FCC Radio Frequency Exposure Information this information before using this product,
(Communications Commission (FCC) 3-328 adopted an update safely stan Do not use the phone wih a damaged antes damaged antenna comes into contact withthe skin, @
minor burn may resul. Please contact your local dealer for replacernant antenna. Safety Information Your radio contains alow power transmiter, When the Pus fo-Tak button s pushed Is push t sends out radlo frequency (RF) signals. The dovco s auhoized o operate ata duly factor notte exceed 50%. In August 1996, the Federal Communications Commissions (FCC) adopted Therefore exposure gudalines with safety levels for hand-held wireless devices Body-worn Operation Tomaintan complance wih FOC's Therefore Exposure requirements hold the transmiter and antenna at feast Inch @54 em rom he ear the handset on your body while using the headset accessory, use only the suppled belt cp fr this product and when trnsmlin, tate Rout ofthe bet cp to ensure thal the antenna Em) from your body. The bolt clip is for storage purpoce only. 00 NOT TRANSMIT BELT CLIP. POWER AMP Specification : Voltage : 6V; Curent: 1A.
@ Model name : GMRS220 and GMRS220FM - 2001 July, USER MANUAL UHF FM Radio Transceiver - GMRS Models : GMRS-220 / GMRS 220FM FLY TALK Call Button / Emergency Beep The call button is as similar as a phone ring, pable of identifying you from the others and others to you. To set up the d tone, press the menu until you 800 a call on your transceiver, selact the tone by pressing the up and down key arrow. After selecting the desired call tone press the menu until your are back at the transceiver mode or by pressing the PTT button when you push the call butlon you pares on he same frequency fyou are in a emergency and you need outside assistance, press and hold the call button for atleast 8 sec, you will enter the emergency beep, your will hear beep sound one to another and also your transceiver will scan allthe channel. (* Note: if you do not want to hear the emergency beep, simply by turning the volume down), It hore is a signal from other channel, your transceiver will lock on that channel for approx. 6 sec. Ifyou lke to talk to the lock channel, press on the PTT bottom and at the same time your are canceling the emergency beep. If you are unable to talk to OMRS License: hear the call tone which you have Used of MRS. years of age or AGMRS syste Light / Lock Function Light function: simply push the Light / Lock button activates the back ght. runless . _Lockbutton function: Ifyou dont want accidentally change the frequency or channel, anyway mresse te output of fistraneceiver. ts ouput is prose re ockbuton fr approx. 2 sec, and he some tie ndcate = mark its set by the FCC. fon the LCD panel, you have successfully lock the particular channel you have selected. To cancel the lock function, repeat the above step to dysfunction the Lock function. repeat the above step to dysfunction the Lock function. Lock button function If you dorit want accidentally change the frequency or channel, press the lock button for approx. 3 sec., and at the same time indicate a @ mark on the LCD Do not use this device or change its batteries in potentially explosive atmospheres as sparks Panel, you have successfully lock the parteular channel you have selected. To Insuch areas could resultin avexplosion. spa cancel the lock function, repeat the above step to dysfunction the Lock function
& Do not operate the transe Do not attempt to modi designed to meet 4907 /3UB!] / AousBiewaz / 12D UoNOUNY YO Jamo ONeWOINY/ ApO}aIN |12D Call Music FUNCTION KEY AND LOCATION Setting the status of call music, simply press the menu button until the ~N LCD flashes the " CALL"indicator. Press up button or down button key to choose the Music ring as you Antenna + LCD Panel need. i = Volume Once the desired call ring is chosed , press PTT button to return to Earphone/Microphone FTL (Uy Communication Mode|
main menu or press menu to go to the next function menu.
~ Call rings Music will play the music when selection has been f choose. Push to talk (PTT) +
Automatic Power Off Function Monitor button + (
Light / Lock Button Press the menu button until yousee the APO @& mark flashing Scroll button (Up Button) Press the up or down key to select the desired time ( 1- 8 HRS) for automatic shut off. Or select "-"for continuous on. After selecting the desired time , press the PTT button to return to the stand by mode or you can press the menu button to also return to the stand by mode. Once you have selected the desired SHUT OFF time, it will shut of at that time. But keep in mind, if you press any buttons during stand by, your transceiver will re-start the SHUT- OFF time. give you a warning beep sound before shut off simply push the PTT atthe selected time. Menu Button Scroll button
(Down button) button. Otherwise your transceiver will s NOILW9O1 GNW ASy NOILONNS LCD Operation Selecting FM radio capability (Only for with FM function model) |
Press the menu button until you see the FA flashes onthe LCD panel. Press the up or the down button to begin scanning the radio frequency. When the transceiver receive a radio signal, the scan will stop. And at the same time, you are able to listen to that particular radio channel. Ifitisntthe radio channel you desired, rescan by pressing the up or the down button,
+ If when you are listening to the radio and someone is trying to reach you on the transceiver, you transceiver automatically switch fo the transceiver mode. If you desired not to answer the call simply ignore and it wil automatically switch back to the radio mode, By pressing the PTT button retums you to the FRS mode. Or if you wish, press the menu button will disable the radio function. Aeidsiq qo
(Auto poner off indicator Selecting WX radio capability (Only for with FM function model) Lock indicator
{Call party! Press the menu button until you see the @
[aling sting calpain |
Receiver indicator Press the up or the down button fo begin scanning the WX station aoa (Weather Radio station) You can select one of
[Curent charmel (1-15) & FM radio (only or GMRS-220FN) By pressing the PTT button returns you fo the FRS mode. Or if you Ayyiqedeo oipes XM / WA
[Curert code indicator. CTCSS oode (01 8) or non- CTCSS fanaion (00) wish, press the menu button will disable the radio function.
=a
[Battery meter indicator
[Voice activated transmission indicator |
OISSIWISUBL | PAJBAOY SalO/ \ UIS OINY
[uc Selecting the Auto Scan Mode (Scan) Press the Menu button until you see "Scan' ing onthe LCD panel.
@ Presses up or down button to begin auto scan. Itthere is any signals during scan, the LCD panel will flashing the channel waiting for you input, if you wish to use this channel. Ifyou do decide to use this signal, simply press the PTT button. Ifyou wish to stop scan, press the up or the down button. Voice Activated Transmission (VOX) --optional function Press the Menu button until you see "VOX" display on the LCD panel. Presses up or down button to select "-", Ifyou want to tum off the VOX funet Press the PTT button to confirm. the less one. Once you decide the sensitivity then press the PTT button to confirm.
@ When you turn on the VOX function then the "VOX" will be displayed on the LCD panel This function allows hands free conversation. Battery Install / Battery Capacity Indicator Fly Talk radiorequire 3 AA for GPFRS200 serles or 4 AAA for change the lon fost, Battery Install 1.Carefully release batteries safely lock, then remove Battery cover Battery safety lock Note: Take off the belt clip as your need. 4919 Ayoedeo Aueyeg /[/eysu| ueyeg 2. Install (or remove) 4 AAA alkaline batteries or Ni-MH rechargeable Selecting the CTCSS frequency
batteries. @
Note: Press the menu button to enter the setup mode. g Never atemplto charge akatine o Select the CTCSS frequency 5 ry cell batteriss. When recharging a o Guy cel atterie. When recharging Press he up othe own button to select one of the 38 CTCSS supplied with your transceiver. Ne heen
/ 7 fit is the desired frequency, simply press the PTT button OQ
| a 1D Do not force it As you might damage CTCSS will not guaranteed privacy but it guaranteed noise 3 3 aeemble gs the proneaura open Selecting 00 returns to the regular mode, a
= CTCSS Table 3 3. Slide batteries cover over until secure, To lock the battery cover close the =
% | flap as show until your hear a cle No. Frege) Fregtt) | Ne._} Frea(tel|. Ne. g ot i, A : . 2
. Click of insert 71.9 400.0 | 22 32 =
iat TA 103.5 | 23 33 2
| | 77.0 107.2 | 24 34 a
| 79.7 10.9 | 25 35, s
| 82.5 4148 | 26 | 1622 | 36 gz
| 85.4 27 167.9 37 S 1 885 28 | 1738 [38 ad 91.5 2g | 179.9 Ss Battery safety loc! 348 oo eee | |
Aouenbe,y eB Buljposajes Selecting a frequency You can select one of the 15 channels. Please have in mind that you party must have the same channel to be able to converse. Once you've selected the same channel, you can start using you Ifyou do not wish to change to different channel or using the CTCSS, or might accidentally changed to other channel, press the lock button so that you wont inadvertently change the channel. Inthe CCTSS mode, change the mode back to 00 so that you can use the basic channel. Frequency Table Freq.(MHz)|No._|Freq.(MHz)| No. _[Freq.(MH2)]
462.5625 | 7 | 462.7125 | 13_| 462.6500 462.5875 | 8 | 462.5750 | 14 | 462.7000 462.6125 | 9 [462.6250 | 15 | 462.7250 462.6375 | 10 | 462.6750 462.6625 | 11 | 462.5500 462.6875 | 12 | 462.6000 oon] [afro 9 Belt Clip Install Aim the screw to the screw socket provided back of the transcaiver. Depending on your need. You can use the ip either vertically or horizontally by holding the belt clip vertical or horizontal, and insert the screw to the screw socket by twisting the screw clock wise and counter clockwise to loosen. Socket Screw socket Socket Screw socket Weysul did Weg a |
a __ Quick Start Quick Start By pressing the power button for over a second, your transceiver willbe in the ON positon. By twisting knob and adjust the radio volume. ( Clock wise for oud volume and counterclockwise for soft) You also may use the up and down arrow button to select on one ofthe 14 channel Youmay also use the scan bution to select an open frequency. Your party must use the same frequency and the same CTSS frequency. After completing the fst three steps, you can star receiving Transmission.
|tyou need to transmit of answering to your party, press down the PTY button , the light of communication mode wil indicate in RED, atthe same time f mark will appear onthe LCD panel. Your voice wil ransmit to your pay's FRS. 7 You may also use the call button toring your parties
% Donat tak without Pressing dow the PTT button Only by releasing the PTT button, you are able then receWve your partes transmission, At same time the light of your communication mode willtum to green and you also will see the g# mark on your transceiver LCD panel. By completing the above step, you willbe able to tansmit and receive transmission through your transceiver If you need to tum off your transceiver, press and hold the power button for st least 3 sec Your transceivers able to tum the power off automaticaly, but you must frst manually set the desired time. Once the time expired, your transceiver will turn the power off automatically. FCC Licensing Information This GMRS-220 radio operate on GMRS frequencies which require a license from the Federal Communications Commission (FCC) for business ,personal, and recreational use. AGMRS license held by an individual may be shared by immediate family members. At the date of thi the application for your FCC license is made on FCC from 05{with optional ). To obtain forms, cal the FCC forms hotline at: 1-800-418-
3676 of go to hitp:/uw.foc.gov For questions conceming licensing , contact the FCC at 1-888-CALL-FCC (1-888-225-5322),
(0 g0 to httoxsAwww.ce.gov