FCC ID: QYLEM7355F WIRELESS MOUDLE

by: Getac Technology Corporation latest update: 2013-11-14 model: EM7355F

Two grants have been issued under this FCC ID from 10/21/2013 to 11/14/2013 (this is one of twenty-five releases in 2013 for this grantee). Public details available include frequency information, manuals, and internal & external photos. some products also feature user submitted or linked instructions, password defaults, warrantee terms, drivers, & troubleshooting guides.
permalink for this FCC identifier
|
|
|   
eg for Slack usage
app s submitted / available
1 2 User Manual Users Manual pdf 1.56 MiB
1 2 Cover Letter(s) pdf
1 2 Cover Letter(s) pdf
1 2 External Photos pdf
1 2 Internal Photos pdf
1 2 ID Label/Location Info pdf
1 2 ID Label/Location Info pdf
1 2 Cover Letter(s) pdf
1 2 RF Exposure Info pdf
1 2 RF Exposure Info pdf
1 2 RF Exposure Info pdf
1 2 RF Exposure Info pdf
1 2 Cover Letter(s) pdf
1 2 Test Report pdf
1 2 Test Report pdf
1 2 Test Setup Photos pdf
1 2 Cover Letter(s) pdf
1 2 Cover Letter(s) pdf
1 2 ID Label/Location Info pdf
1 2 Cover Letter(s) pdf
1 2 Cover Letter(s) pdf
1 2 External Photos pdf
1 2 User Manual Users Manual pdf 1.56 MiB

frequency equipment class purpose
1 2013-11-14 1850 ~ 1915 PCB - PCS Licensed Transmitter Class II permissive change or modification of presently authorized equipment
2 2013-10-21 1850 ~ 1915 PCB - PCS Licensed Transmitter Change in identification of presently authorized equipment. Original FCC ID: N7NEM7355 Grant Date: 12/18/2012

Application Forms

app s Applicant Information
1 2 Effective 2013-11-14
1 2 2013-10-21
1 2 Applicant's complete, legal business name Getac Technology Corporation
1 2 FCC Registration Number (FRN) 0018268243
1 2 Physical Address 5F.,Building A,No.209,Sec.1 Nangang.,Rd.
1 2 Taipei City, N/A 11568
1 2 Taiwan
app s TCB Information
1 2 TCB Application Email Address T******@TIMCOENGR.COM
1 2 c******@telefication.com
1 2 TCB Scope B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
app s FCC ID
1 2 Grantee Code QYL
1 2 Equipment Product Code EM7355F
app s Person at the applicant's address to receive grant or for contact
1 2 Name K****** C****
1 2 Telephone Number +886-******** Extension:
1 2 Fax Number +886-********
1 2 E-mail k******@getac.com.tw
app s Technical Contact
1 2 Firm Name Sporton International Inc
1 2 Name J****** T******
1 2 Physical Address No.52, HwaYa 1st Rd., Kwei-Shan Hsiang
1 2 Taiwan
1 2 Telephone Number 886-3********
1 2 Fax Number 886-3********
1 2 E-mail J******@sporton.com.tw
app s Non Technical Contact
1 2 Firm Name Sporton International Inc
1 2 Name J****** T****
1 2 Physical Address Taiwan
1 2 E-mail J******@sporton.com.tw
app s Confidentiality (long or short term)
1 2 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 No
1 2 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 If so, specify the short-term confidentiality release date (MM/DD/YYYY format)05/13/2014
1 2 03/25/2014
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 Is this application for software defined/cognitive radio authorization?No
1 2 Equipment ClassPCB - PCS Licensed Transmitter
1 2 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)WIRELESS MOUDLE
1 2 Radio Module
1 2 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
1 2 Modular Equipment TypeLimited Single Modular Approval
1 2 Single Modular Approval
1 2 Purpose / Application is forClass II permissive change or modification of presently authorized equipment
1 2 Change in identification of presently authorized equipment. Original FCC ID: N7NEM7355 Grant Date: 12/18/2012
1 2 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?No
1 2 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 Grant CommentsPower out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6.5 dBi at 800 MHz and/or 850 MHz, 3.0 dBi at 1900 MHz, 9.0 dBi at 700 MHz and 6 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, 27 and 90. The Grantee is responsible for providing the documentation required for modular use. (Date of Grant: 10/21/2013) Class II Permissive Change: This Class II Permissive Change is to enable this module to be integrated in Getac Tablet, Model Name: F110. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.44 W/kg and 1.53 W/kg, respectively.
1 2 Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6.5 dBi at 800 MHz and/or 850 MHz, 3.0 dBi at 1900 MHz, 9.0 dBi at 700 MHz and 6 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22, 24, 27 and 90. The Grantee is responsible for providing the documentation required for modular use.
1 2 Is there an equipment authorization waiver associated with this application?No
1 2 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 Firm Name Sporton International Inc.
1 2 Name A**** C******
1 2 Telephone Number 886-3******** Extension:
1 2 Fax Number 886-3********
1 2 E-mail a******@sporton.com.tw
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 22H BC 824 849 1.841 2.5 ppm 249KGXW
1 2 22H BC 824 849 0.551 2.5 ppm 240KG7W
1 3 24E BC 1850 1910 0.91 2.5 ppm 244KGXW
1 4 24E BC 1850 1910 0.381 2.5 ppm 240KG7W
1 5 9 BC 817 824 0.264 2.5 ppm 1M28F9W
1 6 22H BC 824 849 0.274 2.5 ppm 1M29F9W
1 7 24E BC 1850 1910 0.273 2.5 ppm 1M28F9W
1 8 22H BC 824 849 0.197 2.5 ppm 4M18F9W
1 9 24E BC 1850 1910 0.209 2.5 ppm 4M20F9W
1 1 27 BC 1710 1755 0.2 2.5 ppm 4M20F9W
1 11 24E BC 1850 1910 0.222 2.5 ppm 4M52F9W
1 12 24E BC 1850 1910 0.218 2.5 ppm 9M04F9W
1 13 24E BC 1850 1910 0.219 2.5 ppm 13M5F9W
1 14 24E BC 1850 1910 0.211 2.5 ppm 17M9F9W
1 15 22H BC 824 849 0.197 2.5 ppm 4M52F9W
1 16 22H BC 824 849 0.195 2.5 ppm 9M04F9W
1 17 24E BC 1850 1915 0.223 2.5 ppm 4M50F9W
1 18 24E BC 1850 1915 0.219 2.5 ppm 9M04F9W
1 19 24E BC 1850 1915 0.22 2.5 ppm 13M4F9W
1 2 24E BC 1850 1915 0.218 2.5 ppm 17M9F9W
1 21 27 BC 1710 1755 0.218 2.5 ppm 4M48F9W
1 22 27 BC 1710 1755 0.217 2.5 ppm 9M04F9W
1 23 27 BC 1710 1755 0.218 2.5 ppm 13M4F9W
1 24 27 BC 1710 1755 0.214 2.5 ppm 17M9F9W
1 25 27 BC 704 716 0.206 2.5 ppm 4M48F9W
1 26 27 BC 704 716 0.196 2.5 ppm 9M08F9W
1 27 27 BC 777 787 0.2 2.5 ppm 4M52F9W
1 28 27 BC 777 787 0.187 2.5 ppm 9M08F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 22H BC 824 849 1.841 2.5 ppm 249KGXW
2 2 22H BC 824 849 0.551 2.5 ppm 240KG7W
2 3 24E BC 1850 1910 0.91 2.5 ppm 244KGXW
2 4 24E BC 1850 1910 0.381 2.5 ppm 240KG7W
2 5 9 BC 817 824 0.264 2.5 ppm 1M28F9W
2 6 22H BC 824 849 0.274 2.5 ppm 1M29F9W
2 7 24E BC 1850 1910 0.273 2.5 ppm 1M28F9W
2 8 22H BC 824 849 0.197 2.5 ppm 4M18F9W
2 9 24E BC 1850 1910 0.209 2.5 ppm 4M20F9W
2 1 27 BC 1710 1755 0.2 2.5 ppm 4M20F9W
2 11 24E BC 1850 1910 0.222 2.5 ppm 4M52F9W
2 12 24E BC 1850 1910 0.218 2.5 ppm 9M04F9W
2 13 24E BC 1850 1910 0.219 2.5 ppm 13M5F9W
2 14 24E BC 1850 1910 0.211 2.5 ppm 17M9F9W
2 15 22H BC 824 849 0.197 2.5 ppm 4M52F9W
2 16 22H BC 824 849 0.195 2.5 ppm 9M04F9W
2 17 24E BC 1850 1915 0.223 2.5 ppm 4M50F9W
2 18 24E BC 1850 1915 0.219 2.5 ppm 9M04F9W
2 19 24E BC 1850 1915 0.22 2.5 ppm 13M4F9W
2 2 24E BC 1850 1915 0.218 2.5 ppm 17M9F9W
2 21 27 BC 1710 1755 0.218 2.5 ppm 4M48F9W
2 22 27 BC 1710 1755 0.217 2.5 ppm 9M04F9W
2 23 27 BC 1710 1755 0.218 2.5 ppm 13M4F9W
2 24 27 BC 1710 1755 0.214 2.5 ppm 17M9F9W
2 25 27 BC 704 716 0.206 2.5 ppm 4M48F9W
2 26 27 BC 704 716 0.196 2.5 ppm 9M08F9W
2 27 27 BC 777 787 0.2 2.5 ppm 4M52F9W
2 28 27 BC 777 787 0.187 2.5 ppm 9M08F9W

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC