FCC ID: 2ABYN057 LED Video Light

LED Video Light

Instruction Manual

BRIGHTNES S

VL150II

5600K

lux fc lux fc 6100 570 76000 7000 1700 160 16000 1500 810 76.0 5400 500 VL200II

5600K

lux fc lux fc 7400 700 88900 8300 2100 190 19000 180 1100 100 8000 750 VL300II

5600K

11600 1100 90000 8400 3500 300 20900 1950 1700 160 8800 820

lux fc lux fc

Safety Instructions and Attentions First of all, as the most basic principle: This product is a professional lighting set equipment and should be used by professional lighting engineers or under the guidance of professionals. Basic safety attentions must always be followed during use, as follows:

1. 2. Before use, please read and understand these instructions and attentions. Professional lighting is prohibited for children. When children are near, parents or accompanying persons must supervise closely to prevent children from personal injury due to collision with lamps or private use of lamps. This lighting product is not ordinary lighting product and cannot be used for general 3. lighting. Anyone who has suffered eye damage or has sensitive eyes should avoid using this product. 4. When the lamp is on, it must be used with care. Do not touch high-temperature parts, such as LED lamp beads, to avoid burns. 5. When the lamp is on, it is forbidden to look directly at the lamp beads under any circumstances. Strong light should be used under the guidance of professional lighting engineers. Avoid prolonged exposure to strong light under any circumstances. If eye discomfort, please turn off the lamp in time, suspend use, and see a doctor immediately. 6. If the lamp bead is damaged or deformed by heat, stop using this equipment, and

7. the lamp bead in time to avoid accidents. This product is only suitable for use in -10to 40operating environment and normal humidity environment. 8. Do not use damaged equipment or accessories, and wait for professional maintenance

9. During using, if the casing of this product is broken due to being dropped, squeezed or subjected to strong impact, please do not use it, so as to avoid electric shock injury due to contact with internal electronic components. 10. If an extension cord is required, please use an extension cord with a current rating greater than or equal to that of the equipment. If an extension cord is rated less than the equipment, overheating may result. 11. Some products have long power cords, please place the power cords properly and keep them in a safe place. Avoid contacting the power cord with overheating surfaces, avoid improper placement that could cause pulling damage, or trip on-site personnel.

12. Be sure to unplug equipment from the power outlet before cleaning and repairing. When not in use, do not pull the power cord to unplug the equipment. For normal power-off, please hold both ends of the plug of the equipment with your hands and pull the plug out of power outlet. This equipment needs to be connected to a grounded outlet. 13. This equipment is not waterproof, please keep it dry and do not immerse it in water or other liquids. The equipment should be installed in a dry and ventilated place, and avoid using it in rainy, humid, dusty or overheated environments. Do not place any objects on the lamp or let liquid flow into the lamp to avoid accidents. Do not disassemble the product without permission. If the product fails, it must be 14. checked and repaired by authorized maintenance personnel. 15. Before storing, make sure that the equipment has cooled down completely. For storage, unplug the power cord from the equipment. The equipment should be placed in the carrying case or in a ventilated dry place. 16. Do not place equipment near flammable and volatile solvents such as alcohol and gasoline. 17.

shock or personal injury. 18. When cleaning, do not wipe it with a damp cloth, please use a dry cloth or a soft cloth to wipe the dirt of the equipment. 19. 20. Please take off the protective cover before using. This product complies with ROHS,CE national standards for use and operation. 21. The safety instructions are formulated according to the strict testing of the factory,

prior notice. For latest product information, please check the GODOX website and view latest electronic instruction. 22.

correct operating instructions. 23. Some products are battery powered. Do not use any batteries, power sources or

other accessories out of the reach of children and infants. In the instance that a child or infant swallows a battery or accessory, immediate emergency medical attention is required. If the battery leaks, becomes discolored, deformed, emits smoke, or emits an abnormal odor, remove it immediately. Be careful during removal to avoid burns.

the positive and negative ends of batteries, or mix old and new batteries or batteries of different types together. 24. One-year warranty period, accessories such as consumable batteries, adapters, power cords, etc. are not covered by this warranty. 25. If it is found that the equipment is repaired without authorization, the one-year warranty period will be cancelled and relevant fees will be charged for maintenance. 26. Machine failures caused by non-standard operation are not covered by the warranty. keep these instructions!

Foreword Thank you for purchasing this Godox Product!

strong power, stable light source, ultra-high CRI and powerful performance, quite suitable for shooting scenes such as children photography, studio shooting, interview lighting, still life shooting and video shooting. It supports Bluetooth remote control through "Godox Light" APP, and wireless brightness adjustment through optional Godox RC-A6 remote control. Please read this manual carefully before using to make sure the correct operation and exert the optimum function. Main Feature

Compact structure, lightweight and portable

Support 2.4GHz wireless control and Bluetooth control

Strong power and stable light source, brightness adjustable from 0% to 100%

DC power supply or V-port lithium battery power supply, support both indoor and outdoor using

8 customed light effects and convenient operation

VL150II and VL200II have 360 U-type bracket, standard Bowens mount and umbrella hole

Attached carry bag makes it conveniently portable.

Warning Do not look directly at the light source. The luminaire is intended for professional use only. Keep out of reach of children. Please take off the lamp cover before using. Do not leave or store the product if the ambient temperature reads over 40C.

Please use the original power cable, damages caused by using other cables will invalid the warranty. As this product do not have waterproof function, please take measures of waterproof in rainy or damp environment. Always keep this product dry. Do not use in rain or in damp conditions. Do not use the product in the presence of flammable gases, chemicals and other similar materials. The light source contained in this luminaire shall only be replaced by the manufacturer

Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center. The lamp shall be changed if it has become damaged or thermally deformed.

Structure of Product VL150II Light Body

Accessory Locking Ring

Bowens Mount

LED Beads

Thermovent

Bracket Locking Ring

Bracket Sleeve Ring

Umbrella Input Handle Thermovent

Power Input Socket

U-type Bracket

Bracket Sleeve

VL150II Controller

Handle

LCD Panel

FX/Wireless Button

Adjust Dial

Power Switch VL200II/VL300II Controller

V-port Battery Slot Battery Compartment Battery Locking Ring DC Input Port

DC Output Port

Handle

LCD Panel

FX/Wireless Button

Power Switch

Adjust Dial

Battery Locking Ring V-port Battery Slot Battery Compartment DC Input Port

DC Output Port

Included Items Model VL150II Included Items VL150II*1, Controller VLC150II*1, Reflector *1, Lamp cover *1, Connect cord*1, Adapter *1, Power cord *1, Back clip *1, Instruction Manual*1, Carry Bag CB62*1 VL200II VL200II *1, Controller VLC200II*1, Reflector *1, Lamp cover *1, Connect cord*1, Adapter *1, Power cord *1, Back clip *1, Instruction Manual*1, VL300II Carry Bag CB63*1 VL300II*1, Controller VLC300II*1, Reflector *1, Lamp cover *1, Connect cord*1, Adapter *1, Power cord *1, Back clip *1, Instruction Manual*1, Carry Bag CB64*1 Light bodyVL150II/VL200II/VL300II Controller VLC150II Controller VLC200II/VLC300II Reflector Lamp cover Connect cord Adapter Power cord Back clip Instruction Manual Carry Bag Instruction Manual

Operation Instruction 1. Power on/off Connect the adapter and controller, long press the Power Switch to power the LED light on or off. 2. Mode selection: Constant on mode/FX mode Constant on mode: The main interface is constant on

mode, while the FX icon is not displayed on the left bottom of panel. Turn the adjust dial for light brightness to change the value from 0% to 100%. FX mode: Long press FX/ wireless button to make the FX displayed on the left bottom of panel, it is FX icon mode.

When the FX icon flashes, turn the adjust dial to select among the 8 light effects, then

can reselect the light effect. Light effects table (8 types) Display FX1 FX2 FX3 FX4 FX5 FX6 FX7 Scenes Flash 1 Flash 2 Flash Storm 1 Storm 2 Storm 3 Broken bulb FX8 TV When the FX icon stops flashing, turn the adjust dial for light brightness to change the value from 0% to 100%. BRIGHTNES S 3. 2.4GHz wireless setting CH setting: Short press the FX/wireless button once to make

the CH icon flashes, then turn the adjust dial to choose among 01 to 32 channels. When the CH icon stops flashing, it means CH setting completed and automatically exited, while the CH icon flashes means short pressing FX/wireless button 4 times can also automatically exit CH setting.

GR setting: Short press the FX/wireless button twice to make the GR icon flashes, then turn the adjust dial

to choose among A to F or 0 to 9 groups. When the GR icon stops flashing, it means GR setting completed and automatically exited, while the GR icon flashes means short pressing FX/wireless button 3 times can also automatically exit GR setting. ID setting: Short press the FX/wireless button three times to make the ID icon flashes, then turn the adjust dial to

choose among 01 to 99 IDs. When the ID icon stops flashing, it means ID setting completed and automatically exited, while the ID icon flashes means short pressing FX/

wireless button twice can also automatically exit ID setting. 4. Power option(VL300II) Press the power switch and FX/wireless button at the same time in power off status to enter power option mode. Turn the adjust dial to choose power from 200, 250 and 300. The power is 300W by default. It will exit from this mode automatically without operation for 5 seconds.

5. Bluetooth control Check Bluetooth MAC code Check Bluetooth MAC code Short press the FX/wireless button four times to make the Bluetooth icon and MAC code displayed, it is in Bluetooth setting interface. Bluetooth reset Long press the FX/wireless button in Bluetooth setting interface to make the Bluetooth icon flashes, it means the Bluetooth is resetting. When the Bluetooth icon stops flashing means Bluetooth resetting is completed. It will exit from this mode automatically without operation for 10 seconds, short press the FX/wireless button to exit is also available.

APP download Scan the QR code to download the "Godox Light" mobile app. (It can be used on both Android and Apple systems)

the mobile APP, which contains detailed tutorials.

Illuminance data VL150II CCT Testing Conditions 1m 2m 3m 5600K bare lamp with reflector 6100 570 76000 7000 1700 160 16000 1500 810 76.0 5400 500 CCT Testing Conditions 1m 2m 3m 5600K bare lamp with reflector 7400 700 88900 8300 2100 190 19000 180 1100 100 8000 750 CCT Testing Conditions 1m 2m 3m 5600K bare lamp with reflector 11600 1100 90000 8400 3500 300 20900 1950 1700 160 8800 820

* All the above tests are based on the condition of 100%brightness.

Illuminance Unit lux fc lux fc VL200II Illuminance Unit lux fc lux fc VL300II Illuminance Unit lux fc lux fc Technical Data Model VL150II Adapter Input AC100V-240V 50/60Hz 2A Light Body Input 35V 4.3A VL200II AC100V-240V 50/60Hz 3.9A 47.8V 4.2A VL300II AC100V-240V 50/60Hz 4.3A 50V 6A V-port battery Standard voltage:14.8V (optional) Max. Power 180W 230W 330W CCT Range CH GR ID CRI TLCI Brightness Adjustment Range Working Temperature Range 5600200K 32 16A,B,C,D,E,F,0-9 99

0 -100

-10 -40 U-type Bracket 0-360 0-360 0-290 Adjustable Angle Dimensions

Light Body 270mm*175mm*212mm Controller 114mm*59mm*258mm Light Body1.72kg Controller0.7kg Light Body 270mm*175mm*212mm Controller 60mm*114mm*426mm Light Body1.77kg Controller1.19kg Light Body 272mm*176mm*292mm Controller 60mm*114mm*426mm Light Body2.78kg Controller1.2kg

FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation

compliance could void the user's authority to operate the equipment Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body 2.4G RF module frequency: 2412-2464.5MHz

Warning Operating frequency: 2402MHz-2480MHz Maximum EIRP Power: 5dBm Declaration of Conformity GODOX Photo Equipment Co.,Ltd. hereby declares that this equipment are in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states.For more information of DoC, Please click this web link:https://www. godox.com/DOC/Godox_VLII_Series_DOC.pdf. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body.

Warranty

keep it. Thank you!

Product Information Model Product Code Number Name Address Contact Number Name Contact Number Address Date of Sale Customer Information Seller Information Note Note: This form shall be sealed by the seller. Applicable Products The document applies to the products listed on the Product Maintenance lnformation

(see below for further information). Other products or accessories (e.g. promotional items, giveaways and additional accessories attached, etc.) are not included in this warranty scope. Warranty Period The warranty period of products and accessories is implemented according to the relevant Product Maintenance lnformation. The warranty period is calculated from the day(purchase

the date registered onthe warranty card when buying the product. How to Get the Maintenance Service If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance

but that shall not be considered as our obligation. Inapplicable Cases The guarantee and service offered by this document are not applicable in the following cases: The product or accessory has expired its warranty period; .Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc; . Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment; alternated, or removed; No valid warranty card; Breakage or damage caused by using illegally authorized, nonstandard or non-public released software; Breakage or damage caused by force majeure or accident; Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope. Maintenance and Service Support Information The warranty period and service types of products are implemented according to the following Product Maintenance Information:

Product Name Maintenance Warranty Service Type Type Parts Other Items Circuit Board Battery Electrical parts e.g.battery charger, power cord, sync cable, etc. Period(month) 12 3 12 Customer sends the product to designated site Customer sends the product to designated site Customer sends the product to designated site Flash tube, modeling No Without warranty lamp, lamp body, lamp cover, locking device, package, etc. Godox After-sale Service Call 0755-29609320-8062 Wechat

GODOX Photo Equipment Co.,Ltd. Add.:Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao'an District, Shenzhen 518103,China Tel:+86-755-29609320(8062) Fax:+86-755-25723423 E-mail:godox@godox.com www.godox.com Made in China 705-VL1520-00

5266091_X10_Ed.2

< GODOX PHOTO EQUIPMENT CO.LTD >

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 28/07/2022 Subject: Request for Confidentiality FCC ID: 2ABYNO57 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFRO.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Short-Term Confidentiality | Confidentiality "OT 2 ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Eyert Internal Photos overs?

Parts List / Tune Up / BOM List RF Exposure Info Operational Description Cover Letter(s) FCC Software Security Requirements for UNII devices oOoOwRWoOoOo OOO0OwRWoOoOORoOoO ooWooO NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See ll. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of _180_ days from the date of the Grant of Equipment Authorization and prior to marketing. ri 5266091_X10_Ed.2 It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Pongo. Ww

-O/.2Y Name: HONGWU WEN aaa |

Title: Manager ri

C5266091_X8_Ed.1 Letter of Authorization

< GODOX PHOTO EQUIPMENT CO.LTD >

Company: GODOX PHOTO EQUIPMENT CO.LTD Address: ist to 4th Floor, Building 2/1st to 4th Floor, Building 4 ,Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Baoan District, Shenzhen, 518103 China Product Name: LED Video Light Model Number: VL15011, VLC150I1(Controller) FCC Identifier: 2ABYNO57 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: HONGWU WEN Date: 28/07/2022 Title: Manager Signature of applicant: He ge wa WOM, 22. ]. |

ai

GODOX PHOTO EQUIPMENT CO.LTD Ast to 4th Floor, Building 2/1st to 4th Floor, Building 4 ,Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Baoan District, Shenzhen, 518103 China Date: 7/28/2022 FCC ID: 2ABYN057 Model Number: VL15011, VLC15011(Controller) To:

Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, GODOX PHOTO EQUIPMENT CO.LTD declare that this EUT (FCC ID: 2ABYN057) will conduct FCC compliance testing, the sDOC part recognized test lab(Shenzhen NTEK Testing Technology Co., Ltd.). 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Baoan District, Shenzhen 518126 P.R. China Please contact me if you have any question. Sincerely,

(Signed) Hong wr wer neo]: >) Name / Title: HONGWU WEN / Manager Company: GODOX PHOTO EQUIPMENT CO.LTD Address: 1st to 4th Floor, Building 2/1st to 4th Floor, Building 4 ,Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Baoan District, Shenzhen, 518103 China Phone: +86-755-25737526-801 Email: whw@godox.com