all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Manual | Users Manual | 5.42 MiB | ||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | External Photos | |||||||
1 2 | Internal Photos | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | Cover Letter(s) | December 11 2012 | ||||||
1 2 | Cover Letter(s) | December 11 2012 | ||||||
1 2 | Cover Letter(s) | December 11 2012 | ||||||
1 2 | ID Label/Location Info | December 11 2012 |
1 2 | User Manual | Users Manual | 5.42 MiB |
B320 USERS MANUAL Rugged Mobile Computing Solutions Oct. 2012 TRADEMARKS The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. All other brand and product names are trademarks or registered trademarks of their respective owners. NOTE The information in this manual is subject to change without notice. Most screens and operating instructions in this manual are based on Windows 7. If youre using a different version of Windows, the screens and related operations may not be the same. For the latest version of the manual, please visit the Getac website at www.getac.com. ENERGY STAR is a government program that offers businesses and consumers energy-efficient solutions, making it easy to save money while protecting the environment for future generations. Please reference ENERGY STAR related information from www.energystar.gov. As an ENERGY STAR Partner, Getac Technology Corporation has determined that this product meets the ENERGY STAR guidelines for energy efficiency. An ENERGY STAR qualified computer uses 70 % less electricity than computers without enabled power management features. Earning the ENERGY STAR When every home office is powered by equipment that has earned the ENERGY STAR, the change will keep over 289 billion pounds of greenhouse gases out of the air. If left inactive, ENERGY STAR qualified computers enter a low-power mode and may use 15 watts or less. New chip technologies make power management features more reliable, dependable, and user-friendly than even just a few years ago. Spending a large portion of time in low-power mode not only saves energy, but helps equipment run cooler and last longer. Businesses that use ENERGY STAR enabled office equipment may realize additional savings on air conditioning and maintenance. Over its lifetime, ENERGY STAR qualified equipment in a single home office (e.g., computer, monitor, printer, and fax) can save enough electricity to light an entire home for more than 4 years. Power management (sleep settings) on computers and monitors can result in much savings annually. Remember, saving energy prevents pollution Because most computer equipment is left on 24 hours a day, power management features are important for saving energy and are an easy way to reduce air pollution. By using less energy, these products help lower consumers utility bills, and prevent greenhouse gas emissions. Table of Contents Chapter 1 Getting Started .................................................................. 1-1 Getting the Computer Running ............................................. 1-2 Unpacking ........................................................................... 1-2 Using the Tether (Optional) ............................................... 1-3 Connecting to AC Power .................................................... 1-4 Turning On and Off the Computer ................................... 1-5 Taking a Look at the Computer ............................................. 1-7 Top-open Components ....................................................... 1-7 Rear Components ............................................................. 1-10 Right-Side Components .................................................... 1-11 Left-Side Components ...................................................... 1-13 Bottom Components ........................................................ 1-14 Chapter 2 Operating Your Computer ................................................ 2-1 Using the Keyboard ................................................................ 2-2 Typewriter Keys .................................................................. 2-2 Cursor-Control Keys ............................................................ 2-2 Numeric Keypad ................................................................. 2-3 Function Keys ...................................................................... 2-4 Fn Key .................................................................................. 2-4 Hot Keys .............................................................................. 2-4 Using the Touchpad ................................................................ 2-6 Configuring the Touchpad ................................................. 2-8 Using the Touchscreen (Optional) ......................................... 2-9 Using Multi-touch Gestures (Optional) ........................... 2-10 Using the Input Panel ........................................................... 2-12 Using the Quick Buttons ....................................................... 2-13 Using the DVD Drive ............................................................. 2-15 i Inserting and Removing a Disc ........................................ 2-16 Using the Network Features ................................................ 2-18 Using the Modem ............................................................. 2-18 Using the LAN ................................................................... 2-19 Using the Wireless LAN .................................................... 2-19 Using the Bluetooth Feature ................................................ 2-22 Turning On/Off the Bluetooth Radio .............................. 2-22 Connecting to another Bluetooth Device ....................... 2-23 Using the Fingerprint Scanner ............................................. 2-25 Using the WWAN Feature (Optional) .................................. 2-28 Installing a SIM Card ......................................................... 2-28 Turning On/Off the WWAN Radio .................................. 2-29 Setting up a WWAN Connection ..................................... 2-29 Chapter 3 Managing Power ............................................................... 3-1 AC Adapter .............................................................................. 3-2 Battery Pack ............................................................................. 3-3 Charging the Battery Pack ................................................. 3-3 Initializing the Battery Pack ............................................... 3-4 Checking the Battery Level ................................................ 3-4 Replacing the Battery Pack ................................................ 3-5 Battery Low Signals and Actions ....................................... 3-7 Power Management ............................................................... 3-8 Hibernation ......................................................................... 3-9 Power-Saving Tips ................................................................. 3-10 Chapter 4 Expanding Your Computer ............................................... 4-1 Connecting a VGA or HDMI Display Monitor ....................... 4-2 Connecting a Serial Device ..................................................... 4-4 Connecting a USB Device ....................................................... 4-5 Connecting an eSATA Device ................................................. 4-6 Connecting an IEEE 1394 Device ............................................ 4-7 Connecting Audio Devices ..................................................... 4-8 Using Smart Cards ................................................................... 4-9 Using PC Cards ....................................................................... 4-10 Using ExpressCards ................................................................ 4-12 Using Storage Cards .............................................................. 4-14 ii System Memory Upgrade ..................................................... 4-15 Replacing the Hard Disk Drive ............................................. 4-18 Installing a Secondary Battery Pack or Hard Disk Drive ..... 4-19 Chapter 5 Using BIOS Setup and System Recovery .......................... 5-1 BIOS Setup ............................................................................... 5-2 When and How to Use ....................................................... 5-2 Information Menu .............................................................. 5-3 Main Menu .......................................................................... 5-4 Advanced Menu .................................................................. 5-5 Security Menu ................................................................... 5-12 Boot Menu ........................................................................ 5-14 Exit Menu .......................................................................... 5-15 System Recovery .................................................................... 5-16 Chapter 6 Using Getac Software ....................................................... 6-1 Using G-Manager .................................................................... 6-2 Starting G-Manager ............................................................ 6-2 System Tab .......................................................................... 6-3 Battery Tab .......................................................................... 6-4 ECO Tab ............................................................................... 6-6 ECO Information ................................................................. 6-7 Light Sensor Tab ................................................................. 6-8 Antenna Tab ....................................................................... 6-9 Monitoring Tab ................................................................. 6-10 GPS Status Tab .................................................................. 6-12 Quick Button Definition Utility ............................................ 6-13 Chapter 7 Caring for the Computer ................................................... 7-1 Protecting the Computer ....................................................... 7-2 Using an Anti-Virus Strategy ............................................. 7-2 Using Windows Action Center ........................................... 7-2 Using the Cable Lock .......................................................... 7-3 Taking Care of the Computer ................................................ 7-4 Location Guidelines ............................................................ 7-4 General Guidelines ............................................................. 7-4 Cleaning Guidelines ............................................................ 7-5 Battery Pack Guidelines ...................................................... 7-5 iii Touchscreen Guidelines ...................................................... 7-7 When Traveling ....................................................................... 7-8 Chapter 8 Troubleshooting ................................................................ 8-1 Preliminary Checklist ............................................................... 8-2 Solving Common Problems .................................................... 8-3 Battery Problems ................................................................ 8-3 Bluetooth Wireless Transmission Problems ...................... 8-3 Display Problems ................................................................. 8-4 DVD Drive Problems ........................................................... 8-5 Hardware Device Problems ................................................ 8-5 Hard Disk Drive Problems ................................................... 8-6 Keyboard, Mouse, and Touchpad Problems ..................... 8-6 LAN Problems ...................................................................... 8-7 Power Management Problems .......................................... 8-7 Software Problems ............................................................. 8-8 Sound Problems .................................................................. 8-8 Startup Problems ................................................................ 8-9 WLAN Problems ................................................................ 8-10 Other Problems ................................................................. 8-11 Resetting the Computer ....................................................... 8-12 Appendix A Specifications .................................................................... A-1 Appendix B Regulatory Information ................................................... B-1 On the Use of the System ....................................................... B-2 Class B Regulations ............................................................. B-2 Safety Notices ..................................................................... B-3 On the Use of the RF Device .................................................. B-6 USA and Canada Safety Requirements and Notices ........ B-6 European Union CE Marking and Compliance Notices .... B-9 iv Chapter 1 Getting Started Congratulations on purchasing this rugged computer. This chapter first tells you step by step how to get the computer up and running. Then, you will find a section briefly introducing the external components of the computer. Getting Started 1-1 Getting the Computer Running This section guides you through the procedures for getting the computer ready for operation. Unpacking After unpacking the shipping carton, you should find these standard items:
Rugged computer Accessories:
AC adapter AC power cord Driver disc Document(s) Stylus and tether (depending on your model) Inspect all the items. If any item is damaged or missing, notify your dealer immediately. Keep the shipping carton and packing materials in case you need to ship or store the computer in the future. 1-2 Getting Started Using the Tether (Optional) A tether is provided for attaching the stylus to your computer. 1. Insert one of the tethers loop ends through the hole of the stylus (as indicated by below). Then, insert the other end through the first loop
(as indicated by below) and pull it tight. 2. Insert the other loop end to the tether hole on the computer (as indicated by below). Then, insert the stylus end through the loop (as indicated by below) and pull it tight. Getting Started 1-3 Connecting to AC Power The computer operates either on the external AC power or internal battery power. It is suggested that you use AC power when you start up the computer for the very first time. CAUTION: Use only the AC adapter included with your computer. Using other AC adapters may damage the computer. 1. Plug the DC cord of the AC adapter to the power connector of the computer (). 2. Plug the female end of the AC power cord to the AC adapter and the male end to an electrical outlet (). 3. When the AC adapter is connected, power is being supplied from the electrical outlet to the AC adapter and onto your computer. Now, you are ready to turn on the computer. 1-4 Getting Started CAUTION:
When you disconnect the AC adapter, disconnect from the electrical outlet first and then from the computer. A reverse procedure may damage the AC adapter or the computer. When unplugging the connector, always hold the plug head. Never pull on the cord. NOTE: When the AC adapter is connected, it also charges the battery pack. For information on using battery power, see Chapter 3. Turning On and Off the Computer Turning On 1. Open the top cover by pulling the cover latch and lifting up the cover. You can tilt the cover forward or backward for optimal viewing clarity. Getting Started 1-5 2. Press the power button (
). 3. Each time the computer is turned on, it performs a Power-On Self Test
(POST), and the operating system such as Windows should start. Turning Off When you finish a working session, you can stop the system by turning off the power or leaving it in Sleep or Hibernation mode:
To... Do this... Power off
(Shutdown) Use the Windows Start menu in the lower left and follow the shutdown procedure. Sleep Hibernate Press the power button* or use the Windows Start menu to put the computer in Sleep mode. Use the Windows Start menu to put the computer in Hibernation mode. (See Hibernation in Chapter 3 for more information.)
* Sleep is the default setting of the power button. You may change what the power button does in Windows Control Panel. 1-6 Getting Started Taking a Look at the Computer NOTE: Depending on the model you purchased, the appearance of your computer may not be exactly the same as those shown in this manual. CAUTION: You need to open the protective covers to access the connectors or devices inside. When not accessing a connector or device, make sure to close the cover completely for water-, dust-, and fire-proof integrity of your computer. (Engage the locking mechanism if existing.) Top-open Components Getting Started 1-7 Description Component Ref Top Cover Latch Locks the top cover. Camera Lens
(optional) LCD Screen Indicators Displays the output of the computer. May include the optional touchscreen feature. Allows you to use the camera function. HDD Heater
(optional) Lights amber when the optional hard disk drive heater is on. Hard Disk Drive Blinks green when the computer is accessing the hard disk. Card Reader Blinks green when the computer is accessing the storage card. Lights green when Caps Lock is on. Lights green when Num Lock is on. Serves as the fingerprint verification, preventing unauthorized access to your computer. Receives sound and voice for the computer. Serves as the data input device of the computer. Lights green when the computer is on. P. 1-5 Lights amber when the computer is in Sleep mode. Caps Lock Num Lock Fingerprint Scanner Microphone Keyboard Indicators Power 1-8 Getting Started See Also P. 1-5 P. 2-9 P. 8-9 P. 4-14 P. 2-3 P. 2-3 P. 2-29 P.2-2 Ref Component Battery Charge Wireless LAN Bluetooth WWAN Quick Buttons P1 Description Lights green when the battery is fully charged. Lights amber when the battery is being charged. Blinks amber when the batterys capacity is below 10 %. Lights green when the wireless LAN radio is on. Lights green when the Bluetooth radio is on. See Also P. 3-3 P. 3-7 P. 2-19 P. 2-22 Lights green when the WWAN radio is on. P. 2-29 P. 2-13 Toggles Blackout mode on or off. (The function can be redefined.) Brings up the ECO menu for selecting a power profile when using battery power. Toggles the sunlight-readable mode on or off. Enables or disables the light sensor. Power Button Turns the power on or off (Sleep mode by default). Touchpad Strap Holder Handle Serves as the pointing device of the computer. Two buckles hold the shoulder strap. Provides a convenient way to carry the computer. P. 1-5 P. 2-6 Getting Started 1-9 Rear Components Component Ref HDMI Connector USB 2.0 Port WLAN Pass-
through Connector
(optional) Description Connects a HDMI (High-Definition Multimedia Interface) monitor or TV set. Connects a USB device, such as a USB flash disk, printer, digital camera, joystick, and more. Connects the external antenna for WLAN
(wireless local area network) connectivity. NOTE: Must be connected via docking. WWAN Pass-
Connects the external antenna for WWAN
(wide area network) transmission. NOTE: Must be connected via docking. through Connector
(optional) Docking Connector VGA Connector Connects an external display monitor. Connects to the Vehicle Dock (purchased separately). See Also P. 4-2 P. 4-5 P. 4-2 1-10 Getting Started Component Connector Ref Serial Power Connector Kensington Lock Description Connects a serial device. The left one is COM1 and the right one is COM2. Connects the AC adapter. Locks the computer to a stationary object for security. See Also P. 4-4 P. 1-3 P. 7-2 Right-Side Components Description Accepts a PC card for additional functions. There are two slots. Ref Component PC Card Slot SIM Card Slot Accepts a SIM card for models having the WWAN module. NOTE: The slot still exists but cannot be used for models without the WWAN module. See Also P. 4-9 Getting Started 1-11 Connector Ref Component RJ-45 RJ-11 Stylus Connector
(optional) Tether Hole Hard Disk MMC/SD Card Drive Reader USB 3.0 Port RF (radio frequency) Switch Description Connects the LAN cable. The left one is LAN1 and the right one is LAN2. Connects the telephone line. Serves as the input device by tapping on the touchscreen to make selections and enter information. Stylus tethered to this hole. Inside is the hard disk drive. Accepts a MultiMediaCard (MMC) or Secure Digital (SD) card for removable storage media. Connects a USB device, such as a USB flash disk, printer, digital camera, joystick, and more. Serves as the master on/off control of the RF radio. When set to OFF, all wireless modules (such as WLAN, Bluetooth, and WWAN) cannot be used. When set to ON, individual settings of the module work. Mini IEEE 1394 Port Connects an IEEE 1394 device such as a scanner, printer, DVCAM, and VCR. Audio Output Connector Microphone Connector Connects a set of headphones or external speakers with amplifier. Connects an external microphone. 1-12 Getting Started See Also P. 2-18 P. 2-18 P. 2-9 P. 1-3 P. 4-14 P. 4-5 P. 2-19 P. 2-22 P. 2-29 P. 4-7 P. 4-8 P. 4-8 Ref Component eSATA II /USB 3.0 Combo Port GPS Pass-
through Connector
(optional) Description Connects an eSATA device such as an external hard drive or optical drive. Can also function as a USB port. Connects to the external antenna for GPS signal reception. See Also P. 4-6 P. 4-5 Left-Side Components Description Accepts an ExpressCard/34 or ExpressCard/54 for additional functions. See Also P. 4-12 Accepts a smart card for additional security feature. P. 4-9 Getting Started 1-13 Ref Component ExpressCard Smart Card Slot Reader Ref Component Super Multi Drive Description Accepts a compact disc for installing or loading software, accessing data, and playing music/video. Can be replaced by a secondary hard disk drive or battery pack (purchased separately). Battery Pack Supplies power to your computer when external power is not connected. Bottom Components Description Ref Component Stereo Speaker Sends out sound and voice from the Memory Slots Inside are the memory slots for expanding the memory size of your computer. computer. 1-14 Getting Started See Also P. 2-15 P. 4-19 P. 3-3 See Also P. 4-15 Chapter 2 Operating Your Computer This chapter provides information about the use of the computer. If you are new to computers, reading this chapter will help you learn the operating basics. If you are already a computer user, you may choose to read only the parts containing information unique to your computer. CAUTION:
Do not expose your skin to the computer when operating it in a very hot or cold environment. The computer can get uncomfortably warm when you use it in high temperatures. As a safety precaution in such a circumstance, do not place the computer on your lap or touch it with your bare hands for extended periods of time. Prolonged body contact can cause discomfort and potentially a burn. Operating Your Computer 2-1 Using the Keyboard Your keyboard has all the standard functions of a full-sized computer keyboard plus an Fn key added for specific functions. The standard functions of the keyboard can be further divided into four major categories:
Typewriter keys Cursor-control keys Numeric keys Function keys Typewriter Keys Typewriter keys are similar to the keys on a typewriter. Several keys are added such as the Ctrl, Alt, Esc, and lock keys for special purposes. When the lock keys (Caps Lock and Num Lk) are pressed, their corresponding indicators light up. The Control (Ctrl) / Alternate (Alt) key is normally used in combination with other keys for program-specific functions. The Escape (Esc) key is usually used for stopping a process. Examples are exiting a program and canceling a command. The function depends on the program you are using. Cursor-Control Keys Cursor-control keys are generally used for moving and editing purposes. NOTE: The word cursor refers to the indicator on the screen that lets you know exactly where on your screen anything you type will appear. It can take the form of a vertical or horizontal line, a block, or one of many other shapes. 2-2 Operating Your Computer Numeric Keypad A 15-key numeric keypad is embedded in the typewriter keys as shown next:
Numeric keys facilitate entering of numbers and calculations. When Num Lock is on, the numeric keys are activated; meaning you can use these keys to enter numerals. Operating Your Computer 2-3 Function Keys On the top row of the keys are the function keys: F1 to F12. Function keys are multi-purpose keys that perform functions defined by individual programs. Fn Key The Fn key, at the lower left corner of the keyboard, is used with another key to perform the alternative function of a key. The letter Fn and the alternative functions are identified by the color of blue on the keytop. To perform a desired function, first press and hold Fn, then press the other key. Hot Keys Hot keys refer to a combination of keys that can be pressed any time to activate special functions of the computer. Most hot keys operate in a cyclic way. Each time a hot key combination is pressed, it shifts the corresponding function to the other or next choice. You can easily identify the hot keys with the icons imprinted on the keytop. The hot keys are described next. Key Description Switches the keyboard backlight on and off (option). Switches the wireless LAN radio off or on. Decreases the sound volume. Increases the sound volume. 2-4 Operating Your Computer Key Description Switches the display output to one of the following when an external monitor is connected through the VGA port. Decreases the LCD brightness. The LCD still has 2 nits brightness when you reach the lowest level. Increases the LCD brightness. Switches the touchscreen on and off (option). Switches the touchpad off and on. Switches the system sound output off (mute) and on. Switches the display on and off. Serves as the sleep button that you can define with Windows Power Options. Windows Keys The keyboard has two keys that perform Windows-specific functions:
Windows Logo key and Application key. Windows Logo key opens the Start menu and performs The software-specific functions when used in combination with other keys. The Application key usually has the same effect as a right mouse click. (See your Windows manual for more information.) Operating Your Computer 2-5 Using the Touchpad CAUTION: Do not use a sharp object such as a pen on the touchpad. Doing so may damage the touchpad surface. NOTE: For optimal performance of the touchpad, keep your fingers and the pads clean and dry. When tapping on the pad, tap lightly. Do not use excessive force. The touchpad is a pointing device that allows you to communicate with the computer by controlling the location of the pointer on the screen and making selection with the buttons. The touchpad consists of a rectangular pad (work surface) and a left and right buttons. To use the touchpad, place your forefinger or thumb on the pad. The rectangular pad acts like a miniature duplicate of your display. As you slide your fingertip across the pad, the pointer (also called cursor) on the screen moves accordingly. When your finger reaches the edge of the pad, simply relocate yourself by lifting the finger and placing it on the other side of the pad. Here are some common terms that you should know when using the touchpad:
2-6 Operating Your Computer Term Point Click Double-click Drag and drop Scroll Action Move your finger on the pad until the cursor points to the selection on the screen. Press and release the left button. or Tap gently anywhere on the pad. Press and release the left button twice in quick succession. or Tap twice on the pad rapidly. Press and hold the left button, then move your finger until you reach your destination (drag). Finally, release the button (drop) when you finish dragging your selection to the destination. The object will drop into the new location. or Gently tap twice on the pad and on the second tap, keep your finger in contact with the pad. Then, move your finger across the pad to drag the selected object to your destination. When you lift your finger from the pad, the selected object will drop into place. To scroll is to move up and down or left and right in the working area on the screen. To move vertically, place your finger on the right or left edge of the pad and slide your finger up and down along the edge. To move horizontally, place your finger on the top or bottom edge of the pad and slide your finger left and right. This function works only after you install the touchpad driver supplied with the computer and configure the touchpad to enable the function. It may not work for all applications. Operating Your Computer 2-7 TABLE NOTE: If you swap the left and right buttons, tapping on the touchpad as an alternative method of pressing the left button will no longer be valid. Configuring the Touchpad You may want to configure the touchpad to suit your needs. For example, if you are a left-handed user, you can swap the two buttons so that you can use the right button as the left button and vice versa. You can also change the size of the on-screen pointer, the speed of the pointer, and so on. To configure the touchpad, go to Control Panel Mouse Properties. 2-8 Operating Your Computer Using the Touchscreen (Optional) CAUTION: Do not use a sharp object such as a ballpoint pen or pencil on the touchscreen. Doing so may damage the touchscreen surface. Use your finger or the included stylus. The touchscreen is a touch-sensitive device that allows you to navigate on the screen without using a keyboard, touchpad, or mouse. Use the included stylus to select objects on the screen. The stylus can be stretched for better grip and handling. The following table shows how you use the touchscreen to obtain equivalent mouse functions. Term/Action Tap: Touch the screen once. Double-tap: Touch the screen twice rapidly. Tap and hold: Tap and hold until a popup menu appears. Equivalent Mouse Function Click/Point Double-click Right-click Drag: Hold the stylus (or finger) on the screen and drag across the screen until reaching your destination. Drag Operating Your Computer 2-9 Using Multi-touch Gestures (Optional) If your computer model comes with multi-touch-capable screen and Windows 7, you can interact with your computer by placing two fingers on the screen. The movement of the fingers across the screen creates gestures, which send commands to the computer. Here are the multi-touch gestures that you can use:
Gestures Actions Descriptions
( = finger down; = finger up) Pan
(Scroll) Zoom
(Pinch) Rotate Use panning to see another part of a page that has scroll bars. Use zooming to make an item (a photo for example) on the screen larger or smaller. The gesture works in applications that support mouse wheel zooming. Use rotating to move a picture or other item on the screen in a circular direction
(clockwise or counter-
clockwise). The gesture works in applications that support the specific gesture. or Drag 1 or 2 fingers up or down. Move two fingers apart/toward each other. or Move two fingers in opposing directions.
-or-
Use one finger to pivot around another. 2-10 Operating Your Computer Gestures Actions Descriptions
( = finger down; = finger up) Press and Tap Two-
finger Tap Flicks Press on target and tap using a second finger. Tap two fingers at the same time
(where the target is in the midpoint between the fingers). Make quick drag gestures in the desired direction. Use press and tap to access the shortcut menu. The function is defined by applications that support the specific gesture. Flick left or right to navigate back and forward in a browser and other applications. The gesture works in most applications that support back and forward. Operating Your Computer 2-11 Using the Input Panel Use the Input Panel to enter text and perform various keyboard functions. There are two types of Input Panels for you to use in Windows 7:
Touch Keyboard allows you to enter text by tapping the keys with your stylus, like pressing the keys on a standard keyboard. Writing Pad allows you to write on the writing pad, like writing on a piece of paper. Your handwriting will be converted into typed text. To open the Input Panel, tap the Input Panel tab, which appears by default on the left edge of the screen. To switch between the two types, tap or at the upper left corner of the Input Panel. NOTE: For more information on using the Input Panel, see Windows online help. 2-12 Operating Your Computer Using the Quick Buttons The Quick Buttons allow you to quickly start a program or activate a function. Button Description Toggles Blackout mode on or off. In Blackout mode, the LCD backlight, keyboard/button backlight, and LED indicators are all turned off; and the sound is muted. To bring the computer out of Blackout mode, press the same button again or the power button. NOTE: The button works only when using battery power. Brings up the ECO menu as shown below:
ECO Menu ECO Off Quick Mode Power Saving Work Mode Select a mode before the ECO menu disappears. You can select a mode by pressing the ECO button or arrow key. The button lights up when the mode is on. Operating Your Computer 2-13 Button Description The ECO mode will return to the OFF setting when AC power is connected, any power related setting is changed, the computer resumes from Sleep/Hibernation mode, or the computer is restarted. Each ECO mode is a combination of power settings that results in different power consumptions. (For information on configuring the ECO modes, see ECO Tab in Chapter 6.) Toggles the sunlight-readable mode on or off. An OSD (On Screen Display) pops up on the screen indicating the current status. The button lights up when the mode is on. In sunlight-readable mode, the LCD brightness is increased to the highest level. The mode automatically ends when the brightness setting is changed, the computer resumes from Sleep/Hibernation mode, or the computer is restarted. Toggles the light sensor on or off. An OSD (On Screen Display) pops up on the screen indicating the current status. The button lights up when the function is activated. When set to On, the brightness will be automatically adjusted according to the current ambient light. The backlight will return to the default Off setting whenever the computer resumes from Sleep/Hibernation mode or the computer is restarted. You can re-define the function of the button. (See Quick Button Definition Utility in Chapter 6 for information.) 2-14 Operating Your Computer Using the DVD Drive Your computer comes with a Super Multi drive. The drive can read from and write to CD, DVD+, DVD- and DVD-RAM media. CAUTION:
When inserting a disc, do not use force. Make sure that the disc is correctly inserted into the tray, and then close the tray. Do not leave the drive tray open. Also, avoid touching the lens in the tray with your hand. If the lens becomes dirty, the drive may malfunction. Do not wipe the lens using materials with rough surface (such as paper towel). Instead, use a cotton swab to gently wipe the lens. FDA regulations require the following statement for all laser-based devices:
Caution, Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. NOTE: The DVD drive is classified as a Class 1 laser product. This label is located on the DVD drive. NOTE: This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Operating Your Computer 2-15 Inserting and Removing a Disc Follow this procedure to insert or remove a disc:
1. Turn on the computer. 2. Locate the DVD drive on the left side of your computer. Slide the lock downward to the unlocked position (
slide the latch toward the left () to open the protective cover.
) () and then 3. Press the eject button and the DVD tray will slide out partially. Gently pull it until it is fully extended. 4. To insert a disc, place down the disc in the tray with its label facing up. Slightly press the center of the disc until it clicks into place. 2-16 Operating Your Computer To remove a disc, hold the disc by its outer edge and lift it up from the tray. 5. Gently push the tray back into the drive. 6. Close the cover. Make sure the latch is engaged and slide the lock
) completely, not revealing the upward to the locked position (
underneath red part. Correct Incorrect (revealing red part) NOTE: In the unlikely event that you are unable to release the drive tray by pressing the eject button, you can manually release the disc. (See Optical Drive Problems in Chapter 8.) Operating Your Computer 2-17 Using the Network Features Using the Modem The internal 56 K fax/data modem allows you to use the telephone line to communicate with others by fax, email, or connect to an online service or bulletin board. To connect the telephone line to the modem, connect one end of the modem cable to the RJ-11 connector on the computer and the other end to the phone line. NOTE:
When using the communication software, you may have to disable power management. Do not enter the Sleep mode when using the communication software. 2-18 Operating Your Computer Using the LAN The internal 10/100/1000Base-T LAN (Local Area Network) module allows you to connect your computer to a network. It supports data transfer rate up to 1000 Mbps. To connect the network cable to the LAN module, connect one end of the LAN cable to the RJ-45 connector on the computer and the other end to the network hub. Using the Wireless LAN The WLAN module of your computer supports IEEE 802.11a/g/n. Turning On/Off the WLAN Radio NOTE: The FAA (Federal Aviation Agency) has deemed it unsafe to operate wireless devices in aircraft as this may interfere with flight safety. Remember to turn off wireless LAN when using your computer in the airplane. To turn on the WLAN radio:
1. Make sure that the RF switch is at the ON position. (Open the cover to access the switch.) Operating Your Computer 2-19 2. To turn on the WLAN radio, press Fn+F1 or click the WLAN button in the Quick Bar as shown below (an X over the button means the radio is currently off.) NOTE: To open the Quick Bar, right-click the Getac Utility icon (
on Windows taskbar and select Quick Bar. 3. Windows Mobility Center has wireless network turned on by default. on the taskbar should appear without a The Wireless Network icon red X. (In case you have previously turned it off in Windows Mobility Center, be sure to turn it on when using the function the next time.)
) located To turn off the WLAN radio:
You can turn off the WLAN radio by pressing Fn+F1 or using the Quick Bar. If you want to turn off all wireless radio, slide the RF switch to the OFF position. Connecting to a Wireless Network 1. Make sure that the WLAN function is enabled (as described above). 2. Tap the Wireless Network icon on the taskbar. (An orange light in the icon indicates connections are available.) 3. In the list of available wireless networks, tap a network, and then tap Connect. 2-20 Operating Your Computer 4. Some networks require a network security key or passphrase. To connect to one of those networks, ask your network administrator or Internet service provider (ISP) for the security key or passphrase. For more information on setting a wireless network connection, refer to Windows online help. NOTE: You can use Intel PROSet Wireless to take full advantage of the WiFi capabilities of your computer. See the Help of the utility for instructions. Operating Your Computer 2-21 Using the Bluetooth Feature Depending on your model, your computer may incorporate the Bluetooth 4.0 capability for short-range (about 50 meters) wireless communications between devices without requiring a cable connection. With Bluetooth wireless technology, data can be transmitted through walls, pockets and briefcases as long as two devices are within range. Turning On/Off the Bluetooth Radio To turn on the Bluetooth radio:
1. Make sure that the RF switch is at the ON position. (Open the cover to access the switch.) 2. To turn on the Bluetooth radio, click the Bluetooth button in the Quick Bar as shown below (an X over the button means the radio is currently off.) NOTE: To open the Quick Bar, right-click the Getac Utility icon (
on Windows taskbar and select Quick Bar. 3. The Bluetooth function is enabled by default, as indicated by the Bluetooth icon on the Windows taskbar.
) located 2-22 Operating Your Computer To turn off the Bluetooth radio:
You can turn off the Bluetooth radio by using the Quick Bar or Bluetooth utility. If you want to turn off all wireless radio, slide the RF switch to the OFF position. Connecting to another Bluetooth Device 1. Make sure that the Bluetooth function is enabled (as described above). 2. Make sure that the target Bluetooth device is turned on, discoverable and within close range. (See the documentation that came with the Bluetooth device. 3. To search for Bluetooth devices, right click the Bluetooth icon select Add a Device. and 4. Select the device you want to connect from the search results. Operating Your Computer 2-23 5. Depending on the type of Bluetooth device that you want to connect to, you will need to enter the pertinent information. For detailed information on using the Bluetooth feature, see Windows online Help. 2-24 Operating Your Computer Using the Fingerprint Scanner WARNING:
We shall not be liable for any loss or damage whatsoever resulting from your use of the fingerprint scanner or neglect of fingerprint scanner use, or any data loss resulting from such developments as fingerprint authentication malfunctioning. It is not recommended that you use the fingerprint scanner in a below-freezing temperature. The moisture on your finger can freeze to the scanners metal surface when you touch it, resulting in a failed operation. The fingerprint scanner provides a strong authentication mechanism based on fingerprint recognition. It features:
Website Log On Logon to your web accounts like banks, webmail, and more with a simple swipe of your finger. Windows Log On Logon to Microsoft Windows with a simple swipe of your finger every time you turn on your computer or log onto your desktop. QuickLaunch Quickly launch all your favorite websites, open files and folders, and log in to your accounts with a simple swipe of your finger. KeepSafe Protect your pictures, personal files, and folders using your fingerprint so only you can access them. NOTE: You can register a fingerprint only after creating a password for the Windows user account. Operating Your Computer 2-25 To register your fingerprint, click Start All Programs AuthenTec TrueSuite AuthenTec TrueSuite. Click the finger you want to register and follow the onscreen instructions to complete. 2-26 Operating Your Computer You can then use the Fingerprint Software to set up how the fingerprint authentication works. Settings App Store Options Help For detailed information, click the Help button of the software. Operating Your Computer 2-27 Using the WWAN Feature
(Optional) A WWAN (Wireless Wide Area Network) uses mobile telecommunication cellular network technologies to transfer data. The WWAN module of your computer supports 3G and 4G LTE. NOTE: Your computer only supports data transmission; voice transmission is not supported. Installing a SIM Card To use the WWAN feature to connect to the Internet, you need to subscribe to WWAN service and acquire a SIM card from the service provider. To install the SIM card, follow these steps:
1. Turn off the computer and disconnect the AC adapter. 2. Locate the SIM card slot on the left side of the computer. Lift the latch to open the protective cover. 3. Insert the SIM card into the holder. Make sure the golden contact area on the card is facing upward and the beveled corner on the SIM card pointing toward the slot. 4. Close the cover. Push down the latch to lock the cover. 2-28 Operating Your Computer Turning On/Off the WWAN Radio To turn on the WWAN radio:
1. Make sure that the RF switch is at the ON position. (Open the cover to access the switch.) 2. To turn on the WWAN radio, click the WWAN button in the Quick Bar as shown below (an X over the button means the radio is currently off.) NOTE: To open the Quick Bar, right-click the Getac Utility icon (
on Windows taskbar and select Quick Bar. To turn off the WWAN radio:
You can turn off the WWAN radio by using the Quick Bar or WWAN utility.
) located If you want to turn off all wireless radio, slide the RF switch to the OFF position. Setting up a WWAN Connection To set up a WWAN connection for the first time, follow these steps:
1. Make sure that the SIM card is inserted and the WWAN function is enabled (as described above). Operating Your Computer 2-29 2. On Windows desktop, double click the AirCard Watcher shortcut. The screen as below appears. If the radio is currently off, click Turn Radio On to turn on the radio. 3. 4. Use AirCard Watcher to manage your broadband wireless network connections such as:
Connect to the Internet Configure user options Manage profiles Use GPS to track your position (for models having the GPS module) Send and receive SMS messages NOTE: For detailed information on using AirCard Watcher, see the programs online help. 2-30 Operating Your Computer Chapter 3 Managing Power Your computer operates either on external AC power or on internal battery power. This chapter tells you how you can effectively manage power. To maintain optimal battery performance, it is important that you use the battery in the proper way. Managing Power 3-1 AC Adapter CAUTION:
The AC adapter is designed for use with your computer only. Connecting the AC adapter to another device can damage the adapter. The AC power cord supplied with your computer is for use in the country where you purchased your computer. If you plan to go overseas with the computer, consult your dealer for the appropriate power cord. When you disconnect the AC adapter, disconnect from the electrical outlet first and then from the computer. A reverse procedure may damage the AC adapter or computer. When unplugging the connector, always hold the plug head. Never pull on the cord. The AC adapter serves as a converter from AC (Alternating Current) to DC
(Direct Current) power because your computer runs on DC power, but an electrical outlet usually provides AC power. It also charges the battery pack when connected to AC power. The adapter operates on any voltage in the range of 100~240 V AC. 3-2 Managing Power Battery Pack The battery pack is the internal power source for the computer. It is rechargeable using the AC adapter. The operating time of a fully charged battery pack depends on how you are using the computer. When your applications often access peripherals, you will experience a shorter operating time. NOTE: Care and maintenance information for the battery is provided in the Battery Pack Guidelines section in Chapter 7. Charging the Battery Pack NOTE:
Charging will not start if the batterys temperature is below 0 C (32 F) or above 40 C (104 F); the charging process will stop if the batterys temperature gets above 60 C (140 F). To avoid damaging the battery under this situation, disconnect the AC adapter and wait for the battery to return to room temperature before charging again. During charging, do not disconnect the AC adapter before the battery has been fully charged; otherwise you will get a prematurely charged battery. To charge the battery pack, connect the AC adapter to the computer and an electrical outlet. The Battery Charge Indicator (
) on the computer glows amber to indicate that charging is in progress. You are advised to keep the computer power off while the battery is being charged. When the battery is fully charged, the Battery Charge Indicator lights green. It takes approximately 3 ~ 6 hours to fully charge the Li-Ion battery pack when the computer is off, and approximately 4 ~ 6 hours to fully charge the battery pack when the computer is on. CAUTION: After the computer has been fully recharged, do not immediately disconnect and reconnect the AC adapter to charge it again. Doing so may damage the battery. Managing Power 3-3 NOTE: The battery level may automatically lessen due to the self-discharge process (0.21 % per day), even when the battery pack is fully charged (100
%). This happens no matter if the battery pack is installed in the computer. Initializing the Battery Pack You need to initialize a new battery pack before using it for the first time or when the actual operating time of a battery pack is much less than expected. Initializing is the process of fully charging, discharging, and then charging. It can take several hours. A tool called Gauge Reset is provided for the purpose. See Gauge Reset in Chapter 6 for information on using the tool. Checking the Battery Level NOTE: Any battery level indication is an estimated result. The actual operating time can be different from the estimated time, depending on how you are using the computer. By Operating System You can check the approximate battery level using the battery meter function of the operating system. To read the battery level in Windows, click the battery icon (
on external power) on the taskbar. when running on battery power or when running By Gas Gauge On the exterior side of the battery pack is a gas gauge for displaying the estimated battery charge. When the battery pack is not installed in the computer and you want to know the battery charge, you can press the switch with a pointed device to see the corresponding value of indicator segment that light green. 3-4 Managing Power Switch The value of the corresponding green segment indicates the relative percentage of the battery charge. The battery pack is fully discharged when you see no segment glowing green. Replacing the Battery Pack CAUTION:
There is danger of explosion if the battery is incorrectly replaced. Replace the battery only with the computer manufacturers optional battery packs. Discard used batteries according to the dealers instructions. Do not attempt to disassemble the battery pack. If you often rely on battery power for a long period of time while traveling, you may consider the purchase of an additional battery pack from your dealer and keep it with you in a fully charged state as a backup. To replace the battery pack, follow these steps:
1. Turn off the computer and disconnect the AC adapter. 2. Locate the battery compartment on the left side of the computer. Slide the lock toward the left to the unlocked position (
lift the latch () to open the protective cover.
) () and then Managing Power 3-5 3. Pull the ribbon strip and slide the battery pack out of the compartment. 4. With the strip facing outward, insert the new battery pack all the way into the compartment. 5. Close the cover, press the latch downward to engage, and then slide the lock towards the right to the locked position (
). 3-6 Managing Power Battery Low Signals and Actions The battery icon battery. changes appearance to display the current state of the Battery Icon Battery Level Description Discharging The icon shows the charge remaining in 10-percent increments until the charge reaches the low-battery level. Low The battery charge has reached the low-battery level (10% by default). Critically low The battery charge has reached the critical battery level (5% by default). By default, Windows will display a notification and put your computer into Hibernation. When the battery is low, the computers Battery Charge Indicator (
blinks red to alert you to take actions.
) also Always respond to low-battery by connecting the AC adapter, placing your computer in Hibernation mode, or turning off the computer. Managing Power 3-7 Power Management Your computer supports ACPI (Advanced Configuration and Power Interface) for power management. The power management feature allows you to reduce the power consumption for energy saving. With an ACPI-compliant operating system such as Windows, power supply to different computer components is controlled on an as-needed basis. This allows maximum power conservation and performance at the same time. In general, Windows power management works in this way:
What... When... Power to the hard disk is turned off When the hard disk has been idle for a set period. Power to the display is turned off When the display has been idle for a set period. The computer enters the Sleep mode. The hard disk and display are turned off and the entire system consumes less power. The computer enters the Hibernation mode. (See the next subsection for more information.) When the entire system has been idle for a set period. When you manually activate the mode. When the entire system has been idle for a set period. When you manually activate the mode. For detailed information on power management, see Windows Help. 3-8 Managing Power Hibernation Hibernation is a very useful feature. People frequently open many applications when they use computers. It takes some time to get all these applications open and running, and normally they all have to be closed before the computer can be turned off. When you use the hibernation feature, you do not have to close the applications. The computer stores the state of your computer to a file on the hard disk and then shuts down. The next time you turn on your computer, you return to exactly where you left off. Managing Power 3-9 Power-Saving Tips Aside from enabling your computers power saving mode (see previous section), you can do your part to maximize the batterys operating time by following these suggestions. Enter power saving mode when using battery power. Do not disable automatic power management features. Decrease the LCD brightness to the lowest comfortable level. Shorten the length of time before Windows turn off the display. Many USB devices use power just by being connected. If you use a USB mouse, you can save power by disconnecting the mouse and using the touchpad. If you use a USB flash drive, unplug it when you are not using it. Remove the card (such as PC card, ExpressCard, and Smart Card) if not using it. Turn off the wireless radio if you are not using the wireless module (such as WLAN, Bluetooth, or WWAN). Turn off the computer when you are not using it. 3-10 Managing Power Chapter 4 Expanding Your Computer You can expand the capabilities of your computer by connecting other peripheral devices. When using a device, be sure to read the instructions accompanying the device together with the relevant section in this chapter. Expanding Your Computer 4-1 Connecting a VGA or HDMI Display Monitor If you want the benefits of a larger display screen with higher resolution, you can connect an external display monitor to your computer Your computer supports a VGA connector and a HDMI connector. HDMI
(High-Definition Multimedia Interface) is an audio/video interface that transmits uncompressed digital data and therefore delivers true HD quality. As a home theater system most likely includes a widescreen HDTV and surround-sound system, you can use the home theater system to view/play media stored on your computer by connecting via the HDMI interface. Follow this procedure to connect an external monitor:
1. Turn off the computer. 2. Depending on the type of your monitor, plug the monitors signal connector to the computers VGA or HDMI connector. VGA HDMI 4-2 Expanding Your Computer 3. Plug one end of the monitors power cord into the power socket on the monitor and the other end to an electrical outlet. 4. To use the monitor, turn on the monitor before turning on the computer. 5. The connected device should respond by default. If not, you can switch the display output by pressing the Fn+F5 hot keys. (You can also change the display through Windows Control Panel Display Settings Properties.) CAUTION: Do not disconnect the external monitor while the computer is in the Sleep mode or Hibernation mode. If no external monitor is connected when the computer resumes, the LCD might not display properly. Expanding Your Computer 4-3 Connecting a Serial Device Your computer has two serial ports for connecting a serial device. Follow this procedure to connect a serial device:
1. Turn off the computer. 2. Plug the device cable to the serial port on the rear of the computer. COM1 COM2 3. Turn on the computer. NOTE: Portable modems that derive power through the serial port cannot be used with the computer. Instead, use a modem that is powered by its own internal battery or external AC power. 4-4 Expanding Your Computer Connecting a USB Device Your computer has four USB ports (three USB 3.0 ports at the left side and one USB 2.0 port at the back)) for connecting USB devices, such as a digital camera, scanner, printer, modem, and mouse. USB 3.0 supports a transfer rate up to 5 Gbit/s and USB 2.0 a transfer rate up to 12 MB/s. To connect a USB device, plug the device cable to a matching USB port. Expanding Your Computer 4-5 Connecting an eSATA Device Your computer has an eSATA/USB combo port for connecting eSATA devices
(such as an external hard drive and external optical drive) / USB 3.0 devices
(see previous section). The port supports SATA II with transfer rate up o 3.0Gbit/s. It can provide 5V power if a certified USB-eSATA combo cable is used. To connect an external eSATA device, simply plug the device cable to the eSATA port. 4-6 Expanding Your Computer Connecting an IEEE 1394 Device Your computer has a mini IEEE 1394 port for connecting IEEE 1394 devices that include not only computer peripheral devices such as scanner, printer and high-quality CCD, but also consumer electronic equipment such as DVCAM and VCR. To connect an IEEE 1394 device, prepare an IEEE 1394 cable. Plug the appropriate end of the cable to the computers mini IEEE 1394 connector and the other end to the devices corresponding connector. Expanding Your Computer 4-7 Connecting Audio Devices For higher audio quality, you can send or receive sound through external audio devices. Audio Output Connector (green) can be connected to speakers, headphones, or earphone set. Microphone Connector (pink) can be connected to an external microphone for recording voice or sound. NOTE:
After connecting an external audio device, make sure that you specify the use of the correct audio device in Windows. When using the external speakers/headphones or microphone, you cannot use the internal one. 4-8 Expanding Your Computer Using Smart Cards Your computer has a smart card slot. With an embedded microcontroller, smart cards have the unique ability to store large amounts of data, carry out their own on-card functions (e.g., encryption and mutual authentication), and interact intelligently with a smart card reader. To insert a smart card:
1. Locate the smart card slot on the left side of the computer and open the protective cover. 2. Slide the smart card, with its label and embedded chip facing up into the slot. 3. Close the cover. 4. When a new card is seated, use the third-party smart card software to allow your computer to read it. To remove a smart card:
1. Make sure that the third-party smart card software is not accessing the smart card. 2. Pull the card out of the slot. 3. Close the cover. Expanding Your Computer 4-9 Using PC Cards NOTE:
Some PC cards require additional system resources. Before using such PC card, you may have to free other system resources for the PC card. Although some PC cards can be inserted and removed without turning off the computer, you cannot remove or install PC cards during Sleep mode. Your computer has two PC card slots which support PCMCIA Type II and CardBus specifications. To insert a PC card:
1. Locate the PC card slot on the right side of the computer. Lift the latch to open the protective cover. 2. Slide the PC card, with its label facing up, into the slot until the eject button pops out. Eject button 3. Close the cover. 4. When a new card is seated, the computer will detect it and try to install the appropriate driver. Follow the on-screen instructions to complete the process. To remove a PC card:
1. Double-click on the Safely Remove Hardware icon found on the Windows taskbar and the Safely Remove Hardware window appears on screen. 4-10 Expanding Your Computer 2. Select (highlight) the PC card from the list to disable the card. 3. Push the eject button and the card will slide out slightly. 4. Pull the card out of the slot. 5. Close the cover. Expanding Your Computer 4-11 Using ExpressCards Your computer has an ExpressCard slot. The ExpressCard slot can accommodate a 54 mm (ExpressCard/54) or 34 mm
(ExpressCard/34) wide ExpressCard. Typical ExpressCards support a very extensive range of applications including memory, wired and wireless communication cards, and security devices. Shown next are the appearances of ExpressCards for your reference. ExpressCard/54 ExpressCard/34 To insert an ExpressCard:
1. Locate the ExpressCard slot on the left side of the compute Lift the latch to open the protective cover. 2. Slide the ExpressCard, with its label facing up, all the way into the slot until the rear connectors click into place. 3. Close the cover. 4-12 Expanding Your Computer 4. When a new card is seated, the computer will detect it and try to install the appropriate driver. Follow the on-screen instructions to complete the process. To remove an ExpressCard:
1. Double-click on the Safely Remove Hardware icon found on the Windows taskbar and the Safely Remove Hardware window appears on screen. 2. Select (highlight) the ExpressCard from the list to disable the card. 3. Slightly push the card to release and then pull it out of the slot. 4. Close the cover. Expanding Your Computer 4-13 Using Storage Cards NOTE: You can use only storage cards. Your Card Reader does not support cards with I/O (input/output) functions such as a wireless network card or Bluetooth card. Your computer has a storage card reader. The card reader is a small drive for reading from and writing to removable storage cards (or called memory cards). The reader supports SD (Secure Digital), MMC (MultiMediaCard), and MMC Plus cards. To insert a storage card:
1. Locate the storage card reader on the right side of the computer. Lift the latch to open the protective cover.. 2. Align the card with its connector pointing to the slot and its label facing up. Slide the card into the slot until it reaches the end. 3. Windows will detect the card and assign it a drive name. To remove a storage card:
1. Double-click My Computer. 2. Right-click the drive with the card and select Eject. 3. Slightly push the card to release and then pull it out of the slot. 4-14 Expanding Your Computer System Memory Upgrade You can upgrade your computer by expanding system memory. CAUTION:
It is not recommended that you buy and install RAM modules by yourself. If you want to expand system memory, please ask Getac service center to install DRAM modules for you so that full compatibility can be guaranteed. RAM modules are extremely sensitive to static electricity. There are cases where static electricity generated by the human body has adversely affected such modules. When inserting or removing a RAM module, do not touch the terminals or internal components, insert objects other than the module, or allow foreign particles to enter. Doing so has been known to cause damage, fire, or electrical shock. To install the RAM module:
1. Turn off the computer and disconnect the AC adapter. 2. Remove the battery pack (see chapter 3). 3. Carefully place the computer upside down. 4. Remove the 6 screws to open the compartment cover. Expanding Your Computer 4-15 5. Remove the 2 screws to detach the fixing plate. 6. To install the RAM module, match the module's notched part with the socket's projected part and firmly insert the module into the socket at a 4-16 Expanding Your Computer 20-degree angle. Then push down until the retaining clips lock the module into position. CAUTION: If the RAM module is difficult to insert or difficult to push down, do not force it. Check once more to ensure that the module is positioned correctly. 7. Replace the fixing plate and secure with 2 screws. 8. Replace the compartment cover and secure with 6 screws. 9. Replace the battery pack. Expanding Your Computer 4-17 Replacing the Hard Disk Drive 1. Turn off the computer and disconnect the AC adapter. 2. Remove the battery pack (see chapter 3). 3. Locate the hard disk drive on the right side of your computer. Slide the lock toward the left to the unlocked position (
lift the latch () to open the protective cover.
) () and then 4. Pull the strip and slide the hard disk drive out of the slot. 5. With the strip facing outward, insert the new hard disk drive all the way into the slot. 6. Close the cover, press the latch downward to engage, and then slide the lock towards the right to the locked position (
). 4-18 Expanding Your Computer Installing a Secondary Battery Pack or Hard Disk Drive You can purchase a secondary battery pack or hard disk drive to be installed in the multi-purpose device bay. 1. Locate the multi-purpose device bay on the left side of your computer. Slide the lock downward to the unlocked position (
slide the latch toward the left () to open the protective cover.
) () and then 2. Pull the strip and slide the existing device out of the bay. 3. With the strip facing outward, insert the new device all the way into the bay. 4. Close the cover. Make sure the latch is engaged and slide the lock
) completely, not revealing the upward to the locked position (
underneath red part. Correct Incorrect (revealing red part) Expanding Your Computer 4-19 Chapter 5 Using BIOS Setup and System Recovery BIOS Setup Utility is a program for configuring the BIOS (Basic Input/ Output System) settings of the computer. BIOS is a layer of software, called firmware, that translates instructions from other layers of software into instructions that the computer hardware can understand. The BIOS settings are needed by your computer to identify the types of installed devices and establish special features. System Recovery reinstalls Windows to your system and configures it to the systems factory default settings. This chapter tells you how to use the BIOS Setup and System Recovery. Using BIOS Setup and System Recovery 5-1 BIOS Setup When and How to Use You need to run BIOS Setup Utility when:
You see an error message on the screen requesting you to run BIOS Setup Utility. You want to restore the factory default BIOS settings. You want to modify some specific settings according to the hardware . You want to modify some specific settings to optimize the system performance. To run BIOS Setup Utility, press the F2 key when the prompt appears on the screen during system startup. The prompt shows up on the screen for only a few seconds. You must press F2 quickly. The BIOS Setup Utility main screen appears as shown next. Information Main Advanced Security Boot Exit B320 RC7XXB0019 Intel(R) Core(TM) i7-3517U CPU @ 1.90GHz 4096 MB LITEONIT LAT-128M3S 128.0 GB PIORNEER DVD-RW DVRTD11RS - ATAPI R0.52.070520A R0.52a 00-22-20-0D-BF-3A 00-40-D0-01-00-49-11-E5 18 Hours Model NO:
Serial NO:
Processor Info:
Installed System Memory:
SATA HDD:
SATA ODD:
BIOS Revision:
EC Revision:
LAN MAC Address:
IEEE 1394 GUID:
Operating Time:
F1 Help Select Item +/- Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit 5-2 Using BIOS Setup and System Recovery In general, you can use the arrow keys to move around and + / keys to change the setup values. Keyboard information can be found at the bottom of the screen. NOTE:
The BIOS Setup Utility screens shown in this chapter are for your reference only. The actual items or settings on your computer may differ. The BIOS Setup Utility program may have been updated after the publication of this manual. The settings you select in your operating system might override similar settings in BIOS Setup Utility. Information Menu The Information menu contains the basic configuration information of the system. There are no user-definable items in this menu. Information Main Advanced Security Boot Exit B320 RC7XXB0019 Intel(R) Core(TM) i7-3517U CPU @ 1.90GHz 4096 MB LITEONIT LAT-128M3S 128.0 GB PIORNEER DVD-RW DVRTD11RS - ATAPI R0.52.070520A R0.52a 00-22-20-0D-BF-3A 00-40-D0-01-00-49-11-E5 18 Hours Model NO:
Serial NO:
Processor Info:
Installed System Memory:
SATA HDD:
SATA ODD:
BIOS Revision:
EC Revision:
LAN MAC Address:
IEEE 1394 GUID:
Operating Time:
F1 Help Select Item +/- Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit Using BIOS Setup and System Recovery 5-3 Main Menu The Main menu contains the various system settings. Information Main Security Boot Exit Advanced
[06/29/2012]
06
[11:33:08]
[Enabled]
[Last State]
[Last State]
Item Specific Help View or set system date. System Date:
System Time:
Legacy USB Support:
Wireless LAN:
Bluetooth:
F1 Help Select Item +/- Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit System Date sets the system date. System Time sets the system time. Legacy USB Support enables or disables the systems support for Legacy USB device in DOS mode. Wireless LAN specifies the on/off state of the wireless LAN radio when the system starts up. When set to Last State, the on/off state remains the same as the last state before you turn off the system. Bluetooth specifies the on/off state of the Bluetooth radio when the system starts up. When set to Last State, the on/off state remains the same as the last state before you turn off the system. 5-4 Using BIOS Setup and System Recovery Advanced Menu The Advanced menu contains the advanced settings. Information Main Advanced Intel(R) Rapid Start Technology Wake Up Capability CD/DVD Auto Power Control:
System Policy:
AC Initiation:
SATA Mode:
AMT Configuration Virtualization Technology Setup Graphic Setup Button Setup Device Configuration Boot Exit Item Specific Help iRST Intel (R) Rapid Start Technology Configuration Security
[ZPODD]
[Performance]
[Disabled]
[AHCI]
F1 Help Select Item +/- Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit Intel (R) Rapid Start Technology cofigures iRST. Press Enter to access the submenu as shown below. Advanced iRST Support:
Enable iRST. Item Specific Help
[Disabled]
Disabled Intel (R) Rapid Start Technology F1 Help Select Item +/- Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit Using BIOS Setup and System Recovery 5-5 iRST Support enables of disables iRST, which gets your system up and running faster. CD/DVD Auto Power Control sets if power to the CD/DVD drive is controlled for energy saving. When set to ZPODD (Zero Power Optical Disc Drive), power will not be supplied to the drive when there is no CD/DVD in the drive. When set to ODD Door, power will not be supplied to the drive when there is no CD/DVD in the drive and the protective door of the drive is closed. Wake Up Capability specifies events for waking up the system from S3
(Sleep) state. Press Enter to access the submenu as shown below. Item Specific Help Allow any key to wake up the system from S3
(Sleep) state. Any-key Wake Up From S3:
Ring Wake-Up From S3:
USB Wake-Up From S3:
Advanced Wake Up Capability
[Disabled]
Disabled
[Disabled]
[Disabled]
F1 Help Select Item +/- Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit Any-key Wake Up From S3 allows any key to wake up the system from S3 (Sleep) state. Ring Wake-Up From S3 allows a modem activity to wake up the system from S3 (Sleep) state. USB Wake-Up From S3 allow a USB device activity to wake up the system from S3 (Sleep) state. System Policy sets if the system always runs at full speed (Performance) or lowers down when its temperature is too high (Balance). 5-6 Using BIOS Setup and System Recovery AC Initiation sets if connecting AC power will automatically start or resume the system. SATA Mode set to AHCI if your hard disk supports AHCI. AHCI allows you to take advantage of Advanced Host Controller Interface features. The options are IDE and AHCI. CAUTION: Incorrect SATA mode settings can result in hard disk drive boot failure. AMT Configuration configures Active Management Technology parameters. Press Enter to access the submenu as shown below. Advanced AMT Configuration Item Specific Help Enabled
[Disabled]
[Disabled]
Intel AMT:
Intel AMT Setup Prompt:
F1 Help Select Item +/- Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit Enable/Disable Intel(R) Active Management Technology BIOS Extension. Note: iAMT H/W is always enabled. This option just controls the BIOS extension execution. If enabled this requires additional firmware in the SPI device Intel AMT enables or disables Intel Active Management Technology BIOS extension execution. AMT allows the system administrator to access an AMT featured computer remotely. Intel AMT Setup Prompt determines whether the prompt for entering Intel AMT Setup appears or not during POST. If disabled, users cannot enter Intel AMT Setup. Using BIOS Setup and System Recovery 5-7 Virtualization Technology Setup sets Virtualization Technology parameters. Press Enter to access the submenu as shown below. Advanced Virtualization Technology Setup
[Disabled]
Disabled
[Disabled]
Item Specific Help When enabled, a VMM can utilize the additional hardware virtualization capabilities. Intel(R) Virtualization Technology Intel(R) VT for Directed I/O(VT-d) F1 Help Select Item +/- Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit Intel(R) Virtualization Technology enables or disables Intel VT (Intel Virtualization Technology) feature which provides hardware support for processor virtualization. When enabled, a VMM (Virtual Machine Monitor) can utilize the additional hardware virtualization capabilities provided by this technology. Intel(R) VT for Directed I/O(VT-d) enables or disables VT-d (Intel Virtualization Technology for Directed I/O). When enabled, VT-d helps enhance Intel platforms for efficient virtualization of I/O devices. 5-8 Using BIOS Setup and System Recovery Graphics Setup sets graphics related options. Press Enter to access the submenu as shown below. Advanced Graphic Setup
64MB
[256MB]
Item Specific Help Select Pre-Allocated Graphics Memory size used by the Internal Graphics Device. This has no effect if external graphics are present. DVMT Pre-Allocated:
Total Graphics Memory:
F1 Help Select Item -/+ Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit NOTE: Graphic Setup parameters apply to the internal graphics device only. DVMT Pre-Allocated sets the amount of pre-allocated (fixed) graphics memory for use by the internal graphics device. Total Graphics Memory sets the amount of total graphics memory
(pre-allocated + fixed + DVMT) for use by the internal graphics device. Using BIOS Setup and System Recovery 5-9 Button Setup sets hardware button related options. Press Enter to access the submenu as shown below. Exit Boot Advanced Security Main Button Setup:
[Disable d]
Quick Btn Item Specific Help Define P1 button as Quick launch button or Emergency button. Information P1 Function:
F1 Help Select Item +/- Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit P1 Function specifies the P1 quick button function. When set to Blackout, the P1 quick button allows you to turn off the LCD backlight and LED indicator. When set to Quick Btn, the P1 quick button serves as a user-defined quick launch key. When set to Emergency Btn, the P1 quick button serves as the Emergency button. Emergency button only works with customized applications that support the specific button. 5-10 Using BIOS Setup and System Recovery Device Configuration enables or disables several hardware components. Press Enter to access the submenu as shown below. Item Specific Help Advanced Device Configuration Set WLAN device to enable/disable. Wireless LAN:
WWAN:
Bluetooth:
Media Card Reader:
Smart Card Reader:
HD Audio:
Modem:
Fingerprint Scanner:
1394 Port:
E-SATA Port:
F1 Help Select Item +/- Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit
Enabled
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
You can enable or disable the following items:
Wireless LAN WWAN Bluetooth Media Card Reader (MMC/SD) Smart Card Reader HD Audio (High Definition Audio) Modem Fingerprint Scanner 1394 Port E-SATA Port Using BIOS Setup and System Recovery 5-11 Security Menu The Security menu contains the security settings, which safeguard your system against unauthorized use. Information Main Advanced Boot Exit Item Specific Help Security Cleared Cleared
[Enter]
Enter
[Enter]
[Disabled]
[Enter]
Cleared Set or clear the Supervisor accounts password. Supervisor Password Is:
User Password Is:
Set Supervisor Password:
Set User Password Password on Boot:
Set HDD 0 Password:
HDD 0 Password:
TPM Setup Menu F1 Help Select Item +/- Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit NOTE:
You can set the user password only when the supervisor password has been set. If both the administrator and user passwords are set, you can enter any of them for starting up the system and/or entering BIOS Setup. But the user password only allows you to view/change the settings of certain items. A password setting is applied right after it is confirmed. To cancel a password, leave the password empty by pressing the Enter key. Supervisor/User Password Is shows whether you have set the supervisor/user password or not for the system. Set Supervisor/User Password sets the supervisor/user password. When typing the password, first make sure that Num Lock is off, and then type the password in the entry fields and press Enter. Confirm your password by 5-12 Using BIOS Setup and System Recovery typing it again and pressing Enter. You can set the supervisor/user password to be required for starting up the system and/or entering BIOS Setup. Password on Boot allows you to enable or disable the entering of password for booting up your system. Once the password is successfully set and this item is enabled, it is required for booting up the system. Set HDD 0 Password sets the password for locking the Primary Master hard disk drive. After setting a password, the hard disk drive can only be unlocked by the password no matter where it is installed. HDD 0 Password Is shows whether you have set the hard disk password. TPM Setup Menu sets various TPM parameters. Press Enter to access the submenu as shown below. TPM Setup Menu Security Item Specific Help This is used to decide whether TPM support should be enabled or disabled.
Enabled
[Enabled and Activated]
[No Change]
TPM Support:
Current TPM State:
Change TPM Status:
F1 Help Select Item +/- Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit TPM Support enables or disables TPM (Trusted Platform Module) support. TPM (Trusted Platform Module) is a component on your computers main-
board that is specifically designed to enhance platform security by providing a protected space for key operations and other security critical tasks. Current TPM State shows the current TPM state. Change TPM State allows you to select between No Change, Clear, Deactivate & Disable, and Enable & Activate. Using BIOS Setup and System Recovery 5-13 Boot Menu The Boot menu sets the sequence of the devices to be searched for the operating system. Information Main Advanced Security Boot Exit Boot priority order:
Item Specific Help Keys used to view or configure devices:
and arrows Select a device. + and -
moves the device up or down. Shift + 1 enables or disables a device. Del deletes an unprotected device. 1. SATA ODD: PIORNEER DVD-RW DVRTD11RS 2. SATA HDD: LITEONIT LAT-128M3S 3. USB HDD: USB DISK Pro 4. USB FDD: USB DISK Pro 1 5. PCI LAN: IBA GE Slot 00C8 v1365 6. USB ODD:
7. Other HDD:
F1 Help Select Item +/- Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit The bootable devices will be automatically detected during POST and shown here, allowing you to set the sequence that the BIOS uses to look for a device from which to load the OS. Below is a brief description of keyboard usage:
Key
+, 1 to 4 f or r X Function Selects (highlight) a boot device. Changes the boot sequence. Loads the default boot sequence. Specifies if the boot device is fixed (f) or removable (r). Moves the highlighted boot device from the Boot priority order list to the Excluded from boot order list, and vice versa. 5-14 Using BIOS Setup and System Recovery Key Function Shift+1 Deactivates/activates the highlighted boot device on the Boot priority order list. When a device has been deactivated, an !
(exclamation) symbol appears beside the item and system will bypass it when detecting boot device during POST. Exit Menu The Exit menu provides ways of exiting BIOS Setup. After finishing with your settings, you must save and exit so that the changes can take effect. Information Main Advanced Security Boot Exit Item Specific Help Exit Saving Changes Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes F1 Help Select Item +/- Change Values F9 Setup Defaults Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit Equal to F10, save all changes of all menus, then exit setup configure driver. Finally resets the system automatically. Exit Saving Changes saves the changes you have made and exits BIOS Setup Utility. Exit Discarding Changes exits BIOS Setup Utility without saving the changes you have made. Load Setup Defaults loads the factory default values for all the items. Discard Changes restores the previous values for all the items. Saves Changes saves the changes you have made. Using BIOS Setup and System Recovery 5-15 System Recovery Use System Recovery when:
The Windows operating system does not start at all. You want to restore the system to the factory state. WARNING:
Using this feature will reinstall Windows to your system and configure it to the systems factory default settings. All data on the hard disk drive will be lost. Make sure that power is not interrupted during the recovery process. An unsuccessful recovery may result in Windows startup problems. To run System Recovery:
1. Connect the AC adapter. 2. Turn on the computer. During system startup when the following screen appears, press Ctrl + Alt + F2 keys for four second. 3. In the screen that appears, select Recovery to start the recovery process. 5-16 Using BIOS Setup and System Recovery 4. The progress bar shows the percentage completed. When it reaches 100%, the system turns off. 5. Turn on the Tablet PC. The Windows setup wizard starts. Follow the onscreen prompts to continue. 6. When the system restarts, the installer screen appears. The installer will perform system hardware detection and driver installation. 7. When completed, the system restarts and displays Windows desktop. Using BIOS Setup and System Recovery 5-17 Chapter 6 Using Getac Software Getac software includes application programs for specific computer components and utility programs for overall management. This chapter describes how to use the programs. Using Getac Software 6-1 Using G-Manager G-Manager is a unified user interface utility that allows you to manage and configure the following:
System Battery ECO (economic mode) Light Sensor Monitoring GPS Status Starting G-Manager You can start up G-Manager by any of the following methods:
Click Start All Programs Getac Utility G-Manager, or Click and hold the From the small menu that pops up, click G-Manager. icon located on the taskbar until a ring appears. The G-Manager window appears, containing 7 tabs as described later. NOTE: Depending on your model, the actual items appearing on the screen may differ from those shown in this manual. 6-2 Using Getac Software System Tab The System tab provides system information. To view specific information, select the component from the list on the left side of the screen. The information of the selected component will be displayed on the right side of the screen. Using Getac Software 6-3 Battery Tab The Battery tab allows you to check the battery status and configure the battery. At most two batteries may be supported. Click Battery 1 or Battery 2 to view the information of each battery (if your model has a second battery). NOTE:
When the percentage % Left is less than 10% then the value will be displayed in red. When an abnormal battery condition is detected Battery Status value will be displayed in red. Battery Information The upper portion of the screen displays the current status of the selected battery. 6-4 Using Getac Software Charging Mode The lower left portion of the screen allows you to select the charging mode. Normal Mode The battery will be fully charged. When remaining charge reaches below 95%, then charging will start until it is fully charged. Economy Mode This mode helps prolong battery life by charging up to 80% of its total capacity only. It is highly recommended if you are using AC power most of the time. Gauge Reset The lower right portion of the screen contains the battery health bar and provides the battery calibration function. The health bar shows the batters health by percentage. A low percentage indicates poor health and therefore the need to perform a gauge reset to calibrate the batterys capacity and improve the batterys performance. The gauge reset process includes discharging and then fully recharging the battery in two cycles. It can take several hours. To perform a gauge reset:
1. Connect the AC adapter. 2. Click Start, located next to the health bar 3. In the pop-up dialog box, click Yes to start the process. The window as below appears displaying the progress bar. Using Getac Software 6-5 4. Wait till the process is completed. Click Exit when finished. ECO Tab The ECO tab allows you to configure ECO modes (or called power profiles). To put the system into an ECO mode, use the ECO button. (See Using the Quick Buttons in Chapter 2 for information.) 6-6 Using Getac Software ECO Information The left portion of the screen lists the available power profiles (Quick, Power Saving, and Work). Each profile is a combination of power settings that results in different power consumptions. To change the settings of a profile, select (highlight) the profile name in the list. Profile Settings The right portion of the screen displays the settings of the current selected profile. You can set up the following items:
WWAN, Bluetooth, and WLAN can be on or off. Power Scheme can be Balanced, High Performance or Power Saver. The settings here correspond to the settings in Windows. (See Windows Help for the description to each of the power scheme.) After changing the settings, click Apply or OK to save the changes. To restore the settings to the default values, click Default. Using Getac Software 6-7 Light Sensor Tab The Light Sensor tab allows you configure how the light sensor works. Sensor Mode The left portion of the screen lists the sensor modes:
Normal Light sensor sensitivity is set at normal environment lighting condition. Bright Light sensor sensitivity is set at bright environment lighting condition (e.g. outdoors). Dark Light sensor sensitivity is set at dark environment lighting condition (e.g. indoors, storage warehouse, etc.). Click to select a mode. Click Apply or OK to save the changes. 6-8 Using Getac Software Environment Illuminance To have the keypad backlight automatically turn on in poor lighting environment, click the checkbox Automatic Keyboard Backlit. Click Apply or OK to save the changes. Antenna Tab The Antenna tab allows you to set if your system will automatically use the external GPS or WWAN antenna when connected to the Docking Station. Select the checkbox(es) accordingly. Click Apply or OK to save the changes. Using Getac Software 6-9 Monitoring Tab The Monitoring tab allows you to configure the monitoring function of G-Manager. Items to Monitor The left portion of the screen lists the items. Click the checkbox before an item to include it as a monitored component. Click Apply or OK to save the changes. NOTE: Different models have different supported monitoring items;
non-supported items cannot be selected (grayed out items). Monitoring Options The right portion of the screen allows you to set how the monitored items are displayed and how often the monitoring is updated. Always On Top allows the monitoring window to remain on top of your display. 6-10 Using Getac Software Monitoring Interval sets the frequency of updates on the monitoring window (1/3/5/10/30 seconds or 1/5/30 minutes). Click Apply or OK to save the changes. Starting and Stopping the Monitoring To start monitoring, click START Monitor. The monitoring window similar to the one below appears displaying requested information at specified intervals. To stop monitoring, click the Close button at the upper right corner of the monitoring window or click Stop Monitor on the Monitoring tab page of G-Manager. Using Getac Software 6-11 GPS Status Tab The GPS Status tab shows the GPS status for models having the GPS module. To start GPS positioning, click Start GPS. The screen displays:
Ongoing raw data strings in the Message Log section Overhead satellite positions in the Satellite Map section Signal strength of the satellites in the Signal Indicator section When GPS positioning is completed, the Data Summary section shows the GPS information of the current location. To stop GPS positioning, click Stop GPS. 6-12 Using Getac Software Quick Button Definition Utility The P1 button has a pre-assigned function. You can re-define the button following this procedure:
NOTE: If you want to re-define P1, make sure the P1 Function item in the BIOS Setup Utility is set to Quick Btn (default setting). (See Advanced Menu in Chapter 5 for information.) 1. Right-click the Getac utility icon (
) on the Windows taskbar and select Quick Buttons Definition. 2. The following window appears. Click the Open button
. Using Getac Software 6-13 3. In the Open dialog box, browse to the destination folder and select the desired program file. Then, click Open to complete. 4. A matching program icon will appear in the settings window. NOTE: You can restore the quick buttons to the default settings by clicking Get Default. 6-14 Using Getac Software Chapter 7 Caring for the Computer Taking good care of your computer will ensure a trouble-free operation and reduce the risk of damage to your computer. This chapter gives you guidelines covering areas such as protecting, storing, cleaning, and traveling. Caring for the Computer 7-1 Protecting the Computer To safeguard the integrity of your computer data as well as the computer itself, you can protect the computer in several ways as described in this section. Using an Anti-Virus Strategy You can install a virus-detecting program to monitor potential viruses that could damage your files. Using Windows Action Center Windows Action Center alerts you to take action on the following security essentials:
Windows Firewall Windows Update Malware Protection (anti-virus, anti-spyware) Others (Internet security, user account control) For detailed information on Windows Security Center, see Windows Help. 7-2 Caring for the Computer Using the Cable Lock You can use a Kensington-type cable lock to protect your computer against theft. The cable lock is available in most computer stores. To use the lock, loop the lock cable around a stationary object such as a table. Insert the lock to the Kensington lock hole and turn the key to secure the lock. Store the key in a safe place. Caring for the Computer 7-3 Taking Care of the Computer Location Guidelines For optimal performance, use the computer where the recommended temperature is between 0 C (32 F) and 55 C (131 F). Avoid placing the computer in a location subject to high humidity, extreme temperatures, mechanical vibration, direct sunlight, or heavy dust. Using the computer in extreme environments for long periods can result in product deterioration and a shortened product life. Operating in an environment with metallic dust is not allowed. Place the computer on a flat and steady surface. Do not stand the computer on its side or store it in an upside-down position. A strong impact by dropping or hitting may damage the computer. Do not cover or block any ventilation openings on the computer. For example, do not place the computer on a bed, sofa, rug, or other similar surface. Otherwise, overheating may occur that results in damage to the computer. As the computer can become very hot during operation, keep it away from objects that are vulnerable to heat. Keep the computer at least 13 cm (5 inches) away from electrical appliances that can generate a strong magnetic field such as a TV, refrigerator, motor, or a large audio speaker. Avoid moving the computer abruptly from a cold to a warm place. A temperature difference of more than 10 C (18 F) may cause condensation inside the unit, which may damage the storage media. General Guidelines Do not place heavy objects on top of the computer when it is closed as this may damage the display. 7-4 Caring for the Computer The screen surface is easily scratched. Avoid touching it with a sharp object such as a pen or pencil. LCD image sticking occurs when a fixed pattern is displayed on the screen for a prolonged period of time. You can avoid the problem by limiting the amount of static content on the display. It is recommended that you use a screen saver or turn off the display when it is not in use. To maximize the life of the backlight in the display, allow the backlight to automatically turn off as a result of power management. Cleaning Guidelines Never clean the computer with its power on. Use a soft cloth moistened with water or a non-alkaline detergent to wipe the exterior of the computer. Gently wipe the display with a soft, lint-free cloth. Do not use alcohol or detergent on the display. Dust or grease on the touchpad can affect its sensitivity. Clean the pad by using adhesive tape to remove the dust and grease on its surface. If water or liquid is split onto the computer, wipe it dry and clean when possible. Though your computer is water-proof, do not leave the computer wet when you can dry it. If the computer gets wet where the temperature is 0C (32F) or below, freeze damage may occur. Make sure to dry the wet computer. Battery Pack Guidelines Recharge the battery pack when it is nearly discharged. When recharging, make sure that the battery pack is fully charged. Doing so may avoid harm to the battery pack. The battery pack is a consumable product and the following conditions will shorten its life:
when frequently charging the battery pack Caring for the Computer 7-5 when using, charging, or storing the battery in high temperature condition To avoid hastening the deterioration of the battery pack thereby prolonging its useful life, minimize the number of times you charge it so as not to frequently increase its internal temperature. Charge the battery pack between 10 C ~ 30 C (50 F ~ 86 F) temperature range. A higher environment temperature will cause the battery packs temperature to rise. Avoid charging the battery pack inside a closed vehicle and in hot weather condition. Also, charging will not start if the battery pack is not within the allowed temperature range. It is recommended that you do not charge the battery pack more than once a day. It is recommended that you charge the battery pack with the computers power off. To maintain the battery packs operating efficiency, store it in a cool dark place removed from the computer and with 30 % ~ 40 % charge remaining. Important guidelines when using the battery pack. When installing or removing the battery pack take note of the following:
avoid installing or removing the battery pack when the computer is in Sleep mode. Abruptly removing the battery pack may cause loss of data or the computer may become unstable. avoid touching the battery pack terminals or damage may occur, thereby causing improper operation to it or the computer. The computers input voltage and surrounding temperature will directly affect the battery packs charge and discharge time:
charging time will be prolonged when the computer is turned on. To shorten the charging time, it is recommended that you place the computer in sleep or hibernation mode. a low temperature will prolong the charging time as well as hasten the discharge time. 7-6 Caring for the Computer When using battery power in an extremely low temperature environment, you may experience shortened operating time and incorrect battery level reading. This phenomenon comes from the chemical characteristics of batteries. The appropriate operating temperature for the battery is -10 C ~ 50 C (14 F ~ 122 F). Touchscreen Guidelines Use the finger or the included touchscreen pen on the display. Using a sharp or metallic object other than your finger or touchscreen pen may cause scratches and damage the display, thereby causing errors. Avoid using excessive force that may cause damage to the display. Use a soft cloth to remove dirt on the display. The touchscreen surface has a special protective coating that prevents dirt from sticking to it. Not using a soft cloth may cause damage to the special protective coating on the touchscreen surface. Turn off the computer power when cleaning the display. Cleaning the display with the power on may cause improper operation. Do not use excessive force on the display. Avoid moving the computer while holding the display or twisting the display. Avoid placing objects on top of the display as this may cause the glass to break thereby damaging the display. Using the touchscreen during low temperature (less than 5oC) may cause a slower response time, this is normal. A normal response time may be restored upon returning to room temperature. When there is a noticeable discrepancy in the placement of the stylus on the screen and the indicated position of the onscreen pointer, use the calibration utility to recalibrate the touchscreen display. Caring for the Computer 7-7 When Traveling Before traveling with your computer, make a backup of your hard disk data into flash disks or other storage devices. As an added precaution, bring along an extra copy of your important data. Make sure that the battery pack is fully charged. Make sure that the computer is turned off and the top cover is securely closed. Make sure that all the connector covers are closed completely to ensure the waterproof integrity. Do not leave objects in between the keyboard and closed display. Disconnect the AC adapter from the computer and take it with you. Use the AC adapter as the power source and as a battery-charger. Hand-carry the computer. Do not check it in as luggage. If you need to leave the computer in the car, put it in the trunk of the car to avoid exposing the computer to excessive heat. When going through airport security, it is recommended that you send the computer and flash disks through the X-ray machine (the device you set your bags on). Avoid the magnetic detector (the device you walk through) or the magnetic wand (the handheld device used by security personnel). If you plan to travel abroad with your computer, consult your dealer for the appropriate AC power cord for use in your country of destination. 7-8 Caring for the Computer Chapter 8 Troubleshooting Computer problems can be caused by hardware, software, or both. When you encounter any problem, it might be a typical problem that can easily be solved. This chapter tells you what actions to take when solving common computer problems. Troubleshooting 8-1 Preliminary Checklist Here are helpful hints to follow before you take further actions when you encounter any problem:
Try to isolate which part of the computer is causing the problem. Make sure that you turn on all peripheral devices before turning on the computer. If an external device has a problem, make sure that the cable connections are correct and secure. Make sure that the configuration information is properly set in the BIOS Setup program. Make sure that all the device drivers are correctly installed. Make notes of your observations. Are there any messages on the screen?
Do any indicators light? Do you hear any beeps? Detailed descriptions are useful to the service personnel when you need to consult one for assistance. If any problem persists after you follow the instructions in this chapter, contact an authorized dealer for help. 8-2 Troubleshooting Solving Common Problems Battery Problems The battery does not charge (Battery Charge indicator does not light amber). Make sure that the AC adapter is properly connected. Make sure that the battery is not too hot or cold. Allow time for the battery pack to return to room temperature. If the battery doesn't charge after it has been stored in very low temperatures, try disconnecting and reconnecting the AC adapter to solve the problem. Make sure that the battery pack is installed correctly. Make sure that the battery terminals are clean. The operating time of a fully charged battery becomes shorter. If you often partially recharge and discharge, the battery might not be charged to its full potential. Initialize the battery to solve the problem.
(See Initializing the Battery Pack in Chapter 3 for instructions.) The battery operating time indicated by the battery meter does not match the actual operating time. The actual operating time can be different from the estimated time, depending on how you are using the computer. If the actual operating time is much less than the estimated time, initialize the battery. (See Initializing the Battery Pack in Chapter 3 for instructions.) Bluetooth Wireless Transmission Problems I cannot connect to another device with Bluetooth wireless technology. Make sure that both devices have activated Bluetooth feature. Troubleshooting 8-3 Make sure that the distance between the two devices is within the limit and that there are no walls or other obstructions between the devices. Make sure that the other device is not in Hidden mode. Make sure that both devices are compatible. Display Problems Nothing appears on the screen. During operation, the screen may automatically turn off as a result of power management. Press any key to see if the screen comes back. The brightness level might be too low. Increase brightness. The display output might be set to an external device. To switch the display back to the LCD, press the Fn+F5 hot key or change the display through the Display Settings Properties. The characters on the screen are dim. Adjust the brightness and/or contrast. The display brightness cannot be increased. As a protection, the display brightness will be fixed at a low level when the surrounding temperature is too high or too low. It is not a malfunction in this situation. Bad dots appear on the display at all times. A small number of missing, discolored, or bright dots on the screen are an intrinsic characteristic of TFT LCD technology. It is not regarded as a LCD defect. The external monitor displays nothing. Make sure that the monitor is turned on. Make sure that the monitors signal cable is properly connected. Switch the display to the monitor by pressing the Fn+F5 hot key or change the display through the Display Settings Properties. 8-4 Troubleshooting Simultaneous display/multi-display does not work. Make sure that you turn on the external monitor before turning on the computer. ress the Fn+F5 hot key to toggle through the display options or change the Display Settings Properties in Windows. DVD Drive Problems The DVD drive cannot read a disc. Make sure that the disc is correctly seated in the tray, with the label facing up. Make sure that the disc is not dirty. Clean the disc with a disc cleaning kit, available in most computer stores. Make sure that the computer supports the disc or the files contained. You cannot eject a disc. The disc is not properly seated in the drive. Manually release the disc by inserting a small rod, such as a straightened paperclip, into the drives manual eject hole and pushing firmly to release the tray Hardware Device Problems The computer does not recognize a newly installed device. The device may not be correctly configured in the BIOS Setup program. Run the BIOS Setup program to identify the new type. Troubleshooting 8-5 Make sure if any device driver needs to be installed. (Refer to the documentation that came with the device.) Make sure if the device needs any jumper or switch settings. (Refer to the documentation that came with the device.) Check the cables or power cords for correct connections. For an external device that has its own power switch, make sure that the power is turned on. Hard Disk Drive Problems The hard disk drive error message appears on the screen. The hard disk drive has defects. Ask your dealer for help. The hard disk drive operations seem slow. The data files stored on the hard disk drive may be fragmented. Use a tool such as Windows Disk Defragmenter to defragment the files. The hard disk drive in-use indicator glows without blinking. The data files stored on the hard disk drive may be fragmented. Use a tool such as Windows Disk Defragmenter to defragment the files. Keyboard, Mouse, and Touchpad Problems The keyboard does not respond. Try connecting an external keyboard. If it works, contact an authorized dealer, as the internal keyboard cable might be loose. Water or liquid is spilt into the keyboard. Immediately turn off the computer and unplug the AC adapter. Then turn the keyboard upside down to drain the liquid out of the keyboard. Make sure to clean up any part of the spill you can get to. Though the keyboard of your computer is spill-proof, liquid will remain in the keyboard enclosure if you dont remove it. Wait for the keyboard to air dry before using the computer again. 8-6 Troubleshooting The numeric keypad is disabled. Make sure that the Num Lock is switched on. (Check if the Num Lock Indicator glows or not.) The external keyboard does not work. Make sure that the keyboard cable is properly connected. The USB mouse does not work. Make sure that the mouse cable is properly connected. The touchpad does not work, or the pointer is difficult to control with the touchpad. Make sure that the touchpad is clean. LAN Problems I cannot access the network. Make sure that the LAN cable is properly connected to the RJ-45 connector and the network hub. Make sure that the network configuration is appropriate. Make sure that the user name or password is correct. Power Management Problems The computer does not enter Sleep or Hibernation mode automatically. If you have a connection to another computer, the computer does not enter Sleep or Hibernation mode if the connection is actively in use. Make sure that the Sleep or Hibernation time-out is enabled. The computer does not enter Sleep or Hibernation mode immediately. If the computer is performing an operation, it normally waits for the operation to finish. Troubleshooting 8-7 The computer does not resume from Sleep or Hibernation mode. The computer automatically enters Sleep or Hibernation mode when the battery pack is empty. Do any one of the following:
Connect the AC adapter to the computer. Replace the empty battery pack with a fully charged one. The computer does not enter Hibernation mode with the Fn+F12 hot keys. Make sure that the Hibernation function is specified for the sleep button. You might be using a PC or other card that prevents the computer from entering Hibernation mode. To enter the mode, stop the communication program and then remove the card or stop the card. Software Problems An application program does not work correctly. Make sure that the software is correctly installed. If an error message appears on the screen, consult the software programs documentation for further information. If you are sure the operation has stop, reset the computer. (See Resetting the Computer later in this chapter.) Sound Problems No sound is produced. Make sure that the volume control is not set too low. Make sure that the computer is not in Sleep mode. If using an external speaker, make sure that the speaker is properly connected. 8-8 Troubleshooting Distorted sound is produced. Make sure that the volume control is not set too high or too low. In most cases, a high setting can cause the audio electronics to distort the sound. The sound system does not record. Adjust the playback or recording sound levels. The external microphone or audio device does not work. Make sure that the microphone is connected to the proper connector on the computer. Click the speaker symbol on the taskbar and check the Windows volume control. Check the volume control of your computer. Startup Problems When you turn on the computer, it does not seem to respond. Make sure that either the AC adapter is connected or the battery has power.
) lights amber to indicate the heater is on. Wait till the heating is For models with the hard disk drive heater option: When turning on the computer in an extremely low temperature environment, the computer will heat up the hard disk before starting up. The HDD Heater indicator
finished. However, if external AC power is not available and the remaining battery power is too low for the heating to complete, the computer may not start up. In case the computer fails to start up, turn off the computer and leave it in room temperature for about an hour before trying to turn it on again. When you turn on the computer, it stops after POST. Restart your computer. Troubleshooting 8-9 WLAN Problems I cannot use the WLAN feature. Make sure that the mini PCI-E WLAN card is correctly installed. Make sure that the WLAN feature is turned on. Transmission quality is poor. Your computer may be in an out-of-range situation. Move your computer closer to the Access Point or another WLAN device it is associated with. Check if there is high interference around the environment and solve the problem as described next. Radio interference exists. Move your computer away from the device causing the radio interference such as microwave oven and large metal objects. Plug your computer into an outlet on a different branch circuit from that used by the affecting device. Consult your dealer or an experienced radio technician for help. I cannot connect to another WLAN device. Make sure that the WLAN feature is turned on. Make sure that the SSID setting is the same for every WLAN device in the network. Your computer is not recognizing changes. Restart the computer. Make sure that the IP address or subnet mask setting is correct. I cannot communicate with the computer in the network when Infrastructure mode is configured. Make sure that the Access Point your computer is associated with is powered on and all the LEDs are working properly. If the operating radio channel is in poor quality, change the Access Point and all the wireless station(s) within the BSSID to another radio channel. 8-10 Troubleshooting Your computer may be in an out-of-range situation. Move your computer closer to the Access Point it is associated with. Make sure that your computer is configured with the same security option (encryption) to the Access Point. Use the Web Manager/Telnet of the Access Point to check whether it is connected to the network. Reconfigure and reset the Access Point. I cannot access the network. Make sure that the network configuration is appropriate. Make sure that the user name or password is correct. You have moved out of range of the network. Turn off power management. Other Problems The date/time is incorrect. Correct the date and time via the operating system or BIOS Setup program. After you have performed everything as described above and still have the incorrect date and time every time you turn on the computer, the RTC (Real-Time Clock) battery is at the end of its life. Call an authorized dealer to replace the RTC battery. Troubleshooting 8-11 Resetting the Computer You may have to reset (reboot) your computer on some occasions when an error occurs and the program you are using hangs up. If the computer operation seems to hang up, first wait. It is possible that the computer is processing data. Periodically check the hard disk drive in-use indicator, if it flashes irregularly, the program may be accessing data and preventing you from using the keyboard. If you are sure the operation has stopped and you cannot use the restart function of the operating system, reset the computer. Reset the computer by any one of these methods:
Press Ctrl+Alt+Del on the keyboard. If the above action does not work, press and hold the power button for more than 5 seconds to force the system to turn off. Then turn on the power again. CAUTION: Resetting will cause any unsaved data to be lost. 8-12 Troubleshooting Appendix A Specifications NOTE: Specifications are subject to change without any prior notice. Parts Specifications CPU Chipset BIOS RAM Display Panel Intel Ivy Bridge 17W (BGA), without fan, 3MB L3 cach3 Intel Ivy Bridge 35W (BGA), with fan, 4MB L3 cach3 Intel QM77, dual channel support 16 MB EEPROM, ACPI, TPM, vPro Up to 32GB, 2 204-pin SO-DIMM sockets for 4GB/8GB/16GB DDRIII, 1333/1600 MHz, 1.25-inch height 13.3-inch (16:9) TFT LCD, resolution up to 1366768 WXGA, 700nits with protection glass, with light sensor as default feature, sunlight-readable (1200 nits) touchscreen (option) Video controller Intel HD Graphics 4000 Audio Features Azalia interface, 2 channel analog output, internal microphone Speaker Microphone Keyboard 2 watt (8 ohm) stereo 2 Integrated microphone Standard keys with numeric pad keys, 12 function keys, special Fn (Function) key and Windows keys, with water-proof membrane or backlight (option) Pointing device Glide touchpad with 2 buttons, scroll bar Storage device Hard disk drive SATA 3 interface, 2.5-inch diameter, 7mm/9.5 mm height, 5400 rpm support, 500GB, G-sensor, shock-mounted, user-removable, solid-state disk (option), automotive hard disk drive (option), low temperature -20 oF (-29 oC) up to 140 oF (60 oC) (option) DVD drive SATA interface, Super-Multi DVD drive, 12.7mm height, Card slots Card Reader 3-in-1 (SD/ MMC/MMC Plus) PCMCIA CardBus Type II ExpressCard/34/54 Smart Card Specifications A-1 Parts Specifications I/O ports Modem LAN USB 3.0 2, USB 2.0, eSATA II/ USB 3.0 combo, RS232 x 2, RJ-11, RJ-45, mini IEEE 1394a, analog VGA, HDMI, headphone out, microphone in, docking Azalia interface, 56 Kbps, V.90 MDC 1.5 internal fax modem Intel 82579LM Gigabit Network , 10/100/1000 Mbps Wireless LAN + Bluetooth Jason Peak 2 Advanced-N 6235 (BT4.0 combo), 802.11 a/g/n GPS (option) WWAN (option) Security Power AC adapter Battery Dimension (LxWH) Weight GPS module, GPS pass-through 3G or 4G LTE, WWAN minicard, external accessible SIM card slot Kensington lock TPM 1.2 Fingerprint scanner Smart Card Reader Universal AC adapter 90 W; input: 100240 V, output: 19 V Li-ion smart battery 9-cell 8700 mAH / 10.8 V 33329367.5 mm (13.1111.542.66 inch) with handle 3.88 kg (8.55 lb) A-2 Specifications Appendix B Regulatory Information This appendix provides regulatory statements and safety notices on your computer. NOTE: Marking labels located on the exterior of your computer indicate the regulations that your model complies with. Please check the marking labels and refer to the corresponding statements in this appendix. Some notices apply to specific models only. Regulatory Information B-1 On the Use of the System Class B Regulations USA Federal Communications Commission Radio Frequency Interference Statement NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacturer could void the users authority to operate the equipment. Please note:
The use of a non-shielded interface cable with this equipment is prohibited. B-2 Regulatory Information Canada Canadian Department of Communications Radio Interference Regulations Class B Compliance Notice This Class B digital apparatus meets all requirements of the Canada Interference-Causing equipment regulations. Cet appareil numrique de Classe B respecte toutes les exigences du Rglement Canadien sur le matriel brouileur. This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le prsent appareil numrique nmet pas de bruits radiolectriques dpassant les limites applicables aux appareils numriques de la classe B prescrites dans le Rglement sur le brouillage radiolectrique dict par le ministre des Communications du Canada. Safety Notices About the Battery Keep the battery pack out of the reach of children. Caution Texts Concerning Lithium Batteries DANISH ADVARSEL! Lithiumbatteri Eksplosionsfare ved fejlagtig hndtering. Udskiftning m kun ske med batteri af samme fabrikat og type. Levr det brugte batteri tilbage til leverandren. NORWEGIAN ADVARSEL: Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme batteritype eller en tilsvarende type anbefalt av apparatfabrikanten. Brukte batterier kasseres i henhold til fabrikantens instruksjoner. SWEDISH VARNING: Explosionsfara vid felaktigt batteribyte. Anvnd samma batterityp eller en ekvivalent typ som rekommenderas av apparattillverkaren. Kassera anvnt batteri enligt fabrikantens instruktion. Regulatory Information B-3 FINNISH VAROITUS: Paristo voi rjht, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan valmistajan suosittelemaan tyyppiin. Hvit kytetty paristo valmistajan ohjeiden mukaisesti. ENGLISH CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the equipment manufacturer. Discard used batteries according to manufacturer's instructions. DEUTSCH VORSICHT: Explosionsgefahr bei unsachgemem Austausch der Batterie. Ersatz nur durch denselben oder einen vom Hersteller empfohlenen gleich-wertigen Typ. Entsorgung gebrauchter Batterien nach Angaben des Herstellers. FRENCH ATTENTION: II y a danger dexplosion sil y a remplacement incorrect de la batterie. Remplacer uniquement avec une batterie du mme type ou dun type quivalent recommand par le constructeur. Mettre au rebut les batteries usages conformment aux instructions du fabricant. Attention (for USA Users) The product that you have purchased contains a rechargeable battery. The battery is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal. About the AC Adapter Use only the AC adapter supplied with your computer. Use of another type of AC adapter will result in malfunction and/or danger. Do not use the adapter in a high moisture environment. Never touch the adapter when your hands or feet are wet. Allow adequate ventilation around the adapter when using it to operate the device or charge the battery. Do not cover the AC adapter with B-4 Regulatory Information paper or other objects that will reduce cooling. Do not use the AC adapter while it is inside a carrying case. Connect the adapter to a proper power source. The voltage requirements are found on the product case and/or packaging. Do not use the adapter if the cord becomes damaged. Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to excess moisture. Option UL1604 Instruction INSTALLATION INSTURCTIONS:
Installation instructions are provided with each device and shall include the following or equivalent wording:
This equipment is suitable for use in Class I, Division 2, Groups A, B, C and D OR non-hazardous locations only. WARNING EXPLOSION HAZARD Do not disconnect equipment unless power has been removed or the area is known to be non-hazardous. WARNING EXPLOSION HAZARD - Substitution of components may impair suitability for Class I, Division 2. WARNING - EXPLOSION HAZARD - External Connections/Hubs are not to be used in a Hazardous Location. WARNING - EXPLOSION HAZARD - Notebook is to be only powered from the battery pack while in Hazardous Locations. Regulatory Information B-5 On the Use of the RF Device NOTE: The information in this section applies to models with the wireless LAN module. USA and Canada Safety Requirements and Notices IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Radio Frequency Interference Requirements and SAR The FCC with its action in ET Docket 93-62 has adopted a safety standard for human exposure to Radio Frequency (RF) electromagnetic energy emitted by FCC certified equipment. The wireless LAN module meets the Human Exposure limits found in OET Bulletin 65, 2001, and ANSI/IEEE C95.1, 1992. Proper operation of this radio according to the instructions found in this manual will result in exposure substantially below the FCCs recommended limits. The following safety precautions should be observed:
Do not touch or move antenna while the unit is transmitting or receiving. Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face or eyes, while transmitting. Do not operate the radio or attempt to transmit data unless the antenna is connected; if not, the radio may be damaged. Use in specific environments:
The use of wireless devices in hazardous locations is limited by the constraints posed by the safety directors of such environments. B-6 Regulatory Information The use of wireless devices on airplanes is governed by the Federal Aviation Administration (FAA). The use of wireless devices in hospitals is restricted to the limits set forth by each hospital. Antenna use:
In order to comply with FCC RF exposure limits, low gain integrated antennas should be located at a minimum distance of 20 cm (8 inches) or more from the body of all persons. High-gain, wall-mount, or mast-mount antennas are designed to be professionally installed and should be located at a minimum distance of 30 cm (12 inches) or more from the body of all persons. Please contact your professional installer, VAR, or antenna manufacturer for proper installation requirements. Explosive Device Proximity Warning WARNING: Do not operate a portable transmitter (such as a wireless network device) near unshielded blasting caps or in an explosive environment unless the device has been modified to be qualified for such use. Antenna Warning WARNING: To comply with the FCC and ANSI C95.1 RF exposure limits, it is recommended that the antenna for this device be installed so as to provide a separation distance of at least 20 cm (8 inches) from all persons and that the antenna must not be co-located or operating in conjunction with any other antenna or radio transmitter. It is recommended that the user limit exposure time if the antenna is positioned closer than 20 cm (8 inches). Use on Aircraft Caution CAUTION: Regulations of the FCC and FAA prohibit airborne operation of radio-frequency wireless devices because their signals could interfere with critical aircraft instruments. Regulatory Information B-7 EMC Requirements This device uses, generates and radiates radio frequency energy. The radio frequency energy produced by this device is well below the maximum exposure allowed by the Federal Communications Commission (FCC). This device complies with the limits for a Class B digital device pursuant to Part 15 subpart C of the FCC Rules and Regulations. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. The FCC limits are designed to provide reasonable protection against harmful interference when the equipment is installed and used in accordance with the instruction manual and operated in a commercial environment. However, there is no guarantee that interference will not occur in a particular commercial installation, or if operated in a residential area. If harmful interference with radio or television reception occurs when the device is turned on, the user must correct the situation at the users own expense. The user is encouraged to try one or more of the following corrective measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION: The Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by the manufacturer could void the users authority to operate this device. B-8 Regulatory Information Canada Radio Frequency Interference Requirements To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Pour empcher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit tre utilis l'intrieur et devrait tre plac loin des fentres afin de fournir un cran de blindage maximal. Si le matriel (ou son antenne d'mission) est install l'extrieur, il doit faire l'objet d'une licence. European Union CE Marking and Compliance Notices Statements of Compliance English This product follows the provisions of the European Directive 1999/5/EC. Danish Dette produkt er i overensstemmelse med det europiske direktiv 1999/5/EC. Dutch Dit product is in navolging van de bepalingen van Europees Directief 1999/5/EC. Finnish Tm tuote noudattaa EU-direktiivin 1999/5/EC mryksi. French Ce produit est conforme aux exigences de la Directive Europenne 1999/5/EC. German Dieses Produkt entspricht den Bestimmungen der Europischen Richtlinie 1999/5/EC. Regulatory Information B-9 Greek To 1999/5/EC. Icelandic essi vara stenst regluger Evrpska Efnahags Bandalagsins nmer 1999/5/EC. Italian Questo prodotto conforme alla Direttiva Europea 1999/5/EC. Norwegian Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 1999/5/EC. Portuguese Este produto cumpre com as normas da Diretiva Europia 1999/5/EC. Spanish Este producto cumple con las normas del Directivo Europeo 1999/5/EC. Swedish Denna produkt har tillverkats i enlighet med EG-direktiv 1999/5/EC. Local Restrictions of 802.11a/g/n Radio Usage CAUTION: Due to the fact that the frequencies used by 802.11a/g/n wireless LAN devices may not yet be harmonized in all countries, 802.11a/g/n products are designed for use only in specific countries or regions, and is not allowed to be operated in countries or regions other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries or regions for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country or region of use. Any deviation from permissible settings and restrictions in the country or region of use could be an infringement of local law and may be punished as such. The European variant is intended for use throughout the European Economic Area. However, authorization for use is further restricted in particular countries or regions within countries, as follows:
B-10 Regulatory Information General European standards dictate maximum radiated transmit power of 100 mW Effective Isotropic Radiated Power (EIRP) and the frequency range 2400 2483.5 MHz. Belgium and the Netherlands In Belgium and the Netherlands, the product may not be used outdoors. See the instructions next under the heading Turning Off the Wireless LAN Radio. France Departments in Which the Wireless LAN Module Can Be Used (Indoors Only) The wireless LAN module can currently be used indoors only in the following 38 departments of mainland France. Please turn off your wireless LAN radio when operating the device in areas/places other than the 38 departments listed:
Indre Indre et Loire Loir et Cher Loire Loiret 36 37 41 42 45 50 Manche 55 Meuse 58 Nivre 59 Nord 60 Oise 61 Orne 63 64 Puy du Dme Pyrnes Atlantique Pyrnes Bas Rhin 66 67 68 Haut Rhin 70 Haute Sane 71 75 82 84 88 89 90 94 Sane et Loire Paris Tarn et Garonne Vaucluse Vosges Yonne Territoire de Belfort Val de Marne 01 Ain Orientales 02 Aisne 03 Allier 05 Hautes Alpes 08 Ardennes 09 Arige 11 Aude 12 Aveyron 16 Charente 24 Dordogne 25 Doubs 26 Drme 32 Gers Regulatory Information B-11 Departments in Which the Wireless LAN Modules Maximum EIRP Not Shown in the Previous Table Frequency Ranges (MHz) 2400 2446.5 2446.5 2483.5 Indoors 10 mW 100 mW Outdoors Not permitted 100 mW on private property with Ministry of Defense approval Turning Off the Wireless LAN Radio NOTE: Turning the wireless LAN radio off is not the same as disabling the wireless LAN card. It is not necessary to disable the card to meet the regulatory requirements. While operating the computer in those French departments that do not allow use of the wireless LAN equipment, the user of the equipment must turn off the wireless LAN radio in order to comply with local regulations. B-12 Regulatory Information
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2012-11-21 | 1852.4 ~ 1907.5 | PCB - PCS Licensed Transmitter | Class II permissive change or modification of presently authorized equipment |
2 | 2012-11-12 | 1852.4 ~ 1907.5 | PCB - PCS Licensed Transmitter | Change in identification of presently authorized equipment. Original FCC ID: N7NMC8355 Grant Date: 08/24/2010 |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2012-11-21
|
||||
1 2 |
2012-11-12
|
|||||
1 2 | Applicant's complete, legal business name |
Getac Technology Corporation
|
||||
1 2 | FCC Registration Number (FRN) |
0018268243
|
||||
1 2 | Physical Address |
5F.,Building A,No.209,Sec.1 Nangang.,Rd.
|
||||
1 2 |
Taipei City, N/A 11568
|
|||||
1 2 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
c******@curtis-straus.com
|
||||
1 2 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
QYL
|
||||
1 2 | Equipment Product Code |
320GOBI3
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
K****** C********
|
||||
1 2 | Telephone Number |
+886-******** Extension:
|
||||
1 2 | Fax Number |
+886-********
|
||||
1 2 |
k******@getac.com.tw
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 05/20/2013 | ||||
1 2 | 05/11/2013 | |||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | PCB - PCS Licensed Transmitter | ||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WWAN Module | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Limited Single Modular Approval | ||||
1 2 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 | Change in identification of presently authorized equipment. Original FCC ID: N7NMC8355 Grant Date: 08/24/2010 | |||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Class II Permissive Change for adding a portable NB host (Getac NB, Model: B320) as described in this filing. Power Output listed is Conducted. The highest radiated power measured in specific configurations shown in filing is Part 22 1.584W ERP, Part 24 1.622W EIRP, Part 27 0.446W EIRP. This device contains 900/1800/2100 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited Modular Approval for use as a module in only Mobile or Fixed exposure conditions. Antenna gain including cable loss must not exceed 4dBi in Cellular 800MHz band and 3.5dBi in PCS 1900MHz/AWS 1700MHz bands for purposes of 2.1043 and 2.1091. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and may be co-located and operated in conjunction with antennas or transmitters within the parameters documented in the Mobile RF exposure documentation of this filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products requires the submission of a Class II permissive change application, where appropriate; and containing data demonstrating compliance for SAR, MPE, spurious emissions, ERP/EIRP, and host/module authentication, or new application. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 2 | Power Output listed is Conducted. The highest radiated power measured in specific configurations shown in filing is Part 22 1.584W ERP, Part 24 1.622W EIRP, Part 27 0.446W EIRP. This device contains 900/1800/2100 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited Modular Approval for use as a module in only Mobile or Fixed exposure conditions. Antenna gain including cable loss must not exceed 4dBi in Cellular 800MHz band and 3.5dBi in PCS 1900MHz/AWS 1700MHz bands for purposes of 2.1043 and 2.1091. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and may be co-located and operated in conjunction with antennas or transmitters within the parameters documented in the Mobile RF exposure documentation of this filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products requires the submission of a Class II permissive change application, where appropriate; and containing data demonstrating compliance for SAR, MPE, spurious emissions, ERP/EIRP, and host/module authentication, or new application. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
||||
1 2 | Name |
R******** C********
|
||||
1 2 | Telephone Number |
+886-******** Extension:
|
||||
1 2 | Fax Number |
+886-********
|
||||
1 2 |
r******@tw.bureauveritas.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 22H | BC | 824.2 | 848.8 | 2.01 | 2.5 ppm | 248KGXW | |||||||||||||||||||||||||||||||||
1 | 2 | 22H | BC | 824.2 | 848.8 | 0.531 | 2.5 ppm | 248KG7W | |||||||||||||||||||||||||||||||||
1 | 3 | 22H | BC | 826.4 | 846.6 | 0.281 | 2.5 ppm | 4M19F9W | |||||||||||||||||||||||||||||||||
1 | 4 | 22H | BC | 824.7 | 848.31 | 0.29 | 2.5 ppm | 1M28F9W | |||||||||||||||||||||||||||||||||
1 | 5 | 24E | BC | 1850.2 | 1909.8 | 1.199 | 2.5 ppm | 250KGXW | |||||||||||||||||||||||||||||||||
1 | 6 | 24E | BC | 1850.2 | 1909.8 | 0.537 | 2.5 ppm | 245KG7W | |||||||||||||||||||||||||||||||||
1 | 7 | 24E | BC | 1852.4 | 1907.5 | 0.294 | 2.5 ppm | 4M19F9W | |||||||||||||||||||||||||||||||||
1 | 8 | 24E | BC | 1851.25 | 1908.75 | 0.287 | 2.5 ppm | 1M28F9W | |||||||||||||||||||||||||||||||||
1 | 9 | 27 | 1712.4 | 1752.6 | 0.287 | 2.5 ppm | 4M15F9W | ||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 22H | BC | 824.2 | 848.8 | 2.01 | 2.5 ppm | 248KGXW | |||||||||||||||||||||||||||||||||
2 | 2 | 22H | BC | 824.2 | 848.8 | 0.531 | 2.5 ppm | 248KG7W | |||||||||||||||||||||||||||||||||
2 | 3 | 22H | BC | 826.4 | 846.6 | 0.281 | 2.5 ppm | 4M19F9W | |||||||||||||||||||||||||||||||||
2 | 4 | 22H | BC | 824.7 | 848.31 | 0.29 | 2.5 ppm | 1M28F9W | |||||||||||||||||||||||||||||||||
2 | 5 | 24E | BC | 1850.2 | 1909.8 | 1.199 | 2.5 ppm | 250KGXW | |||||||||||||||||||||||||||||||||
2 | 6 | 24E | BC | 1850.2 | 1909.8 | 0.537 | 2.5 ppm | 245KG7W | |||||||||||||||||||||||||||||||||
2 | 7 | 24E | BC | 1852.4 | 1907.5 | 0.294 | 2.5 ppm | 4M19F9W | |||||||||||||||||||||||||||||||||
2 | 8 | 24E | BC | 1851.25 | 1908.75 | 0.287 | 2.5 ppm | 1M28F9W | |||||||||||||||||||||||||||||||||
2 | 9 | 27 | BC | 1712.4 | 1752.6 | 0.287 | 2.5 ppm | 4M15F9W |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC