QUICK START GUIDE E300BT Languages x 1: EN E300BT QUICK START GUIDE www.onkyo.com 2015 Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Gibson Innovations Netherlands B.V. Building Box size: W95 x H150 x D25 mm QSG size: W89 x H144 mm( Folded) Binding: 1. Folded / 2. Glue / 3.Saddle stitch Sleeve size: W210 x H50 mm QSG (A1/B1) - Print color: 2 colors ( Black + PMS186c) Revised illustration_EN (2015.07.20) EN Quick start guide On/O button, Music/Call control Volume/
Track control Micro USB charging slot Microphone LED indicator light
[ 1.0 Charge the battery ]
1. Plug one end of USB cable into the charger (or into the USB port of a computer). 2. Plug the other end of the cable into the micro USB charging slot on the headset. 3. When the headset is charging, a white indicator light will be displayed. 4. When the headset is fully charged, the white light goes o.
[ 2.0 Turn on and o the headset ]
1. Turn the headset on. Press and hold for 2 sec. 2. Turn the headset o. Press and hold for 4 sec. A white indicator light turns on for 1.5 sec. and then the headset will turn o.
[ 3.0 Pair the headset with your phone ]
Pair the headset with your phone manually or by using NFC. After successful pairing, the headset connects automatically to the phone once the headset is turned on and within range.
[ 3.1 Manual Pairing ]
10:30 10:31 10:32 Connectivity Settings Settings Connectivity Settings Bluetooth Add Bluetooth device Devices Found Onkyo E300BT Enter Password
****
0000 1. Make sure your headset is turned o. 2. Press and hold until an alternating blue and white light ashes. 3. Turn on the Bluetooth function on your phone. 4. Your phone will start searching for Onkyo E300BT. 5. Follow the on-screen instructions to pair your phone.
(Check your phones user manual for details) Select Back Select Back Select Back 0000 not required for some mobile phones
[ 3.2 NFC Pairing ]
1. Make sure you turn on the NFC function on your phone and that your phones screen remains active. 2. Place your phone over the NFC detection area at the back of the in-line control. 3. Follow the pairing instructions of your phone. If a passcode is required, enter 0000. NFC detection area Remarks:
Make sure your mobile phone has the NFC feature and that the NFC function has been switched on and your phone is not in standby mode.
Pairing with NFC is suitable only for Android mobile operating system 4.2 or above.
Refer to your phones user manual to identify its NFC detection area.
[ 4.0 Use music and call controls ]
MUSIC CONTROLS CALL CONTROLS Play/Pause Volume up Press once Press once Skip forward Long Press Volume down Press once Skip backward Long Press Pick up call/Hang up Press once Reject incoming call Switch caller while in a call Press & hold for 2 sec. Press twice Mute/unmute the mic while in a call Press once
[ 5.0 LED Indicator light ]
A white light triple ashes every 10 seconds. The battery is low. An alternating white and blue light ashes. The headset is in pairing mode. A blue light ashes at every 8 seconds. The headset is both paired & connected. A blue light ashes rapidly. The headset is switched on but not connected. If no connection can be made, the headset will turn o itself after 5 minutes. Please refer to www.onkyo.com/welcome for the full user manual English:
Notice of compliance The device complies with the FCC rules, Part 15. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC rules This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between equipment and receiver. Relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Canada:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following Two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3(B)/NMB-3(B) IC Radiation Exposure Statement:
This equipment complies with Canada radiation exposure limits set forth for uncontrolled environments. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. French:
Avis de conformit Cet appareil satisfait aux rglements de la FCC partie 15 du Code of Federal Regulations. Son fonctionnement est assujetti aux deux conditions suivantes :
1. Cet appareil ne doit pas causer dinterfrence prjudiciable et 2. lappareil doit accepter toute interfrence reue, y compris les interfrences qui peuvent causer un fonctionnement non dsir. Rglement de la FCC Cet quipement a t test et jug compatible avec les limites sappliquant aux appareils numriques de la classe B, conformment larticle 15 du rglement de la FCC. Ces limites ont t dfinies pour fournir une protection raisonnable contre les interfrences nuisibles dans le cadre dune installation rsidentielle. Cet quipement gnre, utilise et peut mettre de lnergie radiofrquence et, sil nest pas install ni utilis conformment aux instructions, peut causer des interfrences gnantes pour les communications radio. Rien ne garantit toutefois que des interfrences ne surviendront pas dans une installation particulire. Si cet quipement cause des interfrences nuisibles pour la rception de la radio ou de la tlvision, ce qui peut tre dtermin en mettant lquipement hors tension puis sous tension, lutilisateur devra essayer de corriger ces interfrences en effectuant une ou plusieurs des oprations suivantes :
Canada :
Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Dplacez lantenne de rception. Augmentez la distance entre lquipement et le rcepteur. Branchez lquipement une prise dun circuit autre que celui sur lequel le rcepteur est branch. Consultez le dtaillant ou un technicien de radiotlvision expriment. CAN ICES-3(B)/NMB-3(B) Dclaration dIC sur lexposition aux radiations:
Cet quipement est conforme aux limites dexposition aux radiations dfinies par le Canada pour des environnements non contrls. Cet metteur ne doit pas tre install au mme endroit ni utilis avec une autre antenne ou un autre metteur.