GODOX
-LD75R/150R/150RS 705-
2mm 105G A 100*140mm 0 0
0 0 0 6 L U
5 0 7 LED LED VIDEO LIGHT
: 2
: 0755-29609320(8062) : 0755-25723423 : godox@godox.com GODOX Photo Equipment Co., Ltd. Add: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Baoan District, Shenzhen, China Tel: +86-755-29609320(8062) Fax: +86-755-25723423 E-mail: godox@godox.com godox.com Made in China Instruction Manual LEDLDRGB LD75RLD150RLD150RS 1439 2.4G/APP/DMX USB 2.4TFT 1. 2. 3. (4) 4. U 5. 6. V 7. 8. 9. 1 10. 2 11. 12. 13. 14. 15. 16. 17.
- 01 -
- 02 -
*1
*1
*1
*1
*1
*1 RC-R9 1. MENU 2. LOCK 3. MODE 4. BACK 5. 6. 7. 8. 9. 1 10. 2 11. 3 12. 4 13. DC 14. DMX OUT 15. DMX IN 16. DMX OUT RJ45 17. DMX IN RJ45 18. Type-A USB 19. MIC 20. -o
- 03 -
- 04 -
AC DC 1.1
-oLED V() V(LD75R14.8V /
LD150RLD150RS26V) 1.2 MODE MODEMODE CCTRGBHSI ROSCOLEEFX
, 2.1 CCT CH 32 GRA CCT RGB HSI ROSCO LEE FX MODE 2.1.1 CCT -/
+2500K~8500K 32 GRA CH 2500K/3300K/4200K/
5600K/6500K/7500K/8500K 100
; 1000
- 05 -
- 06 -
2.1.2 CCT
+-50~0~50 CH 32 GRA 0 1 5 2.1.3CCT
0%~100%
CH 32 GRA 1 10 MODEBACK MODE 32 CH 34 GRA 34 123 34 R G B W/I 2.2 RGB 2.2.1 RGB R-/+0~255 2.2.2 G
-/+0~255 2.2.3 B
-/+0~255 2.2.4 W()
,0-100% ;
I(),0-100%
MODEBACK MODE 2.3 HSI 2.3.1 HSI
-/+0~360 2.3.2
-/+0~100 HSI MODEBACK MODE 1 10 CH 32 GRA 46 40%
360 S I 2.4 ROSCOLEE 2.4.1 ROSCOROSCO 40 2.4.2 LEELEE 20 MODEBACK MODE ROSCO CH 32 GRA E128 Blush Pink E153 Blush Pink E156 Blush Yellow E165 Blush Blue LEE CH 32 GRA 40%
40%
2.5 2.5.1 FX 1~14 FXFX CH 32 GRA 1:
2:
3:
4:
2.5.2 IIIIII 3 1439 I II III KTV 1 2 SOS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 2.6 1234 3 32 CH 34 GRA 34 123 34 1 R G B W/I
/2.4G/DMX MENUMENU 2.4G/
/DMXMENU MENU FX CH 32 GRA DMX 3.1 2.4G LD75RRC-R92.4G
,63299ID, LED(CH),(GR), ID-LED FX 02 E 97
CH/GR/ID 3.1.1 2.4G 3.1.2 CH CH 1~32 3.1.3 GR GR A,B,C,D,E,F/0~9 3.1.4 ID ID 01~99 FX CH 32 GRA 3.2 MENU 3.2.1 DMX MAC0004 3.2.2 Godox Light APP APP 3.2.3 APP APP
CCT HSI RGBW FX Filters n n+1 n+2 0-51 52-103 104-155 156-207 208-255 0-255 DMX*(100/
255) 0-100%
DMX*(100/
255) 0-100%
DMX*(100/
255) 0-100%
DMX*(100/
255) 0-100%
DMX*(
)/100
/255) DMX*(360
/255) 0-255 DMX*(
/255) 0-127LEE 128-255 ROSCO 12800 6500DMX=102, 102*(6500-2800/100)/255=14 28+14=42*100=4200 2DMX=200 H=200*360/255=282 314DMX=160,
=160*14/255=8 n+3 DMX*(100/
255) G/M DMX*(100/
255) 0-255 0-85I 86-171II 172-255III DMX*(
/255) 1-50--0--50 0--100DMX=212, GM=212*100/255=83 220DMX=96 96*20/255=00 3.3 DMX DMX DMX 3.3.1 (FOLLOW), 3.3.2 ADD,ADD512(OFF/
001~512) ADDDMXDMX DMX n+4 n+5 n+6 n+7 0-255 0-255
- 07 -
- 08 -
3.4 DMX 3.4.1 (LEAD) 3.4.2 (FOLLOW)(ADD) 3.4.3. DMX 3.4.4. (FOLLOW)(LEAD) 1. MENUMENU, 2. 3. MENU LEAD FOLLOW 01 FOLLOW 02 FOLLOW
... FOLLOW 18 DMX18 4. MENU 5. 2LOCK
- 09 -
1~32 1~32 A,B,C,D,E,F/0~9 A,B,C,D,E,F/0~9 OFF 01~99 1~99 DMX FOLLOW 001~512 001~512 0 1~3 3 ENGLISH 15 30 15 30
- 10 -
USB 1. http://www.godox.com.cn/Downloads.htmlU 2. ,UUSB 3. LED 4.
: 1.UBIN 2. USB CH GR ID LD75R 75W LD150R 150W AC 110~240V 50/60Hz 26V LD150RS 150W 26V V(1 4.8V 15100 18200 2500K~8500K 321~32 748*430*107.5mm 542*513*107.5mm 16A,B,C,D,E,F/0~9 6.3kg 5.1kg 99OFF/01~99 1439 0%~100%
-50 ~ 0 ~ +50 0-360 0%-100%
60 100%LUX 9320
/1 CRI TLCI 96 97 APP/2.4G/DMX/
30 2.4G 50
-10~40 441*410*107.5mm 3.5Kg
1. 2. 1 LED LED
: CMIIT ID:2020DP13510 Foreword Name of Body Thank you for purchasing Godox product!
LED Video Light LD series are multifunctional RGB LED lights with adjustable brightness, color temperature, hue and FX light effects. It provides lighting for product, journalist and portrait shooting, livestream and video recording with compact body, easy operation and great portability. Main Features:
Freely adjust light brightness, color temperature, multi colors and 39 kinds of light effects Can be remote controlled by 2.4G, smartphone APP and DMX Support custom setting functions and parameters with great convenience Without noise and interference in silent mode Support USB firmware upgrade to catch up with the newest technology Purchase abundant accessories to achieve more creative light effects With 2.4 inches TFT LCD display Warning Always keep this product dry. Do not put it in high-temperature or in damp conditions. Built-in over-temperature protection functions, this product will enter protection status when the temperature is too high and back to normal after the temperature decreased. Do not touch the product with wet hands. As this product do not have waterproof function, please take measures of waterproof in rainy or damp environment.
- 11 -
- 12 -
1. Light Body 2. Control Panel 3. Fixed Parts (4) 4. U-type Bracket 5. Battery Clip 6. V-port Battery Compartment 7. Battery Base 8. Battery Release Button 9. Fan Port 1 10. Fan Port 2 11. Thermovent 12. Bracket Sleeve 13. Screw of Sleeve 14. Bracket Locking Screw 15. Fixed Flat 16. Four-leaf Reflector 17. Mixed Light Lens Controller Whats in the Box Light Body *1 Adapter*1 Power Cord *1 Four-wing Reflector*1 Portable Bag *1 Instruction Manual*1 1. MENU Button 2. LOCK Button 3. MODE Button 4. BACK Button 5. Select Dial 6. Select Dial 7. Select Dial 8. Select Dial 9. Custom Button 1 10. Custom Button 2 11. Custom Button 3 12. Custom Button 4 13. DC Power Socket 14. DXM OUT Five-Core XLR Port 15. DXM IN Five-Core XLR Port 16. DXM OUT RJ45 Port 17. DXM IN RJ45 Port 18. Type-A USB Port 19. MIC Hole 20. O Power Switch Optional Accessory The product can be used in combination with the following optional accessories so as to achieve best photography effects:
RC-R9 Remote control, inverter, softbox, umbrella, light stand, honey comb, beauty dish, snoot, etc.
- 13 -
- 14 -
Power Supply There are two charging ways:
AC Power Supply Insert the output end of the adapter into the DC power socket and connect the light to power source with power cord. V-port Battery Power Supply (Optional) Install the V-port battery onto the back of controller. Then, turn on the power switch to use the light. Note: please use the standard V-port battery with 14.8V standard voltage. Do not supply power with the battery whose voltage is over 16.8V.
- 15 -
Operation Power switch:
Turn on/off the power switch to power on or off the LED light. MODE button:
Press MODE button and enter MODE interface to choose CCT mode, RGB mode, HIS mode, ROSCO and LEE gel mode and FX light effects modes. Turn the select dial to switch different modes and short press the button to enter the adjustable interface. CH 32 GRA CCT RGB HSI 2.1 CCT Mode ROSCO LEE FX Note: the LED light will auto enter MODE interface when being turned on. CH 32 GRA 2.1.1 Color Temperature: enter CCT interface and turn the select dial to adjust color temperature from 2500K to 8500K. Turn the select dial leftwards to decrease the value while rightwards to increase. Short press the select dial to choose color temperature from 7 levels in recycle:
2500K/3300K/4200K/5600K/6500K/7500K/
8500K. Adjust the value in each level: adjust 100 values in normal operation while 1000 values in quick operation.
- 16 -
2.1.2 Hue adjustment: in CCT interface, turn the select dial to adjust hue value from -50 to 0 to 50. Turn the select dial leftwards to decrease the magenta value while rightwards to increase green color. Short press select dial to quickly set the hue value to 0. Adjust the value in each level: adjust 1 value in normal operation while 5 values in quick operation. 1000 values in quick operation. 2.1.3 Brightness adjustment: in CCT interface, turn the select dial to adjust brightness from 0% to 100%. Turn the select dial leftwards to decrease the value while rightwards to increase. Short press the select dial to turn off the brightness and press it again to recover the former brightness value. Adjust the value in each level: adjust 1 value in normal operation while 10 values in quick operation. CH 32 GRA 2.2 RGB Mode Setting CH 32 GRA 2.2.1 In RGB interface, turn the select dial to adjust R value from 0 to 255. Turn the select dial leftwards to decrease the value while rightwards to increase. 2.2.2 Turn the select dial to adjust G value from 0 to 255. Turn the select dial leftwards to decrease the value while rightwards to increase. 2.2.3 Turn the select dial to adjust B value from 0 to 255. Turn the select dial leftwards to decrease the value while rightwards to increase. 2.2.4 Turn the select dial to adjust W value
(saturation) from 0 to 100%. Then, short press the select dial to adjust I value (brightness) from 0 to 100%. After setting all these parameters, press MODE or BACK button to back to the MODE interface. 2.3 HSI Mode 2.3.1 In HSI interface, turn the select dial to adjust hue value from 0 to 360. Turn the select dial leftwards to decrease the value while rightwards to increase. 2.3.2 Turn the select dial to adjust saturation value from 0 to 100. Turn the select dial leftwards to decrease the value while rightwards to increase. After setting all these parameters, press MODE or BACK button to back to the MODE interface. Adjust the value in each level: adjust 1 value in normal operation while 10 values in quick operation. 32 CH 34 GRA 34 123 34 R G B W/I HSI CH 32 GRA 46 40%
360 S I 2.4 ROSCO & LEE Gel Mode ROSCO CH 32 GRA 2.4.1 ROSCO Gel selection: enter ROSCO interface and turn the select dial to choose from 40 gels in recycle. 2.4.2 LEE Gel selection: enter LEE interface and turn the select dial to choose from 20 gels in recycle. After setting all these parameters, press MODE or BACK button to back to the MODE interface. E128 Blush Pink E153 Blush Pink E156 Blush Yellow E165 Blush Blue LEE CH 32 GRA 40%
40%
2.5 FX Light Effect Modes 2.5.1 Enter FX interface and turn the select dial to choose light effects modes from 1 to 14 categories. FXFX CH 32 GRA 1:
2:
3:
4:
2.5.2 After selecting the category, press the select dial to choose the modes from I, II and III, which will be displayed in recycle. Choose light effects from 14 categories which are divided into 39 kinds according to different requirements. No. Display Scene Display I Display II Display III 1 2 3 4 5 6 7 8 9 10 11 12 13 14 RGB cycle Slow speed Medium speed Quick speed Laser Flash Birthday party KTV Disco Flash Press conference Paparazzi Lightning Discontinuous Frequent Sustainable Broken bulb Discontinuous Frequent Sustainable TV Slow speed Medium speed Quick speed Candle Discontinuous Frequent Sustainable Fire Firewood Campfire Fire hazard Firework Brief Continuous Show Police car Strong flash Frequent flash Quick flash Fire truck Strong flash Frequent flash Quick flash Ambulance Strong flash Frequent flash Quick flash Music SOS Mode 1 Mode 2 2.6 Quick Custom Function Quick custom function setting button 1, 2, 3 and 4: long press the button for 3 seconds to save the current set parameter or recover the preset values. Short press the button to change the preset parameters quickly. 32 CH 34 GRA 34 123 34 1 R G B W/I Control Mode Selection Bluetooth Control/2.4G Wireless Control/DMX Control Press the MENU button to enter MENU interface. Turn the select dial to choose control mode from 2.4G wireless remote control, Bluetooth control and DMX control. After setting all the modes, press the MENU button to back to the MENU interface. FX CH 32 GRA DMX 3.1 2.4G Wireless Setting With 2.4G wireless system, LD series LED video light has remote grouping and control function. It is recommended to purchase RC-A6 remote control(optional) to achieve wireless control. Up to 16 groups of LED lights can be controlled, 32channels and 99 IDs are available with strong anti-interference capability. Note:
1. Please make LED light's channel (CH), group (GR) and ID to the same as remote control's. 2. The wireless signals can only be received in the situation that the LED light is powered on. Choose wireless mode and short press select dial to enter wireless setting interface. Then, short press the button to choose wireless power switch, channel CH, group GR and ID. Turn the button to set and short press it to confirm. 3.1.1 2.4G Wireless power switch: choose wireless and turn the select dial to turn on or off the wireless. 3.1.2 CH channel adjustment: choose channel and turn the select dial to choose channel value from 1 to 32. 3.1.3 GR Group adjustment: choose group and turn the select dial to choose group value from A, B, C, D, E and 0 to 9. 3.1.4 ID Setting: choose ID and turn the select dial to choose ID value from 01 to 99. 3.2 Bluetooth Setting In MENU interface, choose Bluetooth and short press button to enter Bluetooth interface. 3.2.1 Bluetooth Power Switch: turn the button to turn on or off the Bluetooth. FX 02 E 97 FX CH 32 GRA DMX MAC0004 3.2.2 Scan the QR code to download the
"Godox Light" smartphone APP (can be used by Android and Apple system). For more smartphone APP operations, please open the "help" in APP to gain detailed guidance. 3.2.3 Bluetooth reset function: in Bluetooth interface, short press button to choose reset. Then, turn the select dial to choose Yes. Note: the APP can be used directly on the firstly installed device (smartphone or iPad). When change to other mobile device (smartphone or iPad), the light shall be reset before the normal connection of APP. 3.3 DMX Control Mode Choose DMX and short press the select dial to enter DMX interface. 3.3.1 Turn the select dial and set the light to FOLLOW mode. 3.3.2 Short press the select dial button to choose 512 addresses (ADD) from OFF and 001 to 512. After setting the ADD, insert the one end of DMX connect cord into the controllers DMX output port and the other end into the lights DMX input port. n n+1 n+2 n+3 n+4 n+5 n+6 n+7 n n+1 n+2 n+3 n+4 n+5 n+6 n+7 Please refer to the data sent by control center as follows:
Operation mode CCT HSI ADD Code RGBW FX Filters Note 0-51 52-103 104-155 156-207 208-255 0-255 DMX*(100
/255) Integer 0-100%
Brightness adjustment DMX*(100
/255) Integer 0-100%
Brightness adjustment DMX*(100
/255) Integer 0-100%
Brightness adjustment DMX*(100
/255) Integer 0-100%
Brightness adjustment DMX*(360
/255) Integer Hue Selection 0-255 Intensity of red light DMX*(Total quantity of light effects
/255) 0-127LEE 128-255 ROSCO 1. Color Temperature Adjustment(e.g. min. color temperature 2800, min. color temperature 6500, DMX=102,102*((6500-2800)/100)/255
=14 (corresponding color temperature 28+14=42*100=4200) DMX*(Max. color temperature-
min. color temperature)
/100)/255) Integer 2. Hue adjustment
(e.g. DMX=200: H=200*360/255=282) 3. For example: total number of special light effect 14, DMX=160, number of light effect =160*14/255=8 1. Hue adjustment (-50050 corresponding value 0--100) e.g. DMX=212, GM mapped value=212*100/255=83 2. For example, the total quantity of gels is 20, DMX=9696*20/255=0
(gel 0) DMX*(100
/255) Integer G/M Setting DMX*(100
/255) Saturation setting 0-255 Intensity of green light 0-85I 86-171II 172-255III DMX*( Total quantity of gels/255) Integer 0-255 Intensity of blue light 0-255 Intensity of white light 3.4 DMX Port LEAD and FOLLOW Mode 3.4.1 Set one light as LEAD mode. 3.4.2 Set other lights as FOLLOW modes (no needs to set ADD). 3.4.3 Connect the lights with DMX connect cable. 3.4.4. The lights in FOLLOW modes will automatically synchronize the light in LEAD mode. LEAD FOLLOW 01 FOLLOW 02 FOLLOW
... FOLLOW 18 DMX18 4. Silent Mode In MENU interface, turn the select dial to choose fan and short press it to enter fan interface. Then, turn the select dial to choose turn on or off. Icon will be displayed once turned off the fan and silent mode will be achieved. 5. Locking function:
Long press the LOCK button for 2 seconds to lock or unlock the operation interface. Icon will be displayed when being locked. Custom Setting Function 1. Press MENU button to enter the menu interface and turn the select dial to choose the custom function icon. 2. Short press the select dial once and turn it to choose custom functions. 3. Press MENU button to back to the main interface. Custom Function Setting & Description Selection Wireless Restrictions in Usage Wireless Setting Off On Channel 1~32 Choose any figure from 1 to 32 Group A,B,C,D,E,F/0~9 Choose any letter or figure from A,B,C,D,E,F and 0 to 9 ID OFF Off 01~99 Choose any figure from 1 to 99 Bluetooth Bluetooth Off Reset On No Yes Start resetting DMX Mode FOLLOW FOLLOW mode Needed to be set in FOLLOW mode LEAD LEAD mode Address 001~512 Choose any figure from 001 to 512 Fan Setting 0 Off On Off Silent Mode Screen Brightness 1~3 3 Language Simplified Chinese Chinese ENGLISH English Restore Factory Setting Screen Sleep No Yes 15 min. 30 min. Never Scree will enter sleep if there is no operation after 15 minutes Scree will enter sleep if there is no operation after 30 minutes By default USB Upgrade Port Technical Data 1. Download the new firmware into U disk from official website http://www.godox.com.cn/Downloads.html. 2. Turn off the LED light. Insert the U disk with new firmware into the USB upgrade port. 3. Turn on the LED light, and it will automatically enter the upgrading interface. 4. The LED light will automatically back to the main interface. Note: 1. The newest firmware must be downloaded from the official website and stored in the root directory of U disk. And there can only be one BIN document. 2. The USB port can only support firmware upgrade function. Model Output Power Power Supply LD75R 75W LD150R 150W AC Power Supply 110~240V 50/60Hz 26V LD150RS 150W 26V V-port Battery(optional) 14.8V 15100 18200 Color Temperature 2500K~8500K Channel(CH) 32 1~32 748*430*107.5mm 542*513*107.5mm Group(GR) 16 A,B,C,D,E,F/0~9 6.3kg 5.1kg ID FX Mode 99OFF/01~99 14 Categories (39 kinds) Brightness Range 0%~100%
Tone Range Hue Range
-50 ~ 0 ~ +50 0-360 Saturation Range 0%-100%
Beam Angle Silent Mode 60 Yes 100% Illuminance(LUX) Max. 9320
(darkroom, 1-meter distance) 96 CRI TLCI 97 Smartphone APP/2.4G wireless remote control/DMX control/operate panel Control Method 30m Bluetooth Transmission Distance 50m 2.4G Wireless Transmission Distance
-10~40 Working Temperature 441*410*107.5mm Dimension Net Weight 3.5Kg
* Product design and specifications are subject to change without notice.
- 17 -
- 18 -
Troubleshooting FCC Statement If icon appeared and blinking and icon is also appeared on the display:
It might be the fan failure. Please contact with customer service. If icon appeared and blinking and icon is also appeared on the display:
(1) If the icons are displayed in cool-light state (just being turned on or for a little while), it might be probe failure. Please contact with customer service.
(2) If the icons are displayed in hot-light state (being turned on for a long while), it might be caused by long-time usage and over temperature. Please turn off the light and turn it on after the light is cooled down. Maintenance This product, except consumables e.g. adapter and power cable, is supported with a one-year warranty. Maintenance of the flash must be performed by our authorized maintenance department which can provide original accessories. Unauthorized service will void the warranty. If the product had failures or was wetted, do not use it until it is repaired by professionals. If there is anything abnormal during LED lights working, please turn it off immediately and identify the reasons. Changes made to the specifications or designs may not be reflected in this manual. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. QCPASS
- 19 -
- 20 -
() 12 3 12 0755-29609320-8062 Warranty Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safekeep it. Thank you!
Product Information Customer Information Model Product Code Number Name Contact Number Address Seller Information Name Contact Number Address Date of Sale Note:
Note: This form shall be sealed by the seller. Applicable Products The document applies to the products listed on the Product Maintenance lnformation
(see below for further information). Other products or accessories (e.g. promotional items,giveaways and additional accessories attached,etc.) are notincluded in this warranty scope. Warranty Period The warranty period of products and accessories isimplemented according to the relevant Product Maintenancelnformation. The warranty period is calculated from the day(purchase date) when the product is bought for the first time,And the purchase date is considered as the date registered onthe warranty card when buying the product. How to Get the Maintenance Service If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid wananty card. If you cannot provide valid warranty card, we may offer you maintenance service once conrmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation. Inapplicable Cases The guarantee and service offered by this document are not applicable in the following cases: . The product or accessory has expired its warranty period; . Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, ooding and damp environments, etc; . Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment; . The original identifying information of product or accessory is modied, alternated, or removed; . No valid warranty card; . Breakage or damage caused by using illegally authorized, nonstandard or non-public released software; . Breakage or damage caused by force majeure or accident; . Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope. Maintenance and Service Support Information The warranty period and service types of products are implemented according to the following Product Maintenance Information:
Product Type Parts Name Circuit Board Battery Other Items Electrical parts e.g.battery charger, power cord, sync cable, etc. Flash tube, modeling lamp, lamp body, lamp cover, lockingdevice, package, etc. Maintenance Period(month) 12 3 12 No Warranty Service Type Customer sends the product to designated site Customer sends the product to designated site Customer sends the product to designated site Without warranty Godox After-sale Service Call 0755-29609320-8062