FCC ID: 2ABYN023 E-Sports LED Light

Foreword Thank you for purchasing Godox product!

E-sports LED Light ES45 Kit supports free brightness and color temperature adjustment, 2.4G wireless and smartphone APP control. It provides lighting for electronic sports, livestream, make up and video recording with compact body, easy operation and great portability. Main Features 176 premium LED bulbs with all-in-one light board, offering soft light without blinding the eyes Freely adjust each groups brightness(0%-100%) or color temperature(2800K-

6500K) Built-in lithium battery whose duration up to approx. 22 hours Can be easily controlled via detachable control panel Support 2.4G wireless or smartphone APP control OLED panel and parameters auto saved Simple, stylish and suitable for using on the table Warning Always keep this product dry. Do not put it in high-temperature or in damp conditions. Built-in over-temperature protection functions, this product will enter protection status when the temperature is too high and back to normal after the temperature decreased. Do not touch the product with wet hands. As this product do not have waterproof function, please take measures of waterproof in rainy or damp environment. Names of Parts Main Body 01. 176 LED beads 02. light board 03. Power Switch 04. Indicator 05. DC Power Socket 05. DC Power Socket 06. Thermovent 1 07. Thermovent 2 08. Bracket Mounting Hole 1 09. Bracket Mounting Hole 2

- 09 -

- 10 -

Battery Management 1. Power Supply of Main Body DC Power supply by adapter:

input: 100~240V 50/60Hz 1.3A, output: 14V 3.42A. Note:

* When connected to DC power, the control panels battery power will be displayed in full level.

* The included Godox adapter must be applied, otherwise, the tested parameters may not keep to the same. 2. Power Supply of Operate Panel There are two methods to supply power for operate panel. 1. When the main body is being charged, install the operate panel onto the main body to get power. 2. Detach the operate panel from the main body. Then, charge the panel through Type-C USB cable. Function Operate Panel 01. Power Switch 02. DIM Brightness Select Dial 03. CCT Color Temperature Select Dial 04. GR/CH Button 06. OLED Display (white in blue) 07. Type-C USB Port

(only for charging) What's in the Box Light Body *1 Detachable Panel *1 Mounting Rod *1 Power Cable *1 Adapter *1 Instruction Manual *1

- 11 -

- 12 -

Operation 1. Using the Light Insert the adapter into DC port. Press the O- power switch to power it on, and the LED light will be lighted on. When the blue light is always lighting the lights group is set to the same as the transmitters and has already received the transmitters signal, the indicator will be blinking in red. Short press the power switch of operate panel to power it on or off. The OLED panel will display the current information after being powered on. Brightness Adjustment In normal status, turn the DIM select dial leftwards to decrease the brightness value while rightwards to increase. The light brightness can be adjusted from 0%

to 100%. And the adjusted value is 1 in common adjustment and changes to 10 in quick adjustment. CCT GR/CH DIM Color Temperature Adjustment In normal status, turn the CCT select dial leftwards to decrease the color temperature value while rightwards to increase. The color temperature can be adjusted from 2800K to 6500K. And the adjusted value is 100 in common adjustment and changes to 500 in quick adjustment. CCT GR/CH DIM Wireless Modes Selection 1. The detachable operate panel processes 2.4G wireless remote functions. Please put the operate panel onto the LED light and set the channel (CH) and group (GR) parameters. Then, detach the operate panel to adjust brightness, color temperature and other functions. Note: The channels and groups of operate panel and LED light have been already matched by default. There is no need for resetting. The main body can only receive wireless signals after being powered. Several operate panel can be applied simultaneously. Set the channels and groups to the same as operate panels to control the parameters of multiple LED lights. CH Channel / GR Group Adjustment 1. CH Channel adjustment: In normal status, short press GR/CH button once, and the channel value is selected. Turn the CCT select dial to choose channel from 1 to 32. 2. GR Group adjustment: In normal status, short press GR/CH button twice, and the group value is selected. Turn the CCT select dial to choose group from A, B or C. 3. Short short press the GR/CH button thrice to exit from wireless adjustment of channels and groups. 2. With smartphone APP control through Bluetooth, the operate panel can be connected to several LED lights to achieve convenient operation. Bluetooth connection Scan the QR code to download the "Godox Light"

smartphone APP(can beused by Android and Apple system). For more smartphone APP operations, please open the "help" in APP to gain detailed guidance.

- 13 -

- 14 -

Note:

The MAC code check and Bluetooth password reset must be proceeded after the operate panel and main body have already been turned on and successfully connected. 1. MAC code check: when the operate panel and main body have been turned on, long press the GR/CH button for 2 seconds to enter the Bluetooth interface. The MAC code will be displayed on the top left. 2. Bluetooth password reset: in MAC code Yes interface, turn the CCT select dial to choose . Then, short press GR/CH button once, and the Bluetooth icon will be blinking, which means the password is reset. Turn the CCT select dial to choose . Then, short press the GR/CH button to back to the main interface. A8A8 reset Yes Technical Data Model DC Power Supply by Adapter Lithium Battery of Operate Panel Power Channel Group Color Temperature 100% Lumen (lm) 100% Luminosity (lx)

(darkroom, 0.5m distance) CRI TLCI Brightness Range Control Method Quantity of LED Beads Working Environment Temperature Dimension Weight ES45 Kit Input: 100~240V 50/60Hz 1.3A Output: 14V 3.42A 3.7V Lithium battery (built-in) Up to approx.56W in max. (color temperature: 4100K) 32(1~32) 3(A, B, C) 2800~6500K Max. 2500 Max. 4100 96 97 0~100%

Smartphone APP/2.4G Wireless 176

-10~40C 367*230*31.04mm (operate panel is not included) 367*230*45.9mm (operate panel is included) 1.33KG (operate panel is included)

* Product design and specifications are subject to change without notice. Standby Functions Maintenance 1. The display of operate panel will get darker automatically after detached from the main light body and without operation for 1 minute. 2. The LED light will turn off automatically after detached from the main light body and without operation for 1 hour. Avoid sudden impacts and the product should be dedusted regularly. This product, except consumables e.g. battery and adapter, is supported with a one-year warranty. Maintenance of the flash must be performed by our authorized maintenance department which can provide original accessories. Unauthorized service will void the warranty. If the product had failures or was wetted, do not use it until it is repaired by professionals. Changes made to the specifications or designs may not be reflected in this manual.

- 15 -

- 16 -

FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. QCPASS

- 17 -

Warranty Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safekeep it. Thank you!

Product Information Customer Information Model Product Code Number Name Contact Number Address Seller Information Name Contact Number Address Date of Sale Note:

Note: This form shall be sealed by the seller. Applicable Products The document applies to the products listed on the Product Maintenance lnformation

(see below for further information). Other products or accessories (e.g. promotional items,giveaways and additional accessories attached,etc.) are notincluded in this warranty scope. Warranty Period The warranty period of products and accessories isimplemented according to the relevant Product Maintenancelnformation. The warranty period is calculated from the day(purchase date) when the product is bought for the first time,And the purchase date is considered as the date registered onthe warranty card when buying the product. How to Get the Maintenance Service If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid wananty card. If you cannot provide valid warranty card, we may offer you maintenance service once conrmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation. Inapplicable Cases The guarantee and service offered by this document are not applicable in the following cases: . The product or accessory has expired its warranty period; . Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, ooding and damp environments, etc; . Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment; . The original identifying information of product or accessory is modied, alternated, or removed; . No valid warranty card; . Breakage or damage caused by using illegally authorized, nonstandard or non-public released software; . Breakage or damage caused by force majeure or accident; . Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope. Maintenance and Service Support Information The warranty period and service types of products are implemented according to the following Product Maintenance Information:

Product Type Parts Name Circuit Board Battery Other Items Electrical parts e.g.battery charger, power cord, sync cable, etc. Flash tube, modeling lamp, lamp body, lamp cover, lockingdevice, package, etc. Maintenance Period(month) 12 3 12 No Warranty Service Type Customer sends the product to designated site Customer sends the product to designated site Customer sends the product to designated site Without warranty Godox After-sale Service Call 0755-29609320-8062

GODOX PHOTO EQUIPMENT CO.LTD Agent Authorization Company:

GODOX Photo Equipment Co.,Ltd. 1st to 4th Floor,Building 2/lst to 4th Floor, Building 4 ,Yaochuan Industrial Address:

Zone, Tangwei Community,Fuhai Street,Baoan District,Shenz hen, 518103 China Product Name: E-Sports LED Light Model Number(s):

ES45 Kit Product Description:

E-Sports LED Light We to equipment. MiCOM authorize our behalf Labs on all act on Inc., 575 matters Court, Boulder the concerning Pleasanton, certification of above named California 94566, USA, We approval that declare and is Labs Inc. of certification to regulatory equipment allowed the forward all MiCOM to agencies information to and the related as required to by carried out any discuss Labs on MiCOM issues the our behalf shall concerning have approval the same all application. our and of acts own. effect as Any acts Signature:

2021/03/17 Name: HongwuWen Title: manager Company: GODOX PHOTO EQUIPMENT CO.LTD cl.Jo)...\'"'.3. 1 ;! Date:

GODOX PHOTO EQUIPMENT CO.LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road |

Columbia, MD 21046 USA Date: 2021/03/17 Subject; Request for Confidentiality FCC ID: 2ABYN023 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. |

These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram X<|Block Diagram

[_]Parts List

[Operational Description L_]Tune-up Procedure L_] FCC_Software_Security_Requirements_for UNII_ devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

[<]External Photos ix]Test Setup Photos Xlinternal Photos

[<]User Manual _]For 45 days, pursuant to Public Notice DA 04-1705. OR XXIFor 180 days pursuantto KDB 726920 DO1. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Hongwu Wen OA. WW) CAN Title: Manager Ml 4 i oD Email: whw@godox.com Apr - o2- z