FCC ID: 2AACS-ALU210 Commercial Kiosk Tablet

Android Advertising Displayer ALU100/150/210 User Manual Please read this instruction before This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the device and receiver.

--Connect the device into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment FCC Radiation Exposure Statement The antennas used for this transmitter must be installed to provide a separation dista nce of at least 20 cm from all persons and must not be co-located for operating in conjunction with any other antenna or transmitter. Importation Safety Instructions Read this user manual All safety and operating instructions in this user manual should be read before operating the product Keep this user manual This user manual should be retained for future references. Head Warnings Be cautious about warning signals on the product. Follow Instructions Please follow instructions in this user manual Attachments To avoid danger, please do not use attachments not recommended by the product manufacturer. Mounting Do not place the product on any unstable cart, stand, tripod or table to avoid injury on children and adult. Please only use attachments indicated by product manufacturer. Temperature Please use this product within operating temperature 32F ~ 100F (0C ~ 45C), relative humidity 20%-80%. The product should be situated away from any heat source such as radiators, heat registers, stoves or other products (including amplifier) to product heat. Avoid Liquid Invasion Avoid the invasion of any liquid. Avoid placing it near bathtub, sink, kitchen, wet basement or swimming pool. Do not place product on any uneven surfaces and keep a distance of at least 6 inches from wall. Do not place heavy objects on top of the unit and at sealed areas to avoid heat ventilation problems. Product Protection Please do not place any attachment or parts inside the product to avoid contacts with voltage points that could result an electric shock or fire. Heat Ventilation There is no heat ventilation on the upper and lower part of the product, therefore to avoid overheating, please do not block any ventilation openings with objects (e.g. carpet). Please allow the opening to have 10cm distance for ventilation. Grounding or Polarization This product could be equipped with an alternate plug. Power Cord Protection Power supply cords should be routed so that they are unlikely to be walked on or pitched by items placed upon them. Pay attention to the connection of plugs. Power Sources This product should be operated only from the typeof power source indicated on the rear panel. If you are unsure of the type of power supply to your home, consult your product purchaser or local power company. Lighting and storms Unplug the outlet during lighting, storms or long unused periods. This will prevent damages and power-line surges to the product. Overloading Do not overload wall outlets, extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock. Damage Handling Unplug this product from the outlet of wall and request qualified service personnel under the following conditions:

when the power supply cord or plug is damaged when the picture display gets dimmer when liquid has been spilled or objects have fallen on to the product when the product has been exposed to rain or water. Adjust only those controls that are in the instruction manual. For improper adjustments may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. When the product exhibits a distinct change in performance-this indicates a need for repair service. Replacement parts When replacement parts are required, be sure that the technician uses replacement parts specified by the manufacturer or parts with same features. Unauthorized substitution may result in fire, electric shock or other hazards. Safety Check Upon completion of any service or repair to this product, ensure technician for proper operating condition performs safety checks. Warnings If the battery of remote control is incorrectly replaced, there will be a danger of explosion. Storage Keep the product at dim areas, room temperature and low humidity to maintain original condition. This will avoid danger. Transportation Since the product consists of glass and delicate electronic components, excessive shock or drop will result damages. Please handle the product carefully to minimize shock during transportation. Recycling The product utilizes tin-lead solder, and has a fluorescent lamp containing a small amount of mercury. For environmental considerations, disposal of these materials may be regulated in your community. For disposal or recycling information, please contact your local authorities, or Electronics Industries Alliance: http://www.eiae.org/

Cleaning Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use damp cloth for cleaning. Spec. & Package Package included:

-Please confirm all the items is included before the setup start. Model Sizes Resolution (pixles) Brightness Aspect Ratio CPU RAM Operating System Hardware Support Speaker Memory Support 1280x800 450 cd/m2 ALU100 2Wx2 16:10 15 10 16:9 ALU150 1920x1080 250 cd/m2 4 GB DDR4 Android 12 Quad-core Cortex-A55 up to 2.0GHz 1TOPS NPU Earphone, RJ45, Wi-Fi,BT, TYPE-C,USB 5Wx2 TF Card ALU210 21 1920x1080 250 cd/m2 16:9 Introduction of Android 1. Start up and shut down To start your device, insert the AC plug of the adapter into the AC socket, and the DC plug into the DC socket of the ALU tablet. The device can be powered on. To turn off the device, unplug the adapter's AC plug from the AC socket. 2. The App Drawer right top corner Press in the bottom of the screen from down to up to open the App Drawer. The Apps tab displays all applications that are available on the tablet. To place a app shortcut on the desktop, touch and hold the icon until the App Drawer fades and the desktop appears. Move your finger to the location where you want to place the icon and release your touch to place the icon. When using apps or other parts of the operating system you often will see the Extra Options icon. Pressing this icon will open a secondary menu with more options. Functions like opening an advanced setting menu, switching to a different account or refreshing the displayed information are often Hidden behind this icon. 3. Navigation icons bottom of the screen On the bottom side you will find icons: Use the navigation icons Home Or Return to close the App Drawer and return to your desktop. The Recent Activity icon Click on the small displayed preview to open that application. will show an interview of the active and recently opened applications. Click on the volume up/down icon to quickly adjust the size of media sound. General Operation 1. Installation of Applications You can install your own Apps by opening the Apps shop. This button can be found in the screen. Note that not all applications may function properly for your tablet. Some are made especially for small screen devices such as phones. You can also install your own Apps by opening the File Manager with TF card. You can find the File Manager in the App drawertoo. And please follow the below steps:

1)Copy the APK file to your TF memory card and insert the card into your Jarvis. 2)Open the File Manager and click the TF card icon. 3)Open the APK and click on the install button. 4)It will show the installing blocked because it is not from Apps storeGoogle Play and then please accept the permission. 5)The application is now installed. 2. Administer/remove apps TheAppsitem in theSettingmenu will display an overview of the installed apps. There are four tabs available which filter the displayed app list. Select an app to view its detailed information. 3. Add an account The best way to fully make use of your Android tablet is by linking your Google/Gmail account to your device. Open theSettingsmenu and choose theAccounts & sync item. Without any added accounts the right pane will display nothing. Instead select the option Add accountin the top right corner. To add a Google/Gmail account please selectGoogle in the pop-up and follow the instructions on the screen. After entering your Google username and password you have the option to automatically back-up your apps, setting (i.e. bookmarks and Wifi passwords) and other data. You can also add a POP3, IMAP or Exchange email account by selectingEmail. The pop-up optionCorporatewill setup aMicrosoft Exchangelink. Your system or network administrator can supply you with the server information and login credentials. Follow the steps displayed on-screen to complete the account linking process. After you successfully linked your account(s) with the tablet you can toggle the automatic synchronization on and off by using the switch next to theAdd accountoptions. Basic Setup 1. Changing Operating Language open the App drawer. Select the Settings option to open the Android setting menu. When selecting the option Language & input the contents will be displayed in the right pane. Now open the option Language and choose a language for your tablet to operate in. This pane also displays the keyboard setting which you can customize, enable or disable. 2. Wi-Fi Setting open the App Drawer. Select the Setting option to open the Android setting menu. When selecting the option Wi-Fi the contents will be displayed in the right pane. Theswitch allows you to quickly toggle Wi-Fi on and off. In the Wi-Fi content panel you can view the formerly used Wi-Fi networks and the Wi-Fi networks that have been detected by the tablet. To research for new available networks; please press scan located in the right top corner. The option Add Network allows you to add a network by manually inputting the SSID network and security method. Whether manually added or automatically detected, you may need to fill in a password to be accepted on the network. Please contact your system or network administrator for the correct information. Advanced network settings can ne found by clicking the options icon. Basic System Setting System Settings Click the "Settings" icon to open the system setup interface, as shown below:

Select the relevant items corresponding operation, for example:

* Wireless and networks:

* Sound

* Display

* Storage

* Applications

* Date and time and so on. 1. Date and Time In the Settings interface, select "Date and Time" settings option, enter the date and time settings screen:

It can be automatically provided by the network to determine the time, can also be adjusted manually, select Set date, select the time zone, set the time, time format, date format and other information. 2. Brightness In the Settings interface, select "Display" to enter the Display Settings screen, select

"Brightness"

3. Sleep Mode The screen will automatically lock down after a period of time without any control. In the Settings interface, select "Display" to enter the Display Settings screen, select "sleep" and adjust the timer setting. 4. WIFI Setting Click on the main menu in the "Settings" icon to enter the system setting interface, click on

"Wi-Fi" column can be quickly opened and closed WIFI function. Click "WI-FI Settings" lists and search the wireless router, follow the prompts to complete the WIFI network links. Some encrypted network, you need to enter a valid key. Trouble shooting The picture visual effect is too dark or fuzzy

-Please inspect brightness, contrast and the color level whether adjusts the optimum condition.

-Replaces the file in the TF card.

-Check the LCD does not enter water or damage. File cant play back

-Please make sure the file is supported.

-Please make sure the file is not damage.

-Restart the device and try again. Please contact our customer service if you face any problems on operating the device. E-mail: sales@glorystargroup.com www.glorystargroup.com

54mm

: ALU210

: DC 12V 2.2A

: 32W(MAX) Model Input Rating Caution!

Risk of electric shock. Do not remove cover. Screw lengths inside the cover should not be longer than 6mm. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Made In China www.glorystargroup.com FCC ID: 2AACS-ALU210 64mm 64mm

April 15, 2024 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Shenzhen Timeway Testing Laboratories/ Zone C, 1st Floor, Block B, Jun Xiang Da Building, Zhongshan Park Road West, Tong Le Village, Nanshan District, Shenzhen, China (Name of Agent company name and address) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with G l o r y S t a r T e c h n i c s ( S h e n Z h e n ) C o . , L t d . /

Bldg., 9, 4/F., ZongYuntai Technology Industrial Park, Songbai Road, Shiyan Street, Boan, Shenzhen, China

<Signature>

NameHei Man Cheung TitleManager Applicant CompanyGlory Star Technics(Shen Zhen)Co.,Ltd.

April 15, 2024 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AACS-ALU210 Product Name: Commercial Kiosk Tablet Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:

Schematics Block diagram Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors.

<Signature>

NameHei Man Cheung TitleManager Applicant CompanyGlory Star Technics (Shen Zhen) Co.,Ltd.

Glory Star Technics (Shen Zhen) Co., Ltd. Covered Equipment Certification Attestation Letter 4/16/2024 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2AACS-ALU210 Glory Star Technics (Shen Zhen) Co., Ltd. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not covered equipment. Glory Star Technics (Shen Zhen) Co., Ltd. (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Signed:

Printed name: Hei Man Cheung Title: Manager Company Name: Glory Star Technics (Shen Zhen) Co., Ltd. Date: 4/16/2024

Glory Star Technics (Shen Zhen) Co., Ltd. U.S. Agent Designation for Service of Process -

Certification Attestation Letter 4/16/2024

+0: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTN.: Reviewing Engineer FCC ID: 2AACS-ALU210 FRN of applicant: 0022705677 Per section 2.911(d)(7) of the FCC rules, Glory Star Technics(Shen Zhen)Co.,Ltd. (the applicant) certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process:

Company Name: UUX GROUP INC FCC Registration Number (FRN): 0033701590 Physical U.S. Company Address: 36 South 18th Avenue, Suite A Brighton, CO USA 80601 County: Adams Contact Person: Jack Fu Agent Email Address: uuxforever@outlook.com The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed:

S Piet U\) Tet ion Chawrs \

Signed: 7 Agent Signed (if-gifferent from Applicant):

Printed name: Hei Man Cheung Signed: fn UA Title: Manager Printed name: Jack Fu Company Name: Glory Star Technics (Shen Title: Manager Zhen) Co., Ltd. Company Name: UUX GROUP INC Date: 4/16/2024 Date: 4/10/2023

* the applicant must designate a contact located in the United States for purposes of acting as the applicant's agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process.