Always there to help you Register your product and get support at SW100M User manual www.philips.com/supportQuestion?Contact Philips Contents 1 Important Safety Notice 2 Your audio adapter Introduction What's in the box What else you need 3 Overview of the main unit 2 2 3 5 5 5 5 6 8 Product information Specifications 9 Troubleshooting 10 Appendix: Understand meanings of LED colors 21 21 22 23 4 Prepare 7 Download SpeakerSet Multiroom Manager to your iOS or Android device 7 7 Connect to your audio system Connect power and switch on 8 5 Connect SW100M to your home Wi-Fi network 9 Option 1: Set up through an iOS device 10 Option 2: Set up through an Android device Option 3: Set up wireless connection to a WPS router directly Option 4: Set up through a PC/Mac
(advanced) Rename speakers 13 13 12 11 6 Play Enjoy Spotify music services through SW100M Stream music to multiple speakers/
audio adapters at the same time 7 Other features Restore factory settings Update software 14 14 15 19 19 20 EN 1 1 Important Safety Know these safety symbols This 'bolt of lightning' indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The 'exclamation point' calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems. WARNING: To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert. Important Safety Instructions a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth. 2 EN g Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. i Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. j Only use attachments/accessories specified by the manufacturer. k Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. l Unplug this apparatus during lightning storms or when unused for long periods of time. m Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. n Apparatus shall not be exposed to dripping or splashing. o Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles). p Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Warning Never remove the casing of this apparatus. Never lubricate any part of this apparatus. Never place this apparatus on other electrical equipment. flames or heat. Keep this apparatus away from direct sunlight, naked Ensure that you always have easy access to the power cord, plug or adaptor to disconnect this apparatus from the power. Risk of overheating! Never install this apparatus in a confined space. Always leave a space of at least four inches around this apparatus for ventilation. Ensure curtains or other objects never cover the ventilation slots on this apparatus. Notice Any changes or modifications made to this device that are not expressly approved by WOOX Innovations may void the users authority to operate the equipment. Notice for the USA and Canada This device complies with Part 15 of the FCC Rules and RSS standard of Industry Canada. Operation is subject to the following two conditions:
1 this device may not cause harmful 2 this device must accept any interference received, including interference that may cause undesired operation. interference, and This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules and CAN ICES-3(B)/NMB-3(B) of Industry Canada. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Relocate the receiving antenna. Increase the separation between equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF Radiation Exposure Statement: This equipment complies with FCCs and ICs RF radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Installers must ensure that 20cm separation distance will be maintained between the device (excluding its handset) and users. EN 3 Trademark notice iPad, iPhone, iPod, iPod classic, iPod nano and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. Lightning is a trademark of Apple Inc. Android is a trademark of Google Inc. Use of this trademark is subject to Google permissions. Class II equipment symbol:
CLASS II apparatus with double insulation, and no protective earth provided. Note The type plate is located on the bottom of the apparatus. CAN ICES-3(B)/NMB-3(B). Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. Specifications are subject to change without notice. WOOX reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or visit www.recycle. philips.com. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. 4 EN 2 Your audio adapter Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here:
Model No. __________________________ Serial No. ___________________________ What else you need To stream Spotify music wirelessly to the audio adapter through Wi-Fi, you need:
a certified Wi-Fi router an iOS or Android device, such as an iPod touch/iPhone/iPad or an Android phone or tablet the SpeakerSet and Spotify (with a premium account) apps available on Apple App Store (for iOS devices) or Google Play Store (for Android devices) Your audio adapter should be connected to the same local network as your iOS or Android device through the Wi-Fi router. Introduction After connection of this audio adapter to your audio system, you can:
stream Spotify music wirelessly via Spotify Connect with your iOS or Android device as remote control listen to Spotify music everywhere at your home through group play
(multiple Spotify Multiroom speakers required) What's in the box Check and identify the contents of your package:
Audio adapter 1 x AC power adapter Printed materials EN 5 g OPTICAL OUT Connect the audio adapter to your audio system through an optical cable
(not supplied). h COAX OUT Connect the audio adapter to your audio system through a coaxial cable
(not supplied). i AUX OUT Connect the audio adapter to your audio system through RCA audio cables (red/white; not supplied). j DC IN Connect the power adapter. 3 Overview of the a b c main unit a /
Start or pause music play. j i h gf b d e c -/+
Adjust volume. d System status indicator adapter. e WPS button/indicator Skip to the previous/next song. Show the current status of the audio Enter WPS Setup mode for connection of the audio adapter to a Wi-Fi network. Show the Wi-Fi setup status in WPS mode. f SETUP button/indicator Enter App-Assisted Wi-Fi Setup mode for connection of the audio adapter to a Wi-Fi network. Show the Wi-Fi setup status. 6 EN 2 On the initial setup page, tap Setup a new speaker. Connect to your audio OUT L R R L system To enjoy music, first connect the audio adapter to your audio system in one of the following ways:
Option 1: Connect through AUX EN 7 4 Prepare Always follow the instructions in sequence. Download SpeakerSet Multiroom Manager to your iOS or Android device 1 (For iPod touch/iPhone/iPad users) Install SpeakerSet from Apple App Store, and then run the app. (For users of Android smartphones or tablets) then run the app. Install SpeakerSet from Google Play Store and Connect power and switch on Caution Risk of product damage! Make sure that the power supply voltage matches the voltage printed on the bottom of the audio adapter. Risk of electric shock! When you unplug the AC adapter, always pull the plug from the socket. Never pull the cord. Before you connect the AC adapter, make sure that you have completed all the other connections. As instructed on the app screen, connect the AC power adapter to the DC IN socket on the back of the audio adapter. the wall power socket. The audio adapter switches on automatically. The system status indicator on the front panel blinks amber during boot-
up. If a Wi-Fi connection has been set up for the audio adapter, the system status indicator turns solid green after successful connection. Tip The audio adapter enters standby mode automatically after 15 minutes of inactivity. Option 2: Connect through sockets. COAXIAL OUT Note OUT Note sockets. OPTICAL OUT Make sure that no cable is plugged in the AUX OUT Option 3: Connect through OPTICAL Make sure that no cable is plugged in the AUX OUT 8 EN Before connection of the audio adapter to your home Wi-Fi network, make sure that:
a your Wi-Fi router is powered on and working properly. b the audio adapter has been powered on and booted up successfully. c (for option 1, 2 and 4 only) you have jotted down the password of your home Wi-Fi router.
* If your Wi-Fi password contains such special characters as #/:/;/', you need to change your password. Once connected successfully, the audio adapter will remember your home Wi-Fi settings. Whenever the audio adapter is powered on, it is connected to your home Wi-Fi network automatically. 5 Connect SW100M to your home Wi-
Fi network To connect the audio adapter to your existing home Wi-Fi network, you need to apply your home Wi-Fi settings to the audio adapter in one of the following ways (depending on the type of your smart device and whether your Wi-Fi router is WPS enabled):
Setup method Choose option 1 (see 'Option 1: Set up through an iOS device'
on page 10). Choose option 2 (see 'Option 2: Set up through an Android device' on page 11). Choose option 3 (see 'Option 3: Set up wireless connection to a WPS router directly' on page 12). Choose option 4 (see 'Option 4: Set up through a PC/Mac
(advanced)' on page 13). Devices required for speaker setup iOS device
+ Wi-Fi router Android device
+ Wi-Fi router WPS Wi-Fi router PC/Mac with Wi-Fi enabled
+ Wi-Fi router EN 9 4 Select Wireless (Wi-Fi) under HOW DO YOU WANT TO CONNECT?. 5 As instructed, exit the app, and then select
:) Philips Setup from the list of available Wi-Fi networks. 6 After automatic detection of the audio adapter successfully, open the SpeakerSet app again. 7 Select the name of your home Wi-Fi network under Select a network to use speaker. 8 Enter the password of your home Wi-Fi network, and then tap Done to finish setup. 9 Wait until successful connection of the audio adapter to your home Wi-Fi network. The Wi-Fi status indicator on the SETUP button turns off. The system status indicator on the front panel turns solid green. Option 1: Set up through an iOS device 1 Before setup, make sure that your iOS device is connected to your home Wi-Fi network. 2 As instructed on the app, press and hold SETUP on the back of the audio adapter for more than 3 seconds. Both the system status indicator on the front panel and the Wi-Fi status indicator on the SETUP button turns solid amber. 3 Tap Next on the above app screen, and then read how to proceed with network setup. 10 EN Option 2: Set up through an Android device 1 Before setup, make sure that your Android device is connected to your home Wi-Fi network. 2 As instructed on the app, press and hold SETUP on the back of the audio adapter for more than 3 seconds. Both the system status indicator on the front panel and the Wi-Fi status indicator on the SETUP button turns solid amber. 3 Tap Next on the above app screen, and then read how to proceed with network setup. 4 Select Wireless (Wi-Fi) under HOW DO 5 Select the name of your home Wi-Fi YOU WANT TO CONNECT?. network under Select a network to use speaker. 6 Enter the password of your home Wi-Fi network, and then tap Done to finish setup. 7 Wait until successful connection of SETUP button turns off. front panel turns solid green. the audio adapter to your home Wi-Fi network. The Wi-Fi status indicator on the The system status indicator on the EN 11 WPS 2 Press the WPS button on your home Wi-Fi router. 3 Wait until successful connection of the The system status indicator on the button turns off. front panel turns solid green. speaker to your home Wi-Fi network. The Wi-Fi status indicator on the WPS Tip Only WPA and WPA2 are supported. If the wireless security is WEP or no security is applied, the WPS method does not work. For some Wi-Fi routers, you may need to hold the WPS button for Wi-Fi connection or enable the WPS PBC function from the router configuration pages. See the user manuals of the specific routers for details. Option 3: Set up wireless connection to a WPS router directly 1 As instructed on the app, press and hold WPS on the back of the audio adapter for more than 3 seconds. The Wi-Fi status indicator on the WPS button blinks green. WPS 12 EN Option 4: Set up through a PC/Mac (advanced) 1 Go to your Wi-Fi enabled PC/Mac. 2 Press and hold SETUP on the back of the audio adapter for more than 3 seconds. Both the system status indicator on the front panel and the Wi-Fi status indicator on the SETUP button turns solid amber. 3 Select :) Philips Setup from the list of browser on your PC/Mac. available Wi-Fi networks on your PC/Mac. 4 After successful connection, open a web 5 Enter http://philips.speakers or 172.24.0.1 at the address bar and click the Enter key. 6 Make changes on the setup page and confirm your settings. The Wi-Fi status indicator on the SETUP button turns off. The system status indicator on the front panel turns solid green. Rename speakers 1 After successful Wi-Fi setup, go to the home page and tap the speaker icon on the app screen. 2 Tap beside the speaker name. 3 Rename the speaker as you like. 4 Tap Done to confirm. EN 13 4 Select the audio adapter for music streaming. 5 Stream music from the Spotify app to the audio adapter. You can enjoy music through your audio system connected to the audio adapter. Philips SW100M xxxxxx 6 Play Enjoy Spotify music services through SW100M Note With Spotify, you can enjoy unlimited music on your new device. Thanks to the Spotify Connect feature, you can play and control all this music wirelessly. Choose music on your mobile or tablet, and hear it on your brand new device. 1 Switch to the Spotify app from SpeakerSet Make sure that the audio adapter is connected to your home Wi-Fi network with Internet connection available. or open the Spotify app directly. Username Password 2 Log in to your Spotify premium account. 3 Tap the Connect icon on the play screen. 14 EN During play, you can:
press on the audio adapter to pause/resume music play. press
/
on the audio adapter to skip to the previous/next song. press +/- on the audio adapter to adjust volume level. Tip settings. See the SpeakerSet app screen for more advanced You can take your iOS or Android device away from the network, or even switch it off. In this case, Spotify music will continue to play on your audio adapter. Stream music to multiple speakers/audio adapters at the same time You can add multiple Spotify Multiroom Speakers/audio adapters connected to the same Wi-Fi network into a group. Then, you can stream music from Spotify on your iOS or Android device in the same Wi-Fi network to all speakers/audio adapters in the group at the same time. In this way, you can enjoy music everywhere at your home. Group and ungroup speakers/audio adapters 1 Connect multiple Spotify Multiroom Speakers/audio adapters to your home Wi-Fi network (see 'Connect SW100M to your home Wi-Fi network' on page 9). 2 Run SpeakerSet on your iOS/Android smartphone or tablet. 3 On the home page, tap beside a speaker/audio adapter to act as the master speaker of a group. EN 15 7 Tap the check mark at the top right on the above app screen, and then wait for more than 10 seconds until the grouping finishes. To ungroup speakers:
1 Tap 2 Untick the box beside the speaker/audio adapter to be removed from the group. beside the master speaker. beside the group name to enter the 6 Edit the group name as you like on the edit edit page. 4 Tick circles beside the speakers/audio adapters to add them into the group. 5 Tap page. EN 16 Enjoy music streamed to the group speakers/audio adapters 1 On the home page, tap the icon of the master speaker on the SpeakerSet app screen. 2 Tap Go Spotify app to play music to switch to the Spotify app. 3 Log in to your Spotify premium account. 4 Tap the Connect icon to select the 5 Select and play your favorite music from the Spotify app. You can enjoy music streamed to all speakers/audio adapters in the same group at the same time. master speaker. on the main page to enter the volume To adjust volume of all speakers/audio adapters in a group at the same time:
1 Open the SpeakerSet app, then tap adjustment page. 2 Move the group volume slider to adjust the group at the same time. volume of all speakers/audio adapters in EN 17 synchronization page. 2 Tap Audio sync to enter the audio output is synchronized. 3 Adjust the audio delay time until the sound To adjust volume of an individual speaker/
audio adapter:
Press +/- on the top panel of the speaker/
audio adapter. Open the SpeakerSet app, then move the slider beside the speaker/audio adapter on the above volume adjustment page directly. To play/pause music play:
Press on the top panel of any speaker/
audio adapter in the group or use controls on the Spotify app screen directly. Tip On the volume adjustment page of the SpeakerSet app, beside a speaker/audio adapter to you can also tap mute/unmute its volume output. More music controls and sound settings are available on the SpeakerSet app screen, such as bass/treble adjustment. Adjust audio delay During group play, if the audio output from your audio system connected to the audio adapter is not synchronized with that from the other speakers in the group, you can adjust the delay time for the audio adapter to synchronize with the other speakers. 1 Open the SpeakerSet app, then tap the image of the audio adapter on the main page to see the available options. 18 EN 7 Other features Restore factory settings In some cases, you may need to reset the audio adapter, for example, when you need to reset the Wi-Fi settings or log out from the current Spotify premium account. 1 Make sure that the audio adapter is powered on and connected to the same Wi-Fi network as your smartphone or tablet. 2 Make sure that your home Wi-Fi network 3 Run SpeakerSet on your iOS or Android 4 Tap the image of the audio adapter to see smartphone or tablet. is connected to the Internet. the available options. 5 Tap Factory reset to enter the factory reset page. 6 Tap Yes to reset your audio adapter. If the above operation fails, you can reset the audio adapter in the following way:
1 Unplug the power cable. 2 Hold both the + and keys on the top panel and then plug in the power cable again. Tip The audio adapter reboots after factory reset. Your Spotify account will be logged out after factory reset. If the reset audio adapter is running in a group, it will be ungrouped. When the master speaker is reset, one of the other speakers in the group will serve as the master speaker instead. EN 19 5 Tap Software update to enter the software update page. 6 Tap Check online to see whether any new 7 If a new version is available, tap Update to start software update. The system status indicator on the front panel blinks amber and red alternately during this process. version of software is available. 8 Wait until the software update process finishes, then tap OK to reboot the audio adapter. Tip Depending on the network connection, it may take 10 minutes to finish update. Update software To improve product performance, Philips may offer you new software for you to update your audio adapter. Warning Always connect your audio adapter to AC power for firmware upgrade. Never power off your audio adapter nor close the app during firmware upgrade. 1 Make sure that audio adapter is powered on and connected to the same Wi-Fi network as your smartphone or tablet. 2 Make sure that your home Wi-Fi network 3 Run SpeakerSet on your iOS or Android 4 Tap the image of the audio adapter to see smartphone or tablet. is connected to the Internet. the available options. 20 EN General information AC power PHILIPS SWITCHING POWER SUPPLY Operation Power Consumption Power Consumption in Network Standby Dimensions
- Main Unit (L x W x H) Weight
- Main Unit Model:
S018KU0500200;
input: 100 - 240 V~, 50/60 Hz 500 mA; output: 5.0 V 2000 mA
< 10 W
< 2 W 179 x 105 x 66 mm 0.4 kg 8 Product information Note Product information is subject to change without prior notice. Specifications Audio output Output Voltage Signal to Noise Ratio Total Harmonic Distortion 1000 mV RMS
> 62 dBA
< 2%
Wireless Wireless standard Wireless security Frequency range WPS PBC (one button push) 802.11b/g/n WEP, 10 or 26 hex digit keys WPA (TKIP) or WPA2 (TKIP /
AES) with 8 - 40 ASCII printable characters passphrase 2412 - 2462 MHz (CH1-CH11)
(for /37, /55) 2412 - 2472 MHz (CH1-CH13)
(for /12, /10, /05, /79, /98) Yes EN 21 9 Troubleshooting Warning Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available. No power Make sure that the AC power plug of the audio adapter is connected properly. Make sure that there is power at the AC outlet. Check whether the audio adapter is in standby mode (see 'Connect power and switch on' on page 8). No sound Check whether the audio adapter is correctly connected to your audio system. Check whether your audio system is powered on. Check whether the audio adapter is muted or the streamed music is still buffering. The system status indicator blinks green when the audio adapter is muted or during music buffering. If the audio adapter is muted, adjust volume on the SpeakerSet app or on the audio adapter directly. Check the Wi-Fi network connection. Set up the network again if needed (see
'Connect SW100M to your home Wi-Fi network' on page 9). If there is no sound from a speaker in a group, check whether the speaker is out of range. You can check whether the wireless connection of the speaker is poor on the app screen directly. 22 EN No response from the speaker Restart the audio adapter, and then set up the Wi-Fi network for the audio adapter again (see 'Connect SW100M to your home Wi-Fi network' on page 9). Disconnect and reconnect the AC power plug to switch on the speaker again. If there is no sound from a speaker in a group, check whether the speaker is out of range. You can check whether the wireless connection of the speaker is poor on the app screen directly. How can I reconfigure the Wi-Fi settings?
Reset the speaker (see 'Restore factory settings' on page 19), and then configure the Wi-Fi settings again (see 'Connect SW100M to your home Wi-Fi network' on page 9). Occasional breaking of music streaming Do one or all of the following:
Move SW100M closer to your Wi-Fi router. Remove any obstacles between SW100M and your Wi-Fi router. Avoid using Wi-Fi channel which is overlapped by the nearby Wi-Fi network. Check if your network speed is fast enough
(in cases where multiple devices share the same router, the wireless performance may be affected). Turn off the other devices connected to your home router. Enable the Quality of Service (QoS) option (if available on the Wi-Fi router). Turn off other Wi-Fi routers. No response from the audio adapter Restart the audio adapter, and then set up the Wi-Fi network for the audio adapter again (see 'Connect SW100M to your home Wi-Fi network' on page 9). Disconnect and reconnect the AC power plug to switch on the audio adapter again. If there is no sound from a speaker in a group, check whether the speaker is out of range. You can check whether the wireless connection of the speaker is poor on the app screen directly. a 10 Appendix:
Understand meanings of LED colors a System status indicator (on the front b SETUP indicator (on the back panel) c WPS indicator (on the back panel) panel) c b LED colors LED behavior 1 1 1 2 No light 1 blinking amber slowly 1 blinking amber quickly 1 and 2 indicators in solid amber Status of the audio adapter Power off Booting up Connecting to a network In app-
assisted Wi-Fi setup mode 1 1 1 1 1 1 1 1 1 2 1 11 1 blinking amber quickly, and 3 blinking green 1 solid green 1 blinking green quickly 1 blinking green slowly 1 dimmed by 50% in solid green 1 solid red 1 blinking red 1 solid red, and 2 solid amber 1 blinking red and amber 1 blinking red, amber and green alternately In WPS mode Network connection successful During audio buffering Muted or playback paused In standby mode with network connection In standby mode without network connection Network connection failed During factory reset During firmware upgrade Firmware upgrade failed EN 23 P&F USA Inc. PO Box 2248 Alpharetta, GA 30023-2248 Phone 1 866 309 0845 Meet Philips at the Internet http://www.philips.com/welcome 2014 WOOX Innovations Limited. All rights reserved. This product was brought to the market by WOOX Innovations Limited or one of its affiliates, further referred to in this document as WOOX Innovations, and is the manufacturer of the product. P&F is the warrantor in relation to the product with which this booklet was packaged. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. SW100M_UM_37_EN