Mix--
Matl: 157g Size:W:80 H:160 MM JoveTrans Mix User Manual Product List 02 /Pair 04 /In-ear Detection When the earphones are activated, open the storage case, the indicator on the left earphone starts to flash, search with the phone's Bluetooth and connect to "JoveTrans Mix". Take of both earphones to pause music playing. Put on either one to resume music playing. Put on the earphone to answer a call automatically. earphones
(1 pair) storage case JoveTrans Mix 05 /Key on the Earphones earplugs 3 pairs charging cable 1 piece 01 /Activate the Earphones When using for the first time, keep the earphones in the case, press and hold the function key (the key with a microphone logo) for 3 seconds. When the green indicator on the case is function key If you changed the phone, put the two earones into the storage case, close the case, press and hold the function key on the case for 8 seconds until the green indicator on the case is on, then open the case, when the indicator on the left earphone starts to flashe, the earphones are in pairing mode. 03 /Translation After the Bluetooth connection is successful, open the JoveTrans APP, choose the languages. Take out the left earphone, keep the right one in the case, which is now a translation stick. Put on the left earphone and speak, hand the translation stick to the other speaker, who should hold the function key (the key with a microphone logo) and speak. Music Play/Pause Single click Next Answer Double click Single click Phone Call Reject Press and hold for 1 second End a call Single click 06 /Power on and off Open the case and the earphones will turn on automatically Put the earphones back to the case, close the case and the earphones will turn off. Scan the QR code or search in App Store to download JoveTrans App Translation is only supported by Android 6.0/iOS 8.0 and above. 07 /Charging Earphones will be charged upon being put into the case. Status of charging indicator on the case. fully charged (green) chargingred Please charge the case if the indicator stays red when opening or closing the case. FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC ID: 2AUTCJT-MX001-L FCC ID: 2AUTCJT-MX001-R 217-190004 217-190005