GODOX MoveLink M2 705-MLM200-00
(mm) 80x100mm 2mm A
105g Follow Wechat Public Account QC PASS MoveLink MoveLink 2.4GHz wireless microphone system
: 2
: +86-755-29609320(8062) : +86-755-25723423 : godox@godox.com GODOX Photo Equipment Co., Ltd. Add: Building 2, Yaochuan Industrial Zone,Tangwei Community, Fuhai Street, Baoan District, Shenzhen 518103, China Tel: +86-755-29609320(8062) Fax: +86-755-25723423 E-mail: godox@godox.com godox.com Made In China
| Instruction Manual 2.4GHzMoveLink2.4G 2.4GHz WIFIWIFI 50m OLED 3.5mm
USB Type-C MoveLink 40 1 2 TX 1. 2. 3.5mm 3.
4. 5. 6. 7. OLED 8. USB Type-C RX 1. 3.5mm 2. 3.5mm TRS 3.
4.
5. 6. 7. OLED 8. USB Type-C 1 2 3 4 3 4 5 6 7 8 5 6 7 8 TX 1.OLED A A 2. 1 2 3 4 5
/USB Type-C
3.5mm3.5mm
, USB Type-CUSB Type-C 3.
RX 1.OLED A B A/B A/B A/B 1
-stereo 2 5 8
-A C. A B D. USB Type-C USB Type-C 3.
3.5mm TRS-TRS 3 4 6 7 2. A. /
USB Type-C B.
(1) +/- A/B
/ +/- A/B
(2)
(3)
(4) A /B /
3
/ + A/B
- A/B 16 -5dB ~ 10dB 1. LINE IN LINE OUT 2. 1 A B
, 2 A AB B
, 3.5mm TRS-TRS 3.5mm TRS-TRRS USB Typc-C MoveLink USB Typc-C MoveLink MoveLink M1 =TX+RX
+ + + + 2 + +
MoveLink M2 =TX+TX+RX 2 + 2 + + + 2 + + + +
1. MoveLink USB Type-C 1 1 MoveLink MoveLink /
3.5mm TRS-TRS 3.5mm TRS-TRRS
() MoveLink M1 MoveLink M2 MoveLink RX TX
() OLED 2.4GHz 21.8dB(A) 50Hz-20KHz
+3dBu MoveLink A. USB Type-C B. MoveLink SPL 70dB 100dBA() 50()
-32dB+/-2dB 120DB 6H 300mHa 3.5mmTES 3.5mmTES
-10~50 50mm 40mm 14mm 27g MoveLinkML-C3 ABS MoveLink TX MoveLink RX USB Type-C 163mm 66mm 28mm 129g
() 12 3 12 0755-29609320-8062 Forward Thank you for purchasing Godox MoveLink 2.4GHz wireless microphone system. These products are suitable for video recording, journalistic shooting, audio record-
ing, etc. Please read this manual carefully before using to make sure the correct operation and exert the optimum function. Features Adopt globally accepted 2.4GHz wireless and frequency-hopping technology to avoid same frequency disturbance, which can be used in WIFI and Bluetooth simultaneously (may be influenced in occasions with multiple WIFI nodes) Clear, stable and lossless sound quality The maximum wireless distance up to 50m With OLED display to show the parameters setting Support 3.5mm Earphone real-time monitoring With output volume control and silence function Stable match of transmitting and receiving Supports two-way transmitting and one-way receiving Freely switch mono or stereo channel to offer more output options Two lithium battery charging methods through USB port or MoveLink charging case Warning Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center. Always keep this product dry. Do not use in rain or in damp conditions. Keep out of reach of children. Do not use the flash unit in the presence of flammable gas. In certain circum-
stance, please pay attention to the relevant warnings. Do not leave or store the product if the ambient temperature reads over 40 Turn off the devices immediately in the event of malfunction. Names of Parts Transmitter (TX) 1. Built-in Microphone 2. 3.5mm Audio Port 3. Power Switch Button 4. Silent Button 5. Working Indicator 6. Pairing Button 7. OLED Display 8. USB Type-C Port 1 2 3 4 5 6 7 8 Receiver (RX) 1. 3.5mm Audio Sync Monitoring Port 2. 3.5mm TRS Audio Output Port 3. Power Switch/Switch Volume Setting Button 4. Sound +/-
5. Pairing Button 6. Working Indicator 7.OLED Display 8. USB Type-C Port 1 2 3 4 5 6 7 8 Functions and Operation Transmitter (TX) 1. OLED Display Icon 1: connecting channel. A means connect-
ing to A channel. Icon 2: connecting state. The icon on the picture means connected state. Icon 3: battery level. Icon 4: recording and silent icon. The icon on the picture means recording state. Icon 5: soundbyte indication. 1 2 3 4 5 2. Function Introduction Power switch: long press the power switch to power on or off. In the state of power-on, if there is USB Type-C Cable inserted, long press the power switch to enter standby state and the charging animation will be displayed. In standby state, long press the power switch to power on. Short press the silent button to switch on or off silent mode. Long press the pairing button to match the receiver. The indicator will light blue when successfully matched. Charge the products through USB Type-C port directly. The charging anima-
tion will be displayed in charging. 3. Installation Method Using built-in microphone:
Install the transmitter on the collar through the back clip, aiming the built-in microphone towards the sound source direction. For achieving better invisibility during the usage, it is recommended to fix the back clip towards the outside. Back Clip Built-in Microphone Using External Microphone:
Insert the 3.5mm lavalier microphone into the transmitter s 3.5mm audio port and lock it tightly. Clip the transmitter onto the belt by back clip and clip the lavalier microphone on the other end onto the collar. When using the external microphone, the built-in microphone will be atomically turned off. Receiver (RX) 1. OLED Screen Displa Icon 1 Icon 2 Icon 3 Icon 4 Icon 5 Icon 6 Icon 7 Icon 8 A channel transmitters battery level B channel transmitters battery level Sound channel selection display A/B channels volume adjustment display A/B channels soundbyte dynamic display Connection or disconnection of A/B channel Sound volume adjustment interface Pairing interface 2. Function Introduction A. Power Switch: long press the power switch to power on or off. In the state of power-on, if there is USB Type-C inserted, long press the power switch to enter standby state and the charging animation will be displayed. In standby state, long press the power switch to power on. B. Volume Adjustment:
(1) In dual sound setting mode, short press the sound +/-button to increase or decrease the A/B transmitter s sound volume simultane-
ouslylong press the sound +/-button to increase or decrease the A/B transmitters sound volume gradually.
(2) Switch Channel: Short press the power switch button to separately adjust the volume of A channel, B channel and A&B dual channel. The channel with blinking figures can be adjusted volumes and will be switched to dual channel adjustment if there are no operations after 3 seconds.
(3) In mono channel mode setting, short press or long press the volume + to increase the channel s volume gradually. If one of the transmitter s volumes is up to maximum, the current volume slider can only be displayed instead of being controlledshort press or long press the volume - to decrease the channel s volume gradually. If one of the transmitters volumes is up to minimum, the current volume slider can only be displayed instead of being controlled.
(4) There are 16 levels of volume adjustment: 00db-15db. C. Long press the pairing button to match the singles of transmitters. The left channel will automatically receive A transmitter s singles while the right channel will receive B transmitter s. Short press the pairing button to select mono channel and stereo channel. 1
-stereo 2 5 8
-A D. Charge the products through USB Type-C port directly. The charging animation will be displayed in charging. 3 4 6 7 3. Installation Method Installation Methods When Attaching to Camera:
Install the receiver onto the camera s hotshot and tighten it through the back clip. Then, connect the receiver with the camera by 3.5mm TRS-TRS audio Connect cable. Insert the earphone into the earphones monitoring port to listen.
(2) Receiver In standby state, the indicator will be off. In boot-up state, the indicator will be orange in non-connection, be blue in connec-
tion to A channel and be cyan in connection to AB or B channel. During the pairing, the indicator will blink in red for two times circularly. Whats Inside Wind Cap Connect Cable (For Camera) Smartphone) USB Type-C Cable Maintenance Instruction Manual Omnidirectional Lavalier Microphone 3.5mm TRS-TRS Audio 3.5mm TRS-TRRS Audio Connect Cable (For MoveLink Charging Case Hand Strap Port and Indicator 1. Ports:
Transmitter LINE IN: audio singles input Receiver LINE IN: audio singles output Receiver audio sync receiving port: insert the earphone cable into monitoring port 2. Indicator:
Working indicator: the indicator will display green in normal working state.
(1) Transmitter In standby state, the indicator will be off. In boot-up state, the indicator will be orange in non-connection, be blue in connec-
tion to A channel and be cyan in connection to AB or B channel. During the pairing, the indicator will blink in red for two times circularly. Wind Cap Omnidirectional Lavalier Microphone 3.5mm TRS-TRS Audio Connect Cable
(For Camera) 3.5mm TRS-TRRS Audio Connect Cable
(For Smartphone) USB Type-C Cable MoveLink Charging Case Hand Strap Instruction Manual Maintenance MoveLink M1 =TX+RX
MoveLink M2 =TX+TX+RX 2 + 2 + + + 2 + + + +
Optional Accessory 1. MoveLink Charging Case (Include USB Type-C Cable and a hand strap) There are three charging bases in MoveLink, which can charge three transmitters or receivers of MoveLink system after being connected to power supply. N o t e : M o v e L i n k M 1 d o n o t include MoveLink Charging Case while MoveLink M1 includes a MoveLink Charging Case. MoveLink Charging Case Schematic Diagram of Charging The indicator will display yellow during the charging process and turn to green when being fully charged. Charging Indicator Charging Port MoveLink system has two charging ways:
A. being charged from USB Type-C cable;
B. being charged through MoveLink Charging Case. Technique Data Name Fixing Method Display Receiver RX Transmitter TX Back clip (installed onto camera s hotshoe ) OLED Display Transmission Type 2.4GHz Frequency hopping system Sound Pick-up Mode Omnidirectional Equivalent Input Noise Level 21.8dBA weighting Frequency Range 50Hz-20KHz Max. Output Electrical Level
+3dBu Single to Noise Ratio 70dB or higher Sensitivity Max. SPL Dynamic Range Working Range Power Supply Battery Life Battery Capacity Simulated Input Simulated Output
-32dB+/-2dB 120DB 100dBA (microphone preamplifier) 50m (in no shelter situation) Built-in lithium battery Approx. 6H 300mHa 3.5mmTES 3.5mmTES Lavalier microphone input Working Environment Temperature
-10~50 Dimension Weight Length 50mm width 40mm thickness14mm 27g Name Material Suitable Models Charging Input Dimension Weight MoveLink Charging Case ML-C3 ABS Material MoveLink TXMoveLink RX USB Type-C Length 163 Width 66 Thickness 28 129g Troubleshooting Unable to receive audio signal. Make sure batteries are installed correctly and Power Switch is turned on. Check if the transmitter and the receiver are set to the same channel, if the microphone or earphone is well connected, or if the devices are set to the correct mode. Check if the transmitter is set to silent mode or not. Signal disturbance or shooting interference. Change a different channel of the transmitter and receiver. Operation audio distance limited or signal missing. Check if batteries are exhausted. If so, replace them. Maintenance Avoid sudden drops. The device may fail to work after strong shocks, impacts, or excess stress. Keep dry. The product isn t water-proof. Malfunction, rust, and corrosion may occur and go beyond repair if soaked in water or exposed to high humidity. Avoid sudden temperature changes. Condensation happens if sudden temperature changes such as the circumstance when taking the product out of a building with higher temperature to outside in winter. Please put the product in a handbag or plastic bag beforehand. Keep away from strong magnetic field. The strong static or magnetic field produced by devices such as radio transmitters leads to malfunction. Changes made to the specifications or designs may not be reflected in this manual. Warranty Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe-keep it. Thank you!
Product Information Model Product Code Number Name Contact Number Customer Information Address Name Contact Number Seller Information Address Note Date of Sale Note: This form shall be sealed by the seller. Applicable Products The document applies to the products listed on the Product Maintenance lnformation
(see below for further information). Other products or accessories (e.g. promotional items,giveaways and additional accessories attached,etc.) are not included in this warranty scope. Warranty Period The warranty period of products and accessories isimplemented according to the relevant Product Maintenancelnformation. The warranty period is calculated from the day(purchase date) when the product is bought for the first time,And the purchase date is considered as the date registered onthe warranty card when buying the product. How to Get the Maintenance Service If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation. Inapplicable Cases The guarantee and service offered by this document are not applicable in the following cases: . The product or accessory has expired its warranty period;
. Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contact-
ing or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc; . Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment; . The original identifying information of product or accessory is modified, alternated, or removed; . No valid warranty card; . Breakage or damage caused by using illegally authorized, nonstandard or non-public released software; . Breakage or damage caused by force majeure or accident; . Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope. Maintenance and Service Support Information The warranty period and service types of products are implemented according to the following Product Maintenance Information:
Product Type Name Parts Product Main Body Battery Charger, Power Cable,Sync Cable, Electrical Parts etc. Battery Case, Windproof Sponge, Wind Cap, Locking Device, Lanyard, Tie, Velcro Tape, Clip, Bag, Package etc. Other Items Maintenance Period(month) Warranty Service Type 12 3 12 No Customer sends the product to designated site Customer sends the product to designated site Customer sends the product to designated site Without warranty Godox After-sale Service Call 0755-29609320-8062 FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction