FCC ID: 2AWB3IOTEDGE3100M IoT Edge Gateway

IoTEDGE3100M Fanless Embedded System Hardware Users Manual Revision 1.0 Contents Preface Contents ii

...vi Chapter 1 General Introduction .................................................................................... 1 Chapter 2 Mechanical Dimensions................................................................................ 7 Chapter 3 Hardware Function Description .................................................................. 10 Chapter 4 Hardware Installation ............................................................................... 34 Chapter 5 Function Settings......................................................................................... 44 Chapter 6 Wifi module model......................................................................................... 46 Appendices ...................................................................................................................... 52 2 Chapter 1 General Introduction This chapter includes:

Overview System Features System Specification Power Specification Supported CPU List Packing List Ordering Information 1 1.1 Overview Eagle Eyes series IoTEDGE3100M embedded PC is a high-performance. Fanless Embedded Systems deliver outstanding performance, power productivity and flexible manageability for performance-driven embedded computing applications. The all-in-one design is fanless embedded PC provide outstanding performance, versatile I/O functions, flexible expansion features, and rugged reliability for embedded applications such as Machine Vision, Rolling Stock, Intelligent Surveillance, Smart Manufacturing, ITS, Intelligent Automation, Vehicle Computing, and any Industry 4.0 performance-driven real-time embedded computing applications. IoTEDGE3100M 2 1.2 System Specifications IoTEDGE3100M Series Specifications Model Name Intel Platform Skylake U (default) / Kaby lake U (by request) System Core Graphics Max. Memory Intel HD Graphics 510/520; Intel HD Graphics 610/620 SLB9665 (TPM 2.0) / SLB9635 (TPM 1.2 optional) Non-volatile user data storage, manufacturing and board information, board statistics, hardware monitoring, fan control, I2C bus, Power loss control, Multi-stage watchdog 0.96-inch LCM display module for warning & status display Power-in Protection Reverse-Voltage, Under-Voltage, Over-Current/Voltage Enbik Ekits Power CPU BIOS TPM Operating System AI Controller DDM API Library DC input Surge Protection Remote Control Ignition Control Power Mode Triple Display Mode Giga Ethernet with PoE USB 3.0 USB 2.0 DIO Isolated DIO Audio IoTEDGE3100M Core i7-6600U/ i7-7600U Core i5-6300U/ i5-7300U Core i3-6100U/ i3-7100U Celeron 3955U/ 3965U 32GB AMI 128Mbit SPI BIOS Windows / Linux DDMI & DMCI 9~36V, max. 10A 80V/1ms AT/ATX (BIOS setting) 2x DP (4K) + 1x VGA Optional (IEEE 802.3at, 30W) Yes Yes 4x NA 16-bit (programmable) Optional (8-bit DI & 8-bit DIO) Mic in, Line-out 3 External I/O UART (serial port) 2x RS-232/422/485 Giga Ethernet 4x Giga LAN (RJ45) 2x Giga LAN (RJ45) 4x Giga LAN (M12) Model Name IoTEDGE3100M Storage 1x (mixed with Mini-PCIe) 1x (M Key 2242) Internal 2.5 Drive Bay mSATA M.2 (SATA) Removable Drive Bay RAID Mode Mini-PCIe PCI Express Internal USB 2.0 Dongle Antenna Opening Mounting Operating Temperature Extended Operating Temperature*

Storage Temperature Expansion PCI IOM Mechanical Dimensions Environment Certification EMC 1x NA NA 2x NA NA NA 1x 4x 72(W) x 150(D) x 192(H) mm

(2.83" x 5.91" x 7.56") Desk bracket / wall-mount

-20 ~ 50 (-4F ~ 122F)

-25 ~ 70 (-13F ~ 158F)

-40 ~ 85 CE / FCC Relative Humidity 95% @ 40C (non-condensing)

* For more information, please contact Enbik 3. Power Specifications DC Voltage Input: 9V~36V DC power Connector: 3-pin terminal block, 5.08mm pitch Power Input Protection: Reverse-Voltage, Over-Voltage, Under-Voltage, Over-Current Surge Protection: 80V/1ms 4. Supported CPUs IoTEDGE3100M embedded PCs support the 7th/6th Generation Intel Core i7/i5/i3 processor (Platform: Kaby Lake-U/Skylake-U). You may select from the processors listed below according to your cost and performance requirements. 4 Intel 6th Sky Lake U:

Core i7-6600U Processor (2 cores/4 threads, 2.6 GHz/3.4 GHz, 4MB cache, 15W TDP) Core i5-6300U Processor (2 cores/4 threads, 2.4 GHz/3.0 GHz, 3MB cache, 15W TDP) Core i3-6100U Processor (2 cores/4 threads, 2.3 GHz, 3MB cache, 15W TDP) Celeron G3955U Processor (2 cores/2 threads, 2.0 GHz, 2MB cache, 15W TDP) Intel 7th Kaby Lake U:

Core i7-7600U Processor (2 cores/4 threads, 2.8GHz/3.9 GHz, 4MB cache, 15W TDP) Core i5-7300U Processor (2 cores/4 threads, 2.6 GHz/3.5 GHz, 3MB cache, 15W TDP) Core i3-7100UProcessor (2 cores/2 threads, 2.2 GHz, 3MB cache, 15W TDP) 1.5 Packing List When you open the IoTEDGE3100M package, check immediately if the package contains all the items listed in the following table. If any items are missing or damaged, please contact your local dealer or Enbik for further assistance. Item Description 1 2 Eagle Eyes IoTEDGE3100M Series Embedded Box PC Rubber Foot x4 with M2.5x6 screws x4 Qty 1 1 1.6 Ordering information Additional Accessories Model Name CBL-S01 TBP5-S03 SATA (Data + Power) cable x1 3-pin, 5.08mm pitch Female Terminal Block Plug for DC input x1 Description TBP3-S05 5-pin, 3.81mm pitch Female Terminal Block Plug for Remote Connector x1 TBP3-D20 2x10-pin, 3.5mm pitch Female Terminal Block Plug for DIO Connector x1 WBK-

Wall Mount Bracket x2 with M2.5x6 screws x4 IoTEDGE3100M Memory Model Name DDR4-2400-4G-SO SO-DIMM DDR4-2400 4GB memory module DDR4-2400-8G-SO SO-DIMM DDR4-2400 8GB memory module DDR4-2400-16G-SO SO-DIMM DDR4-2400 16GB memory module Description DDR4-2400-4G-SO-i SO-DIMM DDR4-2400 4GB memory module (Wide Temp.) DDR4-2400-8G-SO-i SO-DIMM DDR4-2400 8GB memory module (Wide Temp.) DDR4-2400-16G-SO-i SO-DIMM DDR4-2400 16GB memory module (Wide Temp.) 5 Storage Model Name Description M2-2242-SATA-32G M.2 M-key 2242 32GB SATA disk M2-2242-SATA-64G M.2 M-key 2242 64GB SATA disk M2-2242-SATA-128G M.2 M-key 2242 128GB SATA disk M2-2242-SATA-256G M.2 M-key 2242 256GB SATA disk M2-2242-SATA-32G-i M.2 M-key 2242 32GB SATA disk (Wide Temp.) M2-2242-SATA-64G-i M.2 M-key 2242 64GB SATA disk (Wide Temp.) M2-2242-SATA-128G-i M.2 M-key 2242 128GB SATA disk (Wide Temp.) M2-2242-SATA-256G-i M.2 M-key 2242 256GB SATA disk (Wide Temp.) mSATA-32G mSATA-64G mSATA-128G mSATA-256G mSATA-32G-i mSATA-64G-i mSATA 32GB SATA disk mSATA 64GB SATA disk mSATA 128GB SATA disk mSATA 256GB SATA disk mSATA 32GB SATA disk (Wide Temp.) mSATA 64GB SATA disk (Wide Temp.) mSATA-128G-i mSATA 128GB SATA disk (Wide Temp.) mSATA-256G-i mSATA 256GB SATA disk (Wide Temp.) SSD2.5-250G SSD2.5-500G 2.5" SSD 250GB Disk 2.5" SSD 500GB Disk SSD2.5-1T 2.5" SSD 1TB Disk SSD2.5-250G-i 2.5" SSD 250GB Disk (Wide Temp.) SSD2.5-500G-i 2.5" SSD 500GB Disk (Wide Temp.) SSD2.5-1T-i 2.5" SSD 1TB Disk (Wide Temp.) HDD2.5-500G 2.5" HDD 500GB Disk HDD2.5-1T HDD2.5-2T HDD2.5-3T HDD2.5-4T HDD2.5-5T 2.5" HDD 1TB Disk 2.5" HDD 2TB Disk 2.5" HDD 3TB Disk 2.5" HDD 4TB Disk 2.5" HDD 5TB Disk AC-DC Power Adapter Model Name Description ADT-24V90-T3A 24V/60W AC-DC power adapter with pitch 5.08mm 3-pin terminal block plug ADT-24V120-T3A 24V/120W AC-DC power adapter with pitch 5.08mm 3-pin terminal block plug ADT-24V160-T3A 24V/160W AC-DC power adapter with pitch 5.08mm 3-pin terminal block plug ADT-24V280-T3A 24V/280W AC-DC power adapter with pitch 5.08mm 3-pin terminal block plug For more information, please contact Enbik. 6 Chapter 2 Mechanical Dimensions This chapter views of the dimensions, including:

Top View Front View Rear View Left-Side View Right-Side View Bottom View 7 2.1 Top View Unit: mm IoTEDGE3100M 8 2.2 Front View Unit: mm IoTEDGE3100M 9 Chapter 3 Hardware Function Description This chapter includes:

I/O Layout Front Panel I/O Functions Rear Panel I/O Functions Right-Side Panel I/O Functions Internal I/O Functions 10 3.1 I/O Layout Front I/O IoTEDGE3100M DDM GbE DIO DC-IN Remote USB 3.0 DP RS-232 VGA Audio Power 11 3.2 Front Panel I/O Functions Most common computer I/O functions are placed on the front panel. This section describes each I/O function on the front panel. 3.2.1 Power Button with Power LED The Power Button is a non-latched switch with dual color LED indicator. It indicates power status: S0, S3 and S5. LED Color Solid Blue Solid Orange Power Status S0 S3, S5 System Status System working Suspend to RAM, System off with standby power More detailed LED indications are listed as follows:

Power Mode ATX Mode AT Mode Ignition Mode Power On Solid Blue Solid Blue Solid Blue Power Off Solid Orange Suspend to RAM, Hibernate Solid Orange

ATX Mode:

Note AT Mode:

Press the power button to power on the system. The blue LED will turnon. When the system is powered off, the orange LED will turn on. In case of system error, press the power button for at least 4 seconds to shut down the system directly. Plug in the DC input power, the system will auto power on and the blue LED will turn on. When the system is powered off, the system will turn-off the LED. In case of system error, you can just press the power button for at least 4 seconds to shut down the system directly Ignition Mode:

External ignition switch turn-on, the system will power on and the blue LED will turn on. Then plug in the DC input power. External ignition switch turn-off, the system will turn off and the LED will turn off. The powerbutton will be not function at ignition. 12 3.2.2 Reset Button The hardware Reset Button is used to reset the system without power off the system. Press the Reset Button for a few seconds to reset the system. 3.2.3 HDD LED If the LED is on, it indicates that the systems storage is functional. If it is off, it indicates that the systems storage is not functional. If it is flashing, it indicates data access activity. HDD LED Storage Active LED Status Flash Green 4. Dynamic Display Module (DDM) The Dynamic Display Module (DDM) is a 0.96 LCM module, it displays the following information:

Customers information Logo Part Number CPU temperature Power consumption RTC battery voltage DC in voltage Warning message PoE status POST code Hardware healthy status Customized information 13 3.2.5 VGA Connector There is a high-resolution VGA display output on the front panel. It supports display resolutions up to 1920x1080. Pin Name Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 RED GREEN BLUE RES/NC GND RGND GGND BGND DDC +5V SGND ID0 SDA VSYNC SCL Red Video (75-ohm, 0.7 V p-p) Green Video (75-ohm, 0.7 V p-p) Blue Video (75-ohm, 0.7 V p-p) Reserved Ground Red Ground Green Ground Blue Ground

+5 VDC Sync Ground Monitor ID Bit 0 (optional) DDC Serial Data Line Vertical Sync DDC Data Clock Line HSYNC or CSYNC Horizontal Sync (or Composite Sync) 3.2.6 DisplayPort Connectors The system provides 2 high resolution DisplayPort (DP) outputs on the front panel. It supports display resolutions up to 4096x2304@60Hz. 14 Pin Name Description 1 ML_Lane 0 (p) Lane 0 (positive) 2 GND Ground 3 ML_Lane 0 (n) Lane 0 (negative) 4 ML_Lane 1 (p) Lane 1 (positive) 5 GND Ground 6 ML_Lane 1 (n) Lane 1 (negative) 7 ML_Lane 2 (p) Lane 2 (positive) 8 GND Ground 9 ML_Lane 2 (n) Lane 2 (negative) 10 ML_Lane 3 (p) Lane 3 (positive) 11 GND Ground 12 ML_Lane 3 (n) Lane 3 (negative) 13 CONFIG1 Connected to Ground. Pins 13 and 14 may either be directly connected to ground or connected to ground through a pulldown device. 14 CONFIG2 connected to Ground 15 AUX CH (p) Auxiliary Channel (positive) 16 GND Ground 17 AUX CH (n) Auxiliary Channel (negative) 18 Hot Plug Hot Plug Detect 19 Return Return for Power 20 DP_PWR Power for connector (3.3 V 500 mA) IoTEDGE3100M also supports Multi-Stream Transport (MST) as shown in the following MST Display Resolutions Table:

Multi-Stream Transport Display One panel Display Two panel Displays concurrently Three panel Displays concurrently Max. Resolution 4096x2304@60Hz 2880x1800@60Hz 2304x1440@60Hz To achieve optimal DP output resolution in Windows, you need to install the corresponding graphics driver. 15 3.2.7 Audio Line-out and Mic-in Audio Jacks Audio functions provided using Intel High Definition Audio and Realtek ALC892 codecs. There is one 3.5mm audio jack on the front panel with Line-out (Left/Right stereo) and Mic-in (Mono) signals. Line-out and Mic-in Connector Pin 1 2 3 4 Name Mic-In Audio_R Audio_L GND Description Microphone input signal Right Audio out signal Left Audio out signal Audio Ground 3.2.8 USB 3.0 Connectors There are four USB 3.0 Type A connectors with signals directly connected to the Intel XHCI controller, each port supporting up to 5GBs and 5V/0.9A power. They are compliant with Super Speed, High Speed, Full Speed and Low Speed USB signalling rates. Each port can be powered on/off by BIOS or Enbik Application Program. USB 3.0 Connector 16 Pin 1 2 3 4 5 6 7 8 9 Name VBus USB D-

USB D+

GND StdA_SSRX-

StdA_SSRX+

GND_DRAIN StdA_SSTX-

StdA_SSTX+

Description

+5V Power USB 2.0 data Ground for power return SuperSpeed receiver SuperSpeed receiver Ground for signal return SuperSpeed transmitter SuperSpeed transmitter 3.2.9 GPIO/Isolated DIO 16-bit digital programmable general-purpose input and output (GPIO) is standard. Isolated 8-bit DI & 8-bit DO is optional. The GPIO support 3.3V or 5V signal and are configurable by BIOS or Application Program. DI/DO Safety-Related Certifications:

DI DO 2500-V PART NUMBER PACKAGE BODY SIZE (NOM) RMS Isolation for 1 minute per UL 1577 Approved by VDE, DIN EN60747-5-2(_) (as an option), file No. 40009162 (as model No. PC3H4) UL flammability grade (94V-0) DI/DO Operation Characteristics:

Parameter DI Operation Voltage 5 ~ 48V DC Input/Output Current Limit Turn On Delay Time (Max.) 25 uS 25 uS Turn Off Delay Time (Max.) 25 uS 17 2500-V PART NUMBER PACKAGE BODY SIZE (NOM) RMS Isolation for 1 minute per UL 1577 4242-V ISO7131CC PK Isolation per DIN V VDE V 0884-10

(VDE V 0884-10):2006-12, 566 V ISO7140CC PK Working Voltage CSA Component Acceptance Notice 5A, IEC ISO7141CC 60950-1 and IEC 61010-1 End Equipment ISO7141FCC Standards CQC Certification per GB 4943.1-2011 DO Source Mode:5 ~ 48V DC Sink Mode: 5~40V DC 100mA Source Mode: 15 uS Sink Mode: 60uS Source Mode: 15 uS Sink Mode: 60uS GPIO/Isolated DIO Terminal Block Programmable DIO Description Pin No. Description Pin 1 2 3 4 5 6 7 8 9 10 Pin 1 2 3 4 5 6 7 8 9 10 GPIO10 (Default GPI bit0) GPIO11 (Default GPI bit1) GPIO12 (Default GPI bit2) GPIO13 (Default GPI bit3) GPIO14 (Default GPI bit4) GPIO15 (Default GPI bit5) GPIO16 (Default GPI bit6) GPIO17 (Default GPI bit7) Digital Input COM GND Isolated DI bit0 Isolated DI bit1 Isolated DI bit2 Isolated DI bit3 Isolated DI bit4 Isolated DI bit5 Isolated DI bit6 Isolated DI bit7 Digital Input COM Isolated GND 11 12 13 14 15 16 17 18 19 20 11 12 13 14 15 16 17 18 19 20 GPIO0 (Default GPO bit0) GPIO1 (Default GPO bit1) GPIO2 (Default GPO bit2) GPIO3 (Default GPO bit3) GPIO4 (Default GPO bit4) GPIO5 (Default GPO bit5) GPIO6 (Default GPO bit6) GPIO7 (Default GPO bit7) GND VCC Isolated DO bit0 Isolated DO bit1 Isolated DO bit2 Isolated DO bit3 Isolated DO bit4 Isolated DO bit5 Isolated DO bit6 Isolated DO bit7 Isolated GND Isolated VCC Isolated DIO Description Pin No. Description 3.2.10 PoE/Gigabit Ethernet Port The GbE ports are located on front panel. Ethernet Port 1 is powered by Intel I219 Ethernet controller, supporting 10/100/1000 Mbps, PXE , Wake on LAN and iAMT11. Connector is RJ45 with LED indicators or M12 A code connector depending on the model. Ethernet Ports 2~4 are powered by Intel I210 Ethernet controller, supporting 10/100/1000 Mbps, PXE , Wake on LAN and IEEE-1588 header. Connector is RJ45 with LED indicators or M12 A-code connector depending on the model. Each port optional supports IEEE 802.3at (PoE+) Power over Ethernet connection delivering up to 25.5W/54V per port and 1000BASE-T GigE data signals over standard Ethernet Cat 5/Cat 6 cable. 18 RJ45 Connector 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 TX+

TX-

RX+

RX-

TX-

RX+

TX+

RX-

Pin No 10 / 100 Mbps 1000 Mbps Description PoE (optional) BI_DA+

BI_DA-

BI_DB+

BI_DC+

BI_DC-

BI_DB-

BI_DD+

BI_DD-

Bi-directional pair A +

Bi-directional pair A -

Bi-directional pair B +

Bi-directional pair C +

Bi-directional pair C -

Bi-directional pair B -

Bi-directional pair D +

Bi-directional pair D -

PoE+

PoE+

PoE-

PoE-

Ethernet Active/Link LEDs Active/Link LED (left) Off Solid Yellow Flashing Yellow Status Disconnected Connected, no data transmission Connected, data transmitting/receiving Ethernet Speed LED Right Top Link LED Off Solid Green Solid Orange M12 A-code Connector Status 10 Mbps Link 100 Mbps Link 1000 Mbps Like Pin No 10 / 100 Mbps 1000 Mbps Description PoE (optional) BI_DC+

BI_DD+

BI_DD-

BI_DA-

BI_DB+

BI_DA+

BI_DC-

BI_DB-

Bi-directional pair C +

Bi-directional pair D +

Bi-directional pair D -

Bi-directional pair A -

Bi-directional pair B +

Bi-directional pair A +

Bi-directional pair C -

Bi-directional pair B -

19

PoE+

PoE-

PoE+

PoE-

3.2.11 PoE LEDs 4 LEDs indicate the PoE status. The LED will light when the PoE port links to PoE PD of each device. The photo is only IoTEDGE3100M. Note 3.3 Rear Panel I/O Functions To fit more general application requirements, IoTEDGE3100M offers more I/O functions on its rear panel. In this section, well illustrate each I/O function on the rear panel. 3.3.1 3-Pin Euro type Terminal Block for System DC Input Eagle Eyes AI allows a wide range of DC power input from 9V to 36Vdc. It offers a 3-pin, pitch 5.08mm Euro Type pluggable terminal block. The 3-pin power connector is used to connect the power plug of an AC/DC adapter. Its convenient for indoor usage where AC power is usually available. Since there is no specific rule of pin definition for this type of connector, please always confirm the polarity of the power connector in prior to plug it into IoTEDGE3100M if youre not using the power adapter provided by Enbik. 20 Name DC V+

DC V-

DC INPUT +

DC INPUT -

Pin 1 2 3 Ground Earth Ground or Chassis Ground Description Caution!

1. Make sure the polarity of the power plug is correct before plugging it into the system. 2. Please make sure the voltage of DC power supply is correct before you connect it to the IoTEDGE3100M system. Supplying a voltage over 36V will damage the system. 3.3.2 5-Pin Euro type Terminal Block for Power Remote & Ignition Control Pin 1 2 3 4 5 Name Remote +

PLED+

Description Remote control +

Power LED+

Remote GND Remote control Ground IGN+

IGN-

Ignition control+

Ignition control-

21 3.3.3 UART Ports Two RS-232/422/485 ports and two RS-232 ports on the rear panel for communicating with external devices. COM1~COM4 are located on the rear panel via 9-pin D-Sub male connectors. COM 1/2 can be configured for full RS-232, RS-422 or RS-485 with auto flow control communication. Mode selection is by BIOS, the default definition is RS-232. Each of the serial ports individually contains a programmable baud rate generator which is capable of dividing the input clock by a number ranging from 1 to 65535. The data rate of each serial port can be programmed from 115.2K baud (COM1 baud rate up to 912.6Kbit/s) and down to 50 baud. The character options are programmable for 1 start bit; 1, 1.5 or 2 stop bits; even, odd, stick or no parity; and privileged interrupts. Each port supports 128 bytes RX FIFO depths and 16 bytes TX FIFO depths. All transmitter outputs and receiver inputs feature robust electrostatic discharge (ESD) protection to 15kV Human Body Model (HBM) and 8kV IEC- 61000-4-2 Contact. Each receiver output has full fail-safe protection to avoid system lockup, oscillation, or indeterminate states by defaulting to logic-high output level when the inputs are open, shorted, or terminated but undriven. RS-485

(3-wire) Data-

Data+

GND

TxD-

TxD+

RxD+

RxD-

GND RTS-

RTS+

CTS+

CTS-

The following table describes the pin definition of UART ports. COM1, COM2:

UART mode RS-232 RS-422

(5-wire) RS-422

(9-wire) DCD#

RxD TxD DTR#

GND DSR RTS#

CTS#

RI#

Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Pin 9 Pin 1 Pin 2 Pin 3 Pin 4 D-Sub 9 Male COM1, COM2 COM3, COM4:

UART mode D-Sub 9 Male COM3, COM4 TxD-

TxD+

RxD+

RxD-

GND

22 RS-232 DCD#

RxD TxD DTR#

Description Data Carrier Detect Receive Data Transmit Data Data Terminal Ready Pin 5 Pin 6 Pin 7 Pin 8 Pin 9 GND DSR RTS#

CTS#

RI#

System Ground Data Set Ready Request to Send Clear to Send Ring Indicator 3.3.4 Wireless module LED for Mini-PCIe 2 ports Mini-PCIe sockets , it can support any WWAN/WLAN/WPAN Mini-PCIe wireless module, such as Wi-Fi . When a Mini-PCIe wireless module is installed and activited, the corresponding LED will light as described below. Mini Card LED WWAN Linked WWAN Active WLAN Linked WLAN Active WPAN Linked WPAN Active LED Status Solid Green Flash Green Solid Green Flash Green Solid Green Flash Green 23 3.3.5 RTC CMOS Battery Tray Swappable RTC CMOS battery tray. Caution!

Risk of explosion if battery is replaced with an incorrect type. Dispose of used batteries accordingly. 24 3.4 Antenna Holes 4 antenna holes on its left-side panel Caution!

1. Proposed SMA connector SPEC:

SMA screw length "minimum 10mm"

2. Proposed Antenna connector SPEC:

Antenna screw size "maximum 15mm"

25 3.5 Internal I/O Functions In addition to I/O connectors on the front/rear panel, the IoTEDGE3100M system provides other useful features via its on-board connectors, such as mSATA socket, Mini-PCIe sockets. This section describes these internal I/O functions. There are two on-board full-length Mini PCI Express slots . Many off-the-shelf Mini-

PCIe modules with versatile capabilities are available. By installing a Mini-PCIe module, your system can have expanded features such as Wi-Fi 3.5.1 DDR4 SO-DIMM Socket One Channel DDR4 SO-DIMM slot supports DDR4 2133 (Skylake) or DDR4 2400 (Kaby Lake), up to 32GB (ECC/Non-ECC) memory. 3.5.2 Mini PCI Express/mSATA Socket 1 Full-length Mini PCI Express Socket supports Mini-PCIe/mSATA mode select by BIOS setup, USB 2.0. SIM card slot supports +3.3V Power On/Off control by Enbik Application Program, and one Card Detection LED (WWAN, WLAN & WPAN) on the front panel. This slot allows your system to connect to the Internet through available telecom operators For WIF communications, the IoTEDGE3100M system provides multiple SMA antenna apertures on the left panel for multi-antenna configuration. 26 Top Side Bottom Side 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 PCIe_Wake#

Reserved Reserved PCIe_CLKREQ#

PCIe_REFCLK-

PCIe_REFCLK+

GND GND Reserved (UIM_C8) Reserved (UIM_C4) PCIe_PERn0/SATA-Tx+

PCIe_PERp0/SATA-TX-

GND GND GND Mechanical key 3.3V GND 1.5V UIM_PWR UIM_DATA UIM_CLK UIM_RESET UIM_VPP GND Reserved PCIe_RST#

+3.3V_SB GND

+1.5V SMB_CLK 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 27 Top Side PCIe_PETn0/SATA-RX-

PCIe_PETp0/SATA-RX+

Bottom Side 31 33 35 37 39 41 43 45 47 49 51 GND GND

+3.3V

+3.3V GND Reserved Reserved Reserved Reserved 32 34 36 38 40 42 44 46 48 50 52 SMB_DATA GND USB_D-

USB_D+

GND LED_WWAN#

LED_WLAN#

LED_WPAN#

+1.5V GND

+3.3V 28 3.5.3 Mini PCI Express Socket 2 Full-length Mini PCI Express Socket supports Full Length Mini-PCIe, USB 2.0. This slot allows your system to connect to the Internet through available telecom operators network. For WIF communication, the IoTEDGE3100M system provides multiple SMA antenna apertures on the left panel for multi-antenna configuration. Top Side Bottom Side 1 3 5 7 9 11 13 15 PCIe_Wake#

Reserved Reserved PCIe_CLKREQ#

GND GND PCIe_REFCLK-

PCIe_REFCLK+

3.3V GND 1.5V UIM_PWR UIM_DATA UIM_CLK UIM_RESET UIM_VPP 2 4 6 8 10 12 14 16 29 Top Side Bottom Side Mechanical key 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 Reserved (UIM_C8) Reserved (UIM_C4) GND PCIe_PERn0 PCIe_PERp0 PCIe_PETn0 PCIe_PETp0 GND GND GND GND

+3.3V

+3.3V GND Reserved Reserved Reserved Reserved GND Reserved PCIe_RST#

+3.3V_SB GND

+1.5V SMB_CLK SMB_DATA GND USB_D-

USB_D+

GND LED_WWAN#

LED_WLAN#

LED_WPAN#

+1.5V GND

+3.3V 3.5.4 M.2 Socket One M.2 M Key Slot supporting 2242 PCIe x1 or SATA, mode selection by BIOS setup. 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 30 Pin 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 67 69 71 73 Description Ground Ground

Ground

Ground

Ground

Ground

Ground

Ground PCIE RX N0 / SATA B+

PCIE RX P0 / SATA B-

Ground PCIE TX N0 / SATA A-

PCIE TX P0 / SATA A+

Ground PCIE Clock N PCIE Clock P Ground Ground

Ground Ground Mechanical Key Description VCC 3.3V VCC 3.3V

LED#

VCC 3.3V VCC 3.3V VCC 3.3V VCC 3.3V

DEVSLP

Reset#

Clock Request#

Wake#

Ground Ground Ground Pin 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 68 70 72 74 31 3.5.5 Internal SATA and SATA Power Connector One internal SATA and SATA power connector. The SATA Power Header supports +5V power at 2A for SSD devices. SATA Data Pinout SATA Power Pinout Pin Name Pin 1 2 3 4 5 6 7 Name GND GND A+

A-

B-

B+

GND Function Ground Transmit+

Transmit-

Ground Receive-

Receive+

Ground 1 2 3 4 5 6 7 8 9 12 13 14 15 Ground Ground Ground NC NC NC V5 V5 V5 NC NC NC 10 Ground 11 Reserved Ground 3.3V Power, Pre-charge, 2nd mate 5V Power, pre-charge, 2nd mate 12V Power, Pre-charge, 2nd mate Function N 3.3V Power 1st Mate 2nd Mate 3rd Mate 5V Power 5V Power 2nd Mate

1st Mate 12V Power 12V Power 32 3.5.6 Internal USB 2.0 Ports One internal USB 2.0 Type A connector. The internal USB port is designed to allow users to attach a protection dongle inside the chassis. Pin 1 2 3 4 Name VCC D-

D+

GND Description

+5 VDC Data -

Data +

Ground 33 Chapter 4 Hardware Installation This chapter describes how to install parts, including:

SO-DIMM Memory Installation M.2 SSD Installation MSATA SSD Installation Mini-PCIE 1 Module Installation Mini-PCIE 2 Module Installation 2.5 SATA HDD/SSD Installation Replace CMOS RTC Battery Mounting Bracket Installation 34 4.1 SO-DIMM Memory Installation SO-DIMM Memory Installation 1. Remove the bottom four M2.5*5mm screws to remove the bottom cover. 2. Open the bottom cover and unplug the cable connected to the board on the inside of the bottom cover. 3. Insert the SO-DIMM memory module into the SO-DIMM socket. 4. Confirm that the SO-DIMM is securely inserted into the socket. 5. Reconnect the cable to the board on the inside of the bottom cover. 6. Replace the bottom cover and secure with four M2.5*5mm screws. 35 3. Insert the SO-DIMM memory module into the SO-DIMM socket. 4. Confirm that the SO-DIMM is securely inserted into the socket. 5. Reconnect the cable to the board on the inside of the bottom cover. 6. Replace the bottom cover and secure with four M2.5*5mm screws. 4.2 M.2 SSD Installation 1. Remove the bottom four M2.5*5mm screws to remove the bottom cover. 2. Open the bottom cover and unplug the cable connected to the board on the inside of the bottom cover. 3. Remove the two M2.5*6mm screws securing the DIO module and remove the DIO module. 4. Insert the M.2 SSD module into the M.2 socket and secure with the M2*4mm screws. 5. Insert the DIO module and secure with two M2.5*6mm screws. 6. Reconnect the cable to the board on the inside of the bottom cover. 7. Replace the bottom cover and secure with four M2.5*5mm screws. 36 4.3 mSATA SSD Installation (mini-PCIe 1) 1. Remove the bottom four M2.5*5mm screws to remove the bottom cover. 2. Open the bottom cover and unplug the cable connected to the board on the inside of the bottom cover. 3. Remove the two M2.5*6mm screws securing the DIO module and remove the DIO module. 4. Remove the M2.5*8mm screw to securing the IOM-2RG module and remove the IOM-2RG module. 6. Insert the mSATA module into the mini-PCIe1 socket and secure with M2.5*6mm screw. 5. Remove the Plastic Pillars. 7. Install the Plastic Pillars. 8. Insert the IOM-2RG module and secure with M2.5*8mm screw. 9. Insert the DIO module and secure with two M2.5*6mm screws. 10. Reconnect the cable to the board on the inside of the bottom cover. 11. Replace the bottom cover and secure with four M2.5*5mm screws. 37 4.4 Mini-PCIe 1 Module Installation 1. Remove the bottom four M2.5*5mm screws to remove the bottom cover. 2. Open the bottom cover and unplug the cable connected to the board on the inside of the bottom cover. 3. Remove the two M2.5*6mm screws securing the DIO module and remove the DIO module. 4. Remove the M2.5*8mm screw to securing the IOM-2RG module and remove the IOM-2RG module. 5. Remove the Plastic Pillars. 6. Insert the mini-PCIe card module into the mini-PCIe1 socket and secure with M2.5*6mm screw. 7. Install the Plastic Pillars. 8. Insert the IOM-2RG module and secure with M2.5*8mm screw. 9. Insert the DIO module and secure with two M2.5*6mm screws. 10. Reconnect the cable to the board on the inside of the bottom cover. 11. Replace the bottom cover and secure with four M2.5*5mm screws. 38 4.5 Mini-PCIe 2 module installation 1. Remove the bottom four M2.5*5mm screws to remove the bottom cover. 2. Open the bottom cover and unplug the cable connected to the board on the inside of the bottom cover. 3. Remove the two M2.5*6mm screws securing the DIO module and remove the DIO module. 4. Insert the Mini-PCIe module into the Mini-PCIe Socket 2 and secure with M2.5*6mm screw. 5. Insert the DIO module and secure with two M2.5*6mm screws. 6. Reconnect the cable to the board on the inside of the bottom cover. 7. Replace the bottom cover and secure with four M2.5*5mm screws. 39 4.6 2.5 SATA HDD/SSD Installation 1. Remove the bottom four M2.5*5mm screws to remove the bottom cover. 2. Open the bottom cover and unplug the cable connected to the board on the inside of the bottom cover. 3. Remove the two M2.5*6mm screws securing the DIO module and remove the DIO module. 4. Remove the M2.5*8mm screw to securing the IOM-2RG module and remove the IOM-2RG module. 5. Remove the Plastic Pillars. 6. Remove the IOM-POEAT4 module. 7. Plug the SATA power cable into the SATA power wafer connector on the board. Then plug the SATA cable (without lock) into the SATA connector on the board. 8. Install the IOM-POEAT4 module and secure with M2.5*6mm screw. 9. Install the Plastic Pillars. 10. Insert the IOM-2RG module and secure with M2.5*8mm screw. 11. Install the 2.5 SATA disk drive to the bottom cover with 4 M3x4mm screws and insert the SATA cable (with lock) and SATA power cable into the 2.5 SATA disk drive. 40 4.7 Replace CMOS RTC Battery 1. Remove the two M2.5*8mm screws securing the rear panel battery cover. 2. Open the battery cover and pull out the white battery tray holder. 41 3. Remove the CR2032 button battery from the white battery tray holder and replace it with a new one.

Caution!

1. When changing the battery, make note of the polarity of the battery. 2. When the battery tray holder is inserted back into the battery slot, make sure that positive (+) is facing up. 4. Insert the battery tray holder into the battery holder and secure the rear panel battery cover with 2 M2.5 screws. 42 4.8 Mounting Bracket Installation 1. Secure 2 brackets to the bottom cover with 2 M2.5x5 screws. 43 Chapter 5 Function Settings This chapter includes:

Clear CMOS/ME Switch (SW1) 44 5.1 Clear CMOS/ME Switch (SW1) You can use Switch SW1 to clear CMOS and Intel Management Engine settings. Switch 1 Description (Clear CMOS) Switch 2 On Off On Off Clear

(Default) 1 Description (Clear ME) Clear

(Default) 45 Chapter 6 Function Settings This chapter includes:

Wifi module model 46 Wifi module model BCM943224HMPx P201 47 China Broadcom BCM943224HMP Wireless Mini Pcie 300Mbps Laptop Internal Stock Wifi module model Quick Details Place of Origin:

Brand Name:

Model Number:

Type:

Interface Type:

Transmission Rate:

Application:

Kind:

Products Status:

Application:

Support OS:

Condition:

Single package size:

Single gross weight:

Package Type:

Spare Part Number:

593837-001 Frequency Range:

Dual Band This item do not compatible with Hp and Lenovo Mac Hackintosh and Windows xp/win7/8/8.1/vista/Linux Original,Tested,Working 15X10X5 cm 0.2KG Carton Box 48 Wireless BCM943224HMP 593837-001 Dual Band 300M Mini Pcie Wifi Card Wifi module model Product Description Spare Part Number:

Manufacturer:

Model:

Interface:

Speed Up to:

Standard:

593837-001 Broadcom BCM943224HMP Mini pci-e 300Mbps IEEE802.11 b/g/n Suppot: Mac Hackintosh and Windows xp/win7/8/8.1/vista/Linux,DO NOT compatible with Hp and Lenovo. 49 Appendices This section includes:

Appendix A: DisplayPort MultiStream Transport (MST) Capabilities Appendix B: How To Use GPIO 51 Appendix A: DisplayPort Multi-Stream Transport (MST) Capabilities The IoTEDGE3100M system DisplayPorts support Multi-Stream Transport (MST). MST Max. Resolution Pixel Clock One Display Total Bandwidth for Bandwidth [Gbps]

all display [Gbps]

1 display 3840x2160 @60Hz 4096x2304 @60Hz 2 concurrent 2880x1800 @60Hz 533.25 605.0 337.75 16 18.5 10.13 16 18.15 20.26 Note 1.Multi-Stream Transport (MST) enables multiple monitors via a single DisplayPort* connector. 2.Total bandwidth for all displays must be lower than the Max theoretical bandwidth of 5.4x4 = 21.6 [Gbps]. 3. Additional cooling is required. 52 Appendix B: How to use GPIO Functional Description GPIO signals are accessed via a 2.54mm 2x10-pin terminal block, including lsolated DI 8 bit, DO 8 bit, DI Com, Power and GND. DI/DO supports NPN (Sink) and PNPO (Source) mode. DI mode is selected by external H/W connection. DO mode is selected by BIOS setting or Application Program. DI DO DI/DO Safety-Related Certifications:

2500-V PART NUMBER PACKAGE BODY SIZE

(NOM) RMS Isolation for 1 minute per UL 1577 Approved by VDE, DIN EN60747-5-2(_) (as an option), file No. 40009162 (as model No. PC3H4) UL flammability grade (94V-0) 2500-V PART NUMBER PACKAGE BODY SIZE

(NOM) RMS Isolation for 1 minute per UL 1577 4242-V ISO7131CC PK Isolation per DIN V VDE V 0884-10

(VDE V 0884-10):2006-12, 566 V ISO7140CC PK Working Voltage CSA Component Acceptance Notice 5A, IEC ISO7141CC 60950-1 and IEC 61010-1 End Equipment ISO7141FCC Standards CQC Certification per GB 4943.1-2011 DI/DO Operation Characteristics:

Parameter Operation Voltage DI 5 ~ 48V DC Input/Output Current Limit Turn On Delay Time (Max.) Turn Off Delay Time (Max.) 25 uS 25 uS 25 uS 53 DO Source Mode:5 ~ 48V DC Sink Mode: 5~40V DC 100mA Source Mode: 15 uS Sink Mode: 60uS Source Mode: 15 uS Sink Mode: 60uS Pin Define Pin 1 2 3 4 5 6 7 8 9 10 Description Isolated DI bit0 Isolated DI bit1 Isolated DI bit2 Isolated DI bit3 Isolated DI bit4 Isolated DI bit5 Isolated DI bit6 Isolated DI bit7 Digital Input COM Isolated GND Pin 11 12 13 14 15 16 17 18 19 20 Description Isolated DO bit0 Isolated DO bit1 Isolated DO bit2 Isolated DO bit3 Isolated DO bit4 Isolated DO bit5 Isolated DO bit6 Isolated DO bit7 Isolated GND Isolated VCC Isolation Digital Input Connection Method Digital Input Sink Mode Connection Method Pin 9 digital input COM pin connection to V+. Input pin (Pins 1-8) control by V-. DC 5-48V 54 Digital Input Source Mode Connection Method Pin 9 digital input COM pin connection to V-. Input pin (Pins 1-8) control by V+. DC 5-48V Isolation Digital Output Connection Method Digital Output Sink Mode Connection Method Digital Input Sink Mode Internal Circurt Current input to system, Control Low status Pin No. 11-18 Digital Output Source Mode Connection Method Digital Input Source Mode Internal Circurt Current Ouput to device, Control High state DI VCC Pin No. 11-18 55 DC 5-40V DC 5-48V 20C

GITIS (Shenyang)Software Co., Ltd Agent Authorization IoTEDGE3200L, IoTEDGE3200H, IoTEDGE3200M, Company: GITIS (Shenyang)Software Co., Ltd Address: The 2nd floor Jinlang Vanke Center Xinlong Street No.1-26, Hunnan New District, Shenyang,Liaoning Province, China Product Name: IoT Edge Gateway Model Number(s): IoTEDGE3100M, IoTEDGE3100H, IoTEDGE3100L, IoTEDGE3100P, IoTEDGE3100S, IoTEDGE3200P, IoTEDGE3300M Product Description: IoT Edge Gateway We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Li Hui Title:

Manager Company:

GITIS (Shenyang)Software Co.,Ltd Date: Apr. 30, 2020

GITIS (Shenyang)Software Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Apr. 30, 2020 Subject; Request for Confidentiality FCC ID: 2AWB3IOTEDGE3100M To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Li Hui Title: Manager

Model Difference Declaration To Whom It May Concern, We, GITIS (Shenyang)Software Co., Ltd(IoT Edge Gateway) Trademark:N/A; Model Number: IoTEDGE3100M, IoTEDGE3100H, IoTEDGE3100L, IoTEDGE3100P, IoTEDGE3100S, IoTEDGE3200M, IoTEDGE3200H, IoTEDGE3200L, IoTEDGE3200P, IoTEDGE3300M

; All models the function, software and electric circuit are the same, only with a product color and model named different for commercial purpose. Test sample model: IoTEDGE3100M . Please contact me if you have any question. Name: Li Hui Title: Manager Signature of applicant:

Date: Apr. 30, 2020