Table of Contents Safety Instructions A1 Product Configuration B1~2 Full Configuration and Specifications....................................... B-1 Function Description.............................................................. B-2 How to Install C1 How to Install........................................................................C-1 How to Operate How to Operate.............. .....................................................D-1 Safety Instructions Cautions
Do not install it under direct sunlight. Do not install it where the ambient temperature is too high or low. Do not install it where is too humid. Do not install it where the power is not stable. Do not impact it externally. Care must be taken not to allow water or debris infiltrated in it. Do not spill alcohol or benzene over it. Do not assemble or repair it. Prior to use, check if the adaptor and the power are correct. Note The contents in this manual are subject to change without notice for product feature enhancement. A-1 Product Configuration 1. Full Configuration and Specifications 1. Full Configuration and Specifications Item Name Appearance RF Reader UDR-100IF 1. Terminal : 1 EA Components 2. Manual : 1 EA 3. Adaptor : 1 EA Feature
- RF Reader for Golfzon Member Card Recognition Specifications B- 1 Product Configuration 2. Function Description 2. Function Description 1) Contents The product supplied contains followings Manual 2) Parts Names RF Card Sensor IC Card Reader (Option) B-2 How to Install 1. How to Install 1. How to Install
Install it on the flat side where to be used.
Turn off the power of the external device.
Connect the communication cable to the communication port of the external device.
(External devices : Computer, CAT or POS)
It is necessary to install the corresponding driver if connecting by the USB port. C-1 How to Operate
When the power is supplied, [Ready] lamp is lit and it is ready to receive command from the external device. Ready Processing Done Error Ready Processing Done Error
When the reader recognizes the card,
[Progress] lamp is lit and [Ready] lamp is off.
When the read completes payment information exchange with the card, [Done]
lamp is it.
While waiting approval, [Done] lamp is continuously lit. Ready Processing Done Error Ready Processing Done Error
When normally approved, [Ready] lamp is lit Ready Processing Done Error again.
If error, [Error] lamp is lit, and after for a Ready Processing Done Error moment, [Ready] lamp is lit. Ready Processing Done Error D- 1