanced Device Configuration RFID Card Reader. (See Chapter 5 for information on BIOS Setup.) For optimal results when reading an RFID tag, have the tag face the antenna in the same orientation as indicated by the icon on the exterior of the Tablet PC. The icon indicates where the RFID antenna is located. RFID antenna area NOTE:

When not using an RFID card, do not leave it within or near the antenna area. For enhanced applications and customization of the module, contact your authorized Getac dealer. 37 Chapter 3 Managing Power Your computer operates either on external AC power or on internal battery power. This chapter tells you how you can effectively manage power. To maintain optimal battery performance, it is important that you use the battery in the proper way. 38 AC Adapter CAUTION:

The AC adapter is designed for use with your computer only. Connecting the AC adapter to another device can damage the adapter. The AC power cord supplied with your computer is for use in the country where you purchased your computer. If you plan to go overseas with the computer, consult your dealer for the appropriate power cord. When you disconnect the AC adapter, disconnect from the electrical outlet first and then from the computer. A reverse procedure may damage the AC adapter or computer. When unplugging the connector, always hold the plug head. Never pull on the cord. The AC adapter serves as a converter from AC (Alternating Current) to DC (Direct Current) power because your computer runs on DC power, but an electrical outlet usually provides AC power. It also charges the battery pack when connected to AC power. The adapter operates on any voltage in the range of 100-240 VAC. 39 Battery Pack The battery pack is the internal power source for the computer. It is rechargeable using the AC adapter. NOTE: Care and maintenance information for the battery is provided in the Battery Pack Guidelines section in Chapter 7. Charging the Battery Pack NOTE:

Charging will not start if the internal temperature of the battery pack is below 0 C (32 F) or above 50 C (122 F); the charging process will stop if the internal temperature of the battery pack gets above 60 C (140 F). To avoid damaging the battery under this situation, disconnect the AC adapter and wait for the battery to return to room temperature before charging again. During charging, do not disconnect the AC adapter before the battery has been fully charged; otherwise you will get a prematurely charged battery. The battery has a high temperature protection mechanism which limits the maximum charge of the battery to 80% of its total capacity in the event of high temperature conditions. In such conditions, the battery will be regarded as fully charged at 80% capacity. The battery level may automatically lessen due to the self-discharge process, even when the battery pack is fully charged. This happens no matter if the battery pack is installed in the computer. To charge the battery pack, connect the AC adapter to the computer and an electrical outlet. The Battery Indicator ( ) on the computer glows amber to indicate that charging is in progress. You are advised to keep the computer power off while the battery is being charged. When the battery is fully charged, the Battery Indicator lights green. The two battery packs are charged in parallel. It takes approximately 5 hours (for Standard Models) or 8 hours (for Expansion Unit Models) to fully charge the two battery packs. CAUTION: After the computer has been fully recharged, do not immediately disconnect and reconnect the AC adapter to charge it again. Doing so may damage the battery. 40 Initializing the Battery Pack You need to initialize a new battery pack before using it for the first time or when the actual operating time of a battery pack is much less than expected. Initializing is the process of fully charging, discharging, and then charging. It can take several hours. The G-Manager program provides a tool called Battery Recalibration for the purpose. (See G-Manager in Chapter 6.) Checking the Battery Level NOTE: Any battery level indication is an estimated result. The actual operating time can be different from the estimated time, depending on how you are using the computer. The operating time of a fully charged battery pack depends on how you are using the computer. When your applications often access peripherals, you will experience a shorter operating time. The two battery packs are discharged in parallel. By Operating System You can find the battery icon on the Windows taskbar (lower-right corner). The icon shows the approximate battery level. By Gas Gauge On the exterior side of the battery pack is a gas gauge for displaying the estimated battery charge. 41 Push-button When the battery pack is not installed in the computer and you want to know the battery charge, you can press the push-button to see the number of LEDs that light up. Each LED represents 20% charge. Battery Low Signals and Actions The battery icon changes appearance to display the current state of the battery. Battery Icon Battery Level Description Discharging The icon shows the charge remaining in 10-percent increments until the charge reaches the low-battery level. The battery charge has reached the low-battery level. Low Critically low The battery charge has reached the critical battery level. By default, Windows will display a notification and put your computer into Hibernation. When the battery is low, the computers Battery Indicator ( ) also blinks red to alert you to take actions. Always respond to low-battery by connecting the AC adapter, placing your computer in Hibernation mode, or turning off the computer. 42 Replacing the Battery Pack CAUTION:

There is danger of explosion if the battery is incorrectly replaced. Replace the battery only with the computer manufacturers optional battery packs. Discard used batteries according to the dealers instructions. Do not attempt to disassemble the battery pack. NOTE: The illustrations show the Standard model as the example. The removal and installation method for the Expansion Unit model is the same. 1. Turn off the computer and disconnect the AC adapter. Skip this step if you are hot swapping the battery pack. 2. Carefully place the computer upside down. 3. Locate the battery pack you want to remove (

or

). 4. Slide the battery latch toward the right () and then upwards () to release the battery pack. 5. Remove the battery pack from its compartment. 43 6. Fit another battery pack into place. With the battery pack correctly oriented, attach its connector side to the battery compartment at an angle () and then press down the other side (). 7. Slide the battery latch toward the locked position ( ). CAUTION: Make sure the battery latch is correctly locked, not revealing the underneath red part. Correct Incorrect (revealing red part) 44 Power-Saving Tips Aside from enabling your computers power saving mode, you can do your part to maximize the batterys operating time by following these suggestions. Do not disable Power Management. Decrease the LCD brightness to the lowest comfortable level. Shorten the length of time before Windows turn off the display. When not using a connected device, disconnect it. Turn off the wireless radio if you are not using the wireless module (such as WLAN, Bluetooth, or WWAN). Turn off the computer when you are not using it. 45 Chapter 4 Expanding Your Computer You can expand the capabilities of your computer by connecting other peripheral devices. When using a device, be sure to read the instructions accompanying the device together with the relevant section in this chapter. 46 Connecting Peripheral Devices Connecting a USB Device NOTE: USB 3.1port is backward compatible with USB 2.0 port. However, if necessary, you can set the USB 3.1 port to be a USB 2.0 port in the BIOS Setup Utility. Go to the utility, select Advanced Device Configuration, find the setting item, and change the setting to USB 2.0. USB Type-A Your computer has two USB 3.1 Gen 2 ports for connecting USB devices, such as a digital camera, scanner, printer, and mouse. USB 3.1 Gen 2 supports a transfer rate up to 10 Gbit/s. USB Type-C (Optional) Select models have a USB 3.1 Gen 2 Type-C port. USB Type-C (or simply USB-C) is a physical USB connector format that features small size and free orientation. This port supports:

USB 3.1 Gen 2 (up to 10 Gbps) DisplayPort over USB-C USB Power Delivery Note that you should use the appropriate wattage/voltage USB-C power adapter for your specific computer model. 47 For default models: 57W or above (19-20V, 3A or above) For models with Discrete GPU: 95W or above (19-20V, 5A or above) NOTE: You can still connect a USB device that has traditional connector types to the USB-C connector as long as you have a proper adapter. Connecting a Device for USB Charging Your computer has a PowerShare USB port (

). You can use this port to charge mobile devices even when the computer is in power-off, sleep, or hibernation state. A connected device is charged by either external power (if the AC adapter is connected) or by the computers battery (if the AC adapter is not connected). In the latter case, charging will stop when the battery level gets low (20% capacity). Notes and Cautions on USB Charging To use the USB charging feature, you must first enable the feature by running the BIOS Setup program or the G-Manager program. (See Advanced Menu in Chapter 5 or G-Manager in Chapter 6.) Otherwise the PowerShare USB port functions as a standard USB 2.0 port. Before connecting a device for charging, make sure the device works with the USB charging feature. 48 Connect a device directly to this port. Do not connect via a USB hub. After resuming from sleep or hibernation, the computer may not detect the connected device. If this happens, try disconnecting and reconnecting the cable. USB charging will stop in the following situations. You shut down the computer by pressing the power button for more than 5 seconds All power (AC adapter and battery pack) is disconnected and then reconnected during power-off state. For USB devices which do not require charging, connect them to other USB ports on your computer. Connecting a Monitor Your computer has an HDMI connector. HDMI (High-Definition Multimedia Interface) is an audio/video interface that transmits uncompressed digital data and therefore delivers true HD quality. Select models have a VGA connector. Select models have a DisplayPort connector. 49 The connected device should respond by default. If not, you can switch the display output by pressing the Fn+F5 hot keys. (You can also change the display through Windows Control Panel.) Connecting a Serial Device Your computer has a serial port for connecting a serial device. (The location of depends on your model.) or Select Expansion Unit models have a serial port. 50 Connecting an Audio Device The audio combo connector is the 4-pole TRRS 3.5mm type so you can connect a compatible headset microphone. SAFETY WARNING:

To prevent possible hearing damage, do not listen at high volume levels for long periods. 51 Using Storage and Expansion Cards Using Storage Cards Your computer has a storage card reader. The card reader is a small drive for reading from and writing to removable storage cards (or called memory cards). The reader supports SD (Secure Digital) and SDXC (Secure Digital eXtended Capacity) cards. To insert a storage card:

1. Locate the storage card reader and open the protective cover. 2. Align the card with its connector pointing to the slot and its label facing up. Slide the card into the slot until it reaches the end. 4. Windows will detect the card and assign it a drive name. 3. Close the cover. To remove a storage card:

1. Open the cover. 2. Select File Explorer and select Computer. 3. Right-click the drive with the card and select Eject. 4. Slightly push the card to release and then pull it out of the slot. 5. Close the cover. 52 Using Smart Cards Your computer has a smart card reader. With an embedded microcontroller, smart cards have the unique ability to store large amounts of data, carry out their own on-card functions (e.g., encryption and mutual authentication), and interact intelligently with a smart card reader. To insert a smart card:

1. Locate the smart card slot and open the protective cover. 2. Slide the smart card, with its label and embedded computer chip facing up into the slot. 3. Close the cover. To remove a smart card:

1. Open the cover. card. 3. Pull the card out of the slot. 4. Close the cover. 2. Make sure that the third-party smart card software is not accessing the smart 53 Using ExpressCards (Select Models Only) Select Expansion Unit models have an ExpressCard slot. The ExpressCard slot can accommodate a 54 mm (ExpressCard/54) or 34 mm

(ExpressCard/34) wide ExpressCard. To insert an ExpressCard:

1. Locate the ExpressCard slot and open the protective cover. 2. Slide the ExpressCard, with its label facing up, all the way into the slot until the rear connectors click into place. 3. Close the cover. To remove an ExpressCard:

1. Open the cover. 2. Double-click the Safely Remove Hardware icon found on the Windows taskbar and the Safely Remove Hardware window appears on screen. 3. Select (highlight) the ExpressCard from the list to disable the card. 4. Slightly push the card to release and then pull it out of the slot. 5. Close the cover. 54 Using PC Cards (Select Models Only) Select Expansion Unit models have a PC Card slot. The PC Card slot supports type II card and CardBus specifications. To insert a PC Card:

1. Locate the PC Card slot and open the protective cover. 2. Slide the PC Card, with its label facing up, into the slot until the eject button pops out. Eject button 3. Close the cover. To remove a PC Card:

1. Open the cover. 2. Double-click the Safely Remove Hardware icon found on the Windows taskbar and the Safely Remove Hardware window appears on screen. 3. Select (highlight) the PC Card from the list to disable the card. 4. Push the eject button and the card will slide out slightly. 5. Pull the card out of the slot. 55 6. Close the cover. 56 Expanding or Replacing Installing the SSD 1. Turn off the computer and disconnect the AC adapter. 2. Locate the SSD and open the protective cover. 3. Skip this step if you are expanding your computer from one SSD to two SSDs. If you are replacing an existing SSD, pry the rubber strip () of the SSD

(SSD 1 or SSD 2) to release the strip, and, using the rubber strip, pull the SSD canister out of the slot (). 4. Noting the orientation, insert the SSD canister all the way into the slot. 5. Make sure the rubber strip is engaged. 57 Chapter 5 Using BIOS Setup BIOS Setup Utility is a program for configuring the BIOS (Basic Input/ Output System) settings of the computer. BIOS is a layer of software, called firmware, that translates instructions from other layers of software into instructions that the computer hardware can understand. The BIOS settings are needed by your computer to identify the types of installed devices and establish special features. This chapter tells you how to use the BIOS Setup Utility. 58 When and How to Use You need to run BIOS Setup Utility when:

You see an error message on the screen requesting you to run BIOS Setup Utility. You want to restore the factory default BIOS settings. You want to modify some specific settings according to the hardware. You want to modify some specific settings to optimize the system performance. To run BIOS Setup Utility, click Under Advanced startup, click Restart now. In the boot options menu, click Troubleshoot Advanced options UEFI Firmware Settings. Click Restart. In the next menu that appears, use the arrow key to select Setup Utility and press Enter. Settings Update & Security Recovery. The BIOS Setup Utility main screen appears. In general, you can use the arrow keys to move around and F5/F6 keys to change the setup values. Keyboard information can be found at the bottom of the screen. NOTE:

The actual setting items on your model may differ from those described in this The availability of some setting items depends on the Windows version your chapter. computer is running. 59 Menu Descriptions Information Menu The Information menu contains the basic configuration information of the system. There are no user-definable items in this menu. NOTE: The Asset Tag information appears when you have entered the asset number for this computer using the asset management program. The program is provided in the Asset tag folder of the Driver disc. Main Menu The Main menu contains the various system settings. System Date sets the system date. System Time sets the system time. Boot Priority determines the first device that the system boots from. Select Legacy First or UEFI First according to your needs. Legacy USB Support enables or disables the systems support for Legacy USB device in DOS mode. CSM Support enables or disables CSM (Compatibility Support Mode). You can set this item to Yes for backward compatibility with legacy BIOS services. PXE Boot sets the PXE boot to UEFI or Legacy. PXE (Preboot eXecution Environment) is an environment to boot computers using a network interface independently of data storage devices or installed operating systems. Internal Numlock sets if the Num Lock function of the built-in keyboard can work. When set to Enabled, you can press Fn + Num LK to activate the numeric keypad, which is embedded in the typewriter keys. When set to Disabled, Num Lock does not work. In this case, you can still press Fn + a letter key to enter a number. 60 Advanced Menu The Advanced menu contains the advanced settings. Wake Up Capability specifies events for waking up the system from S3 (Sleep) state. Any Key Wakeup From S3 State allows any key to wake up the system from S3

(Sleep) state. USB Wake Up From S3 allow a USB device activity to wake up the system from S3 (Sleep) state. System Policy sets the system performance. When set to Performance, the CPU always runs at full speed. When set to Balance, the CPU speed changes according to the current workload, therefore balancing between performance and power consumption. AC Initiation sets if connecting AC power will automatically start or resume the system. USB Power-off Charging (PowerShare USB) enables or disables the USB charging feature of the PowerShare USB port. When disabled, the PowerShare USB port functions as a standard USB 2.0 port. For detailed information on the PowerShare USB port, see Connecting a Device for USB Charging in Chapter 4 MAC Address Pass Through allows the system specific MAC address to pass through a connected dock, meaning the dock specific MAC address will be overridden by the system specific MAC address. This feature only works for UEFI PXE boot. Active Management Technology Support (This item appears only on models supporting vPro.) Intel AMT Support enables or disables Intel Active Management Technology BIOS extension execution. AMT allows the system administrator to access an AMT featured computer remotely. Intel AMT Setup Prompt determines whether the prompt for entering Intel AMT Setup appears or not during POST. (This item only appears when the previous item is set to Enabled.) USB Provisioning of AMT enables or disables the use of a USB key for provisioning Intel AMT. 61 Virtualization Technology Setup sets Virtualization Technology parameters. Intel(R) Virtualization Technology enables or disables Intel VT (Intel Virtualization Technology) feature which provides hardware support for processor virtualization. When enabled, a VMM (Virtual Machine Monitor) can utilize the additional hardware virtualization capabilities provided by this technology. Intel(R) VT for Directed I/O (VT-d) enables or disables VT-d (Intel Virtualization Technology for Directed I/O). When enabled, VT-d helps enhance Intel platforms for efficient virtualization of I/O devices. SW Guard Extensions (SGX) can be set to Disabled, Enabled, or Software Controlled. Intel Software Guard Extensions (Intel SGX) is an Intel technology for increasing the security of application code. It is used by application developers. Device Configuration enables or disables several hardware components. The items available for setting depend on your model. Diagnostics and System Tester H2ODST Tool performs system baseline check. Recovery Partition allows you to restore your Windows 10 system to the factory default state by using the recovery partition feature. Recovery partition is a portion of your hard disk drive that is set aside by the manufacturer to hold the original image of your system. WARNING:

Using this feature will reinstall Windows to your system and configure it to the systems factory default settings. All data on the hard disk drive will be lost. Make sure that power is not interrupted during the recovery process. An unsuccessful recovery may result in Windows startup problems. Windows RE launches Windows Recovery Environment. Windows RE (Windows Recovery Environment) is a recovery environment that provides recovery, repair, and troubleshooting tools in Windows 10. 62 Security Menu The Security menu contains the security settings, which safeguard your system against unauthorized use. NOTE:

You can set the user password only when the supervisor password has been set. If both the administrator and user passwords are set, you can enter any of them for starting up the system and/or entering BIOS Setup. However, the user password only allows you to view/change the settings of certain items. A password setting is applied right after it is confirmed. To cancel a password, leave the password empty by pressing the Enter key. Set Supervisor/User Password sets the supervisor/user password. You can set the supervisor/user password to be required for starting up the system and/or entering BIOS Setup. Strong Password enables or disables strong password. When enabled, the password you set must contain at least one upper-case letter, one lower-case letter, and one digit. Password Configuration sets the minimum password length. Enter the number in the input field and select [Yes]. The number should be between 4 and 64. Password on Boot allows you to enable or disable the entering of password for booting up your system. Secure Boot Configuration You can access this item only after setting the Supervisor Password. Secure Boot enables or disables Secure Boot. Secure Boot is a feature that helps prevent unauthorized firmware, operating systems, or UEFI drivers from running at boot time. Delete all Security Boot Keys deletes all secure boot variables. Restore Factory Defaults resets secure boot variables to manufacturing defaults. Set SSD 1/ SSD 2 User Password sets the password for locking the hard disk drive

(i.e. SSD on your computer model). After setting a password, the hard disk drive can only be unlocked by the password no matter where it is installed. 63 NOTE: The item Set SSD 2 User Password appears only when your model has the SSD 2. Security Freeze Lock enables or disables the Security Freeze Lock function. This function is only applicable to SATA drives in AHCI mode. It prevents attacks on the SATA drive by freezing the security state of the drive at POST and also when the system resumes from S3. TPM Setup Menu sets various TPM parameters. TPM Support enables or disables TPM support. TPM (Trusted Platform Module) is a component on your computers mainboard that is specifically designed to enhance platform security by providing a protected space for key operations and other security critical tasks. Change TPM State allows you to select between No Operation and Clear. Intel Trusted Execution Technology enables utilization of additional hardware capabilities provided by Intel Trusted Execution Technology. Boot Menu The Boot menu sets the sequence of the devices to be searched for the operating system. Press the arrow key to select a device on the boot order list and then press +/

key to change the order of the selected device. The [X] sign after a device name means the device is included in the search. To exclude a device from the search, move to the [X] sign of the device and press Enter. Exit Menu The Exit menu displays ways of exiting BIOS Setup Utility. After finishing with your settings, you must save and exit so that the changes can take effect. Exit Saving Changes saves the changes you have made and exits BIOS Setup Utility. 64 Exit Discarding Changes exits BIOS Setup Utility without saving the changes you have made. Load Setup Defaults loads the factory default values for all the items. Discard Changes restores the previous values for all the items. Saves Changes saves the changes you have made. 65 Chapter 6 Using Getac Software Getac software includes application programs for specific computer components and utility programs for overall management. This chapter briefly introduces the programs. 66 G-Manager G-Manager allows you to view, manage, and configure several system functions and features. The G-Manager home menu presents four categories. Select a category name to open it. For detailed information, see the programs online help. Select About Help. 67 Chapter 7 Care and Maintenance Taking good care of your computer will ensure a trouble-free operation and reduce the risk of damage to your computer. This chapter gives you guidelines covering areas such as protecting, storing, cleaning, and traveling. 68 Protecting the Computer To safeguard the integrity of your computer data as well as the computer itself, you can protect the computer in several ways as described in this section. Using an Anti-Virus Strategy You can install a virus-detecting program to monitor potential viruses that could damage your files. Using the Cable Lock You can use a Kensington-type cable lock to protect your computer against theft. The cable lock is available in most computer stores. To use the lock, loop the lock cable around a stationary object such as a table. Insert the lock to the Kensington lock hole and turn the key to secure the lock. Store the key in a safe place. 69 Taking Care of the Computer Location Guidelines For optimal performance, use the computer where the recommended temperature is between 0 C (32 F) and 55 C (131 F). (Actual operating temperature depends on product specifications.) Avoid placing the computer in a location subject to high humidity, extreme temperatures, mechanical vibration, direct sunlight, or heavy dust. Using the computer in extreme environments for long periods can result in product deterioration and a shortened product life. Operating in an environment with metallic dust is not allowed. Place the computer on a flat and steady surface. Do not stand the computer on its side or store it in an upside-down position. A strong impact by dropping or hitting may damage the computer. Do not cover or block any ventilation openings on the computer. For example, do not place the computer on a bed, sofa, rug, or other similar surface. Otherwise, overheating may occur that results in damage to the computer. As the computer can become very hot during operation, keep it away from objects that are vulnerable to heat. Keep the computer at least 13 cm (5 inches) away from electrical appliances that can generate a strong magnetic field such as a TV, refrigerator, motor, or a large audio speaker. Avoid moving the computer abruptly from a cold to a warm place. A temperature difference of more than 10 C (18 F) may cause condensation inside the unit, which may damage the storage media. Do not place heavy objects on top of the computer when it is closed as this General Guidelines may damage the display. 70 Do not move the computer simply by grasping the display screen. To avoid damaging the screen, do not touch it with any sharp object. LCD image sticking occurs when a fixed pattern is displayed on the screen for a prolonged period of time. You can avoid the problem by limiting the amount of static content on the display. It is recommended that you use a screen saver or turn off the display when it is not in use. To maximize the life of the backlight in the display, allow the backlight to automatically turn off as a result of power management. Cleaning Guidelines Never clean the computer with its power on. Use a soft cloth moistened with water or a non-alkaline detergent to wipe the exterior of the computer. Gently wipe the display with a soft, lint-free cloth. Dust or grease on the touchpad can affect its sensitivity. Clean the pad by using adhesive tape to remove the dust and grease on its surface. If water or liquid is split onto the computer, wipe it dry and clean when possible. Though your computer is water-proof, do not leave the computer wet when you can dry it. If the computer gets wet where the temperature is 0C (32F) or below, freeze damage may occur. Make sure to dry the wet computer. Battery Pack Guidelines Recharge the battery pack when it is nearly discharged. When recharging, make sure that the battery pack is fully charged. Doing so may avoid harm to the battery pack. The battery pack is a consumable product and the following conditions will shorten its life:

71 when frequently charging the battery pack when using, charging, or storing in high temperature condition To avoid hastening the deterioration of the battery pack thereby prolonging its useful life, minimize the number of times you charge it so as not to frequently increase its internal temperature. Charge the battery pack between 10 C ~ 30 C (50 F ~ 86 F) temperature range. A higher environment temperature will cause the battery packs temperature to rise. Avoid charging the battery pack inside a closed vehicle and in hot weather condition. Also, charging will not start if the battery pack is not within the allowed temperature range. It is recommended that you do not charge the battery pack more than once a day. It is recommended that you charge the battery pack with the computers power off. To maintain the battery packs operating efficiency, store it in a cool dark place removed from the computer and with 30 % ~ 40 % charge remaining. Important guidelines when using the battery pack. When installing or removing the battery pack take note of the following:

avoid installing or removing the battery pack when the computer is in Sleep mode. Abruptly removing the battery pack may cause loss of data or the computer may become unstable. avoid touching the battery pack terminals or damage may occur, thereby causing improper operation to it or the computer. The computers input voltage and surrounding temperature will directly affect the battery packs charge and discharge time:

charging time will be prolonged when the computer is turned on. To shorten the charging time, it is recommended that you place the computer in sleep or hibernation mode. a low temperature will prolong the charging time as well as hasten the discharge time. 72 When using battery power in an extremely low temperature environment, you may experience shortened operating time and incorrect battery level reading. This phenomenon comes from the chemical characteristics of batteries. The appropriate operating temperature for the battery is -10 C ~ 50 C (14 F ~ 122 F). Do not leave the battery pack in storage for more than six months without recharging it. Touchscreen Guidelines Use the finger or stylus on the display. Using a sharp or metallic object other than your finger or stylus may cause scratches and damage the display, thereby causing errors. Use a soft cloth to remove dirt on the display. The touchscreen surface has a special protective coating that prevents dirt from sticking to it. Not using a soft cloth may cause damage to the special protective coating on the touchscreen surface. Turn off the computer power when cleaning the display. Cleaning the display with the power on may cause improper operation. Do not use excessive force on the display. Avoid placing objects on top of the display as this may cause the glass to break thereby damaging the display. In low and high temperatures (below 5 oC / 41 F and above 60 oC / 140 F), the touchscreen may have a slower response time or register the touch in the wrong location. It will go back to normal after returning to room temperature. When there is noticeable discrepancy in the operation of the touchscreen function

(wrong location on intended operation or improper display resolution), refer to the Windows online Help for instructions on recalibrating the touchscreen display. 73 When Traveling Before traveling with your computer, make a backup of your hard disk data into flash disks or other storage devices. As an added precaution, bring along an extra copy of your important data. Make sure that the battery pack is fully charged. Make sure that the computer is turned off and the top cover is securely closed. Make sure that all the connector covers are closed completely to ensure the waterproof integrity. Do not leave objects in between the keyboard and closed display. Disconnect the AC adapter from the computer and take it with you. Use the AC adapter as the power source and as a battery-charger. Hand-carry the computer. Do not check it in as luggage. If you need to leave the computer in the car, put it in the trunk of the car to avoid exposing the computer to excessive heat. When going through airport security, it is recommended that you send the computer and flash disks through the X-ray machine (the device you set your bags on). Avoid the magnetic detector (the device you walk through) or the magnetic wand (the handheld device used by security personnel). If you plan to travel abroad with your computer, consult your dealer for the appropriate AC power cord for use in your country of destination. 74 Chapter 8 Troubleshooting Computer problems can be caused by hardware, software, or both. When you encounter any problem, it might be a typical problem that can easily be solved. This chapter tells you what actions to take when solving common computer problems. 75 Preliminary Checklist Here are helpful hints to follow before you take further actions when you encounter any problem:

Try to isolate which part of the computer is causing the problem. Make sure that you turn on all peripheral devices before turning on the computer. If an external device has a problem, make sure that the cable connections are correct and secure. Make sure that the configuration information is properly set in the BIOS Setup program. Make sure that all the device drivers are correctly installed. Make notes of your observations. Are there any messages on the screen? Do any indicators light? Do you hear any beeps? Detailed descriptions are useful to the service personnel when you need to consult one for assistance. If any problem persists after you follow the instructions in this chapter, contact an authorized dealer for help. 76 Solving Common Problems Battery Problems The battery does not charge (Battery Charge indicator does not light amber). Make sure that the AC adapter is properly connected. Make sure that the battery is not too hot or cold. Allow time for the battery pack to return to room temperature. If the battery doesn't charge after it has been stored in very low temperatures, try disconnecting and reconnecting the AC adapter to solve the problem. Make sure that the battery pack is installed correctly. Make sure that the battery terminals are clean. The operating time of a fully charged battery becomes shorter. If you often partially recharge and discharge, the battery might not be charged to its full potential. Initialize the battery to solve the problem. The battery operating time indicated by the battery meter does not match the actual operating time. The actual operating time can be different from the estimated time, depending on how you are using the computer. If the actual operating time is much less than the estimated time, initialize the battery. Bluetooth Problems I cannot connect to another Bluetooth-enabled device. Make sure that both devices have activated Bluetooth feature. Make sure that the distance between the two devices is within the limit and that there are no walls or other obstructions between the devices. Make sure that the other device is not in Hidden mode. 77 Make sure that both devices are compatible. Display Problems Nothing appears on the screen. During operation, the screen may automatically turn off as a result of power management. Press any key to see if the screen comes back. The brightness level might be too low. Increase brightness. The display output might be set to an external device. To switch the display back to the LCD, press the Fn+F5 hot key or change the display through the Display Settings Properties. The characters on the screen are dim. Adjust the brightness and/or contrast. The display brightness cannot be increased. As a protection, the display brightness will be fixed at a low level when the surrounding temperature is too high or too low. It is not a malfunction in this situation. Bad dots appear on the display at all times. A small number of missing, discolored, or bright dots on the screen are an intrinsic characteristic of TFT LCD technology. It is not regarded as an LCD defect. DVD Drive Problems The DVD drive cannot read a disc. up. Make sure that the disc is correctly seated in the tray, with the label facing Make sure that the disc is not dirty. Clean the disc with a disc cleaning kit, available in most computer stores. 78 Make sure that the computer supports the disc or the files contained. You cannot eject a disc. The disc is not properly seated in the drive. Manually release the disc by inserting a small rod, such as a straightened paperclip, into the drives manual eject hole and pushing firmly to release the tray. Fingerprint Scanner Problems The following message appears during the fingerprint enrollment process Your device is having trouble recognizing you. Make sure your sensor is clean. When enrolling a fingerprint, make sure you move your finger slightly between each reading. Not moving or moving too much can both result in fingerprint reading failures. The following message appears during the fingerprint login process Couldnt recognize that fingerprint. Make sure youve set up your fingerprint in Windows Hello. When placing your finger on the scanner, make sure your finger aims at the center of the scanner surface and covers as much area as possible. If a fingerprint login frequently fails, try enrolling again. Hardware Device Problems The computer does not recognize a newly installed device. The device may not be correctly configured in the BIOS Setup program. Run the BIOS Setup program to identify the new type. Make sure if any device driver needs to be installed. (Refer to the documentation that came with the device.) 79 Check the cables or power cords for correct connections. For an external device that has its own power switch, make sure that the power is turned on. Hard Disk Drive Problems NOTE: The term hard disk drive throughout this manual refers generally to the mass storage device in your computer. The hard disk drive error message appears on the screen. The hard disk drive has defects. Ask your dealer for help. The hard disk drive operations seem slow. The data files stored on the hard disk drive may be fragmented. Defragment the drive. (See Windows online help for instructions.). The hard disk drive in-use indicator glows without blinking. The data files stored on the hard disk drive may be fragmented. Defragment the drive. (See Windows online help for instructions.). Keyboard and Touchpad Problems The keyboard does not respond. Try connecting an external keyboard. If it works, contact an authorized dealer, as the internal keyboard cable might be loose. Water or liquid is spilt into the keyboard. Immediately turn off the computer and unplug the AC adapter. Then turn the keyboard upside down to drain the liquid out of the keyboard. Make sure to clean up any part of the spill you can get to. Though the keyboard of your computer is spill-proof, liquid will remain in the keyboard enclosure if you dont remove it. Wait for the keyboard to air dry before using the computer again. 80 The touchpad does not work, or the pointer is difficult to control with the touchpad. Make sure that the touchpad is clean. LAN Problems I cannot access the network. the network hub. Make sure that the LAN cable is properly connected to the RJ45 connector and Make sure that the network configuration is appropriate. Make sure that the user name or password is correct. Power Management Problems The computer does not enter Sleep or Hibernation mode automatically. If you have a connection to another computer, the computer does not enter Sleep or Hibernation mode if the connection is actively in use. Make sure that the Sleep or Hibernation time-out is enabled. The computer does not enter Sleep or Hibernation mode immediately. If the computer is performing an operation, it normally waits for the operation to finish. The computer does not resume from Sleep or Hibernation mode. The computer automatically enters Sleep or Hibernation mode when the battery pack is empty. Do any one of the following:

Connect the AC adapter to the computer. Replace the empty battery pack with a fully charged one. 81 Software Problems An application program does not work correctly. Make sure that the software is correctly installed. If an error message appears on the screen, consult the software programs documentation for further information. If you are sure the operation has stop, reset the computer. Sound Problems No sound is produced. Make sure that the volume control is not set too low. Make sure that the computer is not in Sleep mode. If using an external speaker, make sure that the speaker is properly connected. Distorted sound is produced. Make sure that the volume control is not set too high or too low. In most cases, a high setting can cause the audio electronics to distort the sound. The sound system does not record. Adjust the playback or recording sound levels. Startup Problems When you turn on the computer, it does not seem to respond. If you are using an external AC power, make sure that the AC adapter is correctly and securely connected. If so, make sure that the electrical outlet works properly. If you are using the battery power, make sure that the battery is not discharged. When the ambient temperature is below -20 C (-4 F), the computer will start up only if both battery packs are installed. 82 WLAN Problems I cannot use the WLAN feature. Transmission quality is poor. as described next. Radio interference exists. Make sure that the WLAN feature is turned on. Your computer may be in an out-of-range situation. Move your computer closer to the Access Point or another WLAN device it is associated with. Check if there is high interference around the environment and solve the problem Move your computer away from the device causing the radio interference such as microwave oven and large metal objects. Plug your computer into an outlet on a different branch circuit from that used by the affecting device. Consult your dealer or an experienced radio technician for help. I cannot connect to another WLAN device. Make sure that the WLAN feature is turned on. Make sure that the SSID setting is the same for every WLAN device in the network. Your computer is not recognizing changes. Restart the computer. Make sure that the IP address or subnet mask setting is correct. I cannot communicate with the computer in the network when Infrastructure mode is configured. Make sure that the Access Point your computer is associated with is powered on and all the LEDs are working properly. If the operating radio channel is in poor quality, change the Access Point and all the wireless station(s) within the BSSID to another radio channel. 83 Your computer may be in an out-of-range situation. Move your computer closer to the Access Point it is associated with. Make sure that your computer is configured with the same security option

(encryption) to the Access Point. Use the Web Manager/Telnet of the Access Point to check whether it is connected to the network. Reconfigure and reset the Access Point. I cannot access the network. Make sure that the network configuration is appropriate. Make sure that the user name or password is correct. You have moved out of range of the network. Turn off power management. Other Problems The date/time is incorrect. Correct the date and time via the operating system or BIOS Setup program. After you have performed everything as described above and still have the incorrect date and time every time you turn on the computer, the RTC

(Real-Time Clock) battery is at the end of its life. Call an authorized dealer to replace the RTC battery. GPS signals drop when they are not supposed to. If your computer is connected to the docking station which has one or more USB 3.1/3.0 devices connected, the USB 3.1/3.0 device can interfere with the radio frequency, causing poor GPS signal reception. To solve the problem in this situation, run the BIOS Setup Utility, go to Advanced Device Configuration Docking USB Port Setting and change the setting to USB 2.0. 84 Resetting the Computer You may have to reset (reboot) your computer on some occasions when an error occurs and the program you are using hangs up. If you are sure the operation has stopped and you cannot use the restart function of the operating system, reset the computer Reset the computer by any of these methods:

Press Ctrl+Alt+Del on the keyboard. This opens the Ctrl-Alt-Del screen where you can select actions including Restart. If the above action does not work, press and hold the power button for more than 5 seconds to force the system to turn off. Then turn on the power again. 85 System Recovery Using Windows RE Windows 10 has a recovery environment (Windows RE) that provides recovery, repair, and troubleshooting tools. The tools are referred to as Advanced Startup Options. You can access these options by selecting There are several choices:

Settings Update & security. System Restore This option allows you to restore Windows to an earlier point in time if you have created a restore point. Recover from a drive If you have created a recovery drive on Windows 10, you can use the recovery drive to reinstall Windows. Reset this PC This option allows you to reinstall Windows with or without keeping your files. See Microsoft website for more information. NOTE:

If you are in a situation where your computer wont boot into Windows, you can access the Advanced Startup Options by running the BIOS Setup Utility and selecting Advanced Windows RE. System recovery for Windows 10 typically will take several hours to complete. 86 Using Recovery Partition When necessary, you can restore your Windows 10 system to the factory default state by using the recovery partition feature. Recovery partition is a portion of your hard disk drive (i.e. SSD on your computer model) that is set aside by the manufacturer to hold the original image of your system. WARNING:

Using this feature will reinstall Windows to your system and configure it to the systems factory default settings. All data on the hard disk drive will be lost. Make sure that power is not interrupted during the recovery process. An unsuccessful recovery may result in Windows startup problems. To restore your system to the factory default state:

1. Connect the AC adapter. 5 for more information.) 2. Run BIOS Setup Utility. Select Advanced Recovery Partition. (See Chapter 3. Follow the onscreen instructions to complete the process. 87 Using the Driver Disc (Optional) NOTE: You can download the latest drivers and utilities from Getac website at http://www.getac.com Support. The Driver disc contains drivers and utilities required for specific hardware in your computer. Since your computer comes with drivers and utilities pre-installed, you normally do not need to use the Driver disc. In case you want to manually install Windows, you will have to install the drivers and utilities one by one after installing Windows. To manually install drivers and utilities:

1. Start up the computer. 2. Skip this step if your model has a DVD drive. Prepare an external CD/DVD drive (with USB connection). Connect the drive to your computer. Wait for the computer to recognize the drive. 3. Insert the Driver disc. Make sure you use the disc that matches the Windows version of your computer. 4. The autorun program should automatically start. You will see the installation menu. Click NEXT to go to the next page if there is more than one. 5. To install a driver or utility, just click the particular button and follow the onscreen instructions to complete the installation. 88 Appendix A Specifications NOTE: Specifications are subject to change without any prior notice. Parts CPU Specifications Comet Lake U Platform

- Intel Core i5-10210U, 1.6GHz up to 4.2GHz, 6M cache

- Intel Core i5-10310U, 1.6GHz up to 4.4GHz, 6M cache

- Intel Core i7-10510U, 1.8GHz up to 4.9GHz, 8M cache

- Intel Core i7-10610U, 1.8GHz up to 4.9GHz, 8M cache

- Intel Core i7-10710U, 1.1GHz up to 4.7GHz, 12M cache BIOS RAM Insyde, 32MB flash EEPROM, UEFI, supporting TPM, vPro, NIST, Computrace, self-diagnostics, Smart card security, AND Asset Tag 8/16/32GB DDR4 SO-DIMM x 2, 2666MHz Display Panel 13.3-inch (16:9) wide TFT LCD, 1920x1080 FHD, dimmer mode, blackout mode, capacitive multi-touch - 10 point (option) Controller UMA - Intel UHD Graphics 620 Option: Nvidia GTX1050 MXM card (for models with discrete GPU) Audio Features High Definition audio Microphone Integrated x 2, Mic Array Speaker Speaker 2 Keyboard Standard keys with numeric pad keys, 12 function keys, special Fn (Function) key and Windows keys, with backlight Pointing device Glide touchpad with multi-touch feature, capacitive type SSD (solid-state drive) SATA III or PCIe (option) interface, M.2 2280 form factor, 256GB/512GB/1TB Up to two SSDs (SSD 1 and SSD 2) can be installed, with SSD 1 as the C: drive containing the operating system SATA interface, Super-Multi DVD drive or Blu-ray DVD drive (option) Optical disc drive

(Expansion Unit models only) 89 Parts Card slots Specifications SD/SDXC Smart Card ExpressCard/54 or PC Card (Expansion Unit models only)) I/O ports Standard USB 3.1 Gen 2, PowerShare USB 2.0, RJ45, HDMI 1.4, combo audio

(4-pole TRRS 3.5mm type), docking, tri antenna pass-through Configurable I/O options Left/right configuration: VGA/RS-232, RS-232/DisplayPort, or RS-232/

USB-C Optional Second RS-232 (Expansion Unit models only)) LAN Intel i219-LM Gigabit Network Connection Wireless LAN + Bluetooth Intel Wi-Fi 6 AX200 + Bluetooth 5.0 combo GPS (option) UART WWAN (option) 3G/4G LTE, external accessible SIM card slot WCDMA 1/ LTE Band 1 / Band 3/Band 7/Band 8 /Band 41 Camera (option) FHD Webcam, IR sensor (option) Barcode scanner (option) 1D and 2D RFID reader (option) USB interface, contactless, supporting HF (13.56 MHz) Security Kensington lock TPM 2.0 Fingerprint scanner (option) Power AC adapter Universal AC adapter, 90 W or 120 W (for models with discrete GPU), input: 100-240 VAC, output: 19 V Battery pack x 2 Standard model: Lithium-ion Prismatic type, 6-cell, 11.1V, 2100mAh, 24WH Expansion Unit model: Lithium-ion Cylindrical type, 12-cell, 10.8V, 6900mAh, 75WH Dimension (WDH) Standard model: (336~342) x (238.6~276.6) x (28.2~32.2) mm Expansion Unit model: (336~342) x (238.6~276.6) x (45.2~48.2) mm Weight Standard model: 2.3 kg Expansion Unit model: 3.3 kg 90 Appendix B Regulatory Information This appendix provides regulatory statements and safety notices on your computer. NOTE: Marking labels located on the exterior of your computer indicate the regulations that your model complies with. Please check the marking labels and refer to the corresponding statements in this appendix. Some notices apply to specific models only. 91 On the Use of the System Class B Regulations USA NOTE:

Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacturer could void the users authority to operate the equipment. Please note:

The use of a non-shielded interface cable with this equipment is prohibited. 92 Canada Company name: Getac USA Address: 15495 Sand Canyon Rd., Suite 350 Irvine, CA 92618 USA Phone: 949-681-2900 Canadian Department of Communications Radio Interference Regulations Class B Compliance Notice This Class B digital apparatus meets all requirements of the Canada Interference-Causing equipment regulations. Cet appareil numrique de Classe B respecte toutes les exigences du Rglement Canadien sur le matriel brouileur. This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le prsent appareil numrique nmet pas de bruits radiolectriques dpassant les limites applicables aux appareils numriques de la classe B prescrites dans le Rglement sur le brouillage radiolectrique dict par le ministre des Communications du Canada. ANSI Warning Equipment approved for UL 121201/CSA C22.2 NO. 213, Nonincendive Electrical Equipment for use in Class 1, Division 2, Group A, B, C, and D. Maximum ambient temperature: 40C WARNING: To prevent ignition of a hazardous atmosphere, batteries must only be changed or charged in an area known to be non-hazardous. EXPLOSION HARZARD WARNING: External connections/hubs through the connectors as mentioned (USB connector, Ethernet connector, phone connector, VGA port, HDMI port, DP port, serial port, power supply connector, microphone jack, and headphones jack) are not to be used in a hazardous location. When used with a docking station (such as the office dock or vehicle dock), the docking/undocking of the equipment must be conducted outside the hazardous 93 area. Docking/undocking in a hazardous area is prohibited. Any external card

(such as the micro-SIM card and SD card) must not be removed or replaced while the circuit is live or unless the area is free of ignitable concentrations. Power adapter shall not be used in hazardous locations. Safety Notices About the Battery If the battery is mishandled, it may cause fire, smoke or an explosion and the batterys functionality will be seriously damaged. The safety instructions listed below must be followed. Danger Do not immerse the battery with liquid such as water, sea water or soda. Do not charge/discharge or place the battery in high-temperature (more than 80 C / 176 F) locations, such as near a fire, heater, in a car in direct sunlight, etc. Do not use unauthorized chargers. Do not force a reverse-charge or a reverse-connection. Do not connect the battery with AC plug (outlet) or car plugs. Do not adapt the battery to unspecified applications. Do not short circuit the battery. Do not drop or subject the battery to impacts. Do not penetrate with a nail or strike with a hammer. Do not directly solder the battery. Do not disassemble the battery. 94 Warning Keep the battery away from infants. Stop using the battery if there are noticeable abnormalities such as abnormal smell, heat, deformities, or discoloration. Stop charging if the charging process cannot be finished. In case of a leaking battery, keep the battery away from flames and do not touch it. Pack the battery tightly during transport. Caution Do not use the battery where static electricity (more than 100V) exists that might damage the protection circuit of the battery. When children are using the system, parents or adults must ensure that they are using the system and battery correctly. Keep the battery away from flammable materials during charging and discharging. In case lead wires or metal objects come out from the battery, you must seal and insulate them completely. Caution Texts Concerning Lithium Batteries DANISH ADVARSEL! Lithiumbatteri Eksplosionsfare ved fejlagtig hndtering. Udskiftning m kun ske med batteri af samme fabrikat og type. Levr det brugte batteri tilbage til leverandren. NORWEGIAN ADVARSEL: Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme batteritype eller en tilsvarende type anbefalt av apparatfabrikanten. Brukte batterier kasseres i henhold til fabrikantens instruksjoner. SWEDISH VARNING: Explosionsfara vid felaktigt batteribyte. Anvnd samma batterityp eller en 95 ekvivalent typ som rekommenderas av apparattillverkaren. Kassera anvnt batteri enligt fabrikantens instruktion. FINNISH VAROITUS: Paristo voi rjht, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan valmistajan suosittelemaan tyyppiin. Hvit kytetty paristo valmistajan ohjeiden mukaisesti. ENGLISH CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the equipment manufacturer. Discard used batteries according to manufacturer's instructions. DEUTSCH VORSICHT: Explosionsgefahr bei unsachgemem Austausch der Batterie. Ersatz nur durch denselben oder einen vom Hersteller empfohlenen gleich-wertigen Typ. Entsorgung gebrauchter Batterien nach Angaben des Herstellers. FRENCH ATTENTION: II y a danger dexplosion sil y a remplacement incorrect de la batterie. Remplacer uniquement avec une batterie du mme type ou dun type quivalent recommand par le constructeur. Mettre au rebut les batteries usages conformment aux instructions du fabricant. Attention (for USA Users) The product that you have purchased contains a rechargeable battery. The battery is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal. About the AC Adapter Use only the AC adapter supplied with your computer. Use of another type of AC adapter will result in malfunction and/or danger. Do not use the AC adapter in a high moisture environment. Never touch it when your hands or feet are wet. 96 Allow adequate ventilation around the AC adapter when using it to operate the device or charge the battery. Do not cover the AC adapter with paper or other objects that will reduce cooling. Do not use the AC adapter while it is inside a carrying case. Connect the adapter to a proper power source. The voltage requirements are found on the product case and/or packaging. Do not use the AC adapter if the cord becomes damaged. Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to excess moisture. Heat Related Concerns Your device may become very warm during normal use. It complies with the user-accessible surface temperature limits defined by the International Standards for Safety. Still, sustained contact with warm surfaces for long periods of time may cause discomfort or injury. To reduce potential heat-related concerns, follow these guidelines:

Keep your device and its AC adapter in a well-ventilated area when in use or charging. Allow for adequate air circulation under and around the device. Use common sense to avoid situations where your skin is in contact with your device or its AC adapter when its operating or connected to a power source. For example, dont sleep with your device or its AC adapter, or place it under a blanket or pillow, and avoid contact between your body and your device when the AC adapter is connected to a power source. Take special care if you have a physical condition that affects your ability to detect heat against the body. If your device is used for long periods, its surface can become very warm. While the temperature may not feel hot to the touch, if you maintain physical contact with the device for a long time, for example if you rest the device on your lap, your skin might suffer a low-heat injury. 97 If your device is on your lap and gets uncomfortably warm, remove it from your lap and place it on a stable work surface. Never place your device or AC adapter on furniture or any other surface that might be marred by exposure to heat since the base of your device and the surface of the AC adaptor may increase in temperature during normal use. 98 On the Use of the RF Device USA and Canada Safety Requirements and Notices IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radio Frequency Interference Requirements and SAR This device meets the governments requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. EMC Requirements This device uses, generates and radiates radio frequency energy. The radio frequency energy produced by this device is well below the maximum exposure allowed by the Federal Communications Commission (FCC). This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. The FCC limits are designed to provide reasonable protection against harmful interference when the equipment is installed and used in accordance with the instruction manual and operated in a commercial environment. However, there is no guarantee that interference will not occur in a particular commercial installation, or if operated in a residential area. 99 If harmful interference with radio or television reception occurs when the device is turned on, the user must correct the situation at the users own expense. The user is encouraged to try one or more of the following corrective measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION: The Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by the manufacturer could void the users authority to operate this device. Canada Radio Frequency Interference Requirements To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment

(or its transmit antenna) that is installed outdoors is subject to licensing. Pour empcher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit tre utilis l'intrieur et devrait tre plac loin des fentres afin de fournir un cran de blindage maximal. Si le matriel (ou son antenne d'mission) est install l'extrieur, il doit faire l'objet d'une licence. European Union CE Marking and Compliance Notices Statements of Compliance English This product follows the provisions of the European Directive 2014/53/EU. Danish Dette produkt er i overensstemmelse med det europiske direktiv 2014/53/EU. 100 Dutch Dit product is in navolging van de bepalingen van Europees Directief 2014/53/EU. Finnish Tm tuote noudattaa EU-direktiivin 2014/53/EU mryksi. French Ce produit est conforme aux exigences de la Directive Europenne 2014/53/EU. German Dieses Produkt entspricht den Bestimmungen der Europischen Richtlinie 2014/53/EU. Greek To 2014/53/EU. Icelandic essi vara stenst regluger Evrpska Efnahags Bandalagsins nmer 2014/53/EU. Italian Questo prodotto conforme alla Direttiva Europea 2014/53/EU. Norwegian Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 2014/53/EU. Portuguese Este produto cumpre com as normas da Diretiva Europia 2014/53/EU. Spanish Este producto cumple con las normas del Directivo Europeo 2014/53/EU. Swedish Denna produkt har tillverkats i enlighet med EG-direktiv 2014/53/EU. Notices CE Max power:

WLAN 2.4G: 16.5 dBm WLAN 5G: 17.14 dBm BT: 9.9 dBm WWAN: 31.73 dBm 101 The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range. AT EE IT PT BE FI LV RO BG FR LT SK HR DE LU SI CY EL MT ES CZ HU NL SE DK IE PL UK Waste Electrical and Electronic Equipment (WEEE) This symbol means that according to local laws and regulations your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. Proper recycling of your product will protect human health and the environment. 102 User Notification of Take-back Service To Institutional (B2B) Users in United States:

Getac believes in providing our institutional customers with easy-to-use solutions to recycle your Getac-brand products for free. Getac understands the institutional customers will likely be recycling multiple items at once and as such. Getac wants to make the recycling process for these larger shipments as streamlined as possible. Getac works with recycling vendors with the highest standards for protecting our environment, ensuring worker safety, and complying with global environmental laws. Our commitment to recycling our old equipment grows out of our work to protect the environment in many ways. Please see the product type below for information on Getac product, battery and packaging recycling in USA. For Product Recycling:

Your portable Getac products contain hazardous materials. While they pose no risk to you during normal use, they should never be disposed with other wastes. Getac provides a free take-back service for recycling your Getac products. Our electronics recycler will provide competitive bids for recycling non-Getac products as well. For Battery Recycling:

The batteries used to power your portable Getac products contain hazardous materials. While they pose no risk to you during normal use, they should never be disposed with other wastes. Getac provides a free take-back service for recycling your batteries from Getac products. For Packaging Recycling:

Getac has chosen the packaging materials used to transport our products carefully, to balance the requirements of shipping the product to you safely while minimizing the amount of material used. The materials used in our packaging are designed to be recycled locally. If you have the above for recycling, please visit our website https://us.getac.com/aboutgetac/environment.html 103 104 ENERGY STAR ENERGY STAR is a government program that offers businesses and consumers energy-efficient solutions, making it easy to save money while protecting the environment for future generations. Please reference ENERGY STAR related information from http://www.energystar.gov. As an ENERGY STAR Partner, Getac Technology Corporation has determined that this product meets the ENERGY STAR guidelines for energy efficiency. An ENERGY STAR qualified computer uses 70 % less electricity than computers without enabled power management features. Earning the ENERGY STAR When every home office is powered by equipment that has earned the ENERGY STAR, the change will keep over 289 billion pounds of greenhouse gases out of the air. If left inactive, ENERGY STAR qualified computers enter a low-power mode and may use 15 watts or less. New chip technologies make power management features more reliable, dependable, and user-friendly than even just a few years ago. Spending a large portion of time in low-power mode not only saves energy, but helps equipment run cooler and last longer. 105 Businesses that use ENERGY STAR enabled office equipment may realize additional savings on air conditioning and maintenance. Over its lifetime, ENERGY STAR qualified equipment in a single home office

(e.g., computer, monitor, printer, and fax) can save enough electricity to light an entire home for more than 4 years. Power management (sleep settings) on computers and monitors can result in much savings annually. Remember, saving energy prevents pollution Because most computer equipment is left on 24 hours a day, power management features are important for saving energy and are an easy way to reduce air pollution. By using less energy, these products help lower consumers utility bills, and prevent greenhouse gas emissions. Getac Product Compliance All Getac products with ENERGY STAR logo comply with the ENERGY STAR standard, and the power management feature is enabled by default. As recommended by the ENERGY STAR program for optimal energy savings, the computer is automatically set to sleep after 15 minutes (in battery mode) and 30 minutes (in AC mode) of user inactivity. To wake up the computer, press the power button. If you want to configure power management settings such as inactivity time and ways to initiate/end Sleep mode, go to Power Options by right-clicking the battery icon on the Windows taskbar and then selecting Power Options in the pop-up menu. Please visit http://www.energystar.gov/powermanagement for detail information on power management and its benefits to the environment. 106 Battery Recycling For the U.S. and Canada only:

To recycle the battery, please go to the RBRC Call2Recycle website or use the Call2Recycle Helpline at 800-822-8837. Call2Recycle is a product stewardship program providing no-cost battery and cellphone recycling solutions across the U.S. and Canada. Operated by Call2Recycle, Inc., a 501(c)4 nonprofit public service organization, the program is funded by battery and product manufacturers committed to responsible recycling. See more at:

http://www.call2recycle.org 107 California Proposition 65 For California USA:

Proposition 65, a California law, requires warnings to be provided to California consumers when they might be exposed to chemical(s) identified by Proposition 65 as causing cancer and birth defects or other reproductive harm. Almost all electronic products contain 1 or more of the chemicals listed under Proposition 65. This does not mean the products pose a significant risk of exposure. As the consumers have the right to know about the products they purchase, we are giving this warning on our packaging and user manual to keep our consumers well informed.

! WARNING This product can expose you to chemicals including lead, TBBPA or formaldehyde, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov 108 About Battery and External Enclosure Replacement Battery The batteries of your product include two battery packs and a button cell (or called RTC battery). All batteries are available from Getac authorized service centers. The battery pack is user-replaceable. Replacement instructions can be found in Replacing the Battery Pack in Chapter 3. The bridge battery and button cell must be replaced by Getac authorized service centers. Visit the website at http://us.getac.com/support/support-select.html for authorized service center information. External Enclosure The external enclosure of the product can be removed using screwdrivers. The external enclosure can then be reused or refurbished. 109 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device Cet appareil contient des metteurs / rcepteurs exempts de licence conformes l'innovation, RSS (s) exempts de licence de Sciences et Dveloppement conomique Canada. Le fonctionnement est soumis la les deux conditions suivantes:

(1) Cet appareil ne doit pas provoquer d'interfrences.

(2) Cet appareil doit accepter toute interfrence, y compris les interfrences susceptibles de provoquer des fonctionnement de l'appareil The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems L'appareil fonctionnant dans la bande 51505250 MHz est uniquement destin une utilisation en intrieur afin de rduire le potentiel d'interfrences nuisibles aux systmes de satellites mobiles co-canal 110

Getac (E OZ Notebook Model name : B360 INPUT : 19V == 4.744 ATTENTION : Use only with the appropriate AC adapter Utiliser uniquement avec le bon adaptateur secteur This device complies with part 15 of FCC rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause un-desired operation. FE Contains FCC ID: QYL-5127MODMIN MADE IN CHINA

CID 2018 REV :B Made in Mexico pd Wks =

SRD Model : 5127 Modular Mini Part No : R51270030-96003 FCC ID : QYL-5127MODMIN SN: XXXXXXXXXX FE CE