FCC ID: 2AFIW-MIFIC4-EXT 4G Smart Router

Lets get started. SETTING UP Insert Cards & Power On When powered up, your MiFi router will broadcast Wi-Fi signal with the SSID:

GL-MIFI-xxx. Hot plug for TF card and MicroSIM card are not supported for this router. Connect via Wi-Fi Connect to the Wi-Fi called GL-MIFI-xxx, and input the default Wi-Fi password goodlife, which is also printed on the bottom of the router. TF Card / Micro SD Card (Optional) Micro SIM Card

(Optional;

Corner cut facing outside) After Inserting cards, turn on the router by pressing the power button Connect via LAN or GL-MIFI-xxx Search the SSID and connect to it Default password is goodlife Plug the cable connecting to your computer into LAN port Set up Router Visit http://192.168.8.1 in your browser to set up your router; start by choosing your preferred language. Product name MIFI (MIFI user manual)

(Color PANTONE) :

(Size) 105*140 C10 M0 Y0 K70 C62 M0 Y87 K0 Print

(Double / Color) Material 200g (200g coated paper) Remarks

/ 5mm

(Last updated): 2022/08/24 SUPPORT WARRANTY 3G/4G Power Wi-Fi LAN WAN Battery Reset button Power port WAN Ethernet port LAN Ethernet port TF card slot SIM card slot USB2.0 port Power button Repair / Reset If you cannot access the web-based setup page or cannot connect to the router, you can press the Reset button:

Press and hold for 3 seconds, and then release to repair your network. Press and hold for 10 seconds, and then release to reset the router to factory settings. All user data will be cleared. https://docs.gl-inet.com/en/3/

Technical Supports For more detailed and updated instructions, please visit our website docs.gl-inet.com For further questions, you can get help from the following ways:

- Email to support@gl-inet.com

- Message us on our Facebook: facebook.com/gl.inet.wifi/

- Post questions in our forum: forum.gl-inet.com

- Ask professionals in other forums e.g. OpenWrt, LEDE or other professional websites We provide one year limited warranty for routers and 3-month limited warranty for accessories. Extra warranty may apply according to the local law in which the product purchase took place. Highly recommend using the included 5V/2A power adapter. Any damage to the router caused by not following the instructions will render this warranty null and void. Any damage to the router caused by modifying the PCBA, components or case will render this warranty null and void. Issues caused by the use of third-party firmware may not get official support from us. Any damage to the router caused by inappropriate use, e.g. inappropriate voltage input, high temperature, dropping in the water or on the ground will render this warranty null and void. Pictures on the instructions are only for reference. We reserve the right to change or modify these materials without further notice. FCC ID: 2AFIW-MIFIC4-EXT FCC Radiation Exposure Statement:

This device meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. The SAR limit of USA (FCC) is 1.6 W/kg averaged. Device types:

4G Smart Router (FCC ID: 2AFIW-MIFIC4-EXT) has also been tested against this SAR limit. SAR information on this and other pad can be viewed online at http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search. This device was tested simulation typical 10mm to body. To maintain compliance with FCC RF exposure requirements, use accessories should maintain a separation distance between the user's bodies mentioned above, use accessories should not contain metallic components in its assembly, the use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. The Equipment named above is confirmed to comply with the requirements setout in the European Council Directive on the Approximation of the Laws of the Member States relating to RED (2014/53/EU). The equipment passed the test which was performed according to the following European standards:

EN 301 489-1 V2.2.3 (2019-11); EN 301 489-17 V3.2.3 (2020-07);

EN 301 489-52 V1.1.0 (2016-11) EN 55032:2015; EN 55035:2017; EN 300 328 V2.2.2 (2019-07);

EN 301 908-1 V13.1.1 (2019-11); EN 301 908-2 V13.1.1 (2020-06);

EN 301 908-13 V13.1.1 (2019-11); EN 62311:2020 EN62368-1:2014+A11:2017 This product uses WiFi 2.4GHz Operating Frequency is 2400~2483.5MHz;

The Product comply with Directive 2011/65/EU and its amendment directive 2015/863/EU (Rohs2.0) Hong Kong Ofce GL Technologies (Hong Kong) Limited Unit 203, 2/F, Building 19W, 19 Science Park West Avenue, Hong Kong Science Park, Pak Shek Kok, N.T., Hong Kong Shenzhen Ofce Shenzhen Guanglianzhitong Tech Co., Ltd. Room 305 - 306, Skyworth Digital Building, Shiyan Street, Baoan District, Shenzhen, China, 518000

( +86-0755-86606126 ) ver. 20220824 Product name MIFI (MIFI warranty card)

(Color PANTONE) :

(Size) 94*140 C10 M0 Y0 K70 C62 M0 Y87 K0 Print

(Double / Color) Material 200g (200g coated paper) Remarks

/ 5mm

(Last updated): 2022/08/24

Reference No.: WTH22X08161493W001/002/003 Page 1 of 18 ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the devices expected lifetime. Proposed Label Location on EUT FCC ID Label Location Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn

GL Technologies (Hong Kong) Limited FLAT/RM 203 2/F BUILDING, 19W 19 SCIENCE PARK WEST AVENUE SHATIN NT, Shatin, Hong Kong Date:

2022-08-24 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AFIW-MIFIC4-EXT Confidentiality Request To whom it may concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. Block Diagram Operational Description Schematics Parts List Tune-Up Information Security Information Software Defined Radio (SDR) Information The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Internal Photos Test Setup Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. or For 180 days pursuant to KDB 726920 D01. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, GL Technologies (Hong Kong) Limited

Alfie Zhao/Manager

GL Technologies (Hong Kong) Limited FLAT/RM 203 2/F BUILDING, 19W 19 SCIENCE PARK WEST AVENUE SHATIN NT, Shatin, Hong Kong Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2022-08-24 SUBJECT: FCC Application for FCC ID: 2AFIW-MIFIC4-EXT To Whom It May Concern:

I, the undersigned, hereby states this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, and will apply the Supplier's Declaration of Conformity procedure to the class B computer peripheral portion and receivers that operate in the range between 30 and 960 MHz of this composite device. I understand the following FCC requirements:

1. Devices subject to the SDoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm (Select the

"accredited" option to search for FCC recognized accredited test firms.) 2. Pt 2.1077 contains the list of information that must be included in the Supplier's Declaration of Conformity, which must be supplied with each product sold. The SDoC compliance info shall be included in the Users Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States. According to 2.909(b), the responsible party is either the Manufacturer or if the product is imported the Importer. Regards, GL Technologies (Hong Kong) Limited

(Alfie Zhao)

(Manager)

GL Technologies (Hong Kong) Limited FLAT/RM 203 2/F BUILDING, 19W 19 SCIENCE PARK WEST AVENUE SHATIN NT, Shatin, Hong Kong

(FCC ID2AFIW-MIFIC4-EXT) POWER OF ATTORNEY DATE: 2022-08-24 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern:

We, the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, GL Technologies (Hong Kong) Limited are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, GL Technologies (Hong Kong) Limited

(Alfie Zhao)

(Manager)