BEFORE YOU BEGIN 1 CHARGE Your Headset's Battery 2 START BLUETOOTH FEATURE Your Phone 3 PAIR Your Headset H700 Bluetooth Handsfree Headset Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions. Take a moment before you get started to familiarize yourself with your new H700 Headset. Get Connected in 4 Quick Steps 1 - CHARGE 2 - START BLUETOOTH FEATURE 3 - PAIR 4 - TEST AND USE For help, contact us at 1- 877-MOTOBLU or visit us at www.hellomoto.com Volume Buttons Multi-Color Indicator Light Boom 1 Plug the Motorola charger into the end of the headset. Microphone Call Button Speaker
(on reverse side) The indicator light turns red when the battery is charging. It may take up to 1 minute for the indicator light to turn on. When the headset's battery is fully charged
(about 2 hours), the indicator light turns green. 2 Disconnect the charger. Note: Headset is not functional while charging. 2 3 4 5 Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 www.hellomoto.com 1-877-MOTOBLU 1-800-331-6456 (United States) 1-888-390-6456 (TTY/TDD United States for hearing impaired) 1-800-461-4575 (Canada) Guide Number: 6809495A68-O MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. Motorola, Inc. 2005. Step B - SET YOUR PHONE TO LOOK FOR YOUR HEADSET 1 2 3 4 5 M(
For most Motorola phones:
On your Motorola phone, press (Menu ) >
Settings > Connection > Bluetooth Link >
Handsfree > Look for Devices. The phone lists Bluetooth devices it finds. Select Motorola H700. Select OK or Yes to pair your headset with your phone. Enter the passkey: 0000 Select OK. When your headset successfully pairs with your phone, the indicator light changes from steadily lit to flashing blue. Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide. Your phone and headset are now paired and ready to make and receive calls. To make a call:
Open the headset boom and place the headset over your ear. On your phone, dial the number you want to call and press the SEND key. If your phone and headset are successfully paired, you will hear ringing on the headset. 1 2 3 After you have successfully paired your phone and headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON. To save battery power, turn OFF the headset when you don't use it for an extended time. Your phone's Bluetooth feature is off by default. To use your headset, you must turn on the Bluetooth feature in your phone. For most Motorola phones:
1 Press (Menu ) > Settings > Connection >
Bluetooth Link > Setup. M(
Scroll to Power. Select Change. Scroll to On. Press Select to turn on the Bluetooth feature. The Bluetooth feature remains on until you turn the feature off. Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide. See Features and Functions Guide on the reverse side for information on using your H700. 3 PAIR CONTINUED Your Phone 4 TEST AND USE USING YOUR H700 Before you can use your headset, you must pair
(link) it with your phone. Step A - PUT THE HEADSET IN PAIRING MODE 1 2 3 Ensure the headset is turned off (indicator light not blinking and headset boom is closed). Press and hold the Call E button. After about 4 or 5 seconds, the indicator light becomes steadily lit in magenta. Release the Call E button and immediately open the headset boom. The indicator light remains steadily lit in magenta. If the indicator light is flashing in blue or not steadily lit when opening the headset boom, repeat steps 1 through 3 on this page. TROUBLESHOOTING My phone doesn't find my headset. Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices (see step 3). My headset worked before but now it's not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3). Support. If you need more help, contact us at 1- 877-MOTOBLU. FOR DETAILS ABOUT YOUR HANDSFREE DEVICE See the users guide or visit us at www.hellomoto.com/bluetooth and click Support. DRAFTDRAFT H700 Bluetooth Handsfree Headset IMPORTANT:
IMPORTANT:
Be sure to first follow the Be sure to first follow the Quick Start Guide Quick Start Guide on the reverse side to on the reverse side to complete initial setup of complete initial setup of your H700. your H700. TURNING ON AND OFF To turn your headset on, open the headset boom. The indicator light flashes blue. To turn your headset off, close the headset boom. The indicator light will turn off. To conserve battery power, turn off your headset when you don't plan to use it for a while. Multi-Color Indicator Light WEARING THE HEADSET 1 2 3 4 Open the headset boom, then open the earhook (45 from the headset). Loop the earhook over your ear. Press the headset to your ear. Point the headset boom towards your mouth. MAKING CALLS MAKING CALLS CONTINUED
Action Tap the Call button and speak the
name after the tone Tap the Call button or close headset boom Open headset boom or tap the Call button
(if boom is already open) Press and hold the Call button until you hear a beep Press and hold the Call button until you hear a beep Function Make a voice dial call
End a call
Receive a call
Reject a call
Redial last call
Note: Your H700 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information.
Action Press and hold the Call button (places first call on hold) Press and hold the Call button Press and hold
Function Answer a second
incoming call
Toggle between two active calls
Join a 3-way call
(Note: Feature is phone/ both Volume buttons network dependent.) Put an active call on hold or resume a call on hold Transfer a call from the phone to the headset Disable or enable the indicator light
Mute or unmute a call
Press and hold both Volume buttons for 3 to 4 seconds Tap both Volume buttons Press and hold the Call button until you hear a beep Tap the Call button
CHANGING FOR USE ON OTHER EAR You can wear your H700 headset on your left or right ear. The headset comes ready for the right ear. To change the headset for the left ear:
1 Open the headset boom, then open the earhook
(90 from the headset). 2 3 4 Gently lift and pull the top of the earhook up and off the upper hinge pin. Then, pull it away to remove it. Flip the headset over. Hook the bottom of the earhook onto the lower hinge pin, then lift and pull the top of the earhook over the upper hinge pin. 1 Open Earhook 2 Pull Earhook Up Hinge Pin INDICATOR LIGHTS With the Charger Plugged In
Indicator Light
Red (steady)
Yellow (steady)
Green (steady)
Headset Status Charging (less the 80% charged) Charging (more than 80% charged) Charging complete With No Charger Plugged In
Indicator Light Off
Magenta (steady) Red
Blue (10 rapid flashes)
Blue (slow pulse)
Blue (quick flash) Note: After 5 minutes of inactivity, the light stops flashing to conserve power, but the headset remains in standby mode. Headset Status Power off Pairing mode Battery low Pairing successful Connected
(on a call) Standby (not on call)
CHANGING VOLUME BUTTON ORIENTATION You can also change the orientation of the volume buttons on your headset. 1 2 Turn the headset power off. Press the Call E button until the indicator light becomes steadily lit in magenta, then press the Volume button you want to assign as the "volume up"
button. Volume Buttons Call Button AUDIO TONES The audio tones provide information about your headset status.
Out of range Headset Status Volume at minimum Audio Tone Single high tone when pressing volume button or maximum Five rapid high tones Low battery repeated every 60 sec. No audio indications; deteriorating quality Incoming call Ring tone
Pairing confirmation Single high tone Voice activation Single low tone
Voice tag not Dual high/low tone recognized
End call Single high tone Phone network Low to high tone not available
Two ascending tones Mute enabled Two descending tones Mute enabled
DRAFTDRAFT