FCC ID: 2ABYNAMI Smartphone Flash

GODOX PHOTO EQUIPMENT CO.LTD Add:

Luohu District, Shenzhen 518001, China 19th Floor, Room 1902, Building Jinshan, 5033 Shennan, East Road,

/Tel: +86-755-29609320(8062) /Fax: +86-755-25723423

/E-mail: godox@godox.com 705-AMI000-00 Made in China Instruction Manual Smartphone Flash

, Ami APP Ami4.0APP 6000200K 50

() 1

- 01 -

- 02 -

10 11 12 13 13 APP 01 02 05 06 06 07 08 A:

Ami

- 04 -

(**)

- 03 -

Type-C USB

/

:

:

:

:

1. 2. 3. 1 1 10

*2ON/OFF< >, 30

(1) (2) (3) *2 (4) Type-C USB

- 05 -

ON/OFF< >

- 06 -

Auto(: A) Ami A:

APP 2 Normal 3 s 10 s ISO 160

+

-

0.0 1. Ami 2. APP Store Godox Ami, APP 3. Ami APP ISO 160

- 07 -

- 08 -

4. 5. Ami Ami 6. APP 7. Ami 12:00 12:00 Ami-0F35 Ami-4C60 Ami-4C08 APP 1. APP 2. APP

(1) AmiID Ami-xxxx(x:0--9,A--F);Ami Ami

(2)

(3)

(4) ISOISO25640

(5) -2+2

(6)

(7) Normal 3S 10s

(8)

(5)

(4)

(3)

(8)

(7)

(6) Normal 3 s 10 s ISO 160

+

-

0.0

- 09 -

- 10 -

(2)

(1) 1. 2. 3.

: 102 401

(8s)3 8060 240

() Ami 5.3 (m ISO100) 1m 5W 6000K200K

(3.8V/610mAh) 500

< 10uA

<3s

<20mA 60x46x17mm 60g

- 11 -

- 12 -

() Ami APP 11 Foreword Before using this product Please read this user manual carefully in order to ensure your safety and the proper operation of this product. Keep for future reference. Thank you for purchasing a GODOX product. Godox Ami smartphone ash is light and portable with built-in lithium battery. The Ami ash offers:

Operation with phone APP: With built-in Bluetooth 4.0 Module, which enables Ami to connect the smartphone through Bluetooth, thus setting ashes or LED video lights parameters on the APP interface. Lightweight and portable: Built-in lithium battery with no carriage burden. Stable color temperature: 6000200K over the entire power range.

- 13 -

- 14 -

Warning Always keep this product dry. Do not use in rain or in damp conditions. This product contains high-voltage electronic parts. Touching the high-voltage circuit inside it may result in electric shock. Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center. Stop using this product if it breaks open due to extrusion, falling or strong hit. Otherwise, electric shock may occur if you touch the electronic parts inside it. Do not leave or store the ash unit if the ambient temperature reads over 50C

(e.g. in automobile). Do not re the ash directly into the eyes (especially those of babies) within short distances. Otherwise visual impairment may occur. When taking pictures for babies, keep the ash unit at least 1 meter (3.3 feet) away from them. Using bounce ash to reduce light intensity is also recommended. Do not use the ash unit in the presence of ammable gases, chemicals and other similar materials. In certain circumstances, these materials may be sensitive to the strong light emitting from this ash unit and re or electromagnetic interference may result. Please disconnect the charger after getting fully charged. Conventions used in this Manual This manual is based on the assumption that both the camera and camera flashs power switches are powered on. Reference page numbers are indicated by p.**. The following alert symbols are used in this manual:

The Caution symbol indicates a warning to prevent shooting problem. The Note symbol gives supplemental information.

- 15 -

- 16 -

Contents Foreword Warning Name of Parts Body Included Accessories Battery Power Management Flash Mode A Mode: Auto Flash Ami Connects with Smartphone 14 15 18 19 19 20 21 23 24 25 26 26 APP Instruction Protection Function Technical Data Troubleshooting Maintenance Body Type-C USB Port Status Lamp of Phone Bluetooth Connection/

Flash Ready Indicator Blue light is blinking:

Bluetooth is disconnected. Blue light is off:

Bluetooth is connected. Red light is lit:

the recycle is nished. Red light is blinking:

it is recycling. Battery Level Indicator Power Switch Name of Parts Flash Unit Optical Sensor Magnetic Surface Reset Included Accessories

- 17 -

(1) Flash (2) Clip (3) Paster*2 (4)Type-C USB Cord

- 18 -

Battery Features 1. This ash unit uses non-detachable built-in Li-ion polymer battery which has long runtime. 2. It is reliably safe. The inner circuit is against overcharge, overdischarge, overcurrent, and short circuit. 3. Take only 1 hour to fully charge the battery by charging through the micro USB port. Battery Level Indication Battery Level Indication on the OLED display Blue light Purple light Red light Red light blinks Meaning Full battery Medium battery Low battery The battery level is going to be used out immediately. And the ash will auto power off in 1 minute. Note: Please recharge the battery as soon as possible

(within 10 days). Then, the ash can be used or be placed for long period. Power Management

*Long press the < > Power Switch for 2 seconds to control the on/off of the ash unit. Turn off if the ash unit will not be used for an extended period. The ash unit will enter sleep mode after a certain period (approx. 30 minutes) of idle use. Note: Short press the ON/OFF button < > can test the ash.

- 19 -

Flash Mode This ash has one ash modes: Auto (auto ash: A). The camera and the Ami will work together to calculate the correct exposure for the subject and the background. A: Auto Flash Exposure Compensation Setting Set the ash exposure compensation amount on the camera interface of the smartphone APP between2 steps. Normal 3 s 10 s ISO 160

+

-

0.0

- 20 -

Flash Connects with Smartphone 1. Press the < > Button to turn on the Ami ash. 2. Search Godox Ami in iPhones APP Store and download the APP. Or install the APP by scanning the QR Code with your smartphone. 3. Open the APP and choose < >. Bluetooth ISO 160 4. Search Bluetooth of devices. 5. Approach the Ami ashes to the smartphone nd the Bluetooths whose name begins with "Ami"

and choose the one which has the strongest signal to connect. 6. Back to the APPs Camera interface after being successfully matched. 7. When successfully matched, Amis Bluetooth indicator is off while the red recycle indicator is lighten. Camera 12:00 Bluetooth Pending connection device Search Other device 12:00 Bluetooth Clear Camera Ami-4C60 Other device Ami-4C60 Ami-4C08

- 21 -

- 22 -

APP Instruction 1. Open the operation interface of APP. 2. APP

(1) Bluetooth link icon: click to enter the Bluetooth link interface and choose the corresponding Bluetooth ID to link Ami ash. For example, Ami-xxxx (x:0--9,A--F). When there are several Ami ashes in the same occasion, approach the Ami ashes to the smartphone and choose the one which has the strongest signal to connect.

(2) Shooting button.

(3) Picture view.

(4) ISO: ISO ranges from 25 to 640

(5) Flash exposure compensation: -2 to +2

(6) Front/back camera lens switching icon:

click to switch

(7) Delay setting icon: Normal, 3s and 10s for choice

(8) Flash icon: yellow for reclycling while orange for ash is ready.

- 23 -

(5)

(4)

(3)

(8)

(7)

(6) Normal 3 s 10 s ISO 160

+

-

0.0 Protection Function 1. Low Battery Protection When the battery level is too low, the ash cannot be used and the battery level indication is blinking. 2. Short Circuit, Overcurrent and Overvoltage Protections With built-in hardware to protect circuit. Auto power off will occur when running into short circuit, overcurrent and overvoltage. 3. Over-Temperature Protection:

Over-temperature protection: when the intervals between the two ashes is within 10 seconds, the over-temperature protection will be activated after ring 40 times in full power with approx. two-meter distance. When over-temperature protection occurs, the blue lamp, not the battery level indicator, will blinks in 1 second's cycle until the over-temperature protection is relieved. Now if continues to re ashes, the recycle time will be longer (max. 8s). And the over-temperature protection will be relieved if stops ring for 3 minutes. The over-temperature protection will be activated when the temperature of ashs internal component is over 80C and be relieved below 60C. The over-temperature protection will be activated when ring in full power for 40 times with approx. two-meter shooting distance.

(2)

(1)

- 24 -

Technical Data Model Guide No. (1/1 power output) Flash power Flash color temperature Power source Full power ashes Whole shutdown current Recycle time Battery level indication Whole sleep current Dimensions W x H x D Net Weight Wireless Frequency Range Max. Transmitting Power Ami Fn=5.3 (ISO100) darkroom, 1m 5W 6000K200K Lithium Battery (3.8V/610mAh) 500 10UA 3s 20mA 60x46x17mm 60g 2402.0MHz-2480.0MHz(Bluetooth wireless)

-4.86dBm(Bluetooth wireless) Troubleshooting If there is a problem, refer to this Troubleshooting Guide. The ash exposure is underexposed or overexposed. There was a highly reective object (e.g. glass window) in the picture. Do not cover the light sensitive part. The light sensitive part shall be placed towards the photographed object. Clean the dirty places of light sensitive part with cotton swabs. As the max. shutter of APPs camera part is relatively low, overexpose is easy to be occurred in outdoor light. Maintenance

- Shut down the device immediately should abnormal operation be detected.

- Avoid sudden impacts and the product should be dedusted regularly.

- It is normal for the ash tube to be warm when in use. Avoid continuous ashes if unnecessary.

- Maintenance of the ash must be performed by our authorized maintenance department which can provide original accessories.

- This product, except consumables e.g. ash tube, is supported with a one-year warranty.

- Unauthorized service will void the warranty.

- If the product had failures or was wetted, do not use it until it is repaired by professionals.

- Changes made to the specications or designs may not be reected in this manual.

- 25 -

- 26 -

FCC statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment . This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user

- 27 -

is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help.

- 28 -