RC-01 Basic Features 1 Ver1.0 1. Bluetooth Transmission 2. Lithium Power Supply 3. 10 Buttons Specification 1. Appearance And Parameters Operating Voltage 3.7V ~ 4.2V Operating Current Working: less than 10mA; standby: less than 10uA Operating Frequency 2402 ~ 2480MHz Transmission Mode Bluetooth 4.0 BLE Sensor Buttons None 10 Buttons Remote control distance 10 meters Battery Standby Power Compatibility Material Exterior Color Size Weight Charging Voltage Charge Current USB 400mAh 3.7V Lithium Polymer Standbyless than 20uA Compatible With Bluetooth 2.03.04.05.0 Plastic Customized 120mm*40mm*16.5mm About 39g 5V 200MA Micro USB Low-voltage Alarm 3.3V Indicator Light A red light, a blue light ON/OFF Switch One Dormant current16~20uA Working current1.0~1.5mA 2. Operational Instruction 1 Bluetooth pairing Turn on the ON/OFF switch, press the POWER button and the OK button for 3 seconds at the same time. When the blue LED flashes quickly, it begins to pair. At this time, the host starts the search scan and makes a connection, and the blue LED stops blinking and stays on.,the pairing is successful. After connecting, press the POWER button to turn off. 2 LED indicator Red light Low voltage (3.3V): the red LED flashes. Charging: the red LED is on. Fully charged: the red LED is off. Blue lightWireless statusFast flashing when pairing, always bright after successful connection 3 Dormant time a) Unpaired state: no operation in 30 seconds;
b) Search state: no operation in 150 seconds;
c) Connection state: no operation in 1800 seconds. 4 Activation When Bluetooth is in dormancy in connection state, pressing any key to activate the Bluetooth, and the activation time is about 100-200 milliseconds. 2 Ver1.0 3. Button function description Front and side Button Function Power Volume up Volume down Menu Up arrow Left arrow Right arrow Down arrow Enter Usage Page(hex) Usage ID(hex) 0C 0C 07 07 07 07 07 07 0C E9 EA 65 52 50 4F 51 28 224 Remarks Power button;
Pairing button Sound+
Sound-
Menu Up Left Right Down Entershort press Return AC_Back FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 3 Ver1.0 Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. 4 Ver1.0