FCC ID: 2ADKQ-VN8C VisionNova

Thank you for choosing VisionNOVA VN8-C video babycall. Please read this manual before use and keep it in a safe place for future reference. 1. 2. 3. 4. 5. 6. Open the battery compartment and insert the battery in both units. The battery are keyed and will only fit if oriented correctly. On order to make them fit, orient the metal parts of the battery against the battery springs in the unit. Plug in the adapters and charge the batteries until fully charged. The power LED will flash orange during charging and light constant orange when fully charged. If the units are powered on, the power LED will light constant orange during charging and revert to normal when fully charged. Switch on both units by push and hold the power button for 2 seconds. The power LED will start flashing during the start up sequence. The start up sequence might take several minutes, especially the first time and after a factory reset. This might take up to 10 minutes, BE PATIENT!

If you are asked for language, time zone and date/time, please provide this information. Dont select network at this time, select skip and wait for the units to pair. If you are asked about VN8-C to be device administrator, please select activate!

When the units are connected, you will see the picture in from the camera. Tap 2 times on the screen to enter/leave the control mode. In control mode you will have a zoom bar on the left and menu buttons on the right side of the screen. On the top of the screen is the status line that shows status of the system + temperature indication of the cameras surroundings. The system can also be connected to your home router for longer range, use of smart devices and more efficient use of multiple cameras. This can be done by entering settings, push the globe icon and select Wi-Fi and you will get a list of available networks. Select the network you will use and fill in the key if asked for it. Both the handset and the camera should now switch to this network. In order to add more cameras to the system, the camera need to be un-paired when searching it up, otherwise it will ask for a confirmation code that is only shown on already paired devices. If it is paired, you have to do a factory reset: Wait for the camera to start up and then press the power button until you hear a long beep. The camera then reboots and is ready for pairing. To switch off the units:

Camera: Press power button for aprox. 4 seconds. The power LED starts to flash and the camera powers off. Handset: Press the power button for some seconds and select Power off from the menu that pops up. FCC statement:

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. FCC ID: ADKQ-VN8C This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1 This device may not cause harmful interference, and

(2 This device must accept any interference received, including interference that may cause undesired operation. Manufacture address: Ljabruveien 39, PO. Box 90 Nordstrand, N-1112 Oslo, Norway

30x40mm 30mm 40mm GLOBEINTLModel:VN8C FCCID:2ADKQVN8C Input:DC5V/2A AssembledinPRC www.novababy.com

RF_160, Issue 03 Declaration of Authorization We Name: GLOBE INTERNATIONAL AS Address: Ljabruveien 39, PO. Box 90 Nordstrand, N-1112 City: OSLO Country: Norway Declare that:

Name Representative of agent: 406365 Agent Company name: EMTEK (SHENZHEN) CO., LTD. Address: Bldg 69,Majialong Industry Zone,Nanshan District City: Shenzhen Country: China is authorized to apply for Certification of the following product(s):

Product description: VisionNova Type designation: VN8-C Trademark: iPNova FCC ID: 2ADKQ-VN8C on our behalf. Date: December 4, 2015 City: OSLO Name: JAN OLAV BILET Function: Manager Signature:

Notes:

(1): Required for FCC application

(2): For FCC it must be the Grantee Code owner or the authorized agent.

ResponsetoInquirytoFCC(TrackingNumber587740) 2016-10-0504:06 FCCHome|Search|RSS|Updates|E-Filing|Initiatives|Consumers|FindPeople oetech@fcc.gov

oetech@fcc.gov<oetech@fcc.gov>

<joe.xia@emtek.com.cn>

2016105()04:06

9KB OfficeofEngineeringandTechnology Inquiryon09/19/2016:

Inquiry:

DearSIR Lookforwardtoyourreply!

Thanksverymuch!

FCCresponseon10/04/2016 AttachmentDetails:

Testreport1 testreport2 Wehaveaproductiswirelesscamera,Ithavewififunctionwithadipoleantenna.thesar testisrequirement,sowetestitlikeaUSBdongle,maintestdipoleantenna,theattached havethetestreport,pleasehelptoconfirmthetestreportisok Wedonothaveinformationregardingtheoperationanduseconditionsforthiscamera. However,youhaveSARtestedthedipoleantennawithaconservativetestdistanceof 0mm(directcontact)totheSARphantom.ThereforewearesatisfiedthatRF exposurehasbeenadequatelyaddressed.TheTCBcandetermineifthereareany discrepanciesintheactualtestreportitself. Donotreplytothismessage.PleaseselecttheReplytoanInquiryResponselinkfromtheOETInquiry Systemtoaddanyadditionalinformationpertainingtothisinquiry.

GLOBE INTERNATIONAL AS WIFI Channel 12 & 13 Declaration Letter To whom it may concern:

We have declared below featured for FCC equipment authorization in regard to 802.11b/g/n channel 12 &

13 operating capability for FCC ID: 2ADKQ-VN8C Please check Product hardware does not have the capability to operate on channel 12 & 13 Product hardware has the capability to operate on channel 12 & 13. However , these 2 channels will be disabled via software and user will not able to enable these 2 channels Product hardware has the capability to operate on channel 12 & 13. And meeting KDB 594280 D01 requirement. Pls explain detail here. Others Pls explain detail here. Signature Data: 2015-12-04 JAN OLAV BILET/manager E-mail:

Phone:

Fax:

Address irene@babyminder.com.hk 47 2338 2500 47 2338 2500 Ljabruveien 39, PO. Box 90 Nordstrand, N-1112 Solo, OSLO, Norway

FCC, Request for non-disclosure Date: 19-Oct-10 RF_501, Issue 7 Page 1 of 1 Company Name: GLOBE INTERNATIONAL AS Address: Ljabruveien 39, PO. Box 90 Nordstrand, N-1112 , City: OSLO Country: Norway To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: 2ADKQ-VN8C Reference number: ###44##+

Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:

C1 Bill(s) of Material XX] Block Diagrams KX] Operational Description Schematic Diagrams (1 Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (note 1):

(J Internal Photos [1] Users Manual CO Test Set-up Photos 1 External Photos Justification:

Planned Release Date STC: (notes 2,3, 4,5). If no date is given, 45 days from grant date will be used. Date: December 4, 2015 Name and signature of applicant: JAN OLAV BILET/manager Notes:

1) A document or type of document can only have ONE type of confidentiality!

2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 ax.)!

3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!

5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period