FCC ID: 2ABYN036 SL Series LED Video Light

0 0

0 D 0 1 L S

5 0 7 SL SL Series LED Video Light QCPASS

: 2

: 0755-29609320(8062) : 0755-25723423 : godox@godox.com GODOX Photo Equipment Co., Ltd. Add: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Baoan District, Shenzhen, China Tel: +86-755-29609320(8062) Fax: +86-755-25723423 E-mail: godox@godox.com godox.com Made in China Instruction Manual Foreword Thank you for purchasing Godox product!

SL Series LED Video Light SL100D is suitable for live recording, video shooting and many other occasions with stable light resource and even illumination. Name of Body Light Head Features:

With stable light source and adjustable light brightness from 0% to 100%

Can be remote controlled by 2.4G and smartphone APP With 8 Fx special effects mode to simulate various of shooting scenes Bowens-mount support various of accessories Clear LCD display With excellent heat dissipation Warning When using your photographic equipment, basic safety precautions should always be followed, including the following:

Read and understand all instructions before using. Close supervision is necessary when any appliance is used by or near children. Do not leave appliance unattended while in use. Care must be taken as burns can occur from touching hot parts. Do not operate appliance with a damaged cord or if the appliance has been dropped or damaged until it has been examined by a qualified serviceman. Position the cord so that it will not be tripped over, pulled, or contact hot surfaces. If an extension cord is necessary, a cord with a current rating at least equal to that of the appliance should be used. Cords rated for less amperage than the appliance may overheat. Always unplug appliance from electrical outlet before cleaning and servicing and when not in use. Never yank cord to pull plug from outlet. Grasp plug and pull to disconnect. This appliance is not waterproof device. To reduce the risk of electric shock, do not immerse this appliance in water or other liquids. Do not disassemble. Should repairs become necessary, this appliance must be sent to an authorized maintenance center.Incorrect maintenance behavior may cause electric shock when the appliance is subsequently used. When this appliance is working,please do not cover the Thermovent,and please do not look directly at or touch the COB lamp beads under any circumstances. 01.Light Body 02.LED Beads 03.Protect Cover 04.Bowens-mount 05.Accessory Locking Ring 06.Reflector 07.Umbrella Input 08.Direction Adjust 09.Bracket 10.Thermovent 11.Air Inlet 12.Handle 13.Display 14.DIM Dial 15.FX Dial 16.FX Button 17.GR Button 18.CH Button 19.Bluetooth 20.Power On/Off 21.Power Jack

- 09 -

- 10 -

LCD Panel Optional Accessories The product can be used in combination with the following accessories sold separately, so as to achieve best photography effects: RC-A6 Remote Control, Power Inverter, Softbox, Photographic Umbrella, Light Stand, Honey Comb, Beauty Dish, Snoot, etc. Channel ID Bluetooth Group Light Effects Power/Brightness Color Temperature Whats in the Box Power Source Connect the LED light to power source with power cable. Then, press the power switch to turn it on off. Reflector *1 Protection Cover *1 Light Body *1 Power Cord *1 Instruction Manual *1 Operation Brightness Adjustment: turn the DIM dial to adjust brightness from 0% to 100%. Turn the FX dial to decrease the value while rightwards to increase.And adjust 1 value in normal operation while 10 values in quick operation.

- 11 -

- 12 -

Light Effects Mode Short press the FX button to enter or exit the special effects. When entering the FX modes, FX icon will be displayed on the LCD panel. Then, turn the FX dial to choose one mode from the 8 special effects modes to achieve creative shooting. Display FX1 FX2 FX3 FX4 FX5 FX6 FX7 FX8 Scene Flash Flash Flash Storm Storm Storm TV Broken 1 1 2 2 3 3 2.4G Wireless Setting With 2.4G wireless system, LED Video Light SL100D has receive and control function. Up to 16 groups of LED lights can be controlled. 32 channels and 99 wireless IDs are available with strong anti-interference capability. Please set the channels, groups and IDs of LED light to the same as those of RC-A6 remote control (optional) before usage. CH Channel adjustment: short press CH button and the CH values will be blinking on the display. Turn the DIM dial on the right to adjust channels from 1 to 32. Turn the select dial leftwards to decrease the value while rightwards to increase. Short press the CH button again to exit from CH setting.

- 13 -

GR Group adjustment: short press GR button and the GR values will be blinking on the display. Turn the DIM dial on the right to adjust groups from 0 to 9 and A to F. Turn the select dial leftwards to decrease the value while rightwards to increase. Short press the GR Button again to exit from GR setting. ID Setting: long press the CH and GR button together until the ID values is blinking on the display. Turn the DIM dial on the right to adjust IDs from OFF and 1 to 99. Turn the select dial leftwards to decrease the value while rightwards to increase. Then, long press CH and GR button to exit from ID setting. Bluetooth Setting 1. Bluetooth MAC code checking: short press the Bluetooth button until Bluetooth MAC code is displayed. Press the Bluetooth button again and the MAC code will disappear. And the code will be displayed after returning to the main interface. 2. Scan the QR code to download the GodoxLight smartphone APP(can be used in Android and Apple). For more smartphone APP operations, please open the help in APP to gain detailed guidance. 3. Bluetooth reset function: long press the SET button for 2 seconds and the Bluetooth icon will blink because of resetting. And the icon will stop blinking after being successfully reset. Note: The APP can be used directly on the firstly installed device (smartphone or iPad). When change to other mobile device (smartphone or iPad), the light shall be reset before the normal connection of APP.

- 14 -

Failures Reminder Maintenance lighting indicates fan failure, flashing indicates failure. with a one-year warranty. lighting indicates high temperature alarm, flashing indicates high temperature Avoid sudden impacts and the product should be dedusted regularly. protection status and light automatically enters the shutdown procedure. Maintenance of the flash must be performed by our authorized maintenance department This product, except consumables e.g. battery, power cable and connect cable, is supported Technical Data LED Light Power Supply Output Power Channel Group ID Color Temperature Light Adjustment Range 100% Illuminance(LUX)

(with standard reflector, testing distance, 1m) CRI TLCI Light Effect Mode Control Method AC100V~240V(50/60Hz) SL100D 100W 32 16(0~9/A B C D E F) OFF/1-99 5600K 0%~100%

Max.32100 96 97 8 Temperature of Working Environment

-10 - 40 Bluetooth Transmission Distance 2.4G Wireless Transmission Distance Beam Angle Dimension Net Weight Smartphone APP/2.4G Wireless 30m 30m 120 243*205*127mm 1.6kg (not include reflector) BT Frequency Range 2402.0-2480.0MHz Max. Transmitting Power 5dbm Changes made to the specifications or designs may not be reflected in this manual. which can provide original accessories. Unauthorized service will void the warranty. If the product had failures or was wetted, do not use it until it is repaired by professionals. Changes made to the specifications or designs may not be reflected in this manual. FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

- 15 -

- 16 -

Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe-keep it. Thank you!

Model Product Code Number Name Contact Number Inapplicable Cases Warranty Product Information Customer Information Seller Information Name Contact Number Address Address Date of Sale Note:

Note: This form shall be sealed by the seller. Applicable Products The document applies to the products listed on the Product Maintenance lnformation

(see below for further information). Other products or accessories (e.g. promotional items, giveaways and additional accessories attached, etc.) are not included in this warranty scope. Warranty Period The warranty period of products and accessories isimplemented according to the relevant Product Maintenancelnformation. The warranty period is calculated from the day(purchase date) when the product is bought for the first time,And the purchase date is considered as the date registered onthe warranty card when buying the product. How to Get the Maintenance Service If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid card. If you cannot provide valid warranty card, we may offer you maintenance service once conrmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation. warranty The guarantee and service offered by this document are not applicable in the following cases: . The product or accessory has expired its warranty period; . Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, ooding and damp environments, etc; . Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment; . The original identifying information of product or accessory is modied, alternated, or removed; . No valid warranty card; . Breakage or damage caused by using illegally authorized, nonstandard or non-public released software; . Breakage or damage caused by force majeure or accident; . Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope. Maintenance and Service Support Information The warranty period and service types of products are implemented according to the following Product Maintenance Information:

Product Type Parts Name Circuit Board Battery Other Items Electrical parts e.g.battery charger, power cord, sync cable, etc. Flash tube, modeling lamp, lamp body, lamp cover, lockingdevice, package, etc. Maintenance Period(month) 12 Warranty Service Type Customer sends the product to designated site Customer sends the product to designated site Customer sends the product to designated site Without warranty 3 12 No Godox After-sale Service Call 0755-29609320-8062

SL
系列摄影灯

SL SERIES VIDEO LIGHT

产品型号 / Model.:SL100D

最⼤输⼊功率 / Input power Max.:110W

Ta=40°C

株式会社神州

R-R-gdx-SL100D

R-R-LK6-LK8620

210-164327

FCC ID: 2ABYN036

内部⾼压！请勿拆卸和修改设备！使⽤本产品之前，

请仔细阅读使⽤说明书，并遵守所有安全规定。

High voltage inside! Do not disassemble and modify

the device! Read the instruction manual carefully

before using this product and follow all safety rules.

警 告

Caution

GODOX Photo Equipment Co., Ltd.

Add: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai

Street, Bao'an District, Shenzhen 518103, China Made in China

Not less than 3 * 3 mm

GODOX PHOTO EQUIPMENT CO.LTD

Office of Engineering Technology

Federal Communications Commission

7435 Oakland Mills Road

Columbia, MD 21046

USA

Subject; Request for Confidentiality

FCC ID: 2ABYN036

To Whom It May Concern,

Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we

are requesting the Commission to withhold the following attachment(s) as confidential

documents from public disclosure indefinitely.

Date: 2021/07/28

These documents contain detailed system and equipment descriptions and are considered as

proprietary information in operation of the equipment. The public disclosure of these documents

might be harmful to our company and would give competitors an unfair advantage in the market.

Schematic Diagram

Block Diagram

Parts List

Operational Description

SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES

In additional to above mentioned documents, in order to comply with the marketing regulations

in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that

business sensitive information remains confidential until the actual marketing of newly

authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos

Test Setup Photos

Internal Photos

User Manual

For 45 days, pursuant to Public Notice DA 04-1705.

OR

For 180 days pursuantto KDB 726920 D01.

It is our understanding that all measurement test reports, FCC ID label format and

correspondence during the certification review process cannot be granted as confidential

documents and this information will be available for public review once the grant of equipment

authorization is issued.

Sincerely,

Signature:

Name: Hongwu Wen

Title: manager

Email: whw@godox.com

Letter of Authorization Company: GODOX PHOTO EQUIPMENT CO.LTD Address: 1st to 4th Floor, Building 2/1st to 4th Floor, Building 4 ,Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Baoan District, Shenzhen, 518103 China Product Name: SL Series LED Video Light Model Number: SL100D FCC Identifier: 2ABYN036 We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Hongwu Wen Date: Jul. 28.2021 Title: manager Signature of applicant: