FCC ID: 2AQUQGE50333 Wi-Fi Smart Outdoor Power Adapter 50333

50333_W_C

Designer: RP

Docket:01-022-21

PANTONE

0C

PANTONE

0C

PANTONE

0C

PANTONE

0C

100K

w (width): 140mm

h (height): 180 mm

h

w

LIMITED WARRANTY: This plug is warranted to last 1 year from the date of purchase. If it fails before that time, we will replace it.

See caution text for proper use. This warranty is void if this product is misused in any way. This replacement is the sole remedy

available and liability for incidental or consequential damage is expressly excluded.

CAUTION: For use only in 120 V/ 60 Hz circuits. Risk of electrical shock. Grounding continuity must be maintained. Do not open;

no user-serviceable parts inside. This device is intended for indoor and outdoor use. Do not use where directly exposed to water.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not

cause harmful interference; and (2) this device must accept any interference received, including interference that may cause

undesired operation. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to

operate the equipment.

WARNING: Outlet must be mounted in a vertical position with outlets facing downward and be at least 55” (1.4 m) above ground

level. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the

separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

GARANTIE LIMITÉE : Cette fiche est garantie pour une durée de 1 an à compter de la date d’achat. En cas de défaillance durant la

période de garantie, nous la remplacerons. Lisez attentivement la notice de mise en garde avant d’utiliser la fiche. Cette garantie

sera nulle et sans effet en cas d’usage inadéquat. Le remplacement est le seul et unique recours offert et toute responsabilité pour

dommages accessoires ou consécutifs est expressément exclue.

MISE EN GARDE : Convient uniquement aux circuits de 120 V/ 60 Hz. Risque de choc électrique. La continuité de la mise à la

terre doit être maintenue. Ne l'ouvrez pas; ne renferme pas de pièces dont l’entretien peut être assuré par l’utilisateur. Ce

dispositif est conçu pour usage à l’intérieur et à l’extérieur. Ne l'utilisez pas dans un endroit où il y a risque d’exposition directe à

l’eau.

Ce dispositif est conforme aux dispositions de la section 15 des règles de la FCC. Son utilisation est assujettie aux deux conditions

suivantes : (1) le dispositif ne doit pas occasionner de brouillage préjudiciable et (2) l’utilisateur du dispositif doit être disposé à

accepter tout brouillage reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. Toute

modification n’ayant pas été expressément approuvée par le fabricant pourrait annuler le droit de l’utilisateur de faire fonctionner

ce dispositif.

ATTENTION : La prise doit être montée en position verticale avec les sorties orientées vers le bas et être à au moins 55 po (1,4 m)

au-dessus du sol. Tout changement ou toute modification n'ayant pas été expressément approuvé par le fabricant pourrait

annuler l'autorisation accordée à l'utilisateur de faire fonctionner l'équipement. REMARQUE : Ce dispositif a été testé et déclaré

conforme aux limites applicables à un appareil numérique de classe B. en vertu de la Partie 15 des règles de la FCC. Ces limites

sont conçues pour fournir une protection raisonnable contre le brouillage préjudiciable dans une installation résidentielle. Ce

dispositif génère, fait usage et peut émettre de l'énergie en radiofréquence et, s'il n'est pas installé et utilisé conformément aux

directives fournies, peut être à la source de brouillage préjudiciable pour les communications radio. Toutefois. Il n'y a pas de

garantie à l'effet qu'il n'y aura pas d'Interférence dans une installation donnée. Si le dispositif occasionne un brouillage

préjudiciable à la réception radiophonique ou télévisuelle, ce qui peut être déterminé en le fermant puis en l'ouvrant, l'utilisateur

est invité à tenter d'éliminer l'interférence au moyen de l'une ou de plusieurs des mesures suivantes : réorienter ou déplacer

l'antenne réceptrice, accroître la distance entre le dispositif et le récepteur, brancher le dispositif dans une prise appartenant à un

circuit différent de celui auquel le récepteur est connecté ou consulter le marchand ou un technicien expérimenté en radio/TV

pour obtenir de l'aide.

RF EXPOSURE

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be

installed and operated with minimum distance of 8" (20 cm) between the radiator and your body.

USER MANUAL NOTICE FOR LICENSE-EXEMPT RADIO APPARATUS

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1)

this device may not cause interference; and (2) this device must accept any interference, including interference that may cause

undesired operation of the device. CAN ICES-3 (B).

RADIATION EXPOSURE STATEMENT:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be

installed and operated with minimum distance 8" (20 cm) between the radiator and your body.

EXPOSITION AUX RF :

Cet équipement est conforme aux limites d'exposition aux rayonnements FCC établies pour un environnement non contrôlé. Cet

équipement doit être installé et utilisé avec un minimum de 8 po (20 cm) de distance entre la source de rayonnement et votre corps.

NOTICE D'UTILISATION DE MATÉRIEL RADIO EXEMPT DE LICENCE

Le présent appareil est conforme aux CNR d’industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est

autorisée aux deux conditions suivantes: 1) I’appareil ne doit pas produire de brouillage; et 2) I’appareil doit accepter le brouillage

radioélectrique subi même si le brouillage est susceptible d’en compromettre le fonctionnement. CAN NMB-3 (B).

DÉCLARATION D'EXPOSITION AUX RADIATIONS :

Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet

équipement doit être installé et utilisé avec un minimum de 8 po (20 cm) de distance entre la source de rayonnement et votre corps.

FCC RESPONSIBLE PARTY

PARTIE RESPONSABLE FCC

Globe Electric / Globe Électrique

15301 Shoemaker Ave

Norwalk, CA 90650

www.globe-electric.com

152-2518-6 - 50333 01-022-21

MODELIMODELE:50333 RAINTIGHTIETANCHE FOCID:24QUQGE50G33 IC: 6290A-GE50333 l CAN ICES-3(8)NMB-3(6) RossivelRsisif 125V~80H2 158,

(Max. 1875W, 8A, Max,1000W Tungsten/Tungstne Intertek CONFORMS TOICONF ORME A ULSTD ar 4007799 Minne Otstmatierariednsretzpetenntn cae Sesser ae round kek Avertissement: Ce disposi dot te installs Made in China!

en position verticale avec les prises orientes vers le bas et Fabriqu en Chine re stub au moins 14m ($5 po) ausessus d sl,

Globe Electric Company Inc. Agent Authorization Company: Globe Electric Company Inc. Address: 150, Oneida, Montreal, Quebec, Canada, H9R 1A8 Product Name: Wi-Fi Smart Outdoor Power Adapter Model Number(s): 50333 Product Description: Wi-Fi Smart Outdoor Power Adapter 50333 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2021/11/12 Name:

Celine Zhu Title:

Senior Project Manager Company: Globe Electric Company Inc.

Globe Electric Company Inc. November 29, 2021 Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Ref: FCC Class II Permissive change for FCC ID: 2AQUQGE50333 Applicant: Globe Electric Company Inc. Dear Examiner, This is to request a Class II Permissive change for FCC ID: 2AQUQGE50333 originally granted on 02/25/2021 (date). The change under this application is to Due to market demand 1. The package of inductance L3 from SMD/CD54 change to DIP/0810 2. The package of electrolytic capacitor E3E4 from SMD/5*5.4 change to DIP/5*11 3. Position moved of the chip capacitor C13 and chip resistor R6R8R9 4. Direction changed of the chip resistor R5R7 Component changes diagram Old New 50333_FCC Class II PC request letter Rev1.1 Globe Electric Company Inc. Circuit modification diagram TOP layer circuit Note: Changes to the circuit on the left side of the black marking New Old BOTTOM circuit Note: The circuit modification on the right side of the black marking line New Old The above non-RF component changes will not affect any RF performance, I attest that the certified device will not be capable of ad-hoc mode operation outside of the grant conditions. Sincerely, Name: Celine Zhu Date: 2021/09/29 Title: Senior Project Manager Signature of applicant 50333_FCC Class II PC request letter Rev1.1

Globe Electric Company Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2021.11.12 Subject; Request for Confidentiality FCC ID: 2AQUQGE50333 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Celine Zhu Title: Senior Project Manager

Globe Electric Company Inc. Agent Authorization Company: Globe Electric Company Inc. Address: 150, Oneida, Montreal, Quebec, Canada, H9R 1A8 Product Name: Wi-Fi Smart Outdoor Power Adapter Model Number(s): 50333 Product Description: Wi-Fi Smart Outdoor Power Adapter 50333 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: 2020/12/29 Signature:

Name:

Celine Zhu Title:

Senior Project Manager Company: Globe Electric Company Inc.

Globe Electric Company Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2020.12.29 Subject; Request for Confidentiality FCC ID: 2AQUQGE50333 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Celine Zhu Title: Senior Project Manager