Specifications are subject to change without notice. 2019-8 Q41M10SP12801A Color Monitor Quick Start Guide 3M Tape 3M VHB Surface Cleaner AC Adapter Power Plug
(Provided by regions) x 2 Screws for locking the wall mount
(one extra) x 5 x 5 Allround Screw Screws for Plug Plugs
* Differences according to regions. Display design and accessories may differ from those illustrated above. Step 1
*Mounting and installation Supporting screw: 4*25mm Installation height: <2m Option 1: Fix the GOGET wall mount on the wall with screws and allround screw plugs. Option 2: Use 3M tape to attach the GOGET wall mount to the glass. Option 3: Use VESA mount (not included) Supporting VESA standard VESA MIS-D75(75*75mm) Supporting screw: M4*5mm Step 2 Insert the cables from the bottom or the back. Step 3 Step 4 Step 5 Lock the screw on the top. Attach the monitor to the wall mount. Apply an even pressure over the surface/side corners until all 6 snap fit joints lock in place. 5 Waste Electrical and Electronic Equipment-WEEE Disposal of Waste Equipment by Users in Private Household in the European Union. This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product. Europe EU Declaration of Conformity This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive (2014/35/EU), RoHS directive (2011/65/EU), and Radio Equipment Directive
(2014/53/EU). Warning:
This equipment is compliant with Class A of EN55032. In a residential environment this equipment may cause radio interference. Federal Communications Commission (FCC) Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Radiation Exposure Statement:
This equipment complies with FCC/CE-RED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Power Adapter information:
Model No.: ADS-26SGP-12 12024E INPUT: 100-240V~50/60Hz 0.7A OUTPUT: 12V 2A 75mm VESA mount
(Screw spec: M4) Speaker Reserved Expansion Port For SW upgrade only. Micro USB