all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 1.04 MiB | July 31 2023 | |||
1 |
|
Internal Photos | Internal Photos | 2.09 MiB | July 31 2023 | |||
1 |
|
External Photos | External Photos | 2.52 MiB | July 31 2023 | |||
1 |
|
ID Label and Location | ID Label/Location Info | 1.47 MiB | July 31 2023 | |||
1 |
|
Agent Designation Attestation | Attestation Statements | 192.74 KiB | July 31 2023 | |||
1 | Block Diagram | Block Diagram | July 31 2023 | confidential | ||||
1 |
|
Confidentiality Request Letter | Cover Letter(s) | 144.12 KiB | July 31 2023 | |||
1 |
|
Covered List Attestation Letter | Attestation Statements | 139.32 KiB | July 31 2023 | |||
1 | Operational Description | Operational Description | July 31 2023 | confidential | ||||
1 |
|
Power of Attorney Letter | Cover Letter(s) | 135.39 KiB | July 31 2023 | |||
1 |
|
RF Exposure Report | RF Exposure Info | 1.94 MiB | July 31 2023 | |||
1 | Schematics | Schematics | July 31 2023 | confidential | ||||
1 |
|
Test Report DXX | Test Report | 731.57 KiB | July 31 2023 | |||
1 |
|
Test Setup Photos | Test Setup Photos | 429.55 KiB | July 31 2023 |
1 | User Manual | Users Manual | 1.04 MiB | July 31 2023 |
DF700A-00/DF710A-00/
DF710A-U2(ACC-D5280) User Manual Published: 2023/6/26 Version 1.0 TM970246 PROMAG GIGA-TMS INC. FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help. CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. RF exposure warning The device has been evaluated to meet general RF exposure requirement. Canada, Industry Canada (IC) Notices This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Canada, avis d'Industry Canada (IC) Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Radio Frequency (RF) Exposure Information The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This device has also been evaluated and shown compliant with the IC RF Exposure limits under mobile exposure conditions. Content Informations concernant l'exposition aux frquences radio (RF) La puissance de sortie mise par lappareil de sans fil est infrieure la limite d'exposition aux frquences radio d'Industry Canada (IC). Utilisez lappareil de sans fil de faon minimiser les contacts humains lors du fonctionnement normal. Ce priphrique a galement t valu et dmontr conforme aux limites d'exposition aux RF d'IC dans des conditions d'exposition des appareils mobiles. DEMOSTRATION SOFTWARE LICENSE Please read this agreement carefully before you start to install this demonstration software. If you do not agree please stop the installation of the software. Software developed by GITA-TMS INC is provided AS IS without warranty of any kind, either express or implied, including, but not limited to, the implied warranties of fitness for a purpose, or the warranty of non-infringement. Without limiting the forgoing GIGA-TMS INC makes no warranty that:
The software will meet you requirements. The software will be uninterrupted, timely, secure or error-free. The results that may be obtained from the use of the software will be effective, accurate or reliable. The quality of the software will meet your expectations. Any errors in the software obtained from GIGA-TMS INC will be corrected. The software and its documentation made available for test or demo purpose could include technical or other errors, GIGA-TMS INC may make changes to the software or documentation made available to shipped with the conjunction products may be out of date, and GIGA-TMS INC makes no responsibility to update such materials In no event shall GIGA-TMS INC be liable to you or any third party for any special incidental, indirect or consequential damages of any kind, or any damages whatsoever, including, without limitation, those resulting from loss of use, data or profits, whether or not GIGA-TMS INC has been advised of the possibility of damage, and on any theory of liability, arising out of or in connection with the use of the software. The installation of the software is done at your own consideration and risk and with agreement that you will be solely responsibility for any damage to your system or loss of data that results from such activities. DF700A User Manual V1.0 3 GIGA-TMS warrants that the products sold pursuant to this Agreement will perform in accordance with GIGA-TMSs published specifications. This warranty shall be provided only for a period of one year from the date of the shipment of the product from GIGA-TMS (the Warranty Period). This warranty shall apply only to the Buyer (the original purchaser, unless that entity resells the product as authorized by GIGA-TMS, in which event this warranty shall apply only to the first re-purchaser). LIMITED WARRANTY During the Warranty Period, should this product fail to conform to GIGA-TMSs specifications, GIGA-TMS will, at its option, repair or replace this product at no additional charge except as set forth below. Repair parts and replacement products will be furnished on an exchange basis and will be either reconditioned or new. All replaced parts and products become the property of GIGA-TMS. This limited warranty does not include service to repair damage to the product resulting from accident, disaster, unreasonable use, misuse, abuse, negligence, or modification of the product not authorized by GIGA-TMS. GIGA-TMS reserves the right to examine the alleged defective goods to determine whether the warranty is applicable. Without limiting the generality of the foregoing, GIGA-TMS specifically disclaims any liability or warranty for goods resold in other than GIGA-TMSs original packages, and for goods modified, altered, or treated without authorization by GIGA-TMS. Service may be obtained by delivering the product during the warranty period to GIGA-TMS (8F No. 31 Lane 169, Kang Ning Street, Hsi Chih Dist New Taipei City, Taiwan). If this product is delivered by mail or by an equivalent shipping carrier, the customer agrees to insure the product or assume the risk of loss or damage in transit, to prepay shipping charges to the warranty service location, and to use the original shipping container or equivalent. GIGA-TMS will return the product, prepaid, via a three (3) day shipping service. A Return Material Authorization (RMA) number must accompany all returns. Buyers may obtain an RMA number by contacting Technical Support at +886-2-26954214. EACH BUYER UNDERSTANDS THAT THIS GIGA-TMS PRODUCT IS OFFERED AS IS. GIGA-TMS MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, AND GIGA-TMS DISCLAIMS ANY WARRANTY OF ANY OTHER KIND, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IF THIS PRODUCT DOES NOT CONFORM TO GIGA-TMSS SPECIFICATIONS, THE SOLE REMEDY SHALL BE REPAIR OR REPLACEMENT AS PROVIDED ABOVE. GIGA-TMSS LIABILITY, IF ANY, SHALL IN NO EVENT EXCEED THE TOTAL AMOUNT PAID TO GIGA-TMS UNDER THIS AGREEMENT. IN NO EVENT WILL GIGA-TMS BE LIABLE TO THE BUYER FOR ANY DAMAGES, INCLUDING ANY LOST PROFITS, LOST SAVINGS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF, OR INABILITY TO USE, SUCH PRODUCT, EVEN IF GIGA-TMS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY. LIMITATION ON LIABILITY EXCEPT AS PROVIDED IN THE SECTIONS RELATING TO GIGA-TMSS LIMITED WARRANTY, GIGA-TMSS LIABILITY UNDER THIS AGREEMENT IS LIMITED TO THE CONTRACT PRICE OF THIS PRODUCT. GIGA-TMS MAKES NO OTHER WARRANTIES WITH RESPECT TO THE PRODUCT, EXPRESSED OR IMPLIED, EXCEPT AS MAY BE STATED IN THIS AGREEMENT, AND GIGA-TMS DISCLAIMS ANY IMPLIED WARRANTY, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. GIGA-TMS SHALL NOT BE LIABLE FOR CONTINGENT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES TO PERSONS OR PROPERTY. GIGA-TMS FURTHER LIMITS ITS LIABILITY OF ANY KIND WITH RESPECT TO THE PRODUCT, INCLUDING ANY NEGLIGENCE ON ITS PART, TO THE CONTRACT PRICE FOR THE GOODS. GIGA-TMSS SOLE LIABILITY AND BUYERS EXCLUSIVE REMEDIES ARE STATED IN THIS SECTION AND IN THE SECTION RELATING TO GIGA-TMSS LIMITED WARRANTY. Content Content CONTENT .................................................................................................................................................................................... 5 INTRODUCTION .......................................................................................................................................................................... 7 GENERAL ........................................................................................................................................................................................... 7 APPLICATION DIRECTORY (MAD) SUPPORT ............................................................................................................................... 8 MIFARE HARDWARE FEATURES ................................................................................................................................................................ 9 WIRE ASSIGNMENT ............................................................................................................................................................................. 9 DF700A-00/DF710A-00 .............................................................................................................................................................. 9 DF710A-U2 .............................................................................................................................................................................. 10 PART NUMBERS ................................................................................................................................................................................ 11 SPECIFICATION .................................................................................................................................................................................. 11 DEVICE OPERATION .................................................................................................................................................................. 13 PREPARATION ................................................................................................................................................................................... 13 SETTING UP READER USING MIFARE/DESFIRE READER UTILITY ............................................................................................................... 15 Connect to Reader ................................................................................................................................................................... 15 Mifare Settings ........................................................................................................................................................................ 16 DESFire Settings ....................................................................................................................................................................... 17 Reader Settings ........................................................................................................................................................................ 18 LED/Buzzer Settings ................................................................................................................................................................. 19 Wiegand Settings .................................................................................................................................................................... 22 ABA-TK2 Settings ..................................................................................................................................................................... 23 RS232/485 Settings ................................................................................................................................................................. 24 Configured Card Settings ......................................................................................................................................................... 26 MAKE A CONFIGURED CARD ................................................................................................................................................................ 27 DATA OUTPUT .................................................................................................................................................................................. 30 Reader Test .............................................................................................................................................................................. 30 Test Read Card After Updating ................................................................................................................................................ 31 Test Key Pad After Updating .................................................................................................................................................... 31 TECHNICAL SUPPORT ................................................................................................................................................................ 35 APPENDIX ................................................................................................................................................................................. 36 WIEGAND INTERFACE ......................................................................................................................................................................... 36 ABA-TK2 INTERFACE ......................................................................................................................................................................... 38 RS232 INTERFACE ............................................................................................................................................................................. 40 DF700A User Manual V1.0 5 EXTERNAL LED/BUZZER CONTROL ....................................................................................................................................................... 42 CAUTION .................................................................................................................................................................................. 43 UPDATE HISTORY ...................................................................................................................................................................... 44 Content DF700A User Manual V1.0 6 Introduction Introduction General DESFire Reader is a user configurable MIFARE sector data reader. It can be configured to read MIFARE card with MAD1/MAD2/MAD3 standard in a MIFARE application open system, or can be configured to read the user-defined sector data (Non-MAD) in a user defined closed system. Output interface can be configured as an RS232 output or Wiegand output. Wiegand output is selectable up to 128 bits. DESFire Reader can also be set with a Reader ID number for multi-unit communication. Features:
1. Supports MAD1/MAD2/MAD3 standard, and supports customer MAD-AID setting. 2. Supports Non-MAD format with user-defined sector number. 3. Supports used card with data offset and length. 4. Supports multi sectors. 5. Reads Mifare Classic 1K/4K, or DESFire 2K/4K/8K card. 6. Sets each reader with reader ID for multi-link application. 7. Output interface: Wiegand (Default), ABA-TK2 and RS232/RS485. 8. Wiegand output selectable from 1 bit to 128 bits. 9. RS232 output packet can be set with header, reader ID and trailer. 10. Serves as a versatile configurable reader bundled with a utility developed by Promag engineering teams which is easy to set up for buzzer or LED color indication. 11. Protected by mutual three passes authentication, DES & 3 DES MACing/Encipherment. 12. Classic housing and various models offer customers wide coverage to select for their application demand. The inside buzzer and LED are able to be configured by the bundled utility. Application:
1. Access Control. 2. Time Attendance. 3. Guest Registration System. 4. Academic Services. 5. Info Services. 6. Identity authentication. DF700A User Manual V1.0 7 Introduction MIFARE Application Directory (MAD) Support DF7XXA supports the MAD format card, the MAD (MIFARE application directory) standard proposes the introduction of common data structures for card application directory entries. DF7XXA should take advantage of this feature using those sector pointers instead of physical sector number. Auto Mode Request Anti-
collision DF7XXA reader will search the AID from Mifare application directory (MAD), and then get a correctly sector number from MAD. If the card is not a MAD No Tag card, the DF7XXA will use the Non-MAD Sector#
(setting by Mifare/DESFire Reader Utility). About MAD please visit the web sites:
http://www.nxp.com/
http://www.mifare.net/
Card On Reader Is MAD Card AID Match Yes Yes No No Get Using DF7XX Application Sector#
Non-MAD Sector#
APP KEY Authenticat e NG PASS Read Sector Data Unknown Output Data DF700A User Manual V1.0 8 Hardware Features Hardware Features Wire Assignment DF700A-00/DF710A-00 Color Red Black White Green Symbol I/O Description VCC GND DATA 1 DATA 0 IN IN Power Input : DC 9V~24V Power Ground OUT Wiegand Data 1 Signal / ABA-TK2 Clock (Strobe) OUT Wiegand Data 0 Signal / ABA-TK2 Data Yellow TXD OUT DF700A-00: RS232 TXD (To Host RXD) DF710A-00:RS485+
Blue RXD IN DF700A-00: RS232 RXD (To Host TXD) Orange CP Brown LED/BUZZER IN IN DF710A-00: RS485-
ABA TK2 Card Present External LED/BUZZER Control DF700A User Manual V1.0 9 Hardware Features DF710A-U2 Color Red Black White Green Yellow Blue Orange Brown Purple Gray Symbol I/O Description VCC GND DATA 1 DATA 0 TXD RXD DI1 DI2 DO1 DO2 IN IN Power Input : DC 9V~24V Power Ground OUT Wiegand Data 1 Signal OUT Wiegand Data 0 Signal OUT RS485+
IN IN IN RS485-
Digital Input 1 (Door Sensor) Digital Input 2 (Exit Button) OUT Digital Output 1 OUT Digital Output 2 DF700A User Manual V1.0 10 Hardware Features Part Numbers Device numbering scheme is as follows:
DF75 0A - 00 00: Standard U2: Fermax Reader 0: RS232 interface 1: RS485 interface Examples of valid part numbers:
Part Number Description DF700A-00 DF710A-00 DF700A reader with RS232 communication interface. DF710A reader with RS485 communication interface. Specification Features Card Type Security Read Range Interface Model DF700A DF710A MIFARE Classic (1K/4K for MAD1/MAD2), MIFARE DESFire (2K/4K/8K for MAD3) DES & 3DES MACing / Encipherment 3 cm Weigand, ABA-TK2, RS232 Weigand, ABA-TK2, RS485 Status Indicator 2 LEDs Buzzer Waterproof Communication 1 Yes RS232/RS485 speed 19,200 bit/s Electrical Voltage DC 9V~24V DF700A User Manual V1.0 11 Hardware Features RF Frequency 13.56 MHz Environment Operating Temperature 0C ~ +50C Storage Temperature
-10C ~ +60C Humidity Dimensions Width Height Depth 10 ~ 90 relative 46.5 mm 82.5 mm 25.0 mm DF700A User Manual V1.0 12 Device Operation Device Operation Preparation To configure DF7XXA, you need to connect the reader to the reader-kit first below (refer to wire assignment):
DF700A Above housing is for reference only. DF710A Reader-Kit MF700KIT ORANGE BLACK WHITE RED YELLOW BLUE GREEN BROWN CP GND D1 D0 RX TX VCC WAS-T0029
9VDC The following is the example of using USB485A-00 with DF710A. Connect the readers yellow wire (T+) and blue wire (T-) to RS485 converter. Connect RS485 converter to PC. (Using Promag USB485A-00 is recommended.) DF700A User Manual V1.0 13 Device Operation Note: Reader-kit and USB485A-00 are connection tool kit. They are optional items for purchasing. DF700A User Manual V1.0 14 Device Operation Setting up Reader Using Mifare/DESFire Reader Utility Install Mifare/DESFire Reader Utility software in your PC and connect the reader to PC. Please check the connection of PC-to-reader is correctly. Note: Download the Mifare/DESFire Reader Utility setup file from the link:
http://ftp.gigatms.com.tw/disks/disk5238/. Connect to Reader On Connections menu, click the port name where reader connects. DF700A User Manual V1.0 15 Mifare Settings Device Operation MAD-AID (default=4703) MAD Application Identifier number is authorized and assigned by Mifare.net for registered Application Identifier in a Mifare application open system (AID:0000h~FFFFh).Or it is also upon the customers request possible for the user to define the AID himself for the application in user defined closed system without registering into MAD group. According to the AID, DF7XXA can find and read the corresponding sector on the MAD card. App Key (KEY_A) (default=FFFFFFFFFFFF) App Key must be the same as the KEY_A of the card issued. This means DF7XX only can read the sector data on the card with the same KEY_A. Encrypt (default=None) Fraud prevention, Select Encrypt Mode (None, Encrypt 1, Encrypt 2, Encrypt 3, Encrypt 4, Encrypt 5) to protect your card data. (Remark: Encrypt mode must work together with the same encrypt mode of
"Mifare Card Issuer" software.) Used Card (Not issued by PROMAG Card Issuer) You have to indicate the data position in the card, when the card is not issued by "Mifare Card Issuer"
software. And you must set the "Offset" (Max 255, and base from zero) from the beginning of sector and set your data "Length" (Max 240). DF700A User Manual V1.0 16 Device Operation Example: If your card data is in the grey grid of sector, you have to set the "Offset" = 17, and set the "Length"= 20. AID Sector (or Non-MAD Sector) Block 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Block 1 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Block 2 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 DESFire Settings MAD-AID (default=F47030) MAD Application Identifier number is authorized and assigned by Mifare.net upon the customers request for registered Application Identifier in a Mifare application open system (AID:000000h~FFFFFFh).Or it is also possible for the user to define the AID himself for the application in user defined closed system without registering into MAD group. According to the AID, DF7XXA can find and read the corresponding application on the card. File ID (default=0) File ID is 0~15. There are three file types. Data file, Value file and Record file. DF7XXA will auto detect the type and output the data. Offset/Length (default=0 / 5) DF700A User Manual V1.0 17 The Data file will depend on the value to output data. The Value file will be sent the value out. The Record file will be sent the latest record data. Access Key No/Value (default=0 / 00000000000000000000000000000000) Key must be the same as the Read or Read/Write KEY of the card issued. This means DF7XXA only can read Device Operation the data on the card with the same key. DF App Admin Key (KeyNo=0) Reader Settings Reader ID (default=0) DF7XXA ID for multi link application. (ID: 0~63) Interface (default=Wiegand) DF7XXA can be set as Wiegand, RS232 or ABA-TK2 output. Read Modes (default=Card Data Only) Card Data Only Read card sector data only. If any error occurs (ex: App. key incorrect.), the reader will represent "Card Invalid" status. Card Data or CSN Read card sector data. When any error occurs (ex: App. key incorrect.), the reader will output "CSN". DF700A User Manual V1.0 18 Device Operation CSN Only Read card CSN (card ID) only. Output Modes (default=Once) Once Read card sector data only. If any error occurs (ex: App. key incorrect.), the reader will represent "Card Invalid" status. Continue Keeping sending data (or CSN) to host till card remove. Only for Mifare card. LED/Buzzer Settings DF7XX supports LED/Alarm configure. Set the LED/Buzzer to indicate the system status for end-user. Enable RS232 Command Set Control Enable this setting if you need to control LED/Buzzer by software command set. Note: This function is only available for the RS232 communication settings are (19200, N, 8, 1). DF700A User Manual V1.0 19 Device Operation RS232 LED/Buzzer command set frame STX J NUMBER (0~9) 02h 4Ah 30h~39h CR 0Dh Command Table NUMBER Descriptions 0 (30h) 1 (31h) 2 (32h) 3 (33h) 4 (34h) 5 (35h) 6 (36h) 7 (37h) 8 (38h) 9 (39h) All LED Off, Buzzer Off Green LED ON Green LED OFF Red LED ON Red LED OFF Buzzer Beep once Buzzer Beep 3 Times Green LED ON with Beep once Red LED ON with Beep 3 Times All LED ON (Orange) Enable Two Wires Control LED (Only for Promag reader of baud rate=19200, n, 8, 1) Set up the "Brown Wire Active Level", and Brown wire and Orange wire will follow the setting. Example: "Brown Wire Active Level"=High; Green light on when brown wire level was high. The red LED light on when orange wire level high. When both wire change level high at the same time, it will both light on without beep. Remark:
If Enable Two Wires Control LED checkbox is checked, the external LED/Buzzer control with high/low level control will be disabled. DF700A User Manual V1.0 20 Device Operation Read Idle Show LED color after power on or idle state. Brown Wire = PULSE (Internal: Card is Valid) Show LED color and beeps to indicate the end-user when brown wire inputted pulse signal, or card was passed by reader. Remark: This setting is enabled when Brown Wire Active Level is Disable. Brown Wire = Inactive (Internal: Card is Invalid) Show LED color and beeps to indicate the end-user when brown wire inputted GND signal, or card was failed by reader. Brown Wire = Active Show LED color and beeps to indicate the end-user that brown wire inputted the active level signal from host. Remark: This setting is enabled when Brown Wire Active Level is not Disable. Brown Wire Active Level (default=Disable) Set brown wire active level condition with host status. Disable Disable the brown wire. The LED/buzzer is controlled by settings. High Brown wire active state is in high logic, normal state is in low logic (normal open). Low Brown wire active state is in low logic, normal state is in high logic (normal closed). Remark: If setting Active Low, you may have to connect the brown wire to a pull-up resistor (1K~10K) with 5VDC. Control Brown wire After Data Output The brown wire will be enabling after finished output the card data or CSN. Any Time The brown wire enabled in any time. Note:LED/Buzzer can be controlled by the externally high/low level controller also. (See Annex E.) DF700A User Manual V1.0 21 Wiegand Settings Device Operation Add Reader ID (default=Disable) Set Wiegand output data to include the Reader ID when it is checked. Custom Preamble (default=Disable) Set the Wiegand output data to include prem Add Reader ID (default=Disable) Set Wiegand output data to include the Reader ID when it is checked. Custom Preamble (default=Disable) Set the Wiegand output data to include preamble code when it is enabled. This code only combines with CSN output. Number of Bits (default=26) Set the Wiegand output type you want to meet your host (or terminal). It can be 1 to 128. With parity (default=Enable) Set data with or without parity bit. If this is enabled, it will automatically add parity bit when sending output data. Bit Sequence (default=Standard) Set the Wiegand output data sequence, and it can be a standard data sequence (MSB first) or a reverse data sequence (LSB first). Byte Order (default=High Byte First) Set the Wiegand output data byte order, and it can be high byte first or low byte first. DF700A User Manual V1.0 22 Device Operation Alive Event is reserved. ABA-TK2 Settings Number of Digital (default=10) Set the number of digital codes for TK2 output. Add Reader ID (default=Disable) Add Reader ID into TK2 data. Output Data Order (default=MSB First) Set the TK2 data sequence order. Data Conversion (default=BIN to DEC) Select card data format to convert. BIN to DEC (the card is issued by Mifare Card Issuer.) Decimal String (ex. "123456") BCD Direct (Memory Map) Byte to DEC DF700A User Manual V1.0 23 RS232/485 Settings Device Operation Baud rate (default=9600) The working range can be set from 2400 to 57600 (depends on the device). Heart beat (default=disabled) Click to select the interval time of periodically sending the heart beat data to host via RS232/485 interface. The heart beat data format is: E + H + Device Serial Number. Example Header 45h E 48h H Device Serial Number 43h C 34h 4 42h B 45h E 35h 5 42h B 24h 4 32h 2 If you want an end character in the end of the heart beat data, for example CR, then you can select CR box in Package group then update to reader. The interval of sending heart beat data can be:
DF700A User Manual V1.0 24 Device Operation Data Sequence (default=MSB first) The output data sequence order can be set to "LSB" first or "MSB" first. Package (default=Header (02h) + CR + LF + Trailer (03h)) To set a packet which includes the Header, Reader ID, Data Length, CR, LF and Trailer. (Header:
00h~FFh, Trailer: 00h~FFh). Output Format (default=Hex String) The output format can be "Binary" or "Hex String. Note:
(1) Wiegand output data packet with Reader ID Standard Parity (Even) Reader ID
(MSB) Data Bits (LSB) Parity (Odd) Reverse Parity (Odd) Reader ID
(LSB) Data Bits (MSB) Parity (Even)
(2) RS232/RS485 output data packet with Header, Reader ID and Trailer Header Reader ID
(LSB) Data Bytes (MSB) Trailer
(3) ABA-TK2 with Reader ID MSB First LSB First SS SS Reader ID
(MSB) Digital Code (LSB) Reader ID
(LSB) Digital Code (MSB) ES ES LRC LRC Remark: The readers all configuration items are written only, which means the readers settings cannot be read to show them on software UI, so any user cannot read the configuration items from the reader to get the App Key, this is very important to protect your App Key and all configuration items. DF700A User Manual V1.0 25 Configured Card Settings Device Operation Configured Card Enabled (default=Enable) Can allow your reader change configuration by Mifare Card. Key (default=000000000000) To be the Mifare Key A for allowed the configured card. DF700A User Manual V1.0 26 Make a Configured Card DF7XX supports updating the reader by reading Configured Card. This function is specially using when stand alone system. The following steps guide you how to make a configured card. Device Operation Step 1:
Configure the reader. Click to select Configured Card Enabled, and then click Update Reader. Step 2:
Prepare PCR310 reader and connect it to PC for issuing config card. Select the series corresponding, or load the configuration file. Select the readers model name. Click "OK". DF700A User Manual V1.0 27 Device Operation Remark: The corresponding series are DF700/DF750 Series. Step 3:
Configure all settings as normal. Click Configure Card. DF700A User Manual V1.0 28 Device Operation Step 4:
Put a Mifare card in the PCR310 cassette. Enter MAD Admin Key and Configured Key
(which has been updated to the corresponding reader). Click Create. Step 5:
Take this card to approach Remark: If the reader you use is the one with the the reader for configured settings. keypad, you need to press *00# to enter the configuration mode (within 10-seconds beeps) and press * to exit the configuration mode. In short, to make the configured card work, please press *00# on the reader (the reader will start to sound the beeps) and then present the configured card to the reader. DF700A User Manual V1.0 29 Device Operation Data Output Reader Test After readers configurations have been updated success, you can use Test function to check readers configurations have been correctly stored. Use to decode with parity when Wiegand interface not with parity. Click to clear the output data, or double click the output area. Available COM ports. Click to re-connect COM port. LED [0]~[9] (default=Disable) Manually to control LED/buzzer by commands [0]~[9]. Enable this by Enable RS232 Command Set Control. Buffering (default=Disable) Manually to control data output timing by the command [Buffering Data]. Enable this by Buffering Enabled. Relay (default=Disable) Not available for DF7XXA. DF700A User Manual V1.0 30 Device Operation Test Read Card After Updating The following steps guide you how to test read card. 1. After set configurations in the Reader Utility software, you can click Update Reader to update the currently configurations to the reader. 2. Or, click Test to update configurations and verify output data. 3. Take an issued Mifare card and approach it to the reader, You can see the output data on Reader Test window. Example: Wiegand 34 bits output data with Standard bit sequence Remark: (1) When using reader-kit to test Wiegand (or TK2) signal, this test may be failed if the processor of computer is too slow. (2) When using reader-kit to test Wiegand (or TK2) signal, you need to connect to the physical COM port. Test Key Pad After Updating Simply Output 1234 RS232 Interface RS232 interface Settings DF700A User Manual V1.0 31 Device Operation RS232 interface Output: Press 1234 + #
Result=1234 Simply Output 1234 ABA-TK2 Interface ABA-TK2 interface Settings DF700A User Manual V1.0 32 Device Operation ABA-TK2 interface Output: Press 1234 + #
Result=1234 Simply Output 1234 Wiegand Interface DF700A User Manual V1.0 33 Wiegand interface Settings Device Operation Wiegand interface Output: Press 1234 + #
Result=1234 DF700A User Manual V1.0 34 Technical Support http://ftp.gigatms.com.tw/disks/disk5238/
Technical Support Find apps and source code Is your Download Center where you can View manuals and the knowledge base Download the latest firmware and software DF700A User Manual V1.0 35 Appendix Appendix Wiegand Interface The Data 1 and Data 0 signals are held at a logic high level unit, the reader is ready to send a data stream. The reader places data as asynchronous low-going pulses on the Data 1 or Data 0 lines to transmit the data stream to Host. The Data 1 and Data 0 pulses will allowable pulse width times and pulse interval times for the reader. Data 1 Signal Data 0 Signal
` Tpw Tpi Tpw Tpi Pulse Times Symbol Description Tpw Tpi Pulse Width Time Pulse Interval Time Typical Time 100us +/- 3%
1.9ms +/- 3%
Wiegand Packet (Without Reader ID) Standard (Default) Parity(Even)
(MSB) Data Bits (LSB) Parity(Odd) Reverse (Option) Parity(Odd)
(LSB) Data Bits (MSB) Parity(Even) DF700A User Manual V1.0 36 Example of connecting Wiegand wires (the pull high resister must >= 10K Ohm) Reader 7.5~24VDC
(Red) HOST/Terminal 5VDC 10K ohm 10K ohm Pull high resistor
>=10K Ohm Appendix Data 1 (White) Data 0 (Green)
(Black) GND GND Optional: External LED/Buzzer Control (Brown) DF700A User Manual V1.0 37 Appendix ABA-TK2 Interface Example of the timing for card present, clock (strobe) and data
/CARD PRESENT Leading Zero Data Trailing Zero
/DATA
/STROBE
(CLOCK) 0 0 0 . 0 1 1 0 1 0 0 1 . . . 0 0 0 STROBE Width Approximately 25~50% Of Bit Time Bit Time 40IPS (min:280us, typ:330us, max:480us) DATA The data signal is valid while the clock is low. If the Data signal is high, the bit is a zero. If the Data signal is low, the bit is a one. CLOCK (STROBE) The Clock signal indicates when Data is valid. It is recommended that Data be loaded by the user with the leading edge (negative) of the Strobe. CARD PRESENT Card Present will go low after flux reversals from the Reader. Card Present will return high after the last flux reversal. DF700A User Manual V1.0 38 Appendix HOST/Terminal Example of connecting ABA TK2 wires 7.5~24VDC
(Red) Reader Card Present (Orange) Clock (White) Data (Green)
(Black) GND GND Optional: External LED/Buzzer Control (Brown) DF700A User Manual V1.0 39 Appendix HOST/Terminal RS232 Interface Example of connecting RS232 wires 7.5~24VDC
(Red) Reader TXD (Yellow) GND (Black) GND GND Optional: External LED/Buzzer Control (Brown) DF700A User Manual V1.0 40 Appendix DF700A User Manual V1.0 41 External LED/Buzzer Control DF7XXA supports the external LED/Buzzer control for Terminal (or Host) to prompt end-user the card data is invalid or valid. Use Brown wire to control the LED/Buzzer of DF7XX. Appendix Examples (Active High)
(1) Show External Invalid Status Data Output Alarm Control (Brown)
(2) Show Card Valid Status Data Output Alarm Control (Brown) Min 100 ms Min 100 ms Note 1. 2. 3. You can configure the LED/buzzer status by reader utility software. Send one pulse to show the Extern Invalid LED/buzzer status. Send three or more pulse to show the Card Valid LED/buzzer status. DF700A User Manual V1.0 42 Caution Caution CAUTION:
The crossed out wheeled bin label that can be found on your product indicates that this product should not be disposed of via the normal household waste stream. To prevent possible harm to the environment or human health please separate this product from other waste streams to en-sure that it can be recycled in an environmentally sound manner. For more details on available collection facilities please contact your local government office or the retailer where you purchased this product. This information only applies to customers in the European Union. DF700A User Manual V1.0 43 Update History Update History 2023/6/26 V1.0 Original Release DF700A User Manual V1.0 44
1 | ID Label and Location | ID Label/Location Info | 1.47 MiB | July 31 2023 |
DF700A DF700A-00 REV.X W XADF700A DF700A DF710A-00 REV.X W XADF700A DF700A DF710A-U2 REV.X W XADF700A ACC-D5280 F-MDS REV.X W XADF700A
1 | Agent Designation Attestation | Attestation Statements | 192.74 KiB | July 31 2023 |
Agent letter FCC attestation statement Kiwa RF_753, Issue 2 Page 2 of 2 15-02-2023 Revision Record Sheet:
Revision Section Page number Date Remark(s) issued by number 01 02 07-02-2023 1st version RvdM 1 15-05-2023 Added FRN to Agent details RvdM Issued/modified by Function Revision Date
: Richard van der Meer
: Certification assessor
: 02
: 15-02-2023 Verified by Function Date
: Willem Jan Jong
: Team Lead
: __-02-2023 Released by Function Date of release:
: Axel Gase
: Manager Quality Assurance
: __-02-2023
1 | Confidentiality Request Letter | Cover Letter(s) | 144.12 KiB | July 31 2023 |
& GIGA-TMS INC. Quality, Delivery & Service DATE : 2023/07/07 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: WXADF700A Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:
(List here the documents for which you are seeking confidentiality for example ...)
* Schematics e Block diagram e Operation description These materials contain. trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors.
=~ j; L suman Jo fe WAVE FCC grantee contact person information. Name/Title: M.T. WANG/ General Manager Company Name: GIGA-TMS INC. Address: 8F, NO.31, LANE 169, KANG-NING ST.,HSI-CHIH, NEW TAIPEI CITY, Taiwan TEL: 02 2695-4214 FAX: 02 2695-4213 Email: mtwang@gigatms.com.tw
1 | Covered List Attestation Letter | Attestation Statements | 139.32 KiB | July 31 2023 |
& GIGA-TMS INC. Quality, Delivery & Service Covered Equipment Certification Attestation Letter DATE Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: WXADF700A GIGA-TMS INC. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not covered equipment. GIGA-TMS INC. (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. J). 7 WANG Printed name: M.T. WANG Title: General Manager Company Name: GIGA-TMS INC. Date: 7/7/2023 Signed:
1 | Power of Attorney Letter | Cover Letter(s) | 135.39 KiB | July 31 2023 |
& GIGA-TMS INC. Quality, Delivery & Service DATE : 2023/07/07 FCC ID: WXADF700A Dear Sir,
| hereby have entrusted the following person to be a proxy regarding application for Type Certification. Company name: Wendell Industrial Co., Ltd. Address: No. 119, Wugong 3rd Rd., Wugu Dist.,New Taipei City 248, Taiwan (R.O.C.) Name: Gary Wu For instances where our authorized agent signs the application for certification on our behalf, |
acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko North America, Inc, still resides with us. Signature 7]. 7 WA d) FCC grantee contact person information. Name/Title: M.T. WANG/ General Manager Company Name: GIGA-TMS INC. Address: 8F, NO.31, LANE 169, KANG-NING ST.,HSI-CHIH, TEL: 02 2695-4214 FAX: 02 2695-4213 Email: mtwang@gigatms.com.tw
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2023-07-31 | 13.56 ~ 13.56 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2023-07-31
|
||||
1 | Applicant's complete, legal business name |
GIGA-TMS INC.
|
||||
1 | FCC Registration Number (FRN) |
0018295048
|
||||
1 | Physical Address |
8F, NO.31, LANE 169, KANG-NING ST.,HSI-CHIH
|
||||
1 |
NEW TAIPEI CITY,, N/A
|
|||||
1 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
v******@nemko.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
WXA
|
||||
1 | Equipment Product Code |
DF700A
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
M******** W****
|
||||
1 | Title |
General Manager
|
||||
1 | Telephone Number |
886-2********
|
||||
1 | Fax Number |
886-2********
|
||||
1 |
m******@gigatms.com.tw
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | RFID Reader | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Wendell Industrial Co., Ltd
|
||||
1 | Name |
K****** K********
|
||||
1 | Telephone Number |
+886-******** Extension:
|
||||
1 | Fax Number |
+886-********
|
||||
1 |
S******@wendell.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 13.56000000 | 13.56000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC