FCC ID: 2AFIW-AXT1800 AXT1800 Wireless Router

Lets get started. SETTING UP Insert Cards & Power On When powered up, your router will broadcast both 2.4G and 5G Wi-Fi signal with the SSID:

GL-AXT1800-xxx and GL-AXT1800-xxx-5G. Hot plug for MicroSD card is not supported for this router. TF Card or MicroSD Card (Optional) After Inserting card, plug in power cable Connect via Wi-Fi Connect via LAN Connect to the Wi-Fi called GL-AXT1800-xxx or GL-AXT1800-xxx-5G, and then input the default Wi-Fi password which is printed on the bottom label of the router. Search the SSID and connect to it Plug the cable connecting to your computer into LAN port GL-AXT1800 / Slate AX AXT1800 Wireless Router Set Up Router Visit http://192.168.8.1 in your browser to set up your router; start by choosing your preferred language. SUPPORT Light

(Solid white light means the router is working well) Power port USB3.0 port LAN Ethernet ports WAN Ethernet port MicroSD Card

(Optional) Mode button Reset button Repair / Reset If you cannot access the web-based setup page or cannot connect to the router, you can press the Reset button:

Press and hold for 3 seconds and then release to repair your network. The light will turn blue and flash slowly until your network recovers. Press and hold for 10 seconds, and then release to reset the router to factory settings. The light will turn blue and flash rapidly. All data will be cleared when the light becomes solid blue. https://docs.gl-inet.com/en/4/

Technical Supports For more detailed and updated instructions, please visit our website docs.gl-inet.com For further questions, you can get help from the following ways:

- Email to support@gl-inet.com

- Message us on our Facebook: facebook.com/gl.inet.wifi/

- Post questions in our forum: forum.gl-inet.com

- Ask professionals in other forums e.g. OpenWrt, LEDE or other professional websites WARRANTY We provide one year limited warranty for routers and 3-month limited warranty for accessories. Extra warranty may apply according to the local law in which the product purchase took place. Highly recommend using the included 5V/4A power adapter. Any damage to the router caused by not following the instructions will render this warranty null and void. Any damage to the router caused by modifying the PCBA, components or case will render this warranty null and void. Issues caused by the use of third-party firmware may not get official support from us. Any damage to the router caused by inappropriate use, e.g. inappropriate voltage input, high temperature, dropping in the water or on the ground will render this warranty null and void. Pictures on the instructions are only for reference. We reserve the right to change or modify these materials without further notice. FCC ID: 2AFIW-AXT1800 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 3. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help important announcement. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Cet quipement est conforme aux limites d'exposition aux radiations IC CNR-102 tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. The user manual for LE-LAN devices shall contain instructions related to the restrictions mentioned in the above sections, namely that:

i. the device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

i. le dispositif utilis dans la bande 5150-5250 MHz est rserv une utilisation en intrieur afin de rduire le risque de brouillage prjudiciable aux systmes mobiles par satellite dans le mme canal;

The functions of Wireless Access Systems including Radio Local Area Networks(WAS/RLANs) within the band 5150-5350 MHz for this device are restricted to indoor use only within all European Union countries. AT BE BG HR CY CZ DK EE LV LI LT LU MT NO PL PT RO SK SI FI FR DE EL HU IS IE IT ES SE CH NL UK(NI) Hereby, GL TECHNOLOGIES (HONG KONG) LIMITED declares that the radio equipment type [AXT1800 Wireless Router, GL-AXT1800] is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address: https://www.gl-inet.com/products/certificate 2.4G Wi-Fi2412MHz-2472MHz, 2422MHz-2462MHz; 5G Wi-Fi: U-NII-1:5180-5240MHz, 5190-5230MHz, 5210MHz; U-NII-2A: 5260-5320MHz, 5270-5310MHz, 5290MHz; U-NII-2C: 5500-5700MHz, , 5510-5670MHz, 5530-5610MHz; 5.8G Wi-Fi: 5745MHz-5825MHz,5755-5795MHz,5775MHz Max Output Power:

2.4G Wi-Fi19.18dBm; 5G Wi-Fi: 29.71 dBm; 5.8G Wi-Fi: 13.67 dBm Hong Kong Office GL Technologies (Hong Kong) Limited Unit 203, 2/F, Building 19W, 19 Science Park West Avenue, Hong Kong Science Park, Pak Shek Kok, N.T., Hong Kong Shenzhen Office Shenzhen Guanglianzhitong Tech Co., Ltd. Room 305 - 306, Skyworth Digital Building, Shiyan Street, Baoan District, Shenzhen, China, 518000

( +86-0755-86606126 ) ver. 20220526

WIFI:S:GL-AX1800-84a;T:WPA;P:Sx78EXih97;MAC:79:D1:87:EB:79:1D 74.5mm AXT1800 Wireless Router GL-AXT1800 Model:

FCC ID:

IC:

2AFIW-AXT1800 23019-AXT1800 IP:

SSID:

Key:

Input:

MAC:

S/N:

Device ID:

192.168.8.1 GL-AXT1800-001 0000000001 5V 4A E4:95:6E:40:00:00 20doflgir8t92odf cl01000 15.5mm XXX-XXXXX Use Indoor only for W52

GL Technologies (Hong Kong) Limited We, GL Technologies (Hong Kong) Limited declare that this EUT (FCC ID:

2AFIW-AXT1800) doesnt have ad Hoc Mode function on US/Canada frequencies. In addition, the frequency selection feature is disabled by firmware for devices marketed to the US/ Canada. For DTS part of this device, only channels 1-11 will be used in North America. Country code selection is disabled. Should you have any questions or comments regarding this matter, Please have my best attention. Sincerely yours, Print Name: Alfie Zhao Signature:

On behalf of Company: GL Technologies (Hong Kong) Limited Telephone: (+852) 60962240 E-mail: alzhao@gl-inet.com Title: General Manager

GL Technologies (Hong Kong) Limited Date: April 7, 2022 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AFIW-AXT1800 To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch and Kobe Jian in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own.. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with GL Technologies (Hong Kong) Limited. This authorization is valid until further written notice from the applicant. Title: General Manager Print Name: Alfie Zhao Signature:

Telephone: (+852) 60962240 E-mail: alzhao@gl-inet.com On behalf of Company: GL Technologies (Hong Kong) Limited

a) b) c) d) e) f) g) SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name GL Technologies (Hong Kong) Limited FLAT/RM 203 2/F BUILDING 19W 19 SCIENCE PARK WEST AVENUE SHATIN NT Hong Kong Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name Alfie Zhao 2AFIW 2AFIW-AXT1800 alzhao@gl-inet.com

(+852) 60962240 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

Date:

April 7, 2022 Print Name: Alfie Zhao Title:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database General Manager Applicant Declaration Rev:0.0

GL Technologies (Hong Kong) Limited TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Confidentiality Request regarding application for FCC ID: 2AFIW-AXT1800 Regarding:

LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions Software Security Description The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 0 days from the grant date, whichever is less. If the device is marketed within 0 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Alfie Zhao Signature:

On behalf of Company: GL Technologies (Hong Kong) Limited Telephone: (+852) 60962240 E-mail: alzhao@gl-inet.com Title: General Manager