Manual of JJ-RC-SM24-LT Description:
Frequency: 310mhz315mhz318mhz372mhz390mhz etc. Working current: 13ma2ma Operation Open the sliding cover, you will see the program button and Dip Switch. How to select the brand?
Press the program button, release the button until LED lights. Select a button to program. According follows table to select brand. Press button__ times ensuring LED stops flashing after each press. Then press another button to confirm. LED flashes, select brand is successfully. NOTE: Button 1 and Button 2 is independly. It can select different brand and frequency.
#of times to press button Brand Type/Color of Smart/Learn Frequency 1 2 3 4 5 6 7 8 9 10 11 12 Linear Chamberlain Chamberlain Chamberlain Genie Genie Stanley Liftmaster Overhead door Overhead door Wayne Dalton Chamberlain Chamberlain Genie Mega code Orange Purple Green Intelli code Intelli code Secure Code Frequency hopping to avoid Frequency interference Rolling code 9 Position 9 Position 12 Position 318M 390M 315M 390M 315M 390M 310M 310/315/390 372.5M 390M 315M 390M 13 14 15 16 17 18 Linear Multicode Chamberlain Stanley/Multicode Genie Linear Chamberlain Moore-O-Matic 10 Position 8 Position 10 Position 9 Position 8 Position 7 Position 300M 390M 310M 390M 310M 390M FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.