Bluetooth Class1 Dongle Specification Preliminary GST class 2 Bluetooth Dongle GL2BDG92 Rev.01 Product Name Product ID Hardware Version FEATURE
Comply with Bluetooth Specification V1.1
Support Bluetooth Class2
Built-in Link controller and Link Manager Protocol
HCI interface over USB
USB interface fits desktop/laptop PCs
Compliant with USB 1.1 standard.
Built-in flash memorysystem clock .
Easy to use-makes wireless networking simple.
Easy to follow-friendly user interface provides an easy way to connect other Bluetooth devices . NotebookPCs APPLICATIONS:
FCC Notices This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation . FCC RF Exposure requirements:
This device and its antenna(s) must not be co-located or operation in conjunction With any other antenna or transmitter. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. 1 Hardware Specification ITEMS Standard Interface Link Mode Data Rate Frequency Band Compatible OS Bluetooth Profile support Receiving Signal Range Operation current Operating Distance Output Interface Operation Temperature Storage Temperature Operation Humidity Storage Temperature Modulation USB Specification Spectrum Security Provided Dimension SPECIFICATION Bluetooth V 1.1 USB(Type A) ACL,SCO ACL:723.2kbps/SCO:57.6kbps 2.4GHz Microsoft Windows 98 / 2000 / ME / XP GAP, SPP, FTP, DUN, LAP, OPP, GOEP, SYNC, FAX, PAN, HCRP, Audio/Headset. Better than -75dBm @ 0.1%FER 155mA(max) Up to 10 meters USB
-0 oC ~ +55oC
-20 oC ~ +70oC 0% to 70%
0% to 95% Non-condensing GFSK(Gaussian Frequency Shift Keying) Ver 1.1 FHSS(Frequency Hopping Spread Spectrum) Pairing,Encryption,Authentication 59.57mm x 19.83mm x 13.86 2 GL2BDG92 Block Diagram Pin Description (Wire to Board connector) 1 + 5V 2 D-
3 D+
4 GND Pin Name
+5V USB_D-
USB_D+
GND NO 1 2 3 4 Description I/O
Asynchronous serial data RTS/USB Data+
I O Asynchronous serial data RTS/USB Data-
Ground Vcc 3