FCC ID: 2ABYN038 Bi-color LED Video Light,LED Light

Optional Accessory

(ES45 Bi-color mode/FX Special mode the colotemperature Rotate the CCT/SET knob on the main mode: the main intefacediplays adjustment:

2.Mode selection:

Color temperature 2.1.1 Color temperature interface to adjust values, and quickly 2.1.2 Brightness 0%to 100%

the color temperature rotate 500 unit values. adjustment:

Select the DIM dial to adjust Normally

(2800~65001<). from brightness rotate 100 unit modi Effects FCC Statement Power Management Power supply Adapter power supply:

External battery power supply:

compartment. body to achieve 100-240V-50/60Hz 2A, output:

two NP-F970 Then, use powe supply. DC power cable to connect the battery batteries 16.BV 4.2A. input:

install into the battery case with the light The battery case can only offer battery discharging powered by battery box, two batteries use one battery individually. of charging. When instead do not be used simultaneously. Please shall Operation 1.Power on Press the power switch will show the current information to control the ON/OFF of the light, and the OLED display 8 65QQK 49%

against to operate the by the party is subject approved received, authority reasonable operation. for compliance radio frequency in a residential two conditions:

installation. to part 15 of the FCC Rules. with the instructions, device, to provide and found to comply with the limits

(1) This device may not cause harmful has been tested pursuant protection This equipment not expressly could void the user's energy and, if not installed may cause harmful and (2) this device must accept any interference that may cause undesired These harmful uses generates and used in interference to radio that interference will not does cause harmful This device complies with part 15 of the FCC Rules. Operation to the following interference, including interference Any Changes or modifications responsible equipment. Note: This equipment for a Class B digital limits are designed interference and can radiate accordance communications. occur in a particular interference turning the interference

- Reorient

- Increase

- Connect which the receiver

- Consult

- The device has been evaluated requirement. To maintain compliance with FCC's RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20 cm the radiator your body. antenna(s) must not be co-located or operation in conjunction with This device and its any other antenna or transmitter. However, there is no guarantee If this equipment reception, off and on, the user is encouraged measures:

or relocate the separation between the equipment the dealer or an experienced radio/TV to meet general antenna. the equipment on a circuit which can be determined to try to correct technician for help. RF exposure and receiver. different by one or more of the following to radio or television installation. the equipment the receiving is connected. into an outlet from that to by 17-

18-

45.02 mm m m 0 5

. 1 3 Input :100 - 240V ~ 50 / 60Hz / 1.3A Max. Ontput : DC14.0V 3.4A Ta=40C Input :100 - 240V ~ 50 / 60Hz / 1.3A Max. Ontput : DC14.0V 3.4A Ta=40C FCC ID: 2ABYN038 FCC ID: 2ABYN038 R-R-gdx-ML30Bi R-R-LK6-LK8620 210-167333 R-R-gdx-ML30Bi R-R-LK6-LK8620 210-167333 GODOX Photo Equipment Co., Ltd. Add: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao'an District, Shenzhen 518103, China Made in China GODOX Photo Equipment Co., Ltd. Add: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao'an District, Shenzhen 518103, China Made in China

GODOX PHOTO EQUIPMENT CO.LTD Agent Authorization Company: GODOX Photo Equipment Co.,Ltd. Address :4th Floor of Building 1, 1st to 4 th Floor of Building 2, 4th Floor of Building 3,1st to 4th Floor of Building 4, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao'an District, Shenzhen 518103,China Product Name: Bi-color LED Video Light,LED Light Model Number(s): ML30Bi Product Description: Bi-color LED Video Light,LED Light We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Sieg weus Date: 2021.09.15 Name: HONGWU WEN Title: Manager Company: _GODOX Photo Equipment Co.,Ltd.

GODOX PHOTO EQUIPMENT CO.LTD 1st to 4th Floor, Building 2/1st to 4th Floor, Building 4, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Baoan District, Shenzhen, 518103 China Date: 09/15/2021 FCC ID: 2ABYN038 Model Number: ML30Bi, ML30 To:

Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, GODOX PHOTO EQUIPMENT CO.LTD declare that this EUT (FCC ID: 2ABYN038) will conduct FCC compliance testing, the sDOC part recognized test lab(Shenzhen NTEK Testing Technology Co., Ltd.). 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Baoan District, Shenzhen 518126 P.R. China Please contact me if you have any question. Sincerely,

(Signed) wu WN, i ie Nbr Co e ag Name / Title: HONGWU WEN / Manager Company: GODOX PHOTO EQUIPMENT CO.LTD Address: 1st to 4th Floor, Building 2/1st to 4th Floor, Building 4, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Baoan District, Shenzhen, 518103 China Phone: 0755-23210502 Email: whw@godox.com

GODOX PHOTO EQUIPMENT CO.LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 09/15/2021 Subject; Request for Confidentiality FCC ID: 2ABYN038 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market.

-xISchematic Diagram

><|Block Diagram

><]Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

[xJExternal Photos ix<]Test Setup Photos

>xJInternal Photos

-<]User Manual L_]For 45 days, pursuant to Public Notice DA 04-1705. OR _ {X|For 180 days pursuant to KDB 726920 DO1. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, DAN Signature: au ae a 5 27, (4 Name: HONGWU WEN 0 Title: Manager

GODOX Photo Equipment Co.,Ltd. Family models declaration letter. 2021-09-15 We Company: GODOX Photo Equipment Co.,Ltd. Address: 4th Floor of Building 1, 1st to 4 th Floor of Building 2, 4th Floor of Building 3,1st to 4th Floor of Building 4, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao'an District, Shenzhen, 518103, China Product: Bi-color LED Video Light,LED Light Model Name: ML30Bi Family Model: ML30 All the model are the same circuit and RF module, except the ML30Bi is dual color temperature, ML30 is single color temperature Thanks Sincerely, Signature [ox eo

[Name] Hongwu Wen ke ie

[Title] manager (s>

GODOX Photo Equipment Co.,Ltd. 4th Floor of Building 1, 1st to 4 th Floor of Building 2, 4th Floor of Building 3,1st to 4th Floor of Building 4, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao'an District, Shenzhen, 518103, China