Product Manual The WP-8320 product is a high-quality wireless charger, which can not only wirelessly charge Qi standard wireless charger phones such as Apple, Samsung, and Huawei, but also merge other corresponding brand wireless devices to supply power; This product has a series of safety measures such as automatic detection, overcurrent protection, undervoltage protection, overvoltage protection, temperature protection, FOD, etc.; This model is composed of charger protocol adaptation circuit, wireless charging management circuit, and MCU main control circuit
(Appearance) Features:
Wireless Charging Typc C Input Port Tech Specifications:
Inpurt: 5V/2A 9V/2A 12V/1.5A
(Can support QC2.0/QC3.0/PD2.0/PD3.0 fast charge) Output:5V/1A 5W 9V/1.67A 15W(MAX) 12V/1.5A 15W Size:60*60*6.5mm Weight:44g Precautions for transportation Wireless chargers should be packed into boxes for transportation. During transportation, avoid violent vibration, stamping or backlog, and prevent sun and rain. Cars, trains, ships, and other means of transportation can be used for transportation. Period of Warranty The shelf life of wireless charging is one year from the date of shipment. If it is proved that the defect of the product was formed during the manufacturing process and not caused by the user's abuse and misuse, the company is responsible for returning the product. WARNING-When using this product, basic precautions should always be followed:Read all the 1.Do not use the device in excess of its output rating. Overload outputs above the rating may instructions before use. result in a risk of fire or injury. 2.Do not use the device if damaged or modified.Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury. 3.Do not disassemble the device. For repairs, seek a qualified service professional. Incorrect reassembly may result in a risk of fire or injury. Do not expose the device to fire or excessive temperatures. Exposure to fire or temperatures above 104F (40C) may result in explosion.To ensure product safety, ensure that qualified service professionals use only identical replacement parts. device. 4.Attachments on the back of your phone can impede the effectiveness of the wireless charger, and lead to overheating. Please remove attachments from the phone before charging on this 5.Do not overcharge your phone. The unit may become hot under excessive use. Remove your phone once it is fully charged. 6.Never charge your phone for more than 7 hours at a time.To reduce the risk of injury, close supervision is required when the product is used near children. Do not expose the device to moisture. FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. FCC RF exposure statement:
- Consult the dealer or an experienced radio/TV technician for help. The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected. FCC IDPLE-WP-8320