User Manual Model: RC-A6 FCC ID: 2ABYN007 Remote control parts:
01. LCD screen (black text on white background) 02. Power button 03. CH/GR button 04. SET button 05. Down button 06. Up button 07. Battery slot 08. Battery cover Remote control channel / group adjustment In the normal state, press the CH / GR button, the group flashes at this time, press the "-" "+" button to select the group (A ~ F, 0-9);
In the normal state, press the CH / GR button twice, and the channel flashes at this time. Press the "-" "+" buttons to select the channel (1 ~ 32);
In the normal state, double-click the CH / GR button and press the "-" "+"
button to select the ID number (ID number is OFF, 0-99);
Remote control brightness parameter adjustment In the normal state, press the "-" "+" button to adjust the brightness. Remote control color temperature parameter adjustment;
In the normal state, press the SET button, and the color temperature value blinks. Press the "-" "+" button to adjust the color temperature. Note: The controller can receive wireless signals only when the controller is on. FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
* RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.