FCC ID: 2AFIW-X3000NR 5G NR Wi-Fi 6 Router

Lets get started. SETTING UP Insert Cards & Power On When powered up, your router will broadcast both 2.4G and 5G Wi-Fi signal with the SSID:

GL-X3000-xxx and GL-X3000-xxx-5G. Hot plug for TF card and Nano-SIM card are not supported for this router. Nano-SIM Card TF Card After inserting cards, plug in power cable Connect via Wi-Fi Connect via LAN Connect to the Wi-Fi called GL-X3000-xxx or GL-X3000-xxx-5G, and then input the default Wi-Fi password which is printed on the bottom label of the router. or Search the SSID and connect to it Plug the cable connecting to your computer into LAN port Spitz AX 5G NR Wi-Fi 6 Router (GL-X3000NR) 4G LTE Wi-Fi 6 Router (GL-X3000C16) Set Up Router Visit https://192.168.8.1 in your browser to set up your router; start by choosing your preferred language. SUPPORT 4G/5G Antennas Wi-Fi Antennas 4G/5G Antennas Power port WAN Ethernet port USB 2.0 port LAN Ethernet port e ll u l a r C Cellular 5G Wi-Fi 2G Wi-Fi Internet Lights:

Power Nano-SIM Card Slots Repair / Reset TF Card Slot If you cannot access the web-based setup page or cannot connect to the router, you can press the Reset button:

Press and hold for 3 seconds, and then release to repair your network. Press and hold for 10 seconds, and then release to reset the router to factory settings. All user data will be cleared. https://docs.gl-inet.com/en/4/

Technical Supports For more detailed and updated instructions, please visit our website docs.gl-inet.com For further questions, you can get help from the following ways:

- Email to support@gl-inet.com

- Message us on our Facebook: facebook.com/gl.inet.wifi/

- Post questions in our forum: forum.gl-inet.com

- Ask professionals in other forums e.g. OpenWrt, LEDE or other professional websites WARRANTY We provide one year limited warranty for routers and 3-month limited warranty for accessories. Extra warranty may apply according to the local law in which the product purchase took place. Highly recommend using the included 12V/2.5A power adapter. Any damage to the router caused by not following the instructions will render this warranty null and void. Any damage to the router caused by modifying the PCBA, components or case will render this warranty null and void. Issues caused by the use of third-party firmware may not get official support from us. Any damage to the router caused by inappropriate use, e.g. inappropriate voltage input, high temperature, dropping in the water or on the ground will render this warranty null and void. Pictures on the instructions are only for reference. We reserve the right to change or modify these materials without further notice. FCC ID: 2AFIW-X3000NR | 2AFIW-X3000C16 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 3. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help important announcement. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Cet quipement est conforme aux limites d'exposition aux radiations IC CNR-102 tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. The user manual for LE-LAN devices shall contain instructions related to the restrictions mentioned in the above sections, namely that:

i. the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

i. le dispositif utilis dans la bande 5150-5250 MHz est rserv une utilisation en intrieur afin de rduire le risque de brouillage prjudiciable aux systmes mobiles par satellite dans le mme canal;

ii. for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;

iii. for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate;

ii. pour les dispositifs antenne (s) dtachable (s), le gain d'antenne maximal autoris pour les dispositifs dans les bandes 5250-5350 MHz et 5470-5725 MHz doit tre tel que l'quipement soit toujours conforme la norme e.i.r.p. limite;

iii. pour les dispositifs antenne (s) dtachable (s), le gain d'antenne maximal autoris pour les dispositifs de la bande 5725-5850 MHz doit tre tel que l'quipement soit toujours conforme la norme e.i.r.p. les limites, le cas chant;

The functions of Wireless Access Systems including Radio Local Area Networks(WAS/RLANs) within the band 5150-5350 MHz for this device are restricted to indoor use only within all European Union countries. AT BE BG HR CY CZ DK EE LV LI LT LU MT NO PL PT RO SK SI FI FR DE EL HU IS IE IT ES SE CH NL UK(NI) UK Hereby, GL TECHNOLOGIES (HONG KONG) LIMITED declares that the radio equipment type [5G NR Wi-Fi 6 Router, GL-X3000NR / 4G LTE Wi-Fi 6 Router, GL-X3000C16] is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address: https://www.gl-inet.com/products/certificate Frequency bands: 2.4G WIFI: 2.412-2.472GHz; 5G WIFI: 5.15-5.25GHz 5.25-5.35GHz 5.47-5.725GHz 5.725-5.85GHz Maximum output power: 2.4G WiFi 19.77dBm; 5G WiFi 21.46dBm Power supply: ICP30A-120-2500, For applicable power supplies see user instructions Hong Kong Office GL Technologies (Hong Kong) Limited Unit 203, 2/F, Building 19W, 19 Science Park West Avenue, Hong Kong Science Park, Pak Shek Kok, N.T., Hong Kong Shenzhen Office Shenzhen Guanglianzhitong Tech Co., Ltd. Room 305 - 306, Skyworth Digital Building, Shiyan Street, Baoan District, Shenzhen, China, 518000

( +86-0755-86606126 ) ver. 20230519

Datasheet - GL-X3000 (ver.20221230) Datasheet (GL-X3000) Meet Spitz AX Wi-Fi 6 Cellular Router GL-X3000 is a Wi-Fi 6 4G/5G Cellular Router designed to offer internet speed of 574Mbps

(2.4GHz) and 2402Mbps (5GHz), with a combined maximum Wi-Fi speed of 3000Mbps. It is designed for high-speed internet usage with a failover cellular connection, or for scenarios with-

out a reliable source of internet, including recreational vehicles traveling in remote locations, or public transport within high interference city limits. GL-X3000 is equipped with six SMA external antennas, with an optional antenna selection between 4G LTE, 5G NR, Wi-Fi, and GPS. Highlights 5G NR Connectivity GL-X3000 supports 5G New Radio cellular connectivity, offering 20 times faster potential download speed in comparison to 4G LTE, at less than 5ms latency. 5Gs Massive Machine-Type Communications technology for supporting high network density connections also reduces delay or interruption due to interference. 5G 4G Copyright 2022 GL Technologies (Hong Kong) Limited. All rights reserved. 1 Datasheet - GL-X3000 SD-WAN as a Service GL-X3000 provides a simple SD-WAN (Software-defined WAN) solution using our device management platform - GoodCloud S2S (Site-to-Site), enabling high network performance and efficiency while maintain-

ing the same level of security, elasticity, and automation. High-speed VPN GL-X3000 is pre-installed with OpenVPN and WireGuard supporting 30+ VPN services, it can run OpenVPN at 150 Mbps and WireGuard at 300 Mbps. WireGuard OpenVPN Max. 150Mbps Max. 300Mbps Secured Network GL-X3000 runs on WPA3 security protocol, it supports VPN remote access to client devices using Good-

Cloud. The network runs on the latest version of Internet Protocol IPv6, and it also supports Cloudflare DNS over TLS security protocol, ensuring a secure network. Copyright 2022 GL Technologies (Hong Kong) Limited. All rights reserved. 2 Datasheet - GL-X3000 Specifications HARDWARE CPU MediaTek Dual-core MT7981A, @1.3GHz Memory / Storage DDR4 512 MB / 8GB eMMC Wi-Fi 802.11 b/g/n/ax, 574Mbps (2.4GHz) 802.11 a/n/ac/ax, 2402Mbps (5GHz) External Antennas 6 x Optional Antennas (4G LTE / 5G NR / Wi-Fi / GPS) External Speed 10/100/1000/2500 Mbps Exterior Material ABS + PC Dimension 155 x 95 x 31mm SOFTWARE FEATURES Operating System OpenWrt Network mode Routing, AP, Wireless Bridge, Wired Bridge Ethernet Dialing Mode DHCP, Static, PPPoE Repeater Mode 4G/5G Modem Scans and connects to SSID Connects to hidden SSID Sets AT command Automatic / Manual setting Receives SMS Display signal strength GPS View current and historical location data Copyright 2022 GL Technologies (Hong Kong) Limited. All rights reserved. 3 Datasheet - GL-X3000 Wireless Configuration Switching on and off wireless AP Modifying and hiding SSID Modifying encryption mode and password Channel modification Bandwidth modification Modifying transmission power Guest SSID Display product model, name, IP addreess, MAC address Display Flow Statistics

(Cloud Platform Required) Current rate Flow statistics QoS settings Client List Show current connected clients Disable a client (no internet access) Firewall Function Port forwarding, open port, DMZ VPN System Function OpenVPN client & server WireGuard client & server Maximum OpenVPN Speed: 150Mbps Maximum WireGuard Speed: 300Mbps Policy routing Restart Restore factory settings Change IP address range on LAN side Change time zone MAC address clone Encrypted DNS DDNS Cloud remote management Remote web management Remote SSH management Installing / uninstalling packages Drop-in Gateway mode Multi-WAN Copyright 2022 GL Technologies (Hong Kong) Limited. All rights reserved. 4 Datasheet - GL-X3000 INTERFACE Ethernet Port TF Card Slot 1 x 2.5G WAN, 1 x 1G LAN TF card, maximum 1TB SIM Card Slot 2 x Nano SIM card (12.3mm x 8.8mm) USB2.0 Type-A System / Internet / 2.4G WiFi 5G WiFi / Signal Strength Press (>3s, <8s) restores network settings to device initial state Long press (>=8s) restores factory settings DC, 12/24V FCC CE RoHs USB Port LED Indicator Reset Button Power Port CERTIFICATION ENVIRONMENT Operating Temperature 0 ~ 40C (32 ~ 104F) Storage Temperature

-20 ~ 70C (-4 ~ 158F) Operating Humidity 5%~95%, non-condensing Storage Humidity 5%~95%, non-condensing Copyright 2022 GL Technologies (Hong Kong) Limited. All rights reserved. 5 Datasheet - GL-X3000 PACKAGE LIST 4G LTE 5G NR 1 x GL-X3000 Router 1 x Power Adapter 2 x Wi-Fi Antennas 4 x 4G LTE Antennas 1 x GPS Antenna (Optional) 1 x Ethernet Cable 1 x User Manual 1 x Warranty Card 1 x GL-X3000 Router 1 x Power Adapter 2 x Wi-Fi Antennas 4 x 5G NR Antennas 1 x Ethernet Cable 1 x User Manual 1 x Warranty Card CONTACT US GL TECHNOLOGIES (HONG KONG) LIMITED Unit 203, 2/F, Building 19W, 19 Science Park West Avenue, Hong Kong Science Park, Pak Shek Kok, N.T., Hong Kong WEBSITE www.gl-inet.com E-MAIL sales@gl-inet.com Copyright 2022 GL Technologies (Hong Kong) Limited. All rights reserved. 6

60mm MAC: E4:95:6E:FF:FF:FF Router SIN: 20dofigir8t92odf Model: GL-X3000NR Device ID: cl01000 192.168.8.1 Contains FCC ID: XMR2022RM520NGL GL-X3000-001 IG: 10224A-022RM520NGL MADEIN CHINA 20mm SX XXXXK eipameme 2 CE RE RK T

(0 98000000000000000000000 0 0000 00000 QO0DDG0A0000NONNO00000 O00QMPO00000000 00000000000 OOUTDOOA00O0N0000000000

() I00000d00000000000 J 1

S Ss S Ss

S Ss a

(7 Aof0.000000000000000000000 Contains

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name GL Technologies (Hong Kong) Limited Address Grantee Code FCC ID Unit 601, Building 5W, Hong Kong Science Park, Shatin, N.T., Hong Kong 2AFIW 2AFIW-X3000NR Authorized Contact Name Alfie Zhao Contact Email Contact Phone alzhao@gl-inet.com

(+852) 60962240 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

a) b) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, c) d) e) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) g) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List

[Insert applicant name] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules.

[Insert applicant name] (the applicant) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to 1.50002, as an entity producing covered equipment. Applicant Signature:

Date: 2023-04-25 Print Name: Alfie Zhao Title:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database General Manager QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021

GL Technologies (Hong Kong) Limited TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding:

Confidentiality Request regarding application for FCC ID: 2AFIW-X3000NR LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions Software Security Description The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Alfie Zhao Title: General Manager Signature:

On behalf of Company: GL Technologies (Hong Kong) Limited Telephone: (+852) 60962240 E-mail: alzhao@gl-inet.com

GL Technologies (Hong Kong) Limited Date: 2023-04-25 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AFIW-X3000NR To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) and Keny Xu in SGS-

CSTC Standards Technical Services Co., Ltd. (SGS) to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own.. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with GL Technologies (Hong Kong) Limited. This authorization is valid until further written notice from the applicant. Print Name: Alfie Zhao Title: General Manager Signature:

On behalf of Company: GL Technologies (Hong Kong) Limited Telephone: (+852) 60962240 E-mail: alzhao@gl-inet.com

UNITED STATES DESIGNATED AGENT LETTER Date: 2023-4-25 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant Company Name: GL Technologies (Hong U.S. designated agent Company Name: GL Intelligence, Inc. Grantee Code:

Contact Name:

Address:

Kong) Limited 2AFIW Alfie Zhao Unit 601, Building 5W, Hong Kong Science Park, Shatin, N.T., City/Province/Zip: Hong Kong Telephone:

(+852) 60962240 FRN:

Contact Name:

Address:

0033649344 Alfie Zhao 651 N. Broad Street, Suite 206 Middletown, DE 19709 City/Province/Zip: Middletown Delaware Telephone:

760813-6789 Email:

alzhao@gl-inet.com Email:

certification@gl-inet.com Applicable Equipment: FCC ID: 2AFIW-X3000NR ATTN: Director of Certification:

We, GL Technologies (Hong Kong) Limited and GL Intelligence, Inc. understand and acknowledge the applicants consent and the designated agents obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-

mail of the designated agent listed above. We, GL Technologies (Hong Kong) Limited and GL Intelligence, Inc. acknowledge the applicants acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed): Alfie Zhao Name (Printed): Alfie Zhao Title: General Manager Title: General Manager Signature:

Signature: