FCC ID: WXAQD60 Dual Frequency RFID Multi-ISO Protocol Modules

TM Dual Frequency RFID Multi-ISO Protocol Modules QD60 FEATURES

Supported Interface USB 2.0 Full Speed CCID Compliance Supports PC/SC Supported Protocols ISO14443A, all bit rates : up to 848 Kbps ISO15693, all modes Downlink 1 of 4 and 1 of 256 Uplink 6.6/13/26/53 kbps with 1 & 2 sub-

carrier Card Compatibilities 13.56MHZ NFC 1~4 TAGs ISO14443A / B ISO15693 ISO14443-4 T=CL 125KHZ EM compatible Ultra small outline 60x30x12 mm Information Support Visual C# demonstration Software Protocol Information

Low power, low profile for portable designed Plug-in fitting for 13.56Mhz Power supply Active 170mA @5VDC Firmware Update

Standard Configurations:

QD60---- USB Interface Specification is subject to change without notice. INTRODUCTION The QD60 is a OEM read/write module with antenna designed for simple integration. The typical reading range of the module is up to 20~40mm depending on the antenna and TAG. The QD60 is a RFID Module for 125KHz EM and all popular 13.56-MHz RFID/contactless standard protocols. The QD60 supports and compatibles with all major global secured baseband ISO standards including ISO14443 Type A, Type B, and Smartlabel ISO15693. The QD60 also support a plug-and-play USB device with CCID and PC/SC compliance, ensuring interoperability with different systems and applications. It is ideal for secure personal identity verification and online micro-payment transactions, including computer log-on, e-payment, home banking and network authentication. The QD60 is well suited for mobile devices due to its low power consumption and low operating voltage from 5V. The on-chip 3.3V regulators are provided to stabilize the chips power, and simultaneously supply the power to the external companion microcontroller up to 150 mA. The QD60 support the DLL and easy to control this module, The ActiveX Control can be using any terminal program (VB .NET , C#etc)

We welcome OEM inquiries

Custom device programming is available 169 31 8 TEL: +886-2-26954214 FAX: +886-2-26954213 e-mail: sales@gigatms.com.tw http://www.gigatms.com.tw 1 TM Dual Frequency RFID Multi-ISO Protocol Modules QD60 5V regulated for Operate Voltage . A linear regulator is recommended. Active 180mA @5VDC USB HID / USB CCID / USB Keyboard Interface ISO14443A, all bit rates : 106 kbps , 212 kbps , 424 kbps , 848 kbps ISO15693, all modes Downlink 1 of 4 and 1 of 256 Uplink 6.6/13/26/53 kbps with 1 & 2 sub-carrier 125KHZ EM compatible 13.56MHZ ISO 14443A MIFAREStandard, MIFARE 4k, MIFARE Ultralight, MIFARE Ultralight C,MIFARE DESFireR,MIFARE DESFire EV1, DESFire EV2, DESFire EV3 ISO 14443B Smartcard ISO14443B, SRI4K, SRI512 ISO 15693 SIC5600, ICODE-SLI, ICODE-SLI-L, ICODE-SLIS Read payware and paypass and E-passport ISO7816 T=CL NFC TAG 1~4 supportive ISO18092 Felica READ UID 125KHZ & 13.56MHz standard. Mifare : 1~3 cm ISO 15693 : 2~4 cm EM: 1~3 cm Read / Write 19200,N,8,1 60(L) x 30(W) x 12(H) mm 1.1g Operating Temp : -0 ~ +50 Humidity : 10 ~ 90 % relative SPECIFICATIONS:

POWER REQUIREMENT CURRENT REQUIREMENTS INTERFACE SUPPORTED PROTOCOLS CARD TYPE FERQUENCY READ RANGE TRANSPONDER BAUD RATE DIMENSIONS WEIGHT ENVIRONMENT PACKAGE DESCRIPTION

We welcome OEM inquiries

Custom device programming is available 169 31 8 2 TEL: +886-2-26954214 FAX: +886-2-26954213 e-mail: sales@gigatms.com.tw http://www.gigatms.com.tw TM Dual Frequency RFID Multi-ISO Protocol Modules QD60 PIN 1 Description Pin Numbers QD60-00 USB 8 Connector JST SH 1.0mm PIN#

1 2 3 4 5 6 7 8

+5 VDD D-

D+

GND SHIELD

We welcome OEM inquiries

Custom device programming is available 169 31 8 TEL: +886-2-26954214 FAX: +886-2-26954213 e-mail: sales@gigatms.com.tw http://www.gigatms.com.tw 3 Antennas installation INTEGRATIONINSTRUCTIONS 1. General:

Sections2through10describetheitemsthatmustbeprovidedintheintegrationinstructionsfor hostproductmanufacturers(e.g.,OEMinstructionmanual)tousewhenintegratingamoduleina hostproduct.ThisModulartransmitterapplicant(GIGATMS)shouldincludeinformationintheir instructionsforalltheseitemsindicatingclearlywhentheyarenotapplicable. 2. ListofApplicableFCCRules:

TheproductcomplieswiththefollowingFCCrules:

FCCPart15B(EMC):Electromagneticcompatibilityrequirements. FCCID:WXAQD60 FCCPart15.225:RFpowerrequirementsforinductiontypewirelesssystems usingthe13.56MHzfrequency. FCCPart15.209:RFpowerrequirementsforintentionalradiatorsoperatingin the125KHzfrequencyrange. 3. SummarizetheSpecificOperationalUseConditions:

This module needs to supply a regulated voltage from host device. TheQD60moduleisdesignedformountinginsidetheendproductbyourprofessional team.Therefore,itcomplieswiththeantennaandtransmissionsystemrequirementsof 15.203.FollowthespecificoperationaluseconditionsprovidedbyGIGATMSforthe properintegrationandusageofthemodule. 4. LimitedModuleProcedures:

To ensure proper operation, the QD60 module requires a regulated voltage supply from the host device. Typically, the host device should provide a power supply within the range of 5V, with 5V being the recommended voltage for this module. 5. TraceAntennaDesigns:

TheQD60modulecomeswithabuiltinantenna.Itisimportanttonotethatusing antennasfromotherbrandsormakingmodificationstotheantennaisnotallowed. FollowtheantennaintegrationguidelinesprovidedbyGIGATMStoensureproper performanceandFCCcompliance. 6. RFExposureConsiderations:

Thisproduct,beingalowpowerconsumptionconsumerwirelessdevice,followsFCC regulationsregardingRFexposure.Pleasenotethefollowingguidelines:

a. SpecificAbsorptionRate(SAR)Testing:

TheproducthasundergoneSARtestingtodeterminetheamountofRFenergy absorbedbythehumanbodyatvariousdistances. ThetestresultsensurethattheproductoperateswithinFCClimitstoprevent excessiveRFexposuretousers. b. RFExposureDistance:

TheproductisdesignedtocomplywithFCCregulationsregardingRFexposure limitsatasafedistancefromthehumanbody. Ensurethatusersmaintainadistanceofatleast20centimetersormorefrom theproduct'sradiatorduringinstallationandoperation. Warning:

ThisequipmentcomplieswithFCCradiationexposurelimitssetforthforanuncontrolled environment.ItalsocomplieswiththeFCC'sradiofrequency(RF)exposureguidelines.To ensurecompliance,theradiatorofthisequipmentshouldbeinstalledandoperatedwith aminimumdistanceofatleast20centimetersfromthehumanbody. 7. Antennas:

AntennaPort AntennamodelName AntennaType Properties Chain0 Chain1 PCBT2853A ANTT044 13.56MHz 125KHz L=3.4uH L=750uH SpecifythattheQD60moduleisequippedwithitsownantennaandemphasizethatusing otherbrandantennasormodifyingtheantennaisstrictlyprohibited. 8. LabelandComplianceInformation:

ContainsTransmitterModuleFCCID:WXAQD60orContainsFCCID:WXAQD60 IncludelabelingrequirementsandcomplianceinformationasspecifiedbyGIGATMS. EnsurethattheproductisappropriatelylabeledwiththenecessaryFCCinformationand compliancestatements. FCCCaution:

Anychangesormodificationsnotexpresslyapprovedbythepartyresponsiblefor compliancecouldvoidtheuser'sauthoritytooperatethisequipment. ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowing twoconditions:

(1) Thisdevicemaynotcauseharmfulinterference,and

(2) Thisdevicemustacceptanyinterferencereceived,includinginterferencethatmay causeundesiredoperation. ThemodulemustbeinstalledinRFIDMultiISOProtocolModules. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. 9. InformationonTestModesandAdditionalTestingRequirements:

Pleasechecktheinstallationmanualfirst. PleasecontactGIGATMS(www.gigatms.com.tw)ifyouhaveanyquestionswhen conductingtheRFcertificationtestonthehost. We(GIGATMS)arereadytopresentthecontrolmanualandothersfortheRFcertification test. 10. AdditionalTesting,Part15SubpartBDisclaimer:

FollowanyadditionaltestingproceduresandrequirementsspecifiedbyGIGATMSto ensurecompliancewithFCCPart15SubpartB.Includeadisclaimerstatingthatthe productcomplieswiththespecifiedrequirements. 11. NoteEMIConsiderations:

Note that a host manufacture is recommended to use KDB 996369 D04 Module Integration Guide recommending as "best practice" RF design engineering testing and evaluation in case non-linear interactions generate additional non-compliant limits due to module placement to host components or properties. For standalone mode, reference the guidance in D04 Module Integration Guide and for simultaneous mode7; see D02 Module Q&A Question 12, which permits the host manufacturer to confirm compliance. 12. HowtoMakeChanges:

Ifanychangesormodificationsneedtobemadetotheintegratedproduct,suchas addingoradjustingtheantennasorcable,followtheguidelinesprovidedbyGIGATMS. Ensurethatthechangescomplywiththeoriginalantennamodelspecifications. Forfurtherassistanceortosubmitreports/documentation,pleasecontactGIGATMSusingthe followinginformation:

Contact:GIGATMS Email:[InsertGIGATMScontactemail]

Applicant:GIGATMS Address:[InsertGIGATMSaddress]

Phone:[InsertGIGATMScontactnumber]

Note:Theintegrationinstructionsshouldbetailoredtoyourspecificproductandcompliance requirementsasguidedbyGIGATMS. TM Dual Frequency RFID Multi-ISO Protocol Modules QD60 LIMITED WARRANTY Giga-Tms warrants that the products sold pursuant to this Agreement will perform in accordance with Giga-Tmss published specifications. This warranty shall be provided only for a period of one year from the date of the shipment of the product from Giga-Tms (the Warranty Period). This warranty shall apply only to the Buyer (the original purchaser, unless that entity resells the product as authorized by Giga-Tms, in which event this warranty shall apply only to the first re-purchaser). During the Warranty Period, should this product fail to conform to Giga-Tmss specifications, Giga-Tms will, at its option, repair or replace this product at no additional charge except as set forth below. Repair parts and replacement products will be furnished on an exchange basis and will be either reconditioned or new. All replaced parts and products become the property of Giga-Tms. This limited warranty does not include service to repair damage to the product resulting from accident, disaster, unreasonable use, misuse, abuse, negligence, or modification of the product not authorized by Giga-Tms. Giga-Tms reserves the right to examine the alleged defective goods to determine whether the warranty is applicable. Without limiting the generality of the foregoing, Giga-Tms specifically disclaims any liability or warranty for goods resold in other than Giga-Tmss original packages, and for goods modified, altered, or treated without authorization by Giga-Tms. Service may be obtained by delivering the product during the warranty period to Giga-Tms (8F No. 31 Lane 169, Kang Ning Street, Hsi Chih Dist New Taipei City, Taiwan). If this product is delivered by mail or by an equivalent shipping carrier, the customer agrees to insure the product or assume the risk of loss or damage in transit, to prepay shipping charges to the warranty service location, and to use the original shipping container or equivalent. Giga-Tms will return the product, prepaid, via a three (3) day shipping service. A Return Material Authorization (RMA) number must accompany all returns. Buyers may obtain an RMA number by contacting with sales@gigatms.com.tw EACH BUYER UNDERSTANDS THAT THIS GIGA-TMS PRODUCT IS OFFERED AS IS. GIGA-TMS MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, AND GIGA-TMS DISCLAIMS ANY WARRANTY OF ANY OTHER KIND,INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IF THIS PRODUCT DOES NOT CONFORM TO GIGA-TMSS SPECIFICATIONS, THE SOLE REMEDY SHALL BE REPAIR OR REPLACEMENT AS PROVIDED ABOVE. GIGA-TMSS LIABILITY, IF ANY, SHALL IN NO EVENT EXCEED THE TOTAL AMOUNT PAID TO GIGA-TMS UNDER THIS AGREEMENT. IN NO EVENT WILL GIGA-

TMS BE LIABLE TO THE BUYER FOR ANY DAMAGES,INCLUDING ANY LOST PROFITS, LOST SAVINGS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF, OR INABILITY TO USE, SUCH PRODUCT, EVEN IF GIGA-TMS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY. LIMITATION ON LIABILITY EXCEPT AS PROVIDED IN THE SECTIONS RELATING TO GIGA-TMSS LIMITED WARRANTY, GIGA-TMSS LIABILITY UNDER THIS AGREEMENT IS LIMITED TO THE CONTRACT PRICE OF THIS PRODUCT. GIGA-TMS MAKES NO OTHER WARRANTIES WITH RESPECT TO THE PRODUCT, EXPRESSED OR IMPLIED, EXCEPT AS MAY BE STATED IN THIS AGREEMENT, AND GIGA-TMS DISCLAIMS ANY IMPLIED WARRANTY, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. GIGA-TMS SHALL NOT BE LIABLE FOR CONTINGENT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES TO PERSONS OR PROPERTY. GIGA-TMS FURTHER LIMITS ITS LIABILITY OF ANY KIND WITH RESPECT TO THE PRODUCT, INCLUDING ANY NEGLIGENCE ON ITS PART, TO THE CONTRACT PRICE FOR THE GOODS. GIGA-TMSS SOLE LIABILITY AND BUYERS EXCLUSIVE REMEDIES ARE STATED IN THIS SECTION AND IN THE SECTION RELATING TO GIGA-TMSS LIMITED WARRANTY.

We welcome OEM inquiries

Custom device programming is available 169 31 8 TEL: +886-2-26954214 FAX: +886-2-26954213 e-mail: sales@gigatms.com.tw http://www.gigatms.com.tw 5 FederalCommunicationCommissionInterferenceStatement ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigital device,pursuanttoPart15oftheFCCRules.Theselimitsare designedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidential installation.Thisequipmentgenerates,usesandcanradiateradio frequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,may causeharmfulinterferencetoradiocommunications.However, thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthis equipmentdoescauseharmfulinterferencetoradioortelevision reception,whichcanbedeterminedbyturningtheequipmentoffandon,theuseris encouragedtotrytocorrecttheinterferencebyoneofthefollowing measures:

Reorientorrelocatethereceivingantenna. Increasetheseparationbetweentheequipmentandreceiver. Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiveris connected. Consultthedealeroranexperiencedradio/TVtechnicianforhelp. FCCCaution:

Anychangesormodificationsnotexpresslyapprovedbythepartyresponsiblefor compliancecouldvoidtheuser'sauthoritytooperatethisequipment. ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwo conditions:

(1)Thisdevicemaynotcauseharmfulinterference,and

(2)Thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycause undesiredoperation. ThemodulemustbeinstalledinRFIDMultiISOProtocolModules. IMPORTANTNOTE:

Intheeventthattheseconditionscannotbemet(forexamplecertainlaptopconfigurations orcolocationwithanothertransmitter),thentheFCC authorizationisnolongerconsideredvalidandtheFCCIDcannotbeusedonthefinal product.Inthesecircumstances,theOEMintegratorwillbe responsibleforreevaluatingtheendproduct(includingthetransmitter)andobtaininga separateFCCauthorization. EndProductLabeling Thefinalendproductmustbelabeledinavisibleareawiththe following:"ContainsFCCID:WXAQD60 ManualInformationtotheEndUser TheOEMintegratorhastobeawarenottoprovideinformationtotheenduserregarding howtoinstallorremovethisRFmoduleintheuser'smanualofthe endproductwhichintegratesthismodule.

FCC ID: WXAQD60 The FCC ID Label will be placed on the equipment as shown in the photograph below.

Covered list attestation FCC application letter Kiwa Page 1 of 2 RF_755_02 15-02-2023

. GIGA-TMS INC. Quality, Delivery & Service Certification Application Attestation Statements GIGA-TMS INC. 8F, NO.31, LANE 169, KANG-NING ST.,HSI-CHIH, 22180 NEW TAIPEI CITY, Taiwan Subject: FCC ID: WXAQD60 To Whom It May Concern:

Statement for 47 CFR section 2.911(d)(5)(i) GIGA-TMS INC. certifies that as of the date of the application the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not covered equipment. Additional Explanation: <N/A>

Statement for 47 CFR section 2.911(d)(5)(ii) GIGA-TMS INC. (the applicant) certifies that, as of the date of the filing of this application, the applicant 0 - is / - is not ) identified on the Covered List as an entity producing covered equipment. pate +

City: | NEW TAIPEI CITY Name : M.T. WANG Function: General Manager Telephone number: 02 2695-4214 Email address: mtwang@gigatms.com.tw Signature: Jal. 7 WANG ajp- 07}

_|__ 1_ The Commissions Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commissions website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes covered equipment. https:/www.fcc.gov/supplychain/coverediist .

(2): For FCC it must be the Grantee Code owner or the authorized agent.

(3): double click on the appropriate box and select checked then OK Covered list attestation FCC application letter Kiwa Page 2 of 2 RF _755_02 15-02-2023 GIGA-TMS INC. Quality, Delivery & Service Revision Record Sheet:

Revision | Section | Page Date Remark(s) | issued by number mer

4 07-02-2023 4 1 version | Rv tea |

1 i 5-02-2023 Changed Applicant to Company | RvdM and added Subject: FCC ID:

Issued/modified by Function Revision Date Verified by Function Date Released by Function Date of release:

: Richard van de Meer

: Certification assessor

:02

: 15-02-2023

: Willem Jan Jong

: Team Lead

> -02-2023

: Axel Gase

: Manager Quality Assurance

:__ -02-2023

Date of issue 02-01-2023 RF_160_05 Declaration of Authorisation lef Wi Fa 2

* GIGA-TMS INC. Quality, Delivery & Service Declaration of Authorization We Name: GIGA-TMS INC. Address: 8F, NO.31, LANE 169, KANG-NING ST.,HSI-CHIH, City: NEW TAIPEI CITY, Country: Taiwan Declare that:

Name Representative of agent: Gary Wu") Agent Company name: Wendell Industrial Co., Ltd. Address: 1F, No. 119, Wugong 3rd Rd., Wugu Dist. City: New Taipei City Country Taiwan R.O.C. is authorized to apply for Certification of the following product(s):

Product description: Dual Frequency RFID Multi-ISO Protocol Modules Type designation: QD60 Trademark: ermeoreenees PROMAG nics ssn eh 88 Validity/ expiry date on our behalf. Dates TTT a City: NEW TAIPEI CITY, Name: M.T. WANG Function: General Manager Signature: LALIT MAM 6]

Notes:

(1): Required for FCC application

(2): For FCC it must be the Grantee Code owner or the authorized agent. Revision Record Sheet:

Revision | Section Page number Date Remark(s) issued by number 02 1 02-01-2023 _| History sheet added | AG Issued/modified by : Axel Gase Function : Quality Manager Revision : 02 Date : 02-01-2023 Verified by : Willem Jan Jong Function : Team Lead Date : 02-01-2023 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : 02-01-2023

The module is a limited module. Any company of the host device which install this modular with limit modular approval should perform the test of radiated emission and spurious emission according to FCC part 15C:

15.225 and 15.209 requirement Various factors should be avoided as far as possible to the wireless signal transmission and reception. Pay attention to the following What time is it:

1 Avoid using metal for the product shell surrounding the RFID 13.56MHz & 125K . When using a part of the metal shell, try to keep the antenna part of the module away from the metal part. The metal connecting wire or metal screw inside the product should be as far away as possible from the antenna part of the module. 2The antenna part of the module should be placed against the edge of the carrier board PCB or directly exposed to the carrier board, and it is not allowed to be placed in the middle of the board, There is at least 5mm of free space in the antenna direction, and the carrier board under the antenna is milled out. Copper and wiring are not allowed in the di recti on parallel to the antenna. 3 It is recommended to use insulating material to isolate the module mounting position on the substrate, for example, put a whole piece of sikscreen at this position (Top Over Lay)

GIGA-TMS INC. 8F, NO.31, LANE 169, KANG-NING ST.,HSI-CHIH, NEW TAIPEI CITY, 22180 TAIWAN Date: 3/17/2023 FCC ID: WXAQD60 Federal Communications Commission Contact person: MT Wang Authorization and Evaluation Division E-mail: mtwang@gigatms.com.tw Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Limited Module Approval. To whom may it concern:

We have the following attestation to the eight requirements described by FCC public notice DA00-1407 "Part 15 Unlicensed Modular Transmitter Approval". 1. RF shielding. The model QD60(FCC ID: WXAQD60), does not have its own RF shielding. 2. Excessive data rates or over modulation. The module circuit buffers all modulation and control of the transmitter. The control of the transmitter is via data commands and software instructions contained within the module. The transmitter is tested with the module operated at the maximum power. Data commands are reduced the power of transmitter but do not influence the modulation contents. 3. Power supply regulation. The module has its own power supply regulator to insure compliance with part 15 requirements regardless of the quality or level of external DC supplying the module from the end product. The regulator operates within the 5Vdc. 4. Antenna and unique coupler requirements to antenna connector. The antenna is an integral type and there is no antenna connector for end product.

(1) No modification of antenna will be allowed. GIGA-TMS INC. 8F, NO.31, LANE 169, KANG-NING ST.,HSI-CHIH, NEW TAIPEI CITY, 22180 TAIWAN

(2) The end product must be certified by FCC, if customer will use the other antenna. 5. Stand--alone configuration. The modular transmitter has been performed the testing as a stand alone and then confirmed the compliance. Please refer to the test report number W6M21608-16163-C-1. 6. Label with own FCC ID number and exterior label. The module is labeled with own FCC ID number. Please see exhibition label sample for the FCC ID of this module. The label made by polyester sheet is affixed to the module by a high-strength adhesive. Since the FCC ID number will not be visible when the module is installed inside the end product, there are instructions give to the OEM how to label the end product. Please refer to the User Manual. 7. Compliant with any specific rule or operating requirements. The module as manufactured is completely controlled by the onboard processor. There are no influences to the operation of the transmitter the end can induce that will operate the module outside of scope of the regulations. The necessary explanation for user to be complied with this requirement is contained on the manual. 8. RF exposure requirements. To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Sincerely yours, Signature: Vii 7. Ww. A) M. G]

Agent letter FCC attestation statement Kiwa Page 1 of 2 RF_753, Issue 2 45-02-2023

% GIGA-TMS INC. V2 Quality, Delivery & Service U.S. Agent Designation for Service of Process

(Applicant and U.S. Agent are Separate Parties) TO:

Kiwa Nederland B.V. Wilmersdorf 50 7327 AC Apeldoorn Postbus 137 7300 AC Apeldoom Netherlands ATTENTION: FCC Certification Section 2.911(d)(7) Information Signature:

Date:

This letter is to confirm that we (the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-

related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name:

Grantee Code:

Contact person name:

Street address:

ZIP/City/State Telephone number:

Email address:

Signature:

Date:

GIGA-TMS ING. WXA M.T. WANG 8F, NO.31, LANE 169, KANG-NING ST.,HSI-

CHIH, . 22180/ NEW TAIPEI CITY, 02 2695-4214 mtwang@gigatms.com.tw Agent letter FCC attestation statement Kiwa Page 2 of 2 15-02-2023 RF_753, Issue 2 os -GIGA-TMS INC. 4) Quality, Delivery & Service Revision Record Sheet:

Revision | Section Page number | Date Remark(s) issued by number 17-02-2023 | 1 version Added FRN to Agent details Issued/modified by : Richard van der Meer Function : Certification assessor Revision 02 Date : 15-02-2023 Verified by : Willem Jan Jong Function Team Lead Date : __-02-2023 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : __-02-2023

FCC, Request for non-disclosure Date: 02-01-2022 RF_501, Issue 10 Company Name: GIGA-TMS INC. Address: 8F, NO.31, LANE 169, KANG-NING ST.,HSI-CHIH, City: NEW TAIPEI CITY, Country: Taiwan To: Kiwa Netherlands B.V., Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Request for confidentiality FCC ID: WXAQD60 Reference number: #44##

Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:

L] Bill(s) of Material XX] Block Diagrams XX] Operational Description [x] Schematic Diagrams [_] Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below):

[] Internal Photos [_] Users Manual ] Test Set-up Photos [1 External Photos MUSTTICALIONS q.cacucunacecasnoavussoneeeeveseoceseee eweeevenenencnennenecanensennnenernennennennnnnannndndistiviiiveeiektiteubae cone uMaewanioninn Date: 6 }>0 33 Name and signature of applicant: Vi a / WA AN l . Notes:

1) A document or type of document can only have ONE type of confidentiality!

2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!

The planned date should state in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!

5) Request for extension or for release must be received by Kiwa NL B.V. at least 7 days before date of actual marketing or before expiration of the STC period FCC, Request for non-disclosure Date: 02-01-2023 RF_501, Issue 10 Page 1 of 1 Revision Record Sheet:

Revision | Section Page number Date Remark(s) | issue? by number 02-01-2023 History sheet added [AG |

Issued/modified by : Axel Gase Function : Quality Manager Revision :10 Date : 02-01-2023 Verified by : Willem Jan Jong Function : Team Lead Date : 02-01-2023 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : 02-01-2023