FCC ID: 2ABYN022 Focusing LED Light

0 0

0 0 0 0 6 S

5 0 7 LED Focusing LED Light European importers:

Company name: APEX CE SPECIALISTS LIMITED Address:UNIT 3D NORTH POINT HOUSE,NORTH POINT BUSINESS PARK,NEW MALLOW ROAD,CORK,T23 AT2P, IRELAND British importer:

Company name: APEX CE SPECIALISTS LIMITED Address: 89 Princess Street, Manchester, M1 4HT, UK

: 2

: 0755-29609320(8062) : 0755-25723423 : godox@godox.com GODOX Photo Equipment Co., Ltd. Add: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Baoan District, Shenzhen, China Tel: +86-755-29609320(8062) Fax: +86-755-25723423 E-mail: godox@godox.com godox.com Made in China Instruction Manual LEDS60 2.4GDMX

1. 2. 3. 4. 5. 6. 7. 8.

- 01 -

- 02 -

*1

*1

*1

*1

*1

*1

*1 1. 2. 3. MENU 4. FX 5. 6. SET 7. +-

8. DMX

() 9. DMX

() 10. 11. 12. 13. 14. 15. 16.

- 03 -

- 04 -

AC 1. 2. 15 15 V() V V14.8V 16.8V SA-P

(SA-01 85mm) SA-01 85mm SA-02 60mm SA-03 150mm 3. SA-05 SA-06 SA-07 SA-09 SA-10 SA-11C() SA-11T() RC-A6

- 05 -

- 06 -

LEDLED

(0~100%) FX

+-FX 8(OFF/1~8), 1. 2.4G LEDS602.4GRC-A6 2.4G16LED32 99ID LED(CH),(GR)ID LED CH/GR/ID MENU+-

CHGRID CHSET

+-(CH)

(1~32)SET FX1 FX2 FX3 FX4 FX5 FX6 FX7 Fx8 Flash 1 Flash 2 Flash 3 Storm 1 Storm 2 Storm 3 TV FXSET 1~8FX OFFFX 0%-50%

GRSET

+-(GR)

(A-F0-9), SET

- 07 -

- 08 -

3. DMX MENU+-

DMX SET

+-DMX

(1~512)10 SET MENU DMX n() n+1 CCT 0-51 n+2 DMX*(100/255) 0-100%

FX 52-255 DMX*(100/255) 0-100%

DMX*(/255) 8, DMX=160, 160*8/255=5 IDSET

+-ID(1~99 / OFF) SET MENU 10 2. 2.1 &

MENU

SET2 MENU LED APP APP 2.2 Godox Light APP APPAPP

- 09 -

- 10 -

LED 100%(LUX) 1() CRI TLCI

(CH)

(GR) 2.4G

() S60 AC 100~240V 50/60Hz 0.9A.MAX V 14.8V 60W 5600K300K

() 3200

() 40000 96 97 0~100%

321~32 16A~F, 0-9 6-55

-10~40C APP/2.4G/DMX 50 264*107*100mm 268*113*64mm 1.36kg 0.94kg

1 LED

: CMIIT ID:2020DP13510 Foreword Thank you for purchasing Godox product!

Focusing LED Light S60 is excellent for product shooting, photojournalistic and video recording, etc. It creates stable light resource and even illumination for photography. This light's brightness can be precisely adjusted with easy operation. Main Features:

With specially designed lens to gain soft and even light effect from center to edge Adjustable focusing range and light brightness enable you to observe the variation of shadow's hardness, dimension and edge contrast Precisely control the light and achieve more creative light effects when use in combination with abundant accessories Three ways of power supply (5V/7.4V/15V) offer great convenience, portability and wide application Warning Do not disassemble or modify. Should the product break down, send the defective back to the authorized service center for inspection and maintenance. If this product overheats, it will cease operation and resume working after cooling down. This is due to the built-in over-temperature protection. As this product adopts make and break device, please keep it easy to be used. Keep dry. Do not handle with wet hands, immerse in water, or expose to rain. Do not place in high temperature or high humidity conditions. Keep out of reach of children. Disconnect from the power supply when it will not be used for an extended period.

- 11 -

- 12 -

Name of Body Main Body 1. Body 2. Direction Adjusting Bracket 3. Lens 4. Accessory Latch 5. Select Dial 6. Fixing Knob 7. Thermovent 8. Power Socket

- 13 -

Controller 10. Power Input 11. Power Output 12. Battery Clip 13. Battery Release Button 14. Battery Compartment 15. Battery Base 16. Steel Cable 1. Display 2. Power Switch 3. MENU Button 4. FX Button 5. Fan Switch 6. SET Button 7. + - Select Dial 8. DMX Output Port (male) 9. DMX Output Port (female)

- 14 -

Included Items Optional Accessory The product can be used in combination with the following accessories sold separately, so as to achieve best photography effects. Light Body *1 Controller *1 Barndoor Set *1 Wrench *1 Connect Cable *1 Power Cable *1 Instruction Manual *1 SA-P Projection Attachment

(included a SA-01 85mm Lens) SA-01 85mm Lens SA-02 60mm Wide-angle Lens SA-03 150mm Telephoto Lens SA-05 Scrim Set SA-06 Iris Diaphragm SA-07 Framing Shutter

- 15 -

SA-09 GOBO Set SA-10 GOBO Holder RC-A6 Remote Control SA-11C

(Color effects set) SA-11T

(Color temperature adjustment set) Color Filter

- 16 -

Power Supply AC Power Supply 1. Insert the two ends of power source connect cable into the controllers power output port and lights power input port until a click can be heard. Pull out the connect cable: press down the PUSH button and pull out the cable simultaneously. 2. Insert the power cables output end into the controllers input port. Then, rotate it rightwards to 15 until a click can be heard. Pull out the power cable: press the PUSH button on the output end of power cable and rotate it leftwards to 15to pull out. 3. Connect power cable into the power source. V-port Battery Power Supply (Optional) Install the V-port battery onto the controllers battery compartment. Then, power the light on to operate. Note: please use the standard V-port battery with 14.8V standard voltage. Do not supply power with the battery whose voltage is over 16.8V.

- 17 -

Operation Power switch:

Short press the power switch, and the LED light will be lighted on. Press the button again to turn off the light. Brightness adjustment:

In the main interface, turn the select dial to adjust brightness from 0% to 100%. Light effects setting:

In normal status, short press the FX button once to enter the setting interface. Then, turn the select dial to choose light effects from OFF and 1 to 8. Display FX1 FX2 FX3 FX4 FX5 FX6 FX7 FX8 Scene Flash 1 Flash 2 Flash 3 Storm 1 Storm 2 Storm 3 TV Broken bulb Short press the FX button or SET button to exit from light effects modes and back to the main interface after settings finished. Note: If a light effect is selected from 1 to 8, the FX icon and light effects will be displayed on the main interface. And the brightness can be adjusted. The color temperature will not be displayed. If choose OFF, the color temperature will be displayed instead of FX icon. Silent Mode:

In normal status, short press the Fan button to turn it on or off. When turning off the fan, the LED light will enter silent mode. And the icon will be displayed and the brightness will be adjusted from 0% to 50%. Note: the fan will be turned on by default and there is no icon appeared on the display.

- 18 -

Control Mode Selection 1. 2.4G Wireless Control With 2.4G wireless system, S60 focusing LED video light has remote grouping and control function. It is recommended to purchase RC-A6 remote control

(optional) to achieve wireless control. Multiple LED lights can be controlled. 32 channels and 99 IDs are available with strong anti-interference capability. Note:

1. Please make LED light's channel, group and ID to the same as remote control's. 2. The wireless signals can only be received in the situation that the LED light is powered on. CH Channel Adjustment/GR Group Adjustment/ID Value Adjustment In main interface, short press MENU button once and turn the select dial to adjust channel, group and ID values. In CH channel setting interface, short press SET button and the channel icon will blink. Then, turn the select dial to choose channel from 1 to 32. Press the SET button to confirm and the icon will stop blinking. In GR channel setting interface, short press SET button and the group icon will blink. Then, turn the select dial to choose group from A to F and 0 to 9. Press the SET button to confirm and the icon will stop blinking. In ID channel setting interface, short press SET button and the group icon will blink. Then, turn the select dial to choose group from OFF and 1 to 99. Press the SET button to confirm and the icon will stop blinking. After setting all these parameters, short press SET button to confirm and back to the main interface. Note: the LED light will auto return to the main interface if theres no operation after 10 seconds. 2. Bluetooth Control 2.1 Bluetooth Code Display & RESET Function Check Bluetooth code: in main interface, short press MENU button. Then, press the select dial to switch the icons. The Bluetooth icon will be displayed after Bluetooth icon appeared. Bluetooth reset function: in the Bluetooth code interface, long press the SET button for 2 seconds and the Bluetooth icon will blink because of resetting. And the icon will stop blinking after successfully reset. Then, short press the MENU button to return to main interface. Note: The LED lights Bluetooth function should be turned on. The APP can be used directly on the firstly installed device (smartphone or iPad). When change to other mobile device(smartphone or iPad), the light shall be reset before the normal connection of APP. 2.2 Scan the QR code to download the Godox Light smartphone APP(can be used in Android and Apple). For more smartphone APP operations, please open the help in APP to gain detailed guidance.

- 19 -

- 20 -

3. DMX Control Mode In main interface, short press MENU button once and turn the select dial to switch until the DMX icon is displayed. Short press the SET button and the icon will be blinking. Then, turn the select dial to set the DMX channel from 1 to 512. Adjustment in 10 values quickly or 1 value normally. Then, short press the SET button to confirm and the icon will stop blinking. Short press the MENU button to return to main interface. DMX Parameters:

Operation Mode Code n(Mode) n+1 CCT 0-51 n+2 FX 52-255 Note DMX*(100/255) Integer 0-100% Brightness DMX*(100/255) Integer 0-100% Brightness

- 21 -

Technical Data Silent LED Video Light Power Supply Output Power Color Temperature 100% Illuminance(LUX)

(1m,darkroom) () CRI TLCI Brightness Range Channel(CH) Group (GR) Beam Angle Working Environment Temperature Control Method 2.4G Wireless Transmission Distance() Dimension () New weight() 2.4G Frequency Range BT Frequency Range Maximum power Maintenance S60 AC Power Supply 100~240V 50/60Hz 0.9A V-port battery Standard voltage: 14.8V (optional) 60W 5600K300K Flood(Central Area) 3200 Spot(Central Area) 40000 96 97 0~100%

32 (1 to 32) 16 (A to F/ 0 to 9) 6-55

-10~40C Smartphone APP/2.4G wireless remote control/DMX control 50m Light body: 264*107*100mm Controller: 268*113*64mm Light body: 1.36kg Controller: 0.94kg 2412MHz~2464.5MHz 2402.0-2480.0MHz 8.97dbm(for EU) This product, except consumables e.g. battery, power cable and connect cable, is supported with a one-year warranty. Avoid sudden impacts and the product should be dedusted regularly. Maintenance of the flash must be performed by our authorized maintenance department which can provide original accessories. Unauthorized service will void the warranty. If the product had failures or was wetted, do not use it until it is repaired by professionals. Changes made to the specifications or designs may not be reflected in this manual.

- 22 -

DMX*(total light effects/255) For example: total light effects 8DMX=160, light effects No.=160*8/255=5

* Product design and specifications are subject to change without notice. FCC compliance statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. RF Exposure Compliance This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 5mm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 1. The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person. 2. The lamp shall be changed if it has become damaged or thermally deformed. 3. The luminaire is intended for professional use only. QCPASS

() 12 3 12 0755-29609320-8062 Warranty Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe-keep it. Thank you!

Product Information Customer Information Model Product Code Number Name Contact Number Seller Information Name Contact Number Address Address Date of Sale Note:

Note: This form shall be sealed by the seller. Applicable Products The document applies to the products listed on the Product Maintenance lnformation

(see below for further information). Other products or accessories (e.g. promotional items,giveaways and additional accessories attached,etc.) are notincluded in this warranty scope. Warranty Period The warranty period of products and accessories isimplemented according to the relevant Product Maintenancelnformation. The warranty period is calculated from the day(purchase date) when the product is bought for the first time,And the purchase date is considered as the date registered onthe warranty card when buying the product. How to Get the Maintenance Service If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid wananty card. If you cannot provide valid warranty card, we may offer you maintenance service once conrmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation. Inapplicable Cases The guarantee and service offered by this document are not applicable in the following cases: . The product or accessory has expired its warranty period; . Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, ooding and damp environments, etc; . Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment; . The original identifying information of product or accessory is modied, alternated, or removed; . No valid warranty card; . Breakage or damage caused by using illegally authorized, nonstandard or non-public released software; . Breakage or damage caused by force majeure or accident; . Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope. Maintenance and Service Support Information The warranty period and service types of products are implemented according to the following Product Maintenance Information:

Product Type Parts Name Circuit Board Battery Other Items Electrical parts e.g.battery charger, power cord, sync cable, etc. Flash tube, modeling lamp, lamp body, lamp cover, lockingdevice, package, etc. Maintenance Period(month) 12 Warranty Service Type Customer sends the product to designated site Customer sends the product to designated site Customer sends the product to designated site Without warranty 3 12 No Godox After-sale Service Call 0755-29609320-8062

Input:100-240V~50/60Hz Max. 1.0A Output: 36V 2A

:
DC16.8V

Max. Input Lithium Battery Pack: DC16.8V SELV ta:40C tc:80C This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. godox.com FCC ID:2ABYN022 Made in China Label Location: please see external photo on page 3.

SGS North America Inc. i '

620 Old Peachtree Road Applicant Declaration SUITE 100 Suwanee, Georgia 30024 United States GODOX PHOTO EQUIPMENT CO.LTD Ist to 4th Floor,Building 2/1st to 4th Floor, Building 4 ,Yaochuan Industrial Zone,Tangwei Community,Fuhai Street,Baoan District,Shenzhen 518103 China 2ABYN 2ABYNID HONGWU WEN

+86-755-25737526-801

|, the undersigned, certify that | am an authorized signatory for the Applicant and therefore declare:

a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

(1) labeling the equipment with the exact FCC ID as specified in this application,

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with |SO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing.

(2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED.

(3) the Applicant shall, upon request by SGS, at the Applicant's expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https:/Awww.fec.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

ag AA Wem

HONGWU WEN | pT

[Title:__|Mamager TT COsCSsSOSCSCSCNNC#

NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Date: 2021-5-27 Applicant Declaration Rev:0.0

GODOX PHOTO EQUIPMENT CO.LTD TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC 1D: 2ABYNO22 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions BOM The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed oF Se Bays from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the ae applicant will notify the TCB per FCC KDB 726920 DO1 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: HONGWU WEN Title: Manager

< e Henqar Wann [OA oS. On behalf of Company: GODOX PHOTO EQUIPMENT CO.LTD Telephone: +86-755-25737526-801 E-mail: wnw@godox.com

GODOX PHOTO EQUIPMENT CO.LTD Date: 2021-5-27 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC /D: 208 To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, | acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with GODOX PHOTO EQUIPMENT CO.LTD This authorization is valid until further written notice from the applicant. Print Name: HONGWU WEN | Title: Manager On behalf of Company: GODOX PHOTO EQUIPMENT CO.LTD Telephone: +86-755-25737526-801 E-mail: wnw@godox.com