Overview Channel switch Power indicator (Orange) Transmitting indicator (Green) RSSI (Red) Link (Red) FCC Radiation Exposure StatementThis equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 30 centimeters between the radiator and your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.The antennas used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.Professional installation instruction1.Installation personalThis product is designed for specific application and needs to be installed by a qualified personal who has RF and related rule knowledge. The general user shall not attempt to install or change the setting.2. Installation locationThe product shall be installed at a location where the radiating antenna can be kept 2m from nearby person in normaloperation condition to meet regulatory RF exposure requirement.3. WarningPlease carefully select the installation position and make sure that the final output power does not exceed the limit setforce in relevant rules. The violation of the rule could lead to serious federal penalty.POCSAG TransceiverTX-200EN Series User ManualEnglishThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.FCC ID: NDATX200ENV I/O port function description - Model: TX-200EN Pin No Pin 1 Signal Type Pin Name I/O Type None
Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Pin 9 TXD RXD None GND Carrier DET None Flow control AUDIO OUT Ouput Input
GND Ouput
Ouput Ouput RS232 RS232
GND 0-5V (TTL)
RS232 Description
RS232 control signal RS232 control signal
Signal reference point Carrier detection output
RS232 control signal 1Vp-p @ 10k load Receiver audio signal output System Specifications - Transmitter Frequency Range Output Power Modulation Type FSK,FM Deviation Frequency Tolerance Frequency Stability Harmonic Spurious VHF 135 ~ 175MHz 10dBm ~ 37dBm (10mW 5W) FM,2FSK
+/- 2.5kHz, 4.5kHz, 5kHz VHF: < 5ppm ,UHF: < 3ppm VHF: < 5ppm ,UHF: < 3ppm
< -57dBc or -36dBm
< -60dBc System Specifications - Receiver LO Frequency Temperature Stability Receiver Sensitive Image Rejection Spurious Rejection Adjacent Channel Rejection Intermodulation Response Rejection 2nd IF Frequency IF Bandwidth Power Voltage Current Dimension
< 3ppm
< -118dBm @12dB SINAD
>60dB
>60dB 12.5kHz Channel Spacing: >52dB ,25kHz Channel Spacing: >60dB
+/-25kHZ/50kHZ : 60dB, +/-50kHZ/100kHZ : 60dB 455kHz 15kHz 12 V 2.5 A 11 x 9 x 3 cm