Motorcycle/ Vehicle Tracker Quick Start Guide (GSM/DCS/WCDMA) CONTENT 1.Introduction .......................................................................................... 2 1.1 Introduction ....................................................................................... 2 1.2 Features ............................................................................................ 2 1.3 Hardware specification ........................................................................ 3 1.4 Appearance ........................................................................................ 4 1.5 LED indicator ...................................................................................... 4 1.6 Cable description ................................................................................ 5 1.7 Accessories ........................................................................................ 6 1.7.1 Standard Items ................................................................................ 6 1.7.2 Optional Items ................................................................................. 7 2.Operation .............................................................................................. 8 2.1 Install the SIM card ............................................................................. 8 2.2 Connect the Main Cable ...................................................................... 9 2.3 Connect the Main Power ...................................................................... 9 2.4 Switch on/off Tracker .........................................................................10 2.5 Fix the device ....................................................................................10 3.Installation............................................................................................11 3.1 Installing the Emergency button .........................................................11 3.2 Connecting ignition detection line on car .............................................12 3.3 Connecting Relay ...............................................................................13 3.4 Installation reminder ..........................................................................14 1. Introduction 1.1 Introduction The tracker is designed as a durable and multi-functional 3G GPS tracker. It integrates highly sensitive GPS module and 3G communication module with a powerful microcontroller that fits into a compact enclosure. The device is capable of being waterproof and ideal for use in a motorcycle, golf carts and vehicles. It provides real-time GPS positions anytime and anywhere with an open view to the sky, and offers precise positioning, and reports vehicle status to the server with necessary information shown on the map. Benefits such as enhanced fleet management, improved vehicle safety, emergency response, are all accomplished through the implementation of the tracker system. Also built-in 3G and GPS antennas are for easy installation without hassle. 1.2 Features AGPS support Support communication protocols- SMS/TCP/UDP. Multiple I/Os support: 1 Digital Input for custom function, 1 Digital input for optional Emergency button, 1 Analog Input for fuel sensor, 1 Digital Output for Relay, 1 Digital Input for ACC detection. Firmware update via Over-The-Air Alert functions including Power low/ Over speed/ Movement alarms Tracking by preferred interval, scheduling and Geo-fence Multiple power solution IPX7 design 1.3 Hardware specification Item Model Description US Europe Global Back-up Battery Li-Polymer 820mAh Temperature Operation Storage
-30C ~ + 60C
(0C ~ + 45C for charging)
-40C to +60 C Dimension 107.5 mm X 38.7 mm X 23.5 mm GPS Receiver high performance GPS chipset Communication GPS Antenna GSM Antenna Protocol Power Built-in Memory GSM/GPRS/EDGE:
850/1900MHz UMTS/HSPA+:
850/1900MHz GSM/GPRS/EDGE:
900/1800MHz UMTS/HSPA+:
900/2100MHz GSM/GPRS/EDGE:
850/900/1800/1900MHz UMTS/HSPA+:
800/850/900/1900/
2100MHz Built-in patch ceramics antenna Built-in Monopole Antenna SMS/GPRS (TCP/UDP) 9V~36V 32 Mb Emergency Input Negative trigger x 1 Ignition (ACC) Input Positive trigger x 1 Digital Input Port Negative trigger x 1 Digital Output Port Negative trigger x 1 (300mA) Fuel sensor Input Port Analog Input x 1( 0~28V), 12 bits resolution Sensor Humidity Weight Motion sensor 5% to 95% Non-Condensing 66.5g 1.4 Appearance 1 4 1.6 Cable description 1.7 Accessories 1.7.1 Standard Items 1.7.2 Optional Items 01 02 03 3 3 3 3 2 Analog Input
(Blue) SOS
(Green) Ground
(Black) Out Input
(White) 4 Input Negative
(Yellow) Main Power
(Red) Ground
(Black) Ignition Detection Input
(Orange) 1 2 3 4 LED Reset button For fixing device with Velcro tape Screws of back cover 1.5 LED indicator LED status Description Red blinking Device is being boot but SIM card isnt ready Red solid SIM card is ready, but not register to network Yellow solid Green solid Registered to network, but not connected to server Registered to network, and connected to server Hiding mode: Device would blink red light while it is booting up. After completing the boot, the LED would go off. Wire Color Description Green Blue Yellow Red Black White Orange Black SOS (Negative Trigger) Fuel sensor input (Analog Input, 0~28 V, 12 bits resolution) Digital Input (Negative Trigger) Main Power, 9~36 V Ground Digital Output (Negative Trigger), 300 mA Ignition Detection Input (Positive Trigger) Ground Main Unit Hardwire cable External Emergency Button 12V/24V Relay Main Cable Velcro Tape X2 OBDII Power Cable Configuration Cables 04 05 06 07 2 Operation For first time users, please follow the steps below to complete the pre-installation. 2.1 Install the SIM card 2.2 Connect the Main Cable 2.4 Turn on Tracker After connecting the power, please press the reset button to turn on the device. 3 Installation 3.1 Installing the Emergency button There is a line of cable for connecting a push button for emergency help. Unscrew the cover of device. Insert SIM card with the copper contacts face-down and the notch on the SIM card at the left side of the SIM slot. Note: Make sure to disable the SIM PIN entry function on the SIM card before inserting your SIM card After installing the SIM card, please screw the back cover.. M1.7- #00 Please pay attention to hand-tighten the fool-proof connector of the cable with tracker. 2.3 Connect the Main Power Analog Input
(Blue) SOS
(Green) Ground
(Black) Out Input
(White) Input Negative
(Yellow) Main Power
(Red) Ground
(Black) Ignition Detection Input
(Orange) Connect the red wire from the cable to a power source of 9V~36 V. Connect the black wire to ground. 2.5 Fix the device You could fix the device with the Velcro tape as the picture above. You could tear down the cover of double side tape and stick to the installation position. There is a magnet behind the double side tape. You could install the device to a metal surface. The magnet on the device would attract the metal surface. Analog Input
(Blue) SOS
(Green) Ground
(Black) Out Input
(White) Input Negative
(Yellow) Main Power
(Red) Ground
(Black) Ignition Detection Input
(Orange) One end of the button must be connected to the SOS line and the other end must be connected to the ground line. SOS line
(red wire) Ground line
(Black wire) 08 09 10 11 3.2 Connecting ignition detection line on Vehicle 3.3 Connecting Relay For Vehicle:
The device could be placed or installed on the marked position as the pictures below. Glove compartment For Motorcycle:
For motorcycle rider, the device could be installed at the marked position as the picture as below. Analog Input
(Blue) SOS
(Green) Ground
(Black) Out Input
(White) Input Negative
(Yellow) Main Power
(Red) Ground
(Black) Ignition Detection Input
(Orange) Car Battery
+
To Car Battery+
Relay Yellow Cable Cut off Ignition Power Connect with Really Relay Red Tracker 87 87a 30 85 86 White
(Current limit 300mA) Relay Black Cable Lock Off ACC Relay Blue Cable lgnition(ON) Relay Yellow Cable Off ACC Lock Ignition On Connect the orange wire from the cable to ACC position of vehicle. Connect the black wire to ground. Connect the white wire from devices cable to the yellow wire of relay. For the other connections, please refer to the diagram above. 3.4 Installation reminder WARNING:
In a confined space of the car, there is a big different temperature between inside and outside of the car. In addition, it is also considerable temperature difference between tracker's interior and exterior. Therefore, if you put a tracker in the car, please make sure to place it with good ventilation. Under dashboard
(OBD2 connector) Back of front seat If youd like to install to the OBDII connector of vehicles, please connect device with the OBDII power cable firstly, then you could connect the OBDII power cable to the OBDII connector of vehicle as the picture below. 12 13 14 13 14 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. Notice:
Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. The antenna(s) used for this transmitter must not be co-located of operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC RF Radiation Exposure Statement 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
/
N3PM2GTR388000 N3PM2GTR388001 15 15