S14100100010 2.2 Product Specification Bluetooth Specification Bluetooth v1.2 Class2 3. Prepare to use the product 3.1 Power Supply and Charging 1. Before you use this device, please make sure that you 1.1 Fully charge the device at least 3 hours before you use it the first time. Afterward it takes approximate 2 hours to fully recharge power. (Please refer to 3.1 showed below for details.) 1.2 To pair the speakers with a Bluetooth mobile handset or other Bluetooth devices before you making calls. The Bluetooth audio connection between the speakers and your phone can be established by setting up a paired link. (Please refer to 3.2 showed below for details.) 2. Introduction 2.1 Features a. Multipoint Technology Dual connecting capability, easily press one button to seamlessly switch between two Bluetooth mobile phones or mobile phone and VoIP. b. Voice announcing for Incoming Callers number. c. Stereo streaming your favorite MP3 tracks stored on your cellphones wirelessly to the speakers. d. Auto Swap between music operations and calls handling as soon as calls have been made. e. Abnormal disconnection notifications. f. Comfortable ergonomic formation can be clipped or pendent. g. Super lightweight and ultra small as only 10g, cutting edge design easy to carry and storage. h. 3.5mm audio jack allows users to use own earphones. Bluetooth Profiles Frequency Band Working Distance Standby Time Playing Time Battery Weight Packing Contents 2.3 Product Outlook HSP / HFP / A2DP / AVRCP 2.4GHz~2.4835GHz ISM Band 10 meters 120 hours 4~7 hours 3.7V Li-Polymer rechargeable battery 10g 1. Bluetooth Stereo Pendant 2. 100-240V DC adapter 3. 3.5mm earpiece 4. One User manual LINE OUT JACK
(3.5mm) MIC VOL (+) / FORWARD HANG UP/ PICK UP POWER ON/OFF VOL (-) / BACKWARD 8 Pin MINI USB JACK (5V) a. As soon as power jack have been connected, the device charging can be progressed under ON or OFF circumstance. b. The battery must be charged with the appropriate charger, one DC5V adapter has been enclosed in the package. c. While charging, the amber indicator will stay on and the amber indicator will be off as soon as it is completed. It takes you 2 hours to re-charge every time. (It takes 3 hours to fully charge power at the very first time) 3.2 Power On / Power Off a. Power On: Press and hold the button for approximately 2 seconds under power off status until you see the indicators start and flashing three times. b. Power Off: Press and hold the button for approximately 6 seconds under standby until you see the Blue and Amber indicators bright at the same time and distinguished. 3.3 Pairing and establish a connection Please make sure you have paired the product with Bluetooth AV sources before you start to use. Kindly following the pairing procedure shows hereunder:
a. Turn your Bluetooth stereo headphone on by press and hold button till indication blinks rapidly. At this moment, the the product is in the pairing mode. b. To activate Bluetooth devices searching from your Bluetooth AV sources by follow their original instruction. Please choose the device name and enter the pass key1234to establish a pairing connection. c. The speaker supports two audio connections. Please select HEADSET/HANDSFREE profile if you like to connect to the mobile phone. Or A2DP/AVRCP profile for stereo sound effect to your audio sourcing. connecting with a Bluetooth AV Transmitter;
mute function. button will act as 5. Operation Button and Symbol Definition Feature Buttons Operation Conditions 3.6 Activate or close the Callers ID announcement feature a. This Bluetooth Stereo Headset supports Callers ID announcement feature, press and hold the button more than 10 seconds during power off status, users can switch between announcement or no announcement features. 3.7 Multipoint Technology : This Bluetooth Stereo Headset supports Multipoint Technology, please refer to the 5.2 Function Matrix for the operation guide. 3.8 Pin code:1234 4. Indications: Amber(A), Blue(B) Pairing
(B) Blink rapidly During Communication
(B) Rapidly blink 3 times per second Playing Music
(B) Rapidly blink 2 times per second Connected and Standby Standby without Connected Low Battery Charging
(B) Blink tardily once per second
(B) Blink rapidly once every 2 second
(A) continuing blinking, the lower the faster
(A) light on 5.1 Buttons:
a. Short Click: +: Clip and release less than 1 second b. Long Press: ++: Press and release for 2 seconds c. Double Click: v v: Click twice within 0.5 second d. Press and Hold: +++: Press and hold the key for more than 6 seconds e. Ultra Press: ++++: Press and hold the key for more than 10 seconds 5.2 Function Matrix Feature Buttons Operation Conditions Power On Pairing Power Off Pick Up Hang Up Pick Up Line 2 and put Line 1 on hold Reject Line 2 call Swap between phone calls Callers' Number Announcement Enabled / Disabled
**Reject incoming call
VV
Power Off Power Off Power On Incoming Call Activate Call Line 1 in Use Line 1 in Use Line 1 & 2 both in use
Power Off
Incoming Call
**Voice dial
**Cancel voice dial
**last number redial
**Call Transfer Volume Up Volume Down Play Pause Stop Backward Forward
VV
VV
Standby or Idel Voice Dialing Standby or Idel Activate Call (*1) During Calling /
Music Playing During Calling /
Music Playing Stop / Pause Music Playing Music Playing Music Playing Music Playing The above functions which are remarked with ** can act on only if the cellphone supports HFP. Note (*1): The above functionalities may vary depending on the model of mobile handsets. Ex. Some mobile handsets may disconnect after call transfer. 6. Certification and Safety Approvals/General Information 6.1 The device is CE:FCC and BQB approved. 6.2 Federal Communication Commission(FCC) Statement:
a. Rule15.21:You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. b. Rule15.105(b):This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to part 15 of the FCC rules. Note: If the pairing can not be established within 60 seconds, the blue indicator turns to regular blinking once every 2 second automatically. A re-pairing procedure is needed. Please repeat pairing procedure listed above. 3.4 Bluetooth Cellphone Operation a. Check your mobile phones user guide, find out the paragraphs of Bluetooth Connectivity and follow the instruction to complete pairing with the speaker. b. If your cellphone support only Hands Free profile, please activate connection from the cellphone. (Please refer to your mobile phones manual for operation details) c. Cellphone will always be the top priority, since an incoming/
outgoing has been progressed, it interrupts actively and the on-
going music will be muted. As soon as the call has been hangs up, the music rebound afterward. 3.5 Audio Streaming via other Bluetooth audio sources a. NB / PC (Bluetooth USB dongle) a.1 Play music: Please complete AV pairing and then activate intended audio player interface afterward, the music will be transmitted to the headset automatically. a.2 Conversation: Please complete HSP pairing and then you can start to use the conversation functions, such as Skype. Note: The Bluetooth USB Dongle should support AVRCP profile to activate remote control function. b. Bluetooth AV Transmitter: Please make sure the Bluetooth Stereo Headset has been connected with the transmitter
(blue indicator will be blinked rapidly 2 times per second). The music will be transmitted from audio player to Bluetooth stereo headset via Bluetooth AV Transmitter automatically. Note: The device did not support remote control function when These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. 6.3 European Union Directives Conformance Statement We, Global Target enterprise declares that this product:
Bluetooth portable speaker with hands free function (CK817) is conformity with the appropriate standards EN300328, EN301489-1, EN301489-17, EN60950.In accordance with the council directive 1999/5/EC. For more information, please visit: http://www.globaltarget.com.tw 6.4 Bluetooth is a trade mark owned by Bluetooth SIG, Inc. 7. Caution 7.1 Important information regarding safe and efficient operation. Read this information before using the product. Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 7.2 Operation is subject to the following two conditions:
a. this device may not cause harmful interference, and b. this device must accept any interference received, including interference that may cause undesired operation of the device. 7.3 FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operation instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operation in conjunction with any other antenna or transmitter.